Related
hi all , sorry for my bad english
first i flash my phone p765 to firmware open euro v20h to unlock boat loader and everything is running normally , I have checked boatloader from the dial pad and there have been told that I have unlocked boatloader .
then I flash back to my country idn firmware v20b , then I check the boat loader back and re- locked status . I repeat unlock boat loader and install cwm as before in the fw 20b idn but that did not work
then i tried to install cwm with lgpwn.apk but I could not install super su ( su binnari not found ) .
finally i installed the cwm from menu supersu install zip from sd card and it worked .
but after I tried to flash a custom room turned out that I put the zip file is not readable on which I installed cwm through ubl process , and am amazed that I have two versions of cwm on my cell phone which is the first of the ubl cwm ( support touch screen) and the lgpwn.apk second cwm ( not support touch screen) and zip files can be seen in this cwm but I can not install cusrom from there
my question
1 . if I could unlock boatloader in position 20b fw idn ( previously I had do it in europe fw v 20h )
2 . how do I uninstall cwm lgpwn.apk ( which does not support touch screen) while I did not find lgpwn.apk in my application list .
please help me to resolve this problem
Adunk Thok said:
hi all , sorry for my bad english
first i flash my phone p765 to firmware open euro v20h to unlock boat loader and everything is running normally , I have checked boatloader from the dial pad and there have been told that I have unlocked boatloader .
then I flash back to my country idn firmware v20b , then I check the boat loader back and re- locked status . I repeat unlock boat loader and install cwm as before in the fw 20b idn but that did not work
then i tried to install cwm with lgpwn.apk but I could not install super su ( su binnari not found ) .
finally i installed the cwm from menu supersu install zip from sd card and it worked .
but after I tried to flash a custom room turned out that I put the zip file is not readable on which I installed cwm through ubl process , and am amazed that I have two versions of cwm on my cell phone which is the first of the ubl cwm ( support touch screen) and the lgpwn.apk second cwm ( not support touch screen) and zip files can be seen in this cwm but I can not install cusrom from there
my question
1 . if I could unlock boatloader in position 20b fw idn ( previously I had do it in europe fw v 20h )
2 . how do I uninstall cwm lgpwn.apk ( which does not support touch screen) while I did not find lgpwn.apk in my application list .
please help me to resolve this problem
Click to expand...
Click to collapse
Yes you can unlock bootloader in p765 v20b, I too unlocked bootloader on that version and the dialer code never worked for me so try going in s/w upgrade mode, there it'll yell u if its locked or not.
thanks bro ... that's work
Sent from my LG-P760 using xda app-developers app
Adunk Thok said:
hi all , sorry for my bad english
how do I uninstall cwm lgpwn.apk ( which does not support touch screen) while I did not find lgpwn.apk in my application list .
please help me to resolve this problem
Click to expand...
Click to collapse
Removing recovery(lgpwn.apk):
Delete /system/bootstrap directory
Delete /system/bin/e2fck
Rename /system/bin/e2fck.bin to e2fck
Done!
oke I will do it ....
Sent from my LG-P760 using xda app-developers app
Hi, I have successfully rooted 5.0.2 rom on galaxy grand prime with cm autoroot for kit kat.
1. flash new 5.0.2 update with odin (if you had root on kit kat flash 2 times, it wont work first time) http://www.sammobile.com/firmwares/download/54047/G530FZXXU1BOG2_G530FZOXA1BOG2_PHE/
2. boot 5.0.2 set up google account and install super su
3. download flash cm autoroot https://download.chainfire.eu/664/CF-Root1/CF-Auto-Root-fortunalte-fortunaltedx-smg530f.zip?retrieve_file=1
4. boot again - phone will reboot 3 times before booting into system and updating super su, launch and set up super su
5. download recovery.zip, extract and flash it, WARNING use this recovery only with G530FZXXU1BOG2_G530FZOXA1BOG2_PHE, it is extracted from this rom and it should fix boot loop after flashing the cm autoroot package
6. reboot and you have rooted lollipop on G530FZ
MAKE SHURE YOU FLASH recovery from step no 5 otherwise you will end up in boot loop
p.s. I am now working on xposed installer
It worked. Thank you very much
Thank you it works !
