My Phone(Redmi Note 3,Kenzo) Cant Boot,It stuck on charge screen with zero battery and red light blink(i think the problem is the phone,cause when i open my phone and pull up the battery cable it doesnt go off,its still charging),when i press the power button again,its still the same ,back on the charge screen,i dont know how to fix it, pls if u know help me i would be thankful if some one see this thread and reply it . sorry about my bad grammar
KingAziz said:
My Phone(Redmi Note 3,Kenzo) Cant Boot,It stuck on charge screen with zero battery and red light blink(i think the problem is battery,cause when i open my phone and pull up the battery cable it doesnt go off,its still charging),when i press the power button again,its still the same ,back on the charge screen,i dont know how to fix it, pls if u know help me i would be thankful if some one see this thread and reply it . sorry about my bad grammar
Click to expand...
Click to collapse
What did u do ?
Did u try to install twrp ?
Did u try to install custom rom?
U can flash latest 10.2 fastboot miui rom clean all in EDL mode.
Black_Stark said:
What did u do ?
Did u try to install twrp ?
Did u try to install custom rom?
U can flash latest 10.2 fastboot miui rom clean all in EDL mode.
Click to expand...
Click to collapse
I Dont Do Anything,My Phone Was Fall and it suddenly off so i check it,and yeah its happen ,
i will try,but can i save my data ?
KingAziz said:
I Dont Do Anything,My Phone Was Fall and it suddenly off so i check it,and yeah its happen ,
i will try,but can i save my data ?
Click to expand...
Click to collapse
Um Sorry,One More thing,i have do this before i post this thread,but i choose the save user data and flash it,but it still the same ,do i need to clean all data?,i cant save my data because i cant do anything
Use "clean all " option while flashing fastboot rom in edl mode.
Black_Stark said:
Use "clean all " option while flashing fastboot rom in edl mode.
Click to expand...
Click to collapse
i alrdy doing this,but still the same and i have tried many thing on other source,maybe its ic problem?or something else?
KingAziz said:
i alrdy doing this,but still the same and i have tried many thing on other source,maybe its ic problem?or something else?
Click to expand...
Click to collapse
Are u sure ur phone is kenzo ?
Double check properly if its kate.
Kenzo is Rn3 pro. Kenzo is 15.0 cm
Kate is Rn3 special edition. Kate is 15.2 cm in size.
Make sure u downloaded correct image for ur phone. Check if its kate image or kenzo image.
How much time it takes to succesfully flash ? 200 secs ? Any error ?
Black_Stark said:
Are u sure ur phone is kenzo ?
Double check properly if its kate.
Kenzo is Rn3 pro. Kenzo is 15.0 cm
Kate is Rn3 special edition. Kate is 15.2 cm in size.
Make sure u downloaded correct image for ur phone. Check if its kate image or kenzo image.
How much time it takes to succesfully flash ? 200 secs ? Any error ?
Click to expand...
Click to collapse
ofc my phone is kenzo,its like 900 secs to get finish and nothing error.
just like what i said,maybe its ic error cause my phone was fall before or something else i dont know,pls help me out
KingAziz said:
ofc my phone is kenzo,its like 900 secs to get finish and nothing error.
just like what i said,maybe its ic error cause my phone was fall before or something else i dont know,pls help me out
Click to expand...
Click to collapse
Then go to service center.
KingAziz said:
My Phone(Redmi Note 3,Kenzo) Cant Boot,It stuck on charge screen with zero battery and red light blink(i think the problem is the phone,cause when i open my phone and pull up the battery cable it doesnt go off,its still charging),when i press the power button again,its still the same ,back on the charge screen,i dont know how to fix it, pls if u know help me i would be thankful if some one see this thread and reply it . sorry about my bad grammar
Click to expand...
Click to collapse
Hello, Don't worry, your phone is alright
Just keep your plugged in the charger for about 2 days
It will automatically turn on
Hope this works
Cause this happened with me a year ago
Related
Hi guys ! First of all , I'm sorry for being a noob ,as this is just my 2nd android phone ...
