This is a guide on how to enable VoLTE and Wi-Fi calling on the Mi 9 and (possibly) other MIUI 11 devices.
NOTE: Wi-Fi calling WILL NOT work if your carrier doesn't support it.
Root is required for any of this to work.
Download the Wi-Fi calling document because you will need the text inside
Go ahead and download build.prop editor by JRummy Apps from the play store. Open the app, allow superuser access, more permissions, blah blah blah whatever.
Now, press the pencil (that means edit the document) and scroll all the way to the bottom. Right at the end, go down a line and paste the text from the document. Now press save (floppy disk icon). Refer to image 1 if you had a hard time understanding this.
After doing this, restart your phone.
Now, go to settings, tap on SIM Cards and Network, tap on your (main) SIM card, and an option should be visible and should be asking you if you want to use WLAN to make calls. Image 2 should tell you what it should look like
Now to make sure that Wi-Fi calling and VoLTE is on, go to settings again, tap on My Device, tap on All Specs and tap on Internal Storage several times until a network testing menu appears. Tap on phone Information 1 (or wherever your main SIM card is on) and find an option called Mobile radio Tower. If you are having a hard time finding that, look at image 3. Wi-Fi calling, video calling, and VoLTE should all be turned on.
The VoLTE option sometimes doesn't turn on. To fix that, you just need to turn off the Mobile radio Tower option off, wait for it to slide to "off" and wait for a couple of seconds. Turn it back on and wait until the VoLTE option has slid to "on".
If all three are working, congrats! You have Wi-Fi calling and VoLTE!
Hope this helps!!
Thank you! That works for me!
marvinsafco said:
Thank you! That works for me!
Click to expand...
Click to collapse
Glad to hear it, chief!
I need some help. VoLTE keeps off after turning off and on radio tower. It always happens with stable xiaomi eu but not with developer.
Nevermind it's working now lol
sonicxd64 said:
Nevermind it's working now lol
Click to expand...
Click to collapse
yeah, it can be difficult at times... but, nonetheless, im glad its working for ya!
There is any way to fix it without root? I have bank app and I don't want to root my phone
Related
hi all,
just recently bought a hero and sorry for the noob questions. any help will be greatly appreciated.
1.) How do i activate the green notification light for any new notifications? so far i can only use the trackball to flash for a number of minutes and thats it.
2.) how can i permanently use 3g as a signal without switching back to edge? i prefer 3g because it is faster, but when i use the web, it reverts to edge making it slower when browsing. i want it never to switch back to edge just 3g.
3.) How do you update radio and rom? is it the same with winmo? i have a topaz and im currently using hero.
Thanks for any feedback!
So far the only answer i found was the notification light as a bug or a defect. line switching is still unsolved and updating.
orouborus said:
So far the only answer i found was the notification light as a bug or a defect. line switching is still unsolved and updating.
Click to expand...
Click to collapse
1) It works as it is stated in the user's manual. How can you state that it is a bug or defect? Funny... Just because it works that way on Magic or G1 does not mean that it has to be the same on Hero.
2) You cannot as your phone will automatically switch between them when one another is not available. You phone will select 3G only if it is available around where you are. If it switches to Edge/GPRS/whatever, that means you don't have 3G signals around you.
3) There are 1.000 posts on the forum here regarding updating ROM, etc. Search is our best friend.
cokbok said:
2) You cannot as your phone will automatically switch between them when one another is not available. You phone will select 3G only if it is available around where you are. If it switches to Edge/GPRS/whatever, that means you don't have 3G signals around you.
Click to expand...
Click to collapse
You can force HSDPA, but you do so at your own risk!
You need to download AnyCut from the Market and create new shortcut to the activity "Phone Info". From this short cut, you access a screen which gives lots of diagnostic info about the phones state and there is an option to "Set preferred network type". By default this is "WCDMA Preferred", but if you want to force to always use HSDPA you should select "WCDMA Only".
Note if you do this, your phone will never drop back to 2G, even if a 2G signal is available and a 3G one isn't.
I wouldn't advise playing around with any of the other options in this screen unless you know what you are doing!
Regards,
Dave
cokbok said:
1) It works as it is stated in the user's manual. How can you state that it is a bug or defect? Funny... Just because it works that way on Magic or G1 does not mean that it has to be the same on Hero.
2) You cannot as your phone will automatically switch between them when one another is not available. You phone will select 3G only if it is available around where you are. If it switches to Edge/GPRS/whatever, that means you don't have 3G signals around you.
