Dualshock 4 controller pairs up using the PS+Share option, but my Redmi 5 plus doesn't react to any input from it. Getevent shows nothing.
Same goes if I use OTG adapter to connect it via USB, just puts the controller on charge instead of detecting it as an input device.
Using AospExtended 7.0, but also tried it in both Pie and Oreo ROMs and even MIUI. No reaction at all.
And I'm pretty sure it's not my controller, as it pairs up and works just fine with my old phone(Asus ZC500TG).
1Controller Magisk module didn't help.
Tried on both 4.9 and 3.18 kernels, no effect.
If anyone's got an idea, feel free to share. :good:
i know 1Controller does not work with miui10
killergg said:
i know 1Controller does not work with miui10
Click to expand...
Click to collapse
It doesn't work on any ROM that I've tried, not just MIUI. As I said, getevent returns nothing, even when it's plugged in via OTG.
hello aurismat, this is something kernel related. But I have not the skill to get into the details. It stopped somewhere in the pie roms.
Try dot os 2.4 (8.1. rom) it should be working.
E.g.: Syberia pie 2.1 it works, but not with 2.3 version. Curiously if you extract the kernel from Syberia pie 2.1 to later versions, the ps4 controller does work again.
with latest genom kernel it works again
Related
Hey guys! I'm having issues with the USB C audio port after installing Lineage. Here's the problem and what I've done so far: The USB C earphones that came with the phone are not recognized when plugged in. I had used them with the stock ROM and they worked fine, that was until I flashed Lineage on my phone and now the earphones don't work. I went into the developer options and selected the USB port to be (audio source) and also disabled/enabled the automatic USB audio rerouting option under [media]. Neither option helped whether I enabled or disabled them (rebooting in between changes). Now, the port works fine if I plug in the USB C-to-3.5mm jack adapter and either a speaker or earphones on the adapter. The audio signal is fine then, it just doesn't work if the earphones are type-C themselves. I also tried going into the Lineage OS OTA update option and updating the OS from there to maybe solve a firmware issue, but the update always fails, stating that I have to check my internet connection. This happens on both Cellular signal and over Wi-Fi. So, I'm unable to use my earphones, AND unable to update Lineage. Any ideas? I appreciate whatever help you can provide.
use other roms
4r4ujo said:
Hey guys! I'm having issues with the USB C audio port after installing Lineage. Here's the problem and what I've done so far: The USB C earphones that came with the phone are not recognized when plugged in. I had used them with the stock ROM and they worked fine, that was until I flashed Lineage on my phone and now the earphones don't work. I went into the developer options and selected the USB port to be (audio source) and also disabled/enabled the automatic USB audio rerouting option under [media]. Neither option helped whether I enabled or disabled them (rebooting in between changes). Now, the port works fine if I plug in the USB C-to-3.5mm jack adapter and either a speaker or earphones on the adapter. The audio signal is fine then, it just doesn't work if the earphones are type-C themselves. I also tried going into the Lineage OS OTA update option and updating the OS from there to maybe solve a