So,my problem is that after an upgrade(android 2.3.7 MIUI interface beta2) I get spammed with errors after I boot(all I can do is "Force Close" them) ...
-I can't enter Recovery Mode(freezes ,I had this problem on all my other android versions except CMs)
-When I try to upgrade my OS using download mode+RUT v1.1.4 I wait for it to finish but after it finishes and I take out the battery(to exit DL mode) and reboot,nothing is changed (same OS,same errors)
Things I Tried
-Hard Reset(done it 3-4 times,no luck)
-Take out the battery and restart the phone
-Restarting it several times(30 times or so)
-Removing SD card / SIM card
Phone : Orange Boston
Any help is highly appreciated! Thanks
this has happend to me before. all i had to do was flash a backup and it was working.as long as your phone can enter download mode theres a good chance you can restore it.but i cant help much since im using a galaxy s and i can just use odin to do this
superalphajellybean said:
this has happend to me before. all i had to do was flash a backup and it was working.as long as your phone can enter download mode theres a good chance you can restore it.but i cant help much since im using a galaxy s and i can just use odin to do this
Click to expand...
Click to collapse
yeah,but the bad thing is that it won't replace the current OS files with the ones i'm flashing i'm out of ideas for flashing a new os...
Danii. said:
yeah,but the bad thing is that it won't replace the current OS files with the ones i'm flashing i'm out of ideas for flashing a new os...
Click to expand...
Click to collapse
yeh this happens to some people and there only option is to send there phone back to the manufacturer for repairs.but anyway good luck in fixing it
superalphajellybean said:
yeh this happens to some people and there only option is to send there phone back to the manufacturer for repairs.but anyway good luck in fixing it
Click to expand...
Click to collapse
My warranty has expired I'll try to find someone who knows how to fix this thing ,in the meantime I'll search for other ways of flashing it :| ...thanks for your help
Danii. said:
My warranty has expired I'll try to find someone who knows how to fix this thing ,in the meantime I'll search for other ways of flashing it :| ...thanks for your help
Click to expand...
Click to collapse
even if you still had a warranty once you root your device it voids your warranty
Still haven't found a solution ... anyone knows any way I could fix it?
bump
** FIXED
I ,somehow ,managed to enter Recovery Mode --> I plugged my phone to USB ,reboot using Fastboot Mode(which freezed) and disconnected the USB .My phone shut down and then I tried booting in Recovery Mode ,and tadaaa ! Then I just flashed using update.zip and now I'm using a new ,working ROM
Hi.
I have a problem with my phone. When i put my phone in my bag , suddenly my phone bootloop it self. So , i wait until the battery runs out.
When i charge it , it keep bootloop it self even i press the red small button near sim card. So i won't charge it full and let the battery runs out.
I already flash with three different ROM , its S119 ROW , S123 ROW , S124 ROW. I also try Frimware -> Upgrade and Download.
When i flash it , it won't on restart it self after i finish flashing. So i press the red small button again after flashing , but its keep bootlooping.
And i also try charge it again after flashing , but it keep bootlooping when charging. I also can't enter meta-mode , recovery mode and else.
Maybe its hardware problem? i am using MIUI room before it bootloop. But everything runs fine
How to fix it ?
PS : Sorry for my bad english :3
TheSentinels said:
Hi.
I have a problem with my phone. When i put my phone in my bag , suddenly my phone bootloop it self. So , i wait until the battery runs out.
When i charge it , it keep bootloop it self even i press the red small button near sim card. So i won't charge it full and let the battery runs out.
I already flash with three different ROM , its S119 ROW , S123 ROW , S124 ROW. I also try Frimware -> Upgrade and Download.
When i flash it , it won't on restart it self after i finish flashing. So i press the red small button again after flashing , but its keep bootlooping.
And i also try charge it again after flashing , but it keep bootlooping when charging. I also can't enter meta-mode , recovery mode and else.
Maybe its hardware problem? i am using MIUI room before it bootloop. But everything runs fine
How to fix it ?
PS : Sorry for my bad english :3
Click to expand...