Done, but i do not had to flash the recovery, the device has not entered bootloop
Same question as always: and knox? Is trigered right?
Edit: nevermind. I already have my answer.
zapetino said:
Done, but i do not had to flash the recovery, the device has not entered bootloop
Click to expand...
Click to collapse
can you enter recovery?
After this wonderfull root, do you know if an working xposed exist ?
PS: After flashing i think knox is triggerded (i trigered my knox when i flashed root in 4.4.4). Only Kingroot didn't triggered root.
hangy18 said:
can you enter recovery?
Click to expand...
Click to collapse
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
zapetino said:
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
Click to expand...
Click to collapse
how i flash this autoroot? via recovery or how?
Crimmy20 said:
how i flash this autoroot? via recovery or how?
Click to expand...
Click to collapse
Via ODIN
dcduartee said:
Via ODIN
Click to expand...
Click to collapse
and where i put this autoroot and recovery on odin? like witch section
Crimmy20 said:
and where i put this autoroot and recovery on odin? like witch section
Click to expand...
Click to collapse
PDA on older versions of odin or AP if you are using a newer version of odin
work on G530H?
It worked, and when you reboot the phone stopped working. When you try to run stands in the picture and nothing happens. Install recovery again by Odin, but nothing helps. Any ideas? (Sorry for the language, I have a translator)
hey guys does this method work on g530h ???
if not, can any1 link me to a guide to root my g530h i've been searching for 2 days plz hlp
Hey, it seems like I've got a problem, when I try to update SuperSU it fails :/
Did I do something wrong ?
hey can u plz tell me how did u extract the stock recovery from the rom i need it plz
Sent from my SM-G530H using Tapatalk
Yeh..how would one extract the stock recovery from the (.md5) file..is that possible.? or does one download the stock recovery (.img) file somewhere.?
sent by my: SM-G531M Grand Prime
(Lollipop 5.1.1)
I have this:
Model SM-G530FZ
Model name GALAXY Grand Prime
Country Spain
Version Android 5.0.2
Changelist 816937
Build date Thu, 17 Sep 2015 05:21:41 +0000
Product code PHE
PDA G530FZXXU1BOI2
CSC G530FZOXA1BOI2
Do I have to Flash the previous G530FZOXA1BOG2? Or can I skip this step and flash the autoroot directly? Would work the Recovery with my current version?
Just downloaded and installed Kingroot app...works fine
Long story - Tried to apply the latest Marshmallow rooted package for D6503 on my 6502 that was already rooted with XZ dual recovery. It installed successfully, was rooted too...but I forgot to add the patch that would fix the radio not working. So I try to reboot to recovery...and that doesn't work anymore. I tried installing TWRP recovery from the manager app, but it wouldn't reboot. Then I ran the XZ recovery installer externally, and now my phone is ****ed. Stuck at an infinite boot loop.
At this stage the only thing I can access is flashtool and fastboot, and since my bootloader is locked I can't flash a recovery that way (nor do I want to permanently lose DRM keys/camera quality as I've heard happens with unlocking the bootloader). I have a memory card and I used the option to disable loading the recovery specified on the XZ thread by adding a 'donotload' file on the sd card.
Still no use - I get a Sony logo for about 5 seconds, the screen goes dark and back to the same. At this point probably my recovery is screwed up or non existent and a bad situation has gone worse with the bootloop.
What can I try now?
@KaiserSnorezay
XZDR is still not compatible with MM, that's why you got a bootloop...
Also you can't install the "regular" TWRP with twrp manager on a LB as there is no recovery partition... it won't work and probably will mess your phone in the process.
