Hello
My 5 month old REDMI NOTE 10 global is stuck on MIUI logo since last 3 days. Force reboot doesn't help. Recovery mode options (reboot, safe mode) don't work. Mi PC suite doesn't detect phone despite installing drivers. In Fastboot mode, only a picture is shown. I don't want to lose my data so i haven't yet tried wipe data option.. Please help
geologistalfred said:
Hello
My 5 month old REDMI NOTE 10 global is stuck on MIUI logo since last 3 days. Force reboot doesn't help. Recovery mode options (reboot, safe mode) don't work. Mi PC suite doesn't detect phone despite installing drivers. In Fastboot mode, only a picture is shown. I don't want to lose my data so i haven't yet tried wipe data option.. Please help
Click to expand...
Click to collapse
What happen? What did you do to make stuck at miui logo?
akoaypinoy said:
What happen? What did you do to make stuck at miui logo?
Click to expand...
Click to collapse
If your bootloader unlock then its good too
I have no idea what happened. The last thing I remember was changing theme of my phone. Then it asked me to restart to apply new font. When i did, it got stuck on logo.
geologistalfred said:
I have no idea what happened. The last thing I remember was changing theme of my phone. Then it asked me to restart to apply new font. When i did, it got stuck on logo.
Click to expand...
Click to collapse
Does your phone unlock bootloader? Andbdo you have rooted?
akoaypinoy said:
If your bootloader unlock then its good too
Click to expand...
Click to collapse
How can i find out? The phone doesn't turn on, PC doesn't detect it, ADB doesn't find my device.
akoaypinoy said:
Does your phone unlock bootloader? Andbdo you have rooted?
Click to expand...
Click to collapse
No its in warranty. I don't know about the bootloader
If your phone is under warranty then go to nearest service center. Maybe your phone going for EDL mode to install again rom for your phone
geologistalfred said:
No its in warranty. I don't know about the bootloade
Click to expand...
Click to collapse
geologistalfred said:
I have no idea what happened. The last thing I remember was changing theme of my phone. Then it asked me to restart to apply new font. When i did, it got stuck on logo.
Click to expand...
Click to collapse
Even though your theme download is not compatible on ypur phone i dont think so it can brick your phone. .
same sudden death error on redmi 9t and poco m3 models?
akoaypinoy said:
If your phone is under warranty then go to nearest service center. Maybe your phone going for EDL mode to install again rom for your phone
Click to expand...
Click to collapse
But this will erase all data right? Thats why i am hesitant to use this option
geologistalfred said:
But this will erase all data right? Thats why i am hesitant to use this option
Click to expand...
Click to collapse
You have no choice
In reality its better to be unlock bootloader than lock because whatever happens in ypur phone you can easily flash by mi flash tool. So you dont have to worry when youre phone goes something wrong. It cant detect youre phone when it fastboot because ypur phone not actually unlock the bootloader.
akoaypinoy said:
In reality its better to be unlock bootloader than lock because whatever happens in ypur phone you can easily flash by mi flash tool. So you dont have to worry when youre phone goes something wrong. It cant detect youre phone when it fastboot because ypur phone not actually unlock the bootloader.
Click to expand...
Click to collapse
Can i unlock the bootloader now?
The path to data preservation could take two approaches. The first is an authorized service that would guarantee to restore the system with data preservation. An untested second path would be to achieve booting the phone in EDL mode and using MiFlash with the "save user data" option to load the corresponding latest Miui.
Unlocking the bootloader erases the data.
StaryMuz said:
Unlocking the bootloader erases the data.
Click to expand...
Click to collapse
The problem is does heS not unlock the bootloader before hes phone bricked.
akoaypinoy said:
What happen? What did you do to make stuck at miui logo?
Click to expand...