Click to collapse
Be wise and go with your phone in to a service store . From what you described to us this could be a hardware problem.
stympy said:
Be wise and go with your phone in to a service store . From what you described to us this could be a hardware problem.
Click to expand...
Click to collapse
Oh , crap. Okay, i will. Thank you btw
i have the same problem !! and i made a threat for that!
Tomorrow i am going to a service store....
Tell me, if your phone works again! thanks .
Hello guys,
Here is my problem : youtube.com/watch?v=lGRq5dkg4Ow
I tried several rom (aosp, official, hermes, french rom ...) it change nothing, I really believe that It don't come from a rom but from hardware or bios (?).
It's 65€ to send it back to China so I'll not do it (they are going to refund me 26€).
What should I do ? Someone had this problems ? Can I contact a phone repairer or can I fix it myself ?
Should I try to sell it ?
I need your help guys
Nobody with info or help/link/having the same issue ?
Attempt to calibrate the proximity sensor and light sensor ... maybe help...
Hello !
I tried to access the proximity sensor test from the "CIT(?)" by pressing multiple time on "Kernel version "(about phone->kernel) but nothing opened (it's telling me "Launching cit" but nothing happened) ... the menu opened on the phone of my brother tho.
( en.miui.com/thread-110628-1-1.html instruction from here)
Uhmi said:
Hello guys,
Here is my problem : youtube.com/watch?v=lGRq5dkg4Ow
I tried several rom (aosp, official, hermes, french rom ...) it change nothing, I really believe that It don't come from a rom but from hardware or bios (?).
It's 65€ to send it back to China so I'll not do it (they are going to refund me 26€).
What should I do ? Someone had this problems ? Can I contact a phone repairer or can I fix it myself ?
Should I try to sell it ?
I need your help guys
Click to expand...
Click to collapse
Why there's no lockscreen when you wake up? Does the screen light up when shows black(try to verify in dark room)?
When you reboot the device does the MI logo appear after the vibration or it delays like when waking up from standby?
i have this prob too, but only in miui 7 beta (5.9.xx)..
its gone when im using fasboot installation for installing miui 7 stable..
nasko_spasko said:
Why there's no lockscreen when you wake up?
Click to expand...
Click to collapse
I disabled the lockscreen because it was a nightmare to unlock it with the lockscreen on (going to sleep before i could use the phone...)
nasko_spasko said:
Does the screen light up when shows black(try to verify in dark room)?
Click to expand...
Click to collapse
The luminosity change if i'm in the dark or in the light, look like the sensor is working.
nasko_spasko said:
When you reboot the device does the MI logo appear after the vibration or it delays like when waking up from standby?
Click to expand...
Click to collapse
Yeah it appear as fast as any other redmi note 2 (i just tried now)
i have this prob too, but only in miui 7 beta (5.9.xx)..
its gone when im using fasboot installation for installing miui 7 stable..
Click to expand...
Click to collapse
Are you sure it was the same ? I tried already a stable version... hum
I tried with my girlfriend if she could call me and if I could answer it.
I tried with a bluetooth headphone (there is a button on it to answer call so I don't need to push the button on the screen).
As soon as I hear ring, I push the button, for me it stop ringing but my girlfriend have to wait for my screen to show up for the call to work properly. (If my screen si black, it's still ringing for her)
Uhmi said:
I disabled the lockscreen because it was a nightmare to unlock it with the lockscreen on (going to sleep before i could use the phone...)
The luminosity change if i'm in the dark or in the light, look like the sensor is working.
Yeah it appear as fast as any other redmi note 2 (i just tried now)
Are you sure it was the same ? I tried already a stable version... hum
I tried with my girlfriend if she could call me and if I could answer it.
I tried with a bluetooth headphone (there is a button on it to answer call so I don't need to push the button on the screen).
As soon as I hear ring, I push the button, for me it stop ringing but my girlfriend have to wait for my screen to show up for the call to work properly. (If my screen si black, it's still ringing for her)
Click to expand...
Click to collapse
Try flashing firmware with sp flashtool. This will update not only kernel and system, but preloader and bootloader too. Good luck!
