Hello friends.
my phone stopped booting recently. I can't enter recovery, but i can enter download mode. I tried flashing the latest firmware (G965FXXS7CSK4) for my Region which was flashed successfully with no errors in Odin, but still can't boot, just stuck in Samsung Galaxy s9+ Logo.
Any help would be much apreciated.
vipercubic said:
Hello friends.
my phone stopped booting recently. I can't enter recovery, but i can enter download mode. I tried flashing the latest firmware (G965FXXS7CSK4) for my Region which was flashed successfully with no errors in Odin, but still can't boot, just stuck in Samsung Galaxy s9+ Logo.
Any help would be much appreciated.
Click to expand...
Click to collapse
did you flash the CSC or HOME_CSC?
Youdoofus said:
did you flash the CSC or HOME_CSC?
Click to expand...
Click to collapse
I flashed the Home_csc !
vipercubic said:
I flashed the Home_csc !
Click to expand...
Click to collapse
flash the CSC
Youdoofus said:
flash the CSC
Click to expand...
Click to collapse
Thank you for the suggestion. Now i'm getting "Repartition operation failed (I haven't check re-partition). Does that mean i need a pit file too?
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1303)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 7159 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The firmware i tried to flash (which already successfully flased before with home_csc instead) is N960FXXS3CSFC_N960FOXM3CSF9_EUR
vipercubic said:
Thank you for the suggestion. Now i'm getting "Repartition operation failed (I haven't check re-partition). Does that mean i need a pit file too?
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1303)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 7159 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The firmware i tried to flash (which already successfully flased before with home_csc instead) is N960FXXS3CSFC_N960FOXM3CSF9_EUR
Click to expand...
Click to collapse
did you load the pit file in Odin? if so, dont. Flash it without the pit. Go to the advanced tab and uncheck the pit if your version supports it
Youdoofus said:
did you load the pit file in Odin? if so, dont. Flash it without the pit. Go to the advanced tab and uncheck the pit if your version supports it
Click to expand...
Click to collapse
No i haven't load any pit files. I managed to flash after a couple of tries (with the "simple" CSC file) but unfortunatelly i'm in square 0 again.
Phone still not booting, Showing Samsung Galaxy S9+ (30+ minutes stucked there).
vipercubic said:
No i haven't load any pit files. I managed to flash after a couple of tries (with the "simple" CSC file) but unfortunatelly i'm in square 0 again.
Phone still not booting, Showing Samsung Galaxy S9+ (30+ minutes stucked there).
Click to expand...
Click to collapse
so, Odin finished successfully and your phone still wont boot?
vipercubic said:
No i haven't load any pit files. I managed to flash after a couple of tries (with the "simple" CSC file) but unfortunatelly i'm in square 0 again.
Phone still not booting, Showing Samsung Galaxy S9+ (30+ minutes stucked there).
Click to expand...
Click to collapse
Need to repair boot
Youdoofus said:
so, Odin finished successfully and your phone still wont boot?
Click to expand...
Click to collapse
Yes, unfortunatelly. This is odd isn't it?
ZeroXO said:
Need to repair boot
Click to expand...
Click to collapse
From what i understand flashing with odin will flash a new BL so isn't this supposed to fix any boot issues?
I still can't enter recovery though. Download mode still works.
N960FXXS3CSFC_N960FOXM3CSF9_EUR is for galaxy note 9 device, and you have galaxy s9 plus.
Sent from my SM-G965F using Tapatalk
vipercubic said:
Yes, unfortunatelly. This is odd isn't it?
From what i understand flashing with odin will flash a new BL so isn't this supposed to fix any boot issues?
I still can't enter recovery though. Download mode still works.
Click to expand...
Click to collapse
omg man... i just saw this. does the screenshot you posted up say that its flashing the G960 firmware?
edit: your first screenshot shows the 960 and 2nd the 965. you might need to flash the PIT since you flashed the wrong firmware on it
giuresu said:
N960FXXS3CSFC_N960FOXM3CSF9_EUR is for galaxy note 9 device, and you have galaxy s9 plus.
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
Youdoofus said:
omg man... i just saw this. does the screenshot you posted up say that its flashing the G960 firmware?
edit: your first screenshot shows the 960 and 2nd the 965. you might need to flash the PIT since you flashed the wrong firmware on it
Click to expand...