The solution is to flash any KK / LP .ftf with flashtool (i would wipe everything when flashing as i have backups of my data/apps) , root it with kingroot or any other method you like, install xzdr for KK/LP and finally reboot to recovery and install the latest MM prerooted rom from niaboc which already has root&recovery (not xzdr btw) included. Since you have D6502 don't forget to install the baseband patch after the rom again
http://forum.xda-developers.com/xperia-z2/development/rom-official-6-0-1-23-5-0-486-beta-t3336770
Just did it exactly this way yesterday on my friends d6503 (minus the d6502 patch obviously) had 0 troubles MM, root and recovery working perfectly.
Thanks, will try this today. Is wiping data required or can i get by by just flashing the older one?
ptmaniac said:
The solution is to flash any KK / LP .ftf with flashtool (i would wipe everything when flashing as i have backups of my data/apps) , root it with kingroot or any other method you like, install xzdr for KK/LP and finally reboot to recovery and install the latest MM prerooted rom from niaboc which already has root&recovery (not xzdr btw) included. Since you have D6502 don't forget to install the baseband patch after the rom again
Click to expand...
Click to collapse
I managed to flash and root 17.1.2.A.0.314, but once again I'm unable to get any damn recovery to work. Installed XZDR, after that TWRP, in both cases it refuses to boot into recovery mode. What am I missing?
KaiserSnorezay said:
I managed to flash and root 17.1.2.A.0.314, but once again I'm unable to get any damn recovery to work. Installed XZDR, after that TWRP, in both cases it refuses to boot into recovery mode. What am I missing?
Click to expand...
Click to collapse
Weird, after you have your phone rooted it should be simple to install xzdr... just enable usb debugging in the phone and make sure you have the adb drivers correctly installed in your pc.
Download the latest xzdr from nut's thread ( http://forum.xda-developers.com/showthread.php?t=2261606 ) unzip it and run install.bat . After a successful install the phone should reboot to twrp automatically and it's done.
Okay, I fixed it..using Flashfire! No idea why the recovery didn't work earlier, but now finally I'm on Marshmallow. Thanks for the help!
KaiserSnorezay said:
Okay, I fixed it..using ! No idea why the recovery didn't work earlier, but now finally I'm on Marshmallow. Thanks for the help!
Click to expand...
Click to collapse
hey bro, just read your post. Yesterday i got an update msg in my software update menu of my Xperia Z2 D6502. After i updated i went into bootloop. i have very important stuff in my phone. i updated earlier too all the updates that sony servers inform about. so then i thought to flash with the stock file. Although i didnt knew the firmware number , i just flashed with 5.1.1 , 1st with Customized IN & later with of US. Both of them didn't work as well. Please help me out. I'm not much aware about this root stuff & all. hope to get reply soon from you or anyone in this forum.
-also i don't know the exact firmware number-
dodge911 said:
hey bro, just read your post. Yesterday i got an update msg in my software update menu of my Xperia Z2 D6502. After i updated i went into bootloop. i have very important stuff in my phone. i updated earlier too all the updates that sony servers inform about. so then i thought to flash with the stock file. Although i didnt knew the firmware number , i just flashed with 5.1.1 , 1st with Customized IN & later with of US. Both of them didn't work as well. Please help me out. I'm not much aware about this root stuff & all. hope to get reply soon from you or anyone in this forum.
-also i don't know the exact firmware number-
Click to expand...
Click to collapse
Try what ptmaniac suggested - flash an older FTF that can be rooted (more recent ones can't), root it, install recovery and then flash the newest build.
You'll have to improve your Google-fu to find a suitable firmware and a root technique for it.
KaiserSnorezay said:
Try what ptmaniac suggested - flash an older FTF that can be rooted (more recent ones can't), root it, install recovery and then flash the newest build.
You'll have to improve your Google-fu to find a suitable firmware and a root technique for it.
Click to expand...
Click to collapse
okay. you mean flashing any old firmware ( which i did and still in bootloop ) & root it. Then installing recovery for the same firmware ?
with "recovery" will i be able to get back my whole data ?