3) There are 1.000 posts on the forum here regarding updating ROM, etc. Search is our best friend.
Click to expand...
Click to collapse
thanks for the info about point 2.
Thanks again!
foxmeister said:
You can force HSDPA, but you do so at your own risk!
You need to download AnyCut from the Market and create new shortcut to the activity "Phone Info". From this short cut, you access a screen which gives lots of diagnostic info about the phones state and there is an option to "Set preferred network type". By default this is "WCDMA Preferred", but if you want to force to always use HSDPA you should select "WCDMA Only".
Note if you do this, your phone will never drop back to 2G, even if a 2G signal is available and a 3G one isn't.
I wouldn't advise playing around with any of the other options in this screen unless you know what you are doing!
Regards,
Dave
Click to expand...
Click to collapse
very interesting. because for my topaz i always set it to wcdma only. willing to give it a try. where can i download it? do i need a gmail account for this? cant find it any website where it can be downloaded.
Android software is downloadable via the Android Market application on your hero - any purchases are made by using a google checkout account which is set up like paypal so you don't need to enter your details all the time...
Dayzee
Dayzee said:
Android software is downloadable via the Android Market application on your hero - any purchases are made by using a google checkout account which is set up like paypal so you don't need to enter your details all the time...
Dayzee[/QUOT
i tried logging in the market and there are TONS of applications! had to make a gmail accouint for this. hehe!
Click to expand...
Click to collapse
Ya!! What a great resource!! Very different to the WMo world and I like it a lot.....
Dayz
No need to do the workarounds anymore, if you're on Lollipop now just go to Advanced Calling and activate it!
GigaSPX said:
No need to do the workarounds anymore, if you're on Lollipop now just go to Advanced Calling and activate it!
Click to expand...
Click to collapse
I'm assuming that would mean official lollipop is iminent
GigaSPX said:
No need to do the workarounds anymore, if you're on Lollipop now just go to Advanced Calling and activate it!
Click to expand...
Click to collapse
cool I'm going to delete my workaround if I can figure out how. Wonder if it's 509... And I just read a post on here about stagefright 2.0 ****ing bullshat so our phones are still vulnerable to specialy modified mp3 and mp4- so someone can do remote executions. but so is everyone elses phone...
I do hope this is something positive, not getting to hopeful just yet, have not seen any indication of a OTA yet.
1linuxfreak said:
I do hope this something positive, not getting to hopeful just yet, have not seen any indication of a OTA yet.
Click to expand...
Click to collapse
What differences do you hope in seeing in the OTA from what's already out?
GigaSPX said:
What differences do you hope in seeing in the OTA from what's already out?
Click to expand...
Click to collapse
Final build, did you say the or someone else that the .ftf R4C still didn't have the Stagefright patch? I do hope the final release has that patched and the new Stagefright 2 patch as well.
I have beta tested Winders/Linux and other software for years and the final release is well final, may be some bugs still but most are squashed and gone.
This is not my first pony ride, although I have not posted on XDA I have been active in the Android community since the first Moto Droid, just not on XDA.
Have used Linux since Red Hat then Corel days, Google it.
Thanks for the heads up. I was able to activate it from the My Verizon app on stock KitKat. I've never flashed lollipop either
cccthestyle said:
Thanks for the heads up. I was able to activate it from the My Verizon app on stock KitKat. I've never flashed lollipop either
Click to expand...
Click to collapse
that's interesting so we could have had this all along. I thought kitkat didn't support advanced calling natively that's what I've read and I know our phones don't have dual radios so I don't get it I want to revert back to test it but I will take your work for it. Do you actually have 4g when on a call now. and can you use the Internet while on the phone.
Tigerhoods said:
that's interesting so we could have had this all along. I thought kitkat didn't support advanced calling natively that's what I've read and I know our phones don't have dual radios so I don't get it I want to revert back to test it but I will take your work for it. Do you actually have 4g when on a call now. and can you use the Internet while on the phone.
Click to expand...
Click to collapse
We wouldn't have had this all along because in the my verizon app if you tried to add the advanced calling feature to a line with an xperia Z3v you'd get an error saying it wasn't a volte capable device. It referred you to a list of volte capable devices and the z3v wasn't on the list. I do however do not understand how advanced calling would work on kitkat.... for one thing they're missing proprietary libs for HD video calling as well as the apps and the IMS bootstrap to keep advanced calling on between reboots, but hey if it's working for people on Kitkat that's wonderful news, they deserve it. I'd take it as a good sign that they finally got around to adding volte in their systems, to me that says the OTA is greenlighted and we're just waiting on the beginning of the roll out. What's disappointing is that Verizon is giving us 5.0.2, but hey it's better than what we've had. I'm grateful.