Click to collapse
God damn it, can't believe i've ****ed up this badly. I'm 90% sure that the N960 didn't flash anyway because it was failing from the begining (screenshot). Not 100% sure Though. Any idea where to find PIT files?
Thank you all for your time, much appreciated. Merry Christmass everyone.
vipercubic said:
God damn it, can't believe i've ****ed up this badly. I'm 90% sure that the N960 didn't flash anyway because it was failing from the beginning (screenshot). Not 100% sure Though. Any idea where to find PIT files?
Thank you all for your time, much appreciated. Merry Christmas everyone.
Click to expand...
Click to collapse
unsure. ill look for ya. S9+ right?
what storage size is your device?
last edit, i promise
https://www.sammobile.com/forum/threads/40925-Files-PIT-S9-S9
Youdoofus said:
unsure. ill look for ya. S9+ right?
what storage size is your device?
last edit, i promise
https://www.sammobile.com/forum/threads/40925-Files-PIT-S9-S9
Click to expand...
Click to collapse
S9+ 64GB
So according to this post, pit files should be part of the firmware? I'll try to unzip .tar files and have a look arround.
vipercubic said:
S9+ 64GB
So according to this post, pit files should be part of the firmware? I'll try to unzip .tar files and have a look arround.
Click to expand...
Click to collapse
yep, that should get ya where ya need to be. Ive flashed the wrong storage size PIT before and it REALLY ticked me off until i flashed the right one and fixed it
How do you repair boot?
madmike_ said:
How do you repair boot?
Click to expand...
Click to collapse
flash firmware in Odin
Related
So Samsung released an update for this phone last night, and I very stupidly hit install and I was rooted.
Now the only thing it boots to is clockwork recovery.
I downloaded the latest stock rom but odin won't flash it.
Think I got to flash the stock recovery to flash the rom, how do I do this?
Also, how do I root this again after updating?
You don't need the stock recovery to flash the ROM. Odin should flash it. What problem is it giving you when you try to flash? Do you have the right odin package?
GazaIan said:
You don't need the stock recovery to flash the ROM. Odin should flash it. What problem is it giving you when you try to flash? Do you have the right odin package?
Click to expand...
Click to collapse
Odin package? Don you mean the taar.md5? It's S7500XXLH3_S7500BTULH1_S7500XXLH1_HOME.tar.md5
I'm trying to flash it with Odin 1.85 with it loaded as a PDA
Yep, the tar.md5. What happens when you try to flash it? do one of the boxes at the top say "FAIL" or does it just freeze?
GazaIan said:
Yep, the tar.md5. What happens when you try to flash it? do one of the boxes at the top say "FAIL" or does it just freeze?
Click to expand...
Click to collapse
Just freezes left it for 15 minutes.
Log below
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXLH3_S7500BTULH1_S7500XXLH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
droobey said:
Just freezes left it for 15 minutes.
Log below
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXLH3_S7500BTULH1_S7500XXLH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
Click to expand...
Click to collapse
Update: OK turns out recovery and download are two completely different things.
Recovery Mode: volume up+ volume down + home + power (what it was booting to by itself)
Download Mode: volume down + home + power
Everything is working now!
Hi All
A friend of mine was using the leaked 4.1.2 firmware and every thing was fine , suddenly the device is stucked at Samsung Logo
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
Of course tried wiping the device from recovery but there is punch of errors as shown below
Any help ?!
Thanks in advance
Its stock recovery not CWM .
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
and what where and when would help .
jje
MohamedYousri said:
Hi All
A friend of mine was using the leaked 4.1.2 firmware and every thing was fine , suddenly the device is stucked at Samsung Logo
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
Of course tried wiping the device from recovery but there is punch of errors as shown below
Any help ?!
Thanks in advance
Click to expand...
Click to collapse
flash via pc odin may it help u
I an using Odin 3.07 for windows but with no luck , i get FAIL immediately
JJEgan said:
Its stock recovery not CWM .
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
and what where and when would help .
jje
Click to expand...
Click to collapse
You can wipe from stock recovery too. Op try download different rom and try again
Sent from my GT-I9300 using XDA Premium HD app
can a PIT file solve the problem or it will kill phone for ever ?!