CAUTION!! DO NOT USE FORMAT OPTION!! YOU WILL ERASE NVRAM AND YOUR IMEI WILL BE PERMANENTLY LOST!!
nasko_spasko said:
Try flashing firmware with sp flashtool. This will update not only kernel and system, but preloader and bootloader too. Good luck!
CAUTION!! DO NOT USE FORMAT OPTION!! YOU WILL ERASE NVRAM AND YOUR IMEI WILL BE PERMANENTLY LOST!!
Click to expand...
Click to collapse
I followed these instruction from the seller (more than 2 weeks ago) :
Hi friend,
Please would you have a try to flash firmware to check?
Xiaomi_Redmi_Note_2_MIUI_7_PC_Lang_1009.zip
699.0 MB
mega.nz/#!yM9CnDqK!ntcKry0LliM_vfNFZmy3rXt3spbkT1Ueg8_eAyagdS4
Steps:
1. download the phone driver from this link:
androidxda.com/download-xiaomi-usb-drivers
2.install the driver to your PC.
3.turn off your phone,press volume down and power button at the same time until you enter fastboot mode.
4.double click "Redmi_Note_2_Flash_click_me.cmd" to run the flashing tool.
5.connect your phone to PC,the flashing will be processing automatic.
6.after flashing success,reboot your phone.
=====================
Redmi Note 2 Flashing Guide Video.mp4 280.6 MB
mega.nz/#!aJ1BxT7Z!cSE7FDvFk0snSni0R-TR7oQfh06KRyC0nwPOFe9E-Zc
Jenny
Click to expand...
Click to collapse
Is is the same ?
Edit : When the phone is Off and I check the battery level (when it'is plugged on my computer) it's doing a similar problem, when I push the power button it show the % of battery but if I don't wait (like 15 seconds) between 2 "request" it's going to delay my "request".
Uhmi said:
I followed these instruction from the seller (more than 2 weeks ago) :
Is is the same ?
Edit : When the phone is Off and I check the battery level (when it'is plugged on my computer) it's doing a similar problem, when I push the power button it show the % of battery but if I don't wait (like 15 seconds) between 2 "request" it's going to delay my "request".
Click to expand...
Click to collapse
this is fastboot method, not SP Flash Tool Download method.
I'll try to explain fast.
Download latest version of SP flash tool > Google search It
Install mediatek VCOM drivers to your Windows PC, if on Linux there's no need of driver. See this tutorial. For the redmi note 2 on step 4 you have to do it without the battery. The whole flash procedure is performed with removed battery.
After a successful driver installation proceed with loading the firmware in SP Flash Tool. Download the latest global stable rom, fastboot format -arround 1GB. Extract the folder that contains The MT6795-Android-scatter file, boot.img, recovery.img, system.img, etc.
Disconnect your device and remove It's battery.
In SPFT Browse for mt6795androidscatter and all the partition should load automatically in the listbox bellow. On combo box download mode choose Firmware upgrade and hit the big Download button.
Now connect your device with battery removed. and all should go smooth.
I did It on Linux, because I don't really use Windows.
Feel free to ask further questions, will answer asap.
Choosing to do this is dangerous but this is the only method that flashes preloader and dsp and uboot parts. Take your own responsibility on this!
Bye!
nasko_spasko said:
The MT6795-Android-scatter file, boot.img, recovery.img, system.img, etc.
Click to expand...
Click to collapse
I can't find firmware with mt6795_Android_Scatter.txt and everything on it...I only find recovery with it :/ Do you have a link ?
Edit : Okay I just did it with the firmware from the seller, it didn't worked. It's still as before.
Uhmi said:
I can't find firmware with mt6795_Android_Scatter.txt and everything on it...I only find recovery with it :/ Do you have a link ?
Edit : Okay I just did it with the firmware from the seller, it didn't worked. It's still as before.
Click to expand...
Click to collapse
Well, in this case It's either from the LCD or the PCB of the device not sure how to verify right now.. Do You have another one, i mean device or at least spare LCD screen?
Best option here is to return for service.