Click to collapse
Reboot and watch for 15 and still it doesn't works then try to flash Orange fox recovery
I think there is problem with lcd
I will change it and tell
In redmi 9 pro with disconnected camera phone boot successfully
I think in redmi note 10 it will fix with another lcd
I will get full test tomorrow
in samsung A515f we have random reboot because of LCD
Xiaomi has lots of problems
Mi11 lite fingerprint sensor flat wire breaks
Poco m3 short circuit (edl mode) and...
sarabbafrani said:
I think there is problem with lcd
I will change it and tell
In redmi 9 pro with disconnected camera phone boot successfully
I think in redmi note 10 it will fix with another lcd
I will get full test tomorrow
in samsung A515f we have random reboot because of LCD
Xiaomi has lots of problems
Mi11 lite fingerprint sensor flat wire breaks
Poco m3 short circuit (edl mode) and...
Click to expand...
Click to collapse
What are you talking about, there's a difference between software and hardware. This topic is software related. LMAO
Related
Hello guys,
Here is my problem : youtube.com/watch?v=lGRq5dkg4Ow
I tried several rom (aosp, official, hermes, french rom ...) it change nothing, I really believe that It don't come from a rom but from hardware or bios (?).
It's 65€ to send it back to China so I'll not do it (they are going to refund me 26€).
What should I do ? Someone had this problems ? Can I contact a phone repairer or can I fix it myself ?
Should I try to sell it ?
I need your help guys
Nobody with info or help/link/having the same issue ?
Attempt to calibrate the proximity sensor and light sensor ... maybe help...
Hello !
I tried to access the proximity sensor test from the "CIT(?)" by pressing multiple time on "Kernel version "(about phone->kernel) but nothing opened (it's telling me "Launching cit" but nothing happened) ... the menu opened on the phone of my brother tho.
( en.miui.com/thread-110628-1-1.html instruction from here)
Uhmi said:
Hello guys,
Here is my problem : youtube.com/watch?v=lGRq5dkg4Ow
I tried several rom (aosp, official, hermes, french rom ...) it change nothing, I really believe that It don't come from a rom but from hardware or bios (?).
It's 65€ to send it back to China so I'll not do it (they are going to refund me 26€).
What should I do ? Someone had this problems ? Can I contact a phone repairer or can I fix it myself ?
Should I try to sell it ?
I need your help guys
Click to expand...
Click to collapse
Why there's no lockscreen when you wake up? Does the screen light up when shows black(try to verify in dark room)?
When you reboot the device does the MI logo appear after the vibration or it delays like when waking up from standby?
i have this prob too, but only in miui 7 beta (5.9.xx)..
its gone when im using fasboot installation for installing miui 7 stable..
nasko_spasko said:
Why there's no lockscreen when you wake up?
Click to expand...
Click to collapse
I disabled the lockscreen because it was a nightmare to unlock it with the lockscreen on (going to sleep before i could use the phone...)
nasko_spasko said:
Does the screen light up when shows black(try to verify in dark room)?
Click to expand...
Click to collapse
The luminosity change if i'm in the dark or in the light, look like the sensor is working.
nasko_spasko said:
When you reboot the device does the MI logo appear after the vibration or it delays like when waking up from standby?
Click to expand...
Click to collapse
Yeah it appear as fast as any other redmi note 2 (i just tried now)
i have this prob too, but only in miui 7 beta (5.9.xx)..
its gone when im using fasboot installation for installing miui 7 stable..
Click to expand...
Click to collapse
Are you sure it was the same ? I tried already a stable version... hum
I tried with my girlfriend if she could call me and if I could answer it.
I tried with a bluetooth headphone (there is a button on it to answer call so I don't need to push the button on the screen).
As soon as I hear ring, I push the button, for me it stop ringing but my girlfriend have to wait for my screen to show up for the call to work properly. (If my screen si black, it's still ringing for her)
Uhmi said:
I disabled the lockscreen because it was a nightmare to unlock it with the lockscreen on (going to sleep before i could use the phone...)
The luminosity change if i'm in the dark or in the light, look like the sensor is working.