Ausboy 2011 said:
You can wipe from stock recovery too. Op try download different rom and try again
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
every time i try to wipe i get the same error .... will try a 1 file ROM for 4.1.2 late but i guess that it will not work and problem is bigger than that
My SGS3 failed in much the same way, would not get past the first boot screen whatever I tried. I was able to get it into download mode with a jig, but could not flash anything to it. Samsung said they would take it back for repair but that would have meant being without it for over a week. Fortunately I'd bought it from Amazon and they were happy to send a replacement with next-day delivery.
Ausboy 2011 said:
You can wipe from stock recovery too. Op try download different rom and try again
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
Yes but with CWM advice would be to format ..
As we still dont know where Odin is failing its the end of the story .
jje
how can i install the custome recovery while the phone is dead ??!!
Odin using 1 file firmware
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> tz.img
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<ID:0/013> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
4 files ICS Firmware
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300ZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300ZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300ZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OZS_I9300OZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Damaged Nand replace motherboard .
jje
JJEgan said:
Damaged Nand replace motherboard .
jje
Click to expand...
Click to collapse
is this your final opinion , there is no other chance that i can solve this issue with software tries ?!
any other tricks i shall try ?!
try flashing the correct pit file, but that's your last shot
Glebun said:
try flashing the correct pit file, but that's your last shot
Click to expand...
Click to collapse
tried all PIT files for i9300 alone , with 1 file firmware and with 4 files firmware ICS and JB ,, same problem , PIT file is written succefuly but can't flash the firmware
if it's a dead end and the phone have the eMMC problem , the device is still in warranty but the counter is 3 and system is modified
is there a way to kill the device at all without being able to access the recovery or download mode so i can send it to warranty as this issue is already from samsung and not related to user
MohamedYousri said:
if it's a dead end and the phone have the eMMC problem , the device is still in warranty but the counter is 3 and system is modified
is there a way to kill the device at all without being able to access the recovery or download mode so i can send it to warranty as this issue is already from samsung and not related to user
Click to expand...
Click to collapse
that would be insurance fraud and that's a felony, can't discuss it here
Glebun said:
that would be insurance fraud and that's a felony, can't discuss it here
Click to expand...
Click to collapse
i agree with you if it was my fault and the phone damaged by me , it's already out from Samsung with this problem so we have the right to send it back to them even if we played with some costume ROMs or Root
anyway i guess erase nand flash in Odin will do the job ,, will give it a try the phone is already dead and useless and my frined lost it anyway
MohamedYousri said:
i agree with you if it was my fault and the phone damaged by me , it's already out from Samsung with this problem so we have the right to send it back to them even if we played with some costume ROMs or Root
anyway i guess erase nand flash in Odin will do the job ,, will give it a try the phone is already dead and useless and my frined lost it anyway
Click to expand...
Click to collapse
yeah, you can send it back, but damaging the phone to get warranty is, as mentioned before, fraud.
Hi There,
After using temasek's stock android rom a while without any problem my galaxy s3 won't turn on anymore. About a month ago my S3 suddenly shutted down and now I get a bootloop where I only see the samsung logo reappearing every 5 seconds. I can't go into recovery mode, only into download mode. So my phone is soft bricked i supposed.
I tried almost everything, I searched for weeks for a sollution on XDA and I didn't found anything that could help me. So now i'm asking you guys because i'm a little bit desperate and i'm using my old nokia 3310 for a couple of weeks now.
I tried to reinstall my original firmware which I downloaded on sammobile with odin but there is always some kind of error.
I tried several versions of odin (new one's, olders one's) And still no progress.
Here's the log from odin v 1.85 :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_PHN_I9300XXALE8_I9300PHNALE4_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I just checked off the box "PDA" and "AUTO REBOOT" and "F. RESET TIME" . When I use a pit file this is the log of odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_PHN_I9300XXALE8_I9300PHNALE4_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
I'm sure that i used the right firmware, I've tried different pc's, i've also tried differend firmwares... Always a damn error in odin...
Can anyone help me?
ID:0/006> There is no PIT partition.
If you use a PIT file it has to be the right PIT file .
jje
JJEgan said:
ID:0/006> There is no PIT partition.
If you use a PIT file it has to be the right PIT file .
jje
Click to expand...