I have Touchscreen issue on my hermes and I won't send it back because I don't want to wait another 2 months, I'll fix it on my own. The screen costs me ~28USD, so I'll go with It.
What I fear is that in Your case might be a faulty PCB. That means even if you replace the LCD the problem may remain.
Yeah I don't know...
Juste noticed the flash/light don't work either...
mmmh.
Here. Link for 7.0.8.0 global ROM for SPFT, just in case.
Hi,
I tried to download this ROM, if I need someday.
But it asking for the key to encrypt.
Can you give me the key?
Thanks
darko150 said:
Hi,
I tried to download this ROM, if I need someday.
But it asking for the key to encrypt.
Can you give me the key?
Thanks
Click to expand...
Click to collapse
Sorry! Link updated.
Hello members,
i'm stuck in difficult situation.. i tried to flash VIVO Y83 (MT6765) (android 8.1) with STOCK ROM using (miracle thunder & SP Flash tool). I succeeded flashing stock rom (downgrading). i was happy but when i switched on my phone, display was black (it has white screen or shaky and distorted color display where i can see welcome screen, it was untill i flashed it with stock firmware, but as soon as i flash it with updated version of stock rom, the screen goes totally black)..
i also searched internet.. i learn about no rollback feature(no downgrade possible, might be the reason idk) , lockedbootloader (but, i unlocked the bootloader using miracle thunder, when i flashed it for the first time with stock rom) .. etc....
After turning the device ON, it was stuck on welcome screen with shaky display (or black screen with different version of stock rom) and it doesn't turn OFF even after pressing the power button for sometime or boot in fastboot mode, i can click screenshot( i hear the sound of camera clicking) or adjust volume by using volume buttons and power button... i switch off my device manually by removing battery..
One more thing.. i can flash the phone with spflash tool but with miracle thunder it shows "error0_0" while flashing.. I also came to know that when i tried to write perloader from stock rom using miracle thunder it says "BADFILE.. does not write to phone" so, i tried to read the preloader file from the device and save it.. and use it to write and i got no error.. but phone was still stuck on BLACK SCREEN..
CAN ANYONE HELP ME FIX IT... or Any Suggestions ? ...
[i can also provide logs of miracle thunder(let me know that)..]
i also want to know that Is the problem cuz of the da file because i used a da and auth file from a thread post saying, "special da and auth for MTK devices like y83, y81, e.t.c..
i can only flash with these special da and auth file, cuz the da file from sp flash tool(tried different versions) or miracle thunder or from stock rom doesn't work ( i got brom errors)..
P.S.- I have no old or previous backup & it's a secure boot mediatek device...
Sorry about the stupid poll, i'm a noobie.. i'm still learning about the forum.
Y83Bricked said:
Hello members,
i'm stuck in difficult situation........P.S.- I have no old or previous backup & it's a secure boot mediatek device...
Click to expand...
Click to collapse
sad that no one replied. is that device in warranty? at this point it would be best to replace it from the company itself if that's in warranty.
Sudeep Duhoon said:
sad that no one replied. is that device in warranty? at this point it would be best to replace it from the company itself if that's in warranty.
Click to expand...
Click to collapse
Thanks for replying
Actually, i fixed it and its working fine now..
though i'm still finding a way to root it
Y83Bricked said:
Thanks for replying
Actually, i fixed it and its working fine now..
though i'm still finding a way to root it
Click to expand...
Click to collapse
Can you make a guide to unlock bootloader
Hello
My 5 month old REDMI NOTE 10 global is stuck on MIUI logo since last 3 days. Force reboot doesn't help. Recovery mode options (reboot, safe mode) don't work. Mi PC suite doesn't detect phone despite installing drivers. In Fastboot mode, only a picture is shown. I don't want to lose my data so i haven't yet tried wipe data option.. Please help
geologistalfred said:
Hello
My 5 month old REDMI NOTE 10 global is stuck on MIUI logo since last 3 days. Force reboot doesn't help. Recovery mode options (reboot, safe mode) don't work. Mi PC suite doesn't detect phone despite installing drivers. In Fastboot mode, only a picture is shown. I don't want to lose my data so i haven't yet tried wipe data option.. Please help
Click to expand...