Yeah it appear as fast as any other redmi note 2 (i just tried now)
Are you sure it was the same ? I tried already a stable version... hum
I tried with my girlfriend if she could call me and if I could answer it.
I tried with a bluetooth headphone (there is a button on it to answer call so I don't need to push the button on the screen).
As soon as I hear ring, I push the button, for me it stop ringing but my girlfriend have to wait for my screen to show up for the call to work properly. (If my screen si black, it's still ringing for her)
Click to expand...
Click to collapse
Try flashing firmware with sp flashtool. This will update not only kernel and system, but preloader and bootloader too. Good luck!
CAUTION!! DO NOT USE FORMAT OPTION!! YOU WILL ERASE NVRAM AND YOUR IMEI WILL BE PERMANENTLY LOST!!
nasko_spasko said:
Try flashing firmware with sp flashtool. This will update not only kernel and system, but preloader and bootloader too. Good luck!
CAUTION!! DO NOT USE FORMAT OPTION!! YOU WILL ERASE NVRAM AND YOUR IMEI WILL BE PERMANENTLY LOST!!
Click to expand...
Click to collapse
I followed these instruction from the seller (more than 2 weeks ago) :
Hi friend,
Please would you have a try to flash firmware to check?
Xiaomi_Redmi_Note_2_MIUI_7_PC_Lang_1009.zip
699.0 MB
mega.nz/#!yM9CnDqK!ntcKry0LliM_vfNFZmy3rXt3spbkT1Ueg8_eAyagdS4
Steps:
1. download the phone driver from this link:
androidxda.com/download-xiaomi-usb-drivers
2.install the driver to your PC.
3.turn off your phone,press volume down and power button at the same time until you enter fastboot mode.
4.double click "Redmi_Note_2_Flash_click_me.cmd" to run the flashing tool.
5.connect your phone to PC,the flashing will be processing automatic.
6.after flashing success,reboot your phone.
=====================
Redmi Note 2 Flashing Guide Video.mp4 280.6 MB
mega.nz/#!aJ1BxT7Z!cSE7FDvFk0snSni0R-TR7oQfh06KRyC0nwPOFe9E-Zc
Jenny
Click to expand...
Click to collapse
Is is the same ?
Edit : When the phone is Off and I check the battery level (when it'is plugged on my computer) it's doing a similar problem, when I push the power button it show the % of battery but if I don't wait (like 15 seconds) between 2 "request" it's going to delay my "request".
Uhmi said:
I followed these instruction from the seller (more than 2 weeks ago) :
Is is the same ?
Edit : When the phone is Off and I check the battery level (when it'is plugged on my computer) it's doing a similar problem, when I push the power button it show the % of battery but if I don't wait (like 15 seconds) between 2 "request" it's going to delay my "request".
Click to expand...
Click to collapse
this is fastboot method, not SP Flash Tool Download method.
I'll try to explain fast.
Download latest version of SP flash tool > Google search It
Install mediatek VCOM drivers to your Windows PC, if on Linux there's no need of driver. See this tutorial. For the redmi note 2 on step 4 you have to do it without the battery. The whole flash procedure is performed with removed battery.
After a successful driver installation proceed with loading the firmware in SP Flash Tool. Download the latest global stable rom, fastboot format -arround 1GB. Extract the folder that contains The MT6795-Android-scatter file, boot.img, recovery.img, system.img, etc.
Disconnect your device and remove It's battery.
In SPFT Browse for mt6795androidscatter and all the partition should load automatically in the listbox bellow. On combo box download mode choose Firmware upgrade and hit the big Download button.
Now connect your device with battery removed. and all should go smooth.
I did It on Linux, because I don't really use Windows.
Feel free to ask further questions, will answer asap.
Choosing to do this is dangerous but this is the only method that flashes preloader and dsp and uboot parts. Take your own responsibility on this!
Bye!
nasko_spasko said:
The MT6795-Android-scatter file, boot.img, recovery.img, system.img, etc.