I can confirm mine is working on 5.0.2.
Has anyone else been unable to mute calls that are not HD Voice?
Today I deactivated advanced calling. I believe it was causing excessive noise during Bluetooth calls. I never had Bluetooth issues before Lp and advanced calling. 4.4 was flawless for me
Added advanced calling to my stock 4.4 phone, but I don't get simultaneous voice and data during calls. ?
Tigerhoods said:
that's interesting so we could have had this all along
Click to expand...
Click to collapse
Not quite -- I'm on stock 4.4 and I've enabled the feature with Verizon, but after rebooting my phone I still don't see an option to turn on Advanced Calling features. (Am I missing them in the menus? Where are they?)
MobyGamer said:
Not quite -- I'm on stock 4.4 and I've enabled the feature with Verizon, but after rebooting my phone I still don't see an option to turn on Advanced Calling features. (Am I missing them in the menus? Where are they?)
Click to expand...
Click to collapse
That's the lollipop part. The advanced calling is it's on tab in the OS settings.
Anyone else have issues with activating advanced calling. I select the HD calling in the settings. I get a message that indicates I already have HD calling and that I should restart my phone. Restart and same message pops up when I get a call that I don't have data while on a call.
Sent from my D6708 using Tapatalk
Solution: had to delete HD calling from Verizon, waited over night then added HD calling from the settings menu. Don't know how many times I've added and removed advanced calling before but waiting seemed to do the trick.
Sent from my D6708 using Tapatalk
How do i deactivate advanced calling. I have had tons of issues since activating it. I still get a message when i get calls saying no data available, i also cannot enter credit card numbers. I have not been able to successfully enter a card number even once since activating it, every time i am very careful an hit the right keys but it says thats not a working card. I have had no issues what so ever doing that before activation of advanced calling. Is there a way to remove or deactivate it completely or at all?
Samwest1 said:
How do i deactivate advanced calling. I have had tons of issues since activating it. I still get a message when i get calls saying no data available, i also cannot enter credit card numbers. I have not been able to successfully enter a card number even once since activating it, every time i am very careful an hit the right keys but it says thats not a working card. I have had no issues what so ever doing that before activation of advanced calling. Is there a way to remove or deactivate it completely or at all?
Click to expand...
Click to collapse
Just turn it off. There's a toggle in settings... If you're on lollipop.. Which if you're not, I guess you could do it in my verizon add remove features
Well i never actally turned any of the toggles on. I just activated advanced calling thru my verizon app. Since i activated it, i have not been able to enter a credit card number sucessullly, i know that advanced calling feature was the change that made my poblem. Becouse before activating it i never had an issue, but within a couple hours of activating it, i tried to enter my credit card number over phone call and every single time (ive tried so many times since the activation of advanced callig) every time it tells me sorry, thats not the right number. Ive tried with multiple cards, and the same result evey time. I just want to know, besides turnig off the toggles in settings( that i never used or turned to on). Is it possible to deactivate it thru verizon or delete it from my account. Can someone help me figure it out. It has been a huge inconveniance for me. The only toggles i have in settings are one for hd voice and one for video calling, and on above those 2 that is not labled and i figured was to turn advanced calling on or off. I never used it. When i first activated it ,it was done through my verizon app, an i didnt realize till reading more later on here , that there was section in settings for advanced calling. By that time i was already trying to remove it due to my card number entering issues, so i never turned any of the toggles on. Anyone know of anything that i could do to remove the feature completely.
I don't know if there is another thread out there that has this same info in it, if so i totally apologise. This is for people on android 5.0+ but also worked on previous android versions as well. Also this was just the way i choose to do it so that my LTE antenna would be totally off all the time.
1) Go into service mode *#0011*# hit menu:back next menu:key imput, type in "Q0"
2) #1UMTS
3) #1DEBUG SCREEN
4) #6PHONE CONTROL
5) #1DRX CONTROL
Click on LTE Rx0 And Rx1 off. Your phone will reboot by itself. When it turns back on it will only stay on 3g from now on unless you go back through those steps and turn it back on.
Not 100% sure if that is the most beneficial way to do it but when i didn't want 4g on at all to conserve data and battery life that was how i did it but i actually did it on accident the first time but after i figured out what i did i then used that method all the time especially now since android doesn't give the option to switch through mobile networks.