Click to collapse
What happen? What did you do to make stuck at miui logo?
akoaypinoy said:
What happen? What did you do to make stuck at miui logo?
Click to expand...
Click to collapse
If your bootloader unlock then its good too
I have no idea what happened. The last thing I remember was changing theme of my phone. Then it asked me to restart to apply new font. When i did, it got stuck on logo.
geologistalfred said:
I have no idea what happened. The last thing I remember was changing theme of my phone. Then it asked me to restart to apply new font. When i did, it got stuck on logo.
Click to expand...
Click to collapse
Does your phone unlock bootloader? Andbdo you have rooted?
akoaypinoy said:
If your bootloader unlock then its good too
Click to expand...
Click to collapse
How can i find out? The phone doesn't turn on, PC doesn't detect it, ADB doesn't find my device.
akoaypinoy said:
Does your phone unlock bootloader? Andbdo you have rooted?
Click to expand...
Click to collapse
No its in warranty. I don't know about the bootloader
If your phone is under warranty then go to nearest service center. Maybe your phone going for EDL mode to install again rom for your phone
geologistalfred said:
No its in warranty. I don't know about the bootloade
Click to expand...
Click to collapse
geologistalfred said:
I have no idea what happened. The last thing I remember was changing theme of my phone. Then it asked me to restart to apply new font. When i did, it got stuck on logo.
Click to expand...
Click to collapse
Even though your theme download is not compatible on ypur phone i dont think so it can brick your phone. .
same sudden death error on redmi 9t and poco m3 models?
akoaypinoy said:
If your phone is under warranty then go to nearest service center. Maybe your phone going for EDL mode to install again rom for your phone
Click to expand...
Click to collapse
But this will erase all data right? Thats why i am hesitant to use this option
geologistalfred said:
But this will erase all data right? Thats why i am hesitant to use this option
Click to expand...
Click to collapse
You have no choice
In reality its better to be unlock bootloader than lock because whatever happens in ypur phone you can easily flash by mi flash tool. So you dont have to worry when youre phone goes something wrong. It cant detect youre phone when it fastboot because ypur phone not actually unlock the bootloader.
akoaypinoy said:
In reality its better to be unlock bootloader than lock because whatever happens in ypur phone you can easily flash by mi flash tool. So you dont have to worry when youre phone goes something wrong. It cant detect youre phone when it fastboot because ypur phone not actually unlock the bootloader.
Click to expand...
Click to collapse
Can i unlock the bootloader now?
The path to data preservation could take two approaches. The first is an authorized service that would guarantee to restore the system with data preservation. An untested second path would be to achieve booting the phone in EDL mode and using MiFlash with the "save user data" option to load the corresponding latest Miui.
Unlocking the bootloader erases the data.
StaryMuz said:
Unlocking the bootloader erases the data.
Click to expand...
Click to collapse
The problem is does heS not unlock the bootloader before hes phone bricked.
akoaypinoy said:
What happen? What did you do to make stuck at miui logo?
Click to expand...
Click to collapse
Reboot and watch for 15 and still it doesn't works then try to flash Orange fox recovery
I think there is problem with lcd
I will change it and tell
In redmi 9 pro with disconnected camera phone boot successfully
I think in redmi note 10 it will fix with another lcd
I will get full test tomorrow
in samsung A515f we have random reboot because of LCD
Xiaomi has lots of problems
Mi11 lite fingerprint sensor flat wire breaks
Poco m3 short circuit (edl mode) and...
sarabbafrani said:
I think there is problem with lcd
I will change it and tell
In redmi 9 pro with disconnected camera phone boot successfully
I think in redmi note 10 it will fix with another lcd
I will get full test tomorrow
in samsung A515f we have random reboot because of LCD
Xiaomi has lots of problems
Mi11 lite fingerprint sensor flat wire breaks
Poco m3 short circuit (edl mode) and...
Click to expand...
Click to collapse
What are you talking about, there's a difference between software and hardware. This topic is software related. LMAO