Click to expand...
Click to collapse
I can't find firmware with mt6795_Android_Scatter.txt and everything on it...I only find recovery with it :/ Do you have a link ?
Edit : Okay I just did it with the firmware from the seller, it didn't worked. It's still as before.
Uhmi said:
I can't find firmware with mt6795_Android_Scatter.txt and everything on it...I only find recovery with it :/ Do you have a link ?
Edit : Okay I just did it with the firmware from the seller, it didn't worked. It's still as before.
Click to expand...
Click to collapse
Well, in this case It's either from the LCD or the PCB of the device not sure how to verify right now.. Do You have another one, i mean device or at least spare LCD screen?
Best option here is to return for service.
I have Touchscreen issue on my hermes and I won't send it back because I don't want to wait another 2 months, I'll fix it on my own. The screen costs me ~28USD, so I'll go with It.
What I fear is that in Your case might be a faulty PCB. That means even if you replace the LCD the problem may remain.
Yeah I don't know...
Juste noticed the flash/light don't work either...
mmmh.
Here. Link for 7.0.8.0 global ROM for SPFT, just in case.
Hi,
I tried to download this ROM, if I need someday.
But it asking for the key to encrypt.
Can you give me the key?
Thanks
darko150 said:
Hi,
I tried to download this ROM, if I need someday.
But it asking for the key to encrypt.
Can you give me the key?
Thanks
Click to expand...
Click to collapse
Sorry! Link updated.
Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Use test point mathod it will be back in life easily. Tested myself
ebrehemx said:
Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Click to expand...
Click to collapse
can you boot to fastboot if yes then flash via fast boot or search for FASTBOOT TO EDL MODE IN guide news section and flash via EDL that might help
Something like this happened with me...thankfully my device was under warranty and my motherboard was changed in 2 hrs..now I unlocked officially after taking permission and using custom rom now
Buy a deepflash cable for 5$ in Aliexpress.
Deep flash https://www.youtube.com/watch?v=uXai6PMmM7s
How to make deep flash cable https://www.youtube.com/watch?v=hmdrj4uX7gY
ebrehemx said:
Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Click to expand...
Click to collapse
If you're unable to boot to fastboot and edl or the pc shows 9008E, get the deep flash cable from Alixpress. It's cheap and easiest way to recover your phone. This cable works fine.
https://www.aliexpress.com/item/New...rts-all-BL-locks-Engineering/32785943419.html
Or you can make the cable yourself with some Youtube tutorials posted above.
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
ebrehemx said:
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
Click to expand...
Click to collapse
Wait a bit more and if nothing happens try rebooting to fastboot.
If fastboot is accessible try flashing the latest dev rom.
ebrehemx said:
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
Click to expand...
Click to collapse
Did you flash all partition including storage? If I remember correctly, this shouldn't take more than 10-15 mins to boot up or even less. If it's still stuck, you should select 'flash all including storage' in Mi flash.
Or
Since your phone can boot into fastboot now, I would suggest to unlock it unofficially and flash zcx twrp recovery and than flash the rom through recovery after formatting all data.
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
ebrehemx said:
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
Click to expand...
Click to collapse
Just get a permission from xiaome and unlock your device and then flash custom recovery change the rom(sorry for bad english)
ebrehemx said:
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
Click to expand...
Click to collapse
You lost your IMEI and Modem. Try this -> https://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789
My phone box has only one IMEI code. I was able to restore that imei to the sim 2 slot. sim 1 slot has some unknown imei1.
However, after much effort flashing many roms trying many methods for efs/imei restore, i was not able to get the sim cards working. none of the sim slots work.
Does the "Radio: OFF" status mean it's being kept forcibly off by the system. i looked for an option to turn it on with no success...
aizen_souske said:
Something like this happened with me...thankfully my device was under warranty and my motherboard was changed in 2 hrs..now I unlocked officially after taking permission and using custom rom now
Click to expand...
Click to collapse
Same thing is happened with me.