I got the hidden menu you described using *#0011#, but I can't get anything else to work. When I press the menu key, I see the menu and the option BACK, but nothing happens when I press it. I don't see the "next menu" step. Any advice? Could you maybe tell me how to do this like I'm 3 years old? I'm so annoyed cod the only way I can text on this verizon s4 is via mms since I switched to tmobile. I managed to get root but still haven't found a way to subvert the verizon smsc setting.
Thanks in advance!
apexofservice said:
I got the hidden menu you described using *#0011#, but I can't get anything else to work. When I press the menu key, I see the menu and the option BACK, but nothing happens when I press it. I don't see the "next menu" step. Any advice? Could you maybe tell me how to do this like I'm 3 years old? I'm so annoyed cod the only way I can text on this verizon s4 is via mms since I switched to tmobile. I managed to get root but still haven't found a way to subvert the verizon smsc setting.
Thanks in advance!
Click to expand...
Click to collapse
To fix your smsc follow this guide http://forum.xda-developers.com/gal...utorial-make-verizon-s4-functional-t-t3277682
you subscribed a tutorial that is good but before posting submit the title in the title section then you will be shown automatically that there is related post already available in the forum or not .
Hi Fellow ATT S7E Owners,
Some of us have chosen to stay Stock on this phone. My primary reason is not tripping Knox and using Samsung Pay. I have been trying to fix most issues or workarounds:
1. AdBlocking
2. Mobile Data toggle
3. Package Disabler to turn down the bloat
But for us ATT users, there is this annoying continuous notification that pops when we turn off data for the first time, after a reboot, EVER IF, we have WiFi on ! It goes, "Mobile data is turned off."
Googled and researched ways of getting rid of this annoying message. Wondering if any of you had success with it? Getting all of us to talk about it to see if there is a solution, thank you!
ProFragger said:
Hi Fellow ATT S7E Owners,
Some of us have chosen to stay Stock on this phone. My primary reason is not tripping Knox and using Samsung Pay. I have been trying to fix most issues or workarounds:
1. AdBlocking
2. Mobile Data toggle
3. Package Disabler to turn down the bloat
But for us ATT users, there is this annoying continuous notification that pops when we turn off data for the first time, after a reboot, EVER IF, we have WiFi on ! It goes, "Mobile data is turned off."
Googled and researched ways of getting rid of this annoying message. Wondering if any of you had success with it? Getting all of us to talk about it to see if there is a solution, thank you!
Click to expand...
Click to collapse
There is very simple solution . Turn your data on. If you worry that you get overages turn off some background data for apps. When you on WiFi your mobile data is not in use.
For all the hype about having control over your notifications, not being able to change this one is super annoying. I'm also guessing AT&T is trying to get us to us as much data as possible so they change charge us more.
norbarb said:
There is very simple solution . Turn your data on. If you worry that you get overages turn off some background data for apps. When you on WiFi your mobile data is not in use.
Click to expand...
Click to collapse
It shouldn't have to be this way, if I don't want data on, don't you agree? Why have needless signal processing or searching when I don't need something? ?
aggiesherpa said:
For all the hype about having control over your notifications, not being able to change this one is super annoying. I'm also guessing AT&T is trying to get us to us as much data as possible so they change charge us more.
Click to expand...
Click to collapse
Tell me about it bud! Wish we had a way to slay it... For people wondering what this is, I'm attaching a screen shot...
The only way to get rid of it for now which is not very fun btw, Swipe right on the notification until you see the gear on the left and tap the gear. After that tap "phone" with the green icon next to the word "phone" and then tap "force stop".
So far that's the only way to get rid of it.
Vicpdx18 said:
The only way to get rid of it for now which is not very fun btw, Swipe right on the notification until you see the gear on the left and tap the gear. After that tap "phone" with the green icon next to the word "phone" and then tap "force stop".
So far that's the only way to get rid of it.
Click to expand...
Click to collapse
Thanks, but couldn't that endanger us getting a phone call, necessarily 100% of the time?
any news ? any way to disable it permanently ?
Interesting. I've never seen this on my S7E & I have mobile data permanently off.
Is it solved yet???
ProFragger said:
It shouldn't have to be this way, if I don't want data on, don't you agree? Why have needless signal processing or searching when I don't need something?
Tell me about it bud! Wish we had a way to slay it... For people wondering what this is, I'm attaching a screen shot...