Click to collapse
I used the GT-I9300_mx_20120329.pit file which was suggested in this topic: http://forum.xda-developers.com/showthread.php?t=1894548&highlight=stock+firmwares
Weird. Sounds like SDS. What kernel were you using aling with Temasek s ROM?? And which version??
dhirend_6d said:
Weird. Sounds like SDS. What kernel were you using aling with Temasek s ROM?? And which version??
Click to expand...
Click to collapse
Version 77 and his kernel!
A Hello,
I´m from Portugal and i have a smartphone GT-I9300.
It´s with an official rom but, with the update of firmware to 4.3 he just go erronius and now just play logo and nothing more. In recovery mode, i can´t do nothing, (Wipe / factory, nothing...) in download mode, it craches with kies, kies3, odin 3.7 untill 3.11. I tryad adb but it says "error: closed". it´s not rooted. so, i think in move on to root and install cyanogenmod (I have that in my GT-I9505 withaout problems).
Can any person help me? i will post some photos.:.
@2000hdi: before flashing any custom-ROM, you need a working firmware. So go to sammobile.com and download your correct 4.3-firmware and corresponding Odin and Win-drivers. Deinstall all KIES, Odin, Samsung-things on your PC. Follow the short instructions from download-site exactly. Use USB-port on mainboard. If Odin still doesn't recognize your phone, change USB-cable.
USB ok
Hello again ,
My USB cable, port, its ok, he recognises in odin but during instalation craches. In kies, he download the firmware but during instalation, frozes on 0%.
How can i put some photos to demonstrate?
Forget KIES. Post the Odin-log (text).
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin engine v(ID:3.1101)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
A friend told me about a file: pit 512 from the days he have is I9300 with the same problem and to use a oldest odin version like 3.1... but, i dont now...
Your partitions seem to be gone. Try Repartition, for 4.3. If this doesn't work, your NAND is gone.
Link to 4.3 down. In the others files i flashed, i used to test the repartition button. In case of nand. What to do?
...to say goodbye
Still another German source. If you know the procedure, you'll find the download-files though.
Great...
@2000hdi: done?
rp158 said:
@2000hdi: done?
Click to expand...
Click to collapse
Nop, i will have to buy a new motherboarder...
after PC use
Hello again, the photos are the result of using a pc XP, instead of a portable because the USB ports on motherboard, original cable and Odin 3.12. Can anyone explain what is the problem now and possible fix? Thanks.
Oficial firmware from sammobile
Anyone getting this error when trying to update to BRE2? Odin will flash ARA2 without a problem.
Never Mind. Didn't realize there's a newer version of odin, 3.13.1
jd1639 said:
Anyone getting this error when trying to update to BRE2? Odin will flash ARA2 without a problem.
Never Mind. Didn't realize there's a newer version of odin, 3.13.1
Click to expand...
Click to collapse
You just updated the ODIN? Then it's ok now? I have similar problems with yours.. unsupported dev
Biosystematics said:
You just updated the ODIN? Then it's ok now? I have similar problems with yours.. unsupported dev
Click to expand...
Click to collapse
Yes. The compression format for the firmware changed on Oreo and it needs an update Odin to run.
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
Anyone getting this error when trying to update to BRE2? Odin will flash ARA2 without a problem.
Never Mind. Didn't realize there's a newer version of odin, 3.13.1
Click to expand...
Click to collapse
Hello every one
I have Samsung galaxy C7 Pro (SM-C7010), I wished to install custom recovery TWRP and root my mobile.
After flashing custom recovery TWRP using odin 3.12.7 and samsung USB driver, my Mobile starts rebooting again and again,
I tired all suggestion given by XDA experts and you tubers, flash newer version of TWRP for samsung C7, wipe cache/delvik, factory rest, mout system etc.,
After all above mess, I decided to flash samsung offial firmware stock recovery ( using 4 file, BL, AP, CP,CSC) but during flashing I have this error "Unsupport dev_type"
This is the code, please help where the problem is?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn.lz4
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You need 3.13.1 version of odin. You're using an older version.
jd1639 said:
Anyone getting this error when trying to update to BRE2? Odin will flash ARA2 without a problem.
Never Mind. Didn't realize there's a newer version of odin, 3.13.1
Click to expand...
Click to collapse
Yeah, just update Odin. It works for me.
Thank bro.