KaiserSnorezay said:
Long story - Tried to apply the latest Marshmallow rooted package for D6503 on my 6502 that was already rooted with XZ dual recovery. It installed successfully, was rooted too...but I forgot to add the patch that would fix the radio not working. So I try to reboot to recovery...and that doesn't work anymore. I tried installing TWRP recovery from the manager app, but it wouldn't reboot. Then I ran the XZ recovery installer externally, and now my phone is ****ed. Stuck at an infinite boot loop.
At this stage the only thing I can access is flashtool and fastboot, and since my bootloader is locked I can't flash a recovery that way (nor do I want to permanently lose DRM keys/camera quality as I've heard happens with unlocking the bootloader). I have a memory card and I used the option to disable loading the recovery specified on the XZ thread by adding a 'donotload' file on the sd card.
Still no use - I get a Sony logo for about 5 seconds, the screen goes dark and back to the same. At this point probably my recovery is screwed up or non existent and a bad situation has gone worse with the bootloop.
What can I try now?
Click to expand...
Click to collapse
hey i am having same problem with my xperia Z2 , it stucked in bootloop ,i have already tried to flash new firmware from xperifirm using flash tool,but i think my usb debugging is off, what can i do ,i cant start my phone so there are no chances for turning USB debugging on,what can i do, any solution,, just want my phone back,it will be okay if I loose my all data..please
DedSec_35 said:
hey i am having same problem with my xperia Z2 , it stucked in bootloop ,i have already tried to flash new firmware from xperifirm using flash tool,but i think my usb debugging is off, what can i do ,i cant start my phone so there are no chances for turning USB debugging on,what can i do, any solution,, just want my phone back,it will be okay if I loose my all data..please
Click to expand...
Click to collapse
Sorry, I ditched my Z2 for a Oneplus 3 in August 2016. Learnt my lesson, only going to use phones with easily unlockable bootloaders.
Ok guys, im at the end and need your help. I searched for this Problem since yesterday but couldnt find what describes my problems.
I think i did mistake after mistake, and yes im a noob, so feel free to dump on me what you got
Yesterday i wanted to update Sultan's CM ROM on my OPX, so i downloaded it and tried to install it over TWRP what gives me error messages. I made a factory wipe and installed OxygenOS 2.2.3 and then updated my TWRP to Sultan's new one (Version 3.0.2.3). After i flashed the .img, TWRP wasnt booting anymore, it was stuck on the 1+ Screen, but i was able to get to the System. So i get Root access over the SuperSU App and then flashed the TWRP zip over the Rashir App and TWRP worked again, then i flashed the new OxygenOS (3.1.3) what was successful. But now, TWRP wont work again. When i try to boot into recovery, it just show the 1+ Screen and Vibrates for maybe 1 second, but than it skips and boot automatically into System. The SuperSU App says its no SU File installed and can't be installed. Fastboot didnt't work either. When i connect it and type in ADB devices it shows me the ID. But with Fastboot devices nothing happens and im unable to do anything over it. (Drivers are correctly installed, without Signature check by windows etc.)
I know, i probably made some huge mistakes with all that. Do you guys have any solutions to get the Bootloader working again?
Thanks for any helps!
best regards
That recovery was for new BL and you flashed it over Old one.
Follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Adesh15 said:
That recovery was for new BL and you flashed it over Old one.
Follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Click to expand...
Click to collapse
Ok i will do that.
But just to be sure. After ive done this, im updating Oxygen to the newest Version and then install Sultan's newest TWRP and CM ROM?
Like i said, im not a Pro with it and i just dont want to fu** it up again.
Thank you.
Ulman2033 said:
Ok i will do that.
But just to be sure. After ive done this, im updating Oxygen to the newest Version and then install Sultan's newest TWRP and CM ROM?
Like i said, im not a Pro with it and i just dont want to fu** it up again.