Click to expand...
Click to collapse
Hello! did you found a way to solve this problem? and what theme were you using when you took that screen shot? thank you!!
ChavaG. said:
Hello! did you found a way to solve this problem? and what theme were you using when you took that screen shot? thank you!!
Click to expand...
Click to collapse
No Sir it was never solved and I moved on to the S8+.
The Theme I was using was called, "Red Strokes" I believe with custom icons and a wallpaper.
Hope someone cracks this!
Galaxy s9, Android 8.0.0 here. Following worked for me, check if it works for you:
1. Go to Settings
2. Go to Developer Options
3. Look for "Keep Mobile data turned on". Uncheck that.
And hopefully, voila...
EDIT:
This method does not work anymore...
1. Settings
2. Apps
3. Select Options, then Show System Apps
4. Locate "Phone" (Maybe there will be 3)
5. Select every "Phone" App that you find and select "Force to Stop"
and the message dissapers.
(If you restart the phone you will need to do this again).
Hello fellow Note8 and Tasker users. I'm huge fan of both and usually have lots of questions on how to accomplish things in Tasker. Some of those things are device specific, so I thought a thread here may be handy.
Let me start with this: does anyone know how to use Tasker to activate PowerSave mode? I'm a teacher and I'd love to have this active when I'm teaching (then turn that off during my lunch break/plan period). Is there a certain intent I'd have to send? Or is it simpler?
Also, without root, I cannot turn on/off mobile data or adjust GPS settings...
Any workaround that you guys know of?
Here you go: https://www.reddit.com/r/tasker/comments/4zsi0e/project_share_toggle_settings_eg_location_mobile/
In case Tasker can't help you, I am doing everything you have mentioned using Bixby Voice. Just set up the Quick Actions and assign a voice prompt to it.
wnp_79 said:
In case Tasker can't help you, I am doing everything you have mentioned using Bixby Voice. Just set up the Quick Actions and assign a voice prompt to it.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=y8M-cJYszKE
Spere said:
Here you go: https://www.reddit.com/r/tasker/comments/4zsi0e/project_share_toggle_settings_eg_location_mobile/
Click to expand...
Click to collapse
This... Is... Amazing!!! Thank you!!
PsiPhiDan said:
This... Is... Amazing!!! Thank you!!
Click to expand...
Click to collapse
not work help _?
wnp_79 said:
In case Tasker can't help you, I am doing everything you have mentioned using Bixby Voice. Just set up the Quick Actions and assign a voice prompt to it.
Click to expand...
Click to collapse
That's actually really cool and I didn't know it could do that. The beauty of Tasker however is that it's automated. I don't even have to think about it. I step into work and my phone is on Powersave mode with no mobile data connection or Wi-Fi (while I teach). I get in my car and my GPS is in high accuracy mode. I go in the library and my phone is on silent. I go to a house I'm tutoring in and my calculator app is already pulled up. It's a thing of beauty!
Okay so it turns out the method linked earlier is already "prepackaged" so to speak: it's included in Auto Tools! I already had that app and didn't even know it could do this. So you still need to use ADB to grant it the proper permissions but it will save you the effort of getting the app factory and importing the xml file and exporting the app.
I'm excited to see if I can toggle mobile data this way! It seems to be hit or miss for different devices. Anyone tried on their Note 8?
Spere said:
Here you go: https://www.reddit.com/r/tasker/comments/4zsi0e/project_share_toggle_settings_eg_location_mobile/
Click to expand...
Click to collapse
I have been reading over this for a while. I was wondering if this would allow for toggling on and off wifi hotspot? I've been trying, but I read something regarding Nougat and how the name/service or something was changed.
I have no problem toggling it off and on using the quick tiles, but I have an Android car unit that I use my Hotspot for.
This worked on my older phones, being able to stick an NFC tag to my phone mount in the car to toggle the Hotspot on when placed in it. Or having the Hotspot start/stop when connecting or disconnecting from the unit's Bluetooth.
Thank you for any help in advance.
@wigglitz I'm not sure how to toggle Hotspot, at least didn't find anything related on System-, Global or Secure Settings.
If you are using Toggle Setting method linked before, here is how you can find what you can change:
These commands will show you list of available settings with current values
Code:
adb shell settings list secure
adb shell settings list global
adb shell settings list system
Now, if you are unsure if some setting is what you think it to be, I'll give you an example how to check it.