No recovery,No fastboot.
Took my phone to service center & they changed motherboard.
Now bootloader is locked & IMEI changed.
Tried to unlock using old account but now it shows error at 50%
How to unlock it again?
Yogendra Kher said:
Same thing is happened with me.
No recovery,No fastboot.
Took my phone to service center & they changed motherboard.
Now bootloader is locked & IMEI changed.
Tried to unlock using old account but now it shows error at 50%
How to unlock it again?
Click to expand...
Click to collapse
50% error is prety common..bothibg to do with your device..thabkfully i never had such issues..but u can find plenty of youtube videos adressing this issue
---------- Post added at 11:50 AM ---------- Previous post was at 11:48 AM ----------
ebrehemx said:
My phone box has only one IMEI code. I was able to restore that imei to the sim 2 slot. sim 1 slot has some unknown imei1.
However, after much effort flashing many roms trying many methods for efs/imei restore, i was not able to get the sim cards working. none of the sim slots work.
Click to expand...
Click to collapse
U did somethibg wrong..u have to use imei fixer and input your own imei given at the back of box..dont.input some random imei..imei spoofing is illegal
I have also lost IMEI, sent to service and motherboard was changed with IMEI. The problem is the new motherboard, which keeps rebooting, suddenly and randomly. When starts to reboot, it never stops and keeps rebooting on Mi logo - never get to loading MIUI. Even if I flash the MIUI (global) again through EDL, same thing happens. After some time, it will revive again by itself and starts booting. My fault is I didn't backup nvram with the build came from service, but with global stable after I have updated.
It sounds as a hardware issue, or it could be resolved by some software flashing/modification?
@Yogendra Kher Do you have any issues with new motherboard?
apriores said:
I have also lost IMEI, sent to service and motherboard was changed with IMEI. The problem is the new motherboard, which keeps rebooting, suddenly and randomly. When starts to reboot, it never stops and keeps rebooting on Mi logo - never get to loading MIUI. Even if I flash the MIUI (global) again through EDL, same thing happens. After some time, it will revive again by itself and starts booting. My fault is I didn't backup nvram with the build came from service, but with global stable after I have updated.
It sounds as a hardware issue, or it could be resolved by some software flashing/modification?
@Yogendra Kher Do you have any issues with new motherboard?
Click to expand...
Click to collapse
No
Guys, I recently bought a redmi 5 plus that installed with miui 9.2.0.2.
It can randomly bricked after a few days use.
When it bricked, I cannot boot into recovery mode nor power up the device, the led light keep blinking when charging and nothing will ever show up on the screen no matter what I press.
All I do is take it to service centre and they will open up the device back cover and boot it, but they will never tell me what they did.
Now the third time I go to service centre, they accused me for unauthorised opening the back cover due to scratch at the side of the screen, so the warranty is void.
Please help me get out of this nightmare, I want to know if I flash global dev rom to it, the problem will be solved?
If yes, how do I do it? Is it possible to flash with the updater? Or only testpoint method? (Note: this device is installed fake vendor rom)
Teddy Thomas said:
Guys, I recently bought a redmi 5 plus that installed with miui 9.2.0.2.
It can randomly bricked after a few days use.
When it bricked, I cannot boot into recovery mode nor power up the device, the led light keep blinking when charging and nothing will ever show up on the screen no matter what I press.
All I do is take it to service centre and they will open up the device back cover and boot it, but they will never tell me what they did.
Now the third time I go to service centre, they accused me for unauthorised opening the back cover due to scratch at the side of the screen, so the warranty is void.
Please help me get out of this nightmare, I want to know if I flash global dev rom to it, the problem will be solved?
If yes, how do I do it? Is it possible to flash with the updater? Or only testpoint method? (Note: this device is installed fake vendor rom)
Click to expand...