Thank you.
Click to expand...
Click to collapse
Yup.
Will work fine.
Hi all,
trying to track down a TWRP recovery for Ulefone Gemini Pro? I've tried using the Umidigi Pro Z but it won't "stick", i.e. it is installing however it boots back to normal system & reinstalls the stock recovery.
I realise it is a newish phone so a custom recovery may not have been created as yet?
Any advice would be appreciated.
I have created a recovery for Ulefone gemini pro. You can try this and see how it goes:
https://mega.nz/#!8f43VYLa!o-elPp74o35tm3AdtcW1wVbFnBHIGi_dUP7skWWGmOM
The problem is that touch is not working. The issue is not with the Recovery image, but the device itself. If I flash the image to boot partition, touch works. I have tried flashing the boot image to recovery partition and it booted to the OS, but touch was not working. So it looks like kernel booting from recovery partition cannot iniialize the touch sensor. Kernel logs also shows that touch sensor failed to initialize. Will create a new thread to discuss this.
You also need a modified boot image for the recovery image not to be re-written. You can use this modified boot image here:
https://mega.nz/#!sHQxySJL!MRqtD6-VoZMLyEpr-ym7LlktiMR0GXYKUuLZlpbxhE0
vineethrp said:
I have created a recovery for Ulefone gemini pro. You can try this and see how it goes:
https://mega.nz/#!8f43VYLa!o-elPp74o35tm3AdtcW1wVbFnBHIGi_dUP7skWWGmOM
The problem is that touch is not working. The issue is not with the Recovery image, but the device itself. If I flash the image to boot partition, touch works. I have tried flashing the boot image to recovery partition and it booted to the OS, but touch was not working. So it looks like kernel booting from recovery partition cannot iniialize the touch sensor. Kernel logs also shows that touch sensor failed to initialize. Will create a new thread to discuss this.
You also need a modified boot image for the recovery image not to be re-written. You can use this modified boot image here:
https://mega.nz/#!sHQxySJL!MRqtD6-VoZMLyEpr-ym7LlktiMR0GXYKUuLZlpbxhE0
Click to expand...
Click to collapse
Hi,
thanks for this however neither seem to be working? I installed both, lost touch completely & couldn't boot into recovery? I then had to restart the phone & everything was back to normal.
Looks like more work has to be done in this area however I'm not the one that can do it! Nice try though!
mightymaki said:
Hi,
thanks for this however neither seem to be working? I installed both, lost touch completely & couldn't boot into recovery? I then had to restart the phone & everything was back to normal.
Looks like more work has to be done in this area however I'm not the one that can do it! Nice try though!
Click to expand...
Click to collapse
Thanks for trying it out. Actually, if you install the recovery.img to boot partition, touch works. So looks like the device has disabled touch hardware when booting from recovery. I have started a separate thread asking for help
https://forum.xda-developers.com/android/software-hacking/ulefone-gemini-pro-touch-booting-t3640374
mightymaki said:
Hi,
thanks for this however neither seem to be working? I installed both, lost touch completely & couldn't boot into recovery? I then had to restart the phone & everything was back to normal.
Looks like more work has to be done in this area however I'm not the one that can do it! Nice try though!
Click to expand...
Click to collapse
maybe this is kinda obvious for you, but you can use a mouse to use the twrp. took me days to realize this "genius" solution
nunom66 said:
maybe this is kinda obvious for you, but you can use a mouse to use the twrp. took me days to realize this "genius" solution
Click to expand...
Click to collapse
Hello!!! Is this true? Can you handle TWRP recovery with a mouse ??? I need to do root because I have lost the IMEIs.
Could a non-tactile recovery work like the CWM Recovery from Clockworkmod ???
could a non-tactile recovery work?
Regars from Spain
So we can root only if we have a :
- OTG cable
- A mouse
Can you guys do a instructive tutorial ? Like step by step and just not dropping the files and good luck ?