Let say by using command adb shell settings list secure you find setting install_non_market_apps
Now if you are unsure if that is the one toggling Unknows sources on/off, do this:
Toggle Unknows sources off from settings, then type:
Code:
adb shell settings get secure install_non_market_apps
This will return 0 (because you set if off)
Toggle it back on from settings and run same command, now it will return 1
Now you can be pretty sure that's the one and will be able to make task to automatically allow installing apps from unknown sources when opening Substratum (for example)
wigglitz said:
I have been reading over this for a while. I was wondering if this would allow for toggling on and off wifi hotspot? I've been trying, but I read something regarding Nougat and how the name/service or something was changed.
I have no problem toggling it off and on using the quick tiles, but I have an Android car unit that I use my Hotspot for.
This worked on my older phones, being able to stick an NFC tag to my phone mount in the car to toggle the Hotspot on when placed in it. Or having the Hotspot start/stop when connecting or disconnecting from the unit's Bluetooth.
Thank you for any help in advance.
Click to expand...
Click to collapse
Look into Auto Tools (Tasker plugin). That's what I'm using instead. There's definitely an option to toggle hotspot. There's literally hundreds of settings to tinker with, but my understanding is that the success of the individual options depends on the phone model.
I'm testing to see if I can toggle mobile data on the Note 8 and if time, I can test wifi hotspot too. :good:
GOOD NEWS!!!
Mobile data CAN be enabled/disabled without root on the Snapdragon model!!
Use the app Auto Tools with Tasker, give the appropriate permissions with ADB, and it works beautifully!! I'm so happy. ???
GPS works too - I can change it from battery saver to high accuracy and back at will.
I used to disable Mobile data, but now I leave it ON all the time. When you connect to wifi it's not in use so why to even bother turning it off? When I'am not on Wifi it's on. What I'am thinking of doing to save more battery is switch to 2G when connected to wifi, my 3GB/4GB signal strength is not so good. Should save a lot of battery when at home.
mankvl said:
I used to disable Mobile data, but now I leave it ON all the time. When you connect to wifi it's not in use so why to even bother turning it off? When I'am not on Wifi it's on. What I'am thinking of doing to save more battery is switch to 2G when connected to wifi, my 3GB/4GB signal strength is not so good. Should save a lot of battery when at home.
Click to expand...
Click to collapse
I am a teacher. The wifi signal in my building isn't great plus I don't need it anyway when I teach. I turn off pretty much everything during the times I teach. I have Tasker turn Wi-Fi back on for my lunch/plan period and turn off powersave mode. I used to lose 30%+ a day at work while not even touching my phone (awful signal primarily). I'm hoping this helps me keep it to 10% or less lost. I'll report back!
PsiPhiDan said:
I am a teacher. The wifi signal in my building isn't great plus I don't need it anyway when I teach. I turn off pretty much everything during the times I teach. I have Tasker turn Wi-Fi back on for my lunch/plan period and turn off powersave mode. I used to lose 30%+ a day at work while not even touching my phone (awful signal primarily). I'm hoping this helps me keep it to 10% or less lost. I'll report back!
Click to expand...
Click to collapse
Turning wifi is a must if you leave it on it will always scan for new wifi and drain battery. I use signal towers to turn it on when at home and off when not, works rly good and no battery drain.
Any idea how to turn on the Blue Light Filter with Tasker? I'm using Autotools as well. Can't seem to get the setting values to adjust. I tried the system setting Blue_Light_Filter and set it to 1, but that didn't work.
PsiPhiDan said:
Any idea how to turn on the Blue Light Filter with Tasker? I'm using Autotools as well. Can't seem to get the setting values to adjust. I tried the system setting Blue_Light_Filter and set it to 1, but that didn't work.
Click to expand...
Click to collapse
If auto tools can't help you can toggle any quick toggle with auto input.
mankvl said:
If auto tools can't help you can toggle any quick toggle with auto input.
Click to expand...
Click to collapse
I tried that but when I give Auto Input accessibility rights, my phone turns to a slug. Everything lags. It immediately stops when I remove accessibility rights. Do you have a similar issue or have you tried Auto Input on this phone yet?
PsiPhiDan said:
I tried that but when I give Auto Input accessibility rights, my phone turns to a slug. Everything lags. It immediately stops when I remove accessibility rights. Do you have a similar issue or have you tried Auto Input on this phone yet?
Click to expand...
Click to collapse
I'am using it to toggle NFC and 0 lag on the phone. Rly strange. I might try auto tools saw one script/app that can toggle such things now ?