i recently updated my sgs2 to 2.3.4 via OTA
b.band i9100xxki1
kernal 2.6.35.7-i9100xwki4-cl575468
build gingerbread.xwki4
unlocked sgs2 from phones4u
however i noticed as soon as i linked my google account to the phone i kept getting the message com.phone.android has stopped and when i clicke force stop it would show that i have no signal i rebooted the phone and didnt connect my google account and its working fine apart from the fact i cant sign into my google account anyone else experiencing the problem or no how to solve it
jason
jbartley88 said:
i recently updated my sgs2 to 2.3.4 via OTA
b.band i9100xxki1
kernal 2.6.35.7-i9100xwki4-cl575468
build gingerbread.xwki4
unlocked sgs2 from phones4u
however i noticed as soon as i linked my google account to the phone i kept getting the message com.phone.android has stopped and when i clicke force stop it would show that i have no signal i rebooted the phone and didnt connect my google account and its working fine apart from the fact i cant sign into my google account anyone else experiencing the problem or no how to solve it
jason
Click to expand...
Click to collapse
Try the following:
1. Clear app data:
Go to Settings menu => Applications => Manage applications => All => Dialer => Clear data.
Then reboot the phone.
If that does not help:
2. Wipe cache:
Shut down the phone. Then boot into recovery mode (Volume UP + Home + Power, hold the keys pressed until you see the recovery menu).
Then choose to wipe cache partition.
Then reboot the phone.
If that does not help either:
3. Factory reset:
Shut down the phone. Then boot into recovery mode (Volume UP + Home + Power, hold the keys pressed until you see the recovery menu).
Then choose to make a factory reset.
Then reboot the phone.
If that does not help ... puh ...:
4. Flash the ROM again:
I hope that you will not have to do this.
But just in case, then you should read Intratech's Official Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1075278
The first post is relevant.
There is a good, detailed and IMO very understandable description how to flash ROMs to your phone using Odin.
I prefer Frankenstein ROMs, as they are non-wipe, stable and build to be combined with any Modem and/or CSC files.
Good luck !
It_ler said:
Try the following:
1. Clear app data:
Go to Settings menu => Applications => Manage applications => All => Dialer => Clear data.
Then reboot the phone.
If that does not help:
2. Wipe cache:
Shut down the phone. Then boot into recovery mode (Volume UP + Home + Power, hold the keys pressed until you see the recovery menu).
Then choose to wipe cache partition.
Then reboot the phone.
If that does not help either:
3. Factory reset:
Shut down the phone. Then boot into recovery mode (Volume UP + Home + Power, hold the keys pressed until you see the recovery menu).
Then choose to make a factory reset.
Then reboot the phone.
If that does not help ... puh ...:
4. Flash the ROM again:
I hope that you will not have to do this.
But just in case, then you should read Intratech's Official Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1075278
The first post is relevant.
There is a good, detailed and IMO very understandable description how to flash ROMs to your phone using Odin.
I prefer Frankenstein ROMs, as they are non-wipe, stable and build to be combined with any Modem and/or CSC files.
Good luck !
Click to expand...
Click to collapse
thank you so much that worked!!!
Long story short is that i bough a china tablet - an ATM 7013 (GS701b without home button)and i tried all kinds of firmware until i tried one that ****ed up my tablet.
I cant enter recovery meny or anything else , the bootscreen stucks at TSLIB CALIBRATION - press enter to skip and the touch screen doesnt work to fix it .
How can i get pass that to go to recovery again - Power and volume up - same screen.
Thanks
So please can anyone help me get pass that TSLIB Calibration so that i can try other firmwares. thank you
Hello guys, since yesterday I have a problem with my Tablet and I don't know how to fix it..
So : yesterday, suddenly after turning on tablet, a message appeared, saying that the Police caught me in suspicious activities (?) with my Tablet and then that they fully blocked it, and I have to pay €100 for solve. I can't do nothing, go back, home, nothing.
Now : I know that it is a FAKE so a " virus " , the same thing happened to my PC time ago, and I easily fixed it by accessing Recovery Mode on PC and booting ComboFix. I modded the Tablet, so I thought " what if I send my Tablet in CWM Recovery and so some wipes? " and then I did, because I could long press power button so I could check " Go in CWM Mode " .
But then, the issue : sadly, for my fault, I just wiped cache and dalvik, and I don't know why, ( I don't know why I remembered this ) I remembered that I had to go on Mount storage and select Format System ( I know, my big fault.. I just realized later what I've done ) and then I rebooted.
So my Tablet now stays on " Lenovo screen " everytime I try boot it. I tried many times to access again on CWM Recovery ( by keeping pressed power button while turning it on, tried to press many times Vol+ and Vol- ) but nothing.. it doesn't enter in Recovery. I'm blocked and I don't know what to do!
If it would happen to my phone, I would already fixed it, because with it I can use tools via PC like Flashtool, so I could directly flash a new Firmware. But with Tablet I don't know what I can use..
I really hope you can help me, thanks!
Nobody know how to fix? Please, it's really urgent
Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
Good day! how did you manage to boot into Recovery Mode or Fast Mode?
After pressing the power button and seeing the display turn on. Keep spamming the power button and a menu will pop-up on screen with boot options. Short press of the power button cycles through the options, long press selects the option.
Mine was also stuck on a boot loop, even though I had not played around with any settings or tried to root etc. I was able to revive it by going into recovery mode and doing a factory reset.
Hey OP I've got hold of the same tablet I'm working on getting a rom dump atm. Bare with me I'll try and send a link for the img. If u can get into recovery mode where u can update zip. That's good if not try and via pc. Once u have a link to the tablets boatloader, rest is history.
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
bump please
ozviewer said:
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
Click to expand...
Click to collapse
not working in my pendotab window 8
Hi,
I could get no further with mine, the same as you.
I contacted Pendo Support, and explained it would work but not boot, I even asked for the image file so I could reload it in recovery mode, however, they did not have access to it, the Chinese manufacturer had not made it available to them.
As I described it was not damaged, but simply not working, they agreed to send me a replacement, even though it was out of warranty, as really, as I said to them, it was not fit for purpose.
I had to send the old one back, but they sent me a satchel in which to do so, at no cost to me.
They sent me the new one very promptly.
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
I tried to upgrade a similar device to 5.x, some changes, but some options now not working I have a clone Q88H device, A33 quadcore processor 7" clone. Kernel 3.4.39, firm ware 2.1 Need to go back to 4.4.2 w latest update. Hopefully Play store will work again, as I need it. That, or change to windows version. advice pls?
drusid said:
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
Click to expand...
Click to collapse
Please i dont have a needrom account i cant download plz who Can send me the direct link to m'y account
Hello, I registered here in XDA to only ask a question.
I have a phone (Hyundai e501) that's bugged in the no command screen.
My aunt gave me the phone with the description of 'just fix it'. My guess is that the ROM is corrupted so I tried to flash a new one (if that's how it's called).
I saw a YouTube tutorial and got pretty far until it said that the phone has no space.
So my question is: how can I factory reset / format the phone without starting it? I tried to use the recovery menu but it automatically says 'No command', even when I'm not trying to get to the recovery menu.
I tried the combination of buttons that said to get to the 'No command' screen with the power and vol up button pressed and then click and unclick vol up button and it didn't work.
Is there a program that could help me? If there's not it could be a hardware issue? Thanks!