Because it's just not about me but the others that will come and they want to root their phones too
Ps : i know that i can use adb to flash my images etc .. i'm just not too sure about it , and for now i don't have a OTG cable so any of you have any news why the touch isn't working with twrp ?
Thank you , have a nice day !
toxic94400 said:
So we can root only if we have a :
- OTG cable
- A mouse
Can you guys do a instructive tutorial ? Like step by step and just not dropping the files and good luck ?
Because it's just not about me but the others that will come and they want to root their phones too
Ps : i know that i can use adb to flash my images etc .. i'm just not too sure about it , and for now i don't have a OTG cable so any of you have any news why the touch isn't working with twrp ?
Thank you , have a nice day !
Click to expand...
Click to collapse
Anyone managed to do this too? i also lost my EMEI;....
Found this on Russian 4PDA forum TWRP 3.1.1 I am not sure if it's touch is working or not as google does not translate it very well.
I do not own this device so I am unable to test it.
bigrammy said:
Found this on Russian 4PDA forum TWRP 3.1.1 I am not sure if it's touch is working or not as google does not translate it very well.
I do not own this device so I am unable to test it.
Click to expand...
Click to collapse
Hey man , nice found !
from what google translate translated in french this root work :
AVERTISSEMENT !! Après avoir installé rekaveri, sous réserve deautorisation des changements dans le système,installation obligatoire SuperSU, sinon le système ne démarre pas.
ATTENTION : After you install rekavery ( WTF is that ?? ) you need to accept modifications on the system , and you HAVE to install SuperSU otherwise the system will not boot
Russian language is like black magic xD
If someone tris it can you confirm this work ?
Thanks
Hi. I repeat again that it does not matter that the touch does not work ... the Recovery works with a mouse and an OTG adapter. Recovery is only for root or to install some zip. Anyway, this Recovery YES works with a mouse.
Seorconde said:
Hi. I repeat again that it does not matter that the touch does not work ... the Recovery works with a mouse and an OTG adapter. Recovery is only for root or to install some zip. Anyway, this Recovery YES works with a mouse.
Click to expand...
Click to collapse
So ... are you rooted right now ? because everyone here knows that the twrp works with a mouse but we want to know if the root works
Best regards from France
toxic94400 said:
So ... are you rooted right now ? because everyone here knows that the twrp works with a mouse but we want to know if the root works
Best regards from France
Click to expand...
Click to collapse
Of course, I'm root. Just install from the Recovery SuperSu ZIP
Seorconde said:
Of course, I'm root. Just install from the Recovery SuperSu ZIP
Click to expand...
Click to collapse
Oh nice bro , can you show it in action ?
What files did you take ? Any version of superSU ? Any Version of twrp ?
toxic94400 said:
Oh nice bro , can you show it in action ?
What files did you take ? Any version of superSU ? Any Version of twrp ?
Click to expand...
Click to collapse
https://www.androidweblog.com/root-ulefone-gemini-pro-install-twrp-recovery/
Do not ask for everything done .... investigate, investigate and further investigate ... but in that link is everything ....
Seorconde said:
https://www.androidweblog.com/root-ulefone-gemini-pro-install-twrp-recovery/
Do not ask for everything done .... investigate, investigate and further investigate ... but in that link is everything ....
Click to expand...
Click to collapse
Thank you but i never asked anythind already done , we are a community , so we need information for everyone
Can you upload a picture of your root ? thank you
everyone IT WORKS! i comfirm that flashing supersu using otgmouse work, i am now rooted and can recover my emei, thank you guys!!!
Thank you anuubid for confirming it , that's awesome the germini pro is officialy rooted !
Congratulations to everyone who participed in search's etc .
:good::good::good:
<Guys, cn anyon ehlp me recover my emei now? its not working at all...
Anubiiis said:
<Guys, cn anyon ehlp me recover my emei now? its not working at all...
Click to expand...
Click to collapse
hey annubiis i need help to root my phone can you help me right now ?