Click to collapse
if your device is completely bricked then you have to do test point method. It is not very hard, and it will make your phone work again, flash chinese beta rom and unlock bootloader if you want then.
n0_xQuZe said:
if your device is completely bricked then you have to do test point method. It is not very hard, and it will make your phone work again, flash chinese beta rom and unlock bootloader if you want then.
Click to expand...
Click to collapse
Can I flash global development rom directly from a fake rom? From what I read in other thread, Chinese development rom will come out with error 86006
Personally i have a MEE7 version phone, you can check yours in the phone box. I had a fake rom and couldnt update or flash anything. So i did test point, flashed chinese developer rom and succesfully bind my account without any error whatsoever and no need for any vpn at all. So now i am only waiting for 15 days to go by and i can unlock.
n0_xQuZe said:
Personally i have a MEE7 version phone, you can check yours in the phone box. I had a fake rom and couldnt update or flash anything. So i did test point, flashed chinese developer rom and succesfully bind my account without any error whatsoever and no need for any vpn at all. So now i am only waiting for 15 days to go by and i can unlock.
Click to expand...
Click to collapse
I have the MET7 and did the test point method all flashed ok i too am now waiting the 15 days to unlock. also account binding worked first time.
No you cannot flash global rom over fake rom - it will brick the phone - tried and tested.
test point method to chinese developer rom, unlock bootloader and then flash global rom.
When i press volume up and power key instead of going into recovery Mi A3 got formatted is it a bug or what ?
The same thing happened to me.
And also same thing happened with me
varun666 said:
When i press volume up and power key instead of going into recovery Mi A3 got formatted is it a bug or what ?
Click to expand...
Click to collapse
I think that the correct is the volume down…
Power + volume up should boot into system recovery ("no command" displayed). I haven't tried it and now I'm afraid to as the phone is already set up ? If it wipes without confirmation, it's definitely a bug.
It's also happened with me
Sapper Morton said:
Usually it wipes when you try to change slot to an old firmware version, it can be avoided, as explained by Typhus in other threads; however I never seen a factory reset obligation while completely stock, we need more info to be sure. As of now, I can access stock recovery as usual.
Click to expand...
Click to collapse
Phone should ask you if you want to wipe data after 3(5?) unsuccessful boot attempts (corrupted data or trying to boot old incompatible rom in second slot). At least this was the case on Mi A1. I'll try the behavior when I get another A3 phone.
Sapper Morton said:
I'm not sure how to intentionally corrupt data partition, while bootloader is locked; any tips for testing purposes?
Click to expand...
Click to collapse
It happened to me on A1 when I booted Oreo system after update to Pie. I forgot to turn off Oreo Substratum overlays before updating the phone. After the update, I was getting constant SystemUI crash, so thought that I'll fix it by booting Oreo slot and uninstall the overlays. Well, it didn't go well.. after a few failed boot attempts (Oreo and then also Pie) system asked me if I want to perform full data wipe to recover the phone, which I did [emoji846]
So maybe similar approach by booting previous Android version might be tried once this phone gets Android 10 update..?
Yeah! Bro ,
(Same pinch) - same thing happened with me also when I tried to boot my phone into recovery mode
It directly formatted unknowingly and
no options were displayed onto the screen
It directly got formatted without giving any warnings
A animated circel logo & A message apeared on my screen
:- Erasing...
And that's it , I got very much scared
But what is the use of being afraid now, what was to happen has happened
#xiaomi #updates #bugs #developers #errors #mi a3 bugs .
Aryaman pal said:
Yeah! Bro ,
(Same pinch) - same thing happened with me also when I tried to boot my phone into recovery mode
It directly formatted unknowingly and
no options were displayed onto the screen
It directly got formatted without giving any warnings
A animated circel logo & A message apeared on my screen
:- Erasing...
And that's it , I got very much scared
But what is the use of being afraid now, what was to happen has happened
#xiaomi #updates #bugs #developers #errors #mi a3 bugs .
Click to expand...
Click to collapse
Reinstall firmware stock via edl
wetito said:
Reinstall firmware stock via edl
Click to expand...
Click to collapse
But I have not unlocked my Phone's bootloader & I have not installed any third party Rom to my smartphone,
It is a normal handset without any interference of mine,
Overall I have not performed any type of "advance action" in my Mi A3.
Aryaman pal said:
But I have not unlocked my Phone's bootloader & I have not installed any third party Rom to my smartphone,
It is a normal handset without any interference of mine,
Overall I have not performed any type of "advance action" in my Mi
Click to expand...
Click to collapse
Aryaman pal said:
But I have not unlocked my Phone's bootloader & I have not installed any third party Rom to my smartphone,
It is a normal handset without any interference of mine,
Overall I have not performed any type of "advance action" in my Mi A3.
Click to expand...
Click to collapse
Edl mode work also for locked stock phones
Hello ,
My friend has issue with his huawei p20 lite (ANE LX1).
He poked needle in earphones connector and his screen went black.
When the phone is booted to the android os, I can see for a split second (less than 5ms) screen on what is it, which is impossible to naviage since i have to press power button multiple times to show once.
But the Fastboot&Rescue mode as well as download mode works fine.
Soo How can i flash rom+firmware on it, since mostly what I find on google is "Exit from Rescure&Fasboot mode
WoW2ndJob said:
Hello ,
My friend has issue with his huawei p20 lite (ANE LX1).
He poked needle in earphones connector and his screen went black.
When the phone is booted to the android os, I can see for a split second (less than 5ms) screen on what is it, which is impossible to naviage since i have to press power button multiple times to show once.
But the Fastboot&Rescue mode as well as download mode works fine.
Soo How can i flash rom+firmware on it, since mostly what I find on google is "Exit from Rescure&Fasboot mode
Click to expand...
Click to collapse
Hi,
IMO the best solution is searching for the Service rom on https://androidhost.ru/ (type ANE- or ANNE- , the correct FW depends on the current version of Android and your region - Cxxx), and doing the dload method from SD card. Process will erase all the data from your device !
Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" . With Service ROM you will get full stock with locked bootloader.
Funky enough will download tomorrow, since my network speed is crap.
Another thing while holding vol+ with vol- and power button it gives me in ADB recovery, since i cannot see the screen i dont know what it shows.
Also to mention I've pulled from fastboot all info
product model ANE-LX1
build ANE-LX1 9.1.0.306
hw/eu
And the Cxxx is matching except the last 2 T8 for example.
I think I've found culprit. Seems like the backlight is dead for some apparent reason or totally turned down, not even In dark i can see the screen, except on the lock screen where i see the warning the phone has been recently turned off then on input password.
But why is then working absolutley fine in fastboot&rescue mode?
If you do not belive me ill upload pictures.
https://ibb.co/MML06Vb - normal
https://ibb.co/ZL3wtJn -rescue mode.
WoW2ndJob said:
https://ibb.co/MML06Vb - normal
https://ibb.co/ZL3wtJn -rescue mode.
Click to expand...
Click to collapse
I believe you , but if it's HW problem (damaged motherboard, short circuit etc.), I can't help you anymore. Have you tried dload method with Service ROM?
I have my Huawei p20 lite ANE-LX2 stuck on logo, bootloader is lock at the same time. Can i perform DLOAD method through system Recovery? to flash stock firmware? thanks
AmorPower said:
I have my Huawei p20 lite ANE-LX2 stuck on logo, bootloader is lock at the same time. Can i perform DLOAD method through system Recovery? to flash stock firmware? thanks
Click to expand...
Click to collapse
Yes, You can (process will erase all Your data) . Use Service ROM only!
bozka1 said:
Yes, You can (process will erase all Your data) . Use Service ROM only!
Click to expand...
Click to collapse
Thank you! gotta do this later and give an update. God bless
AmorPower said:
Thank you! gotta do this later and give an update. God bless
Click to expand...
Click to collapse
my phone can't enter recovery mode, it only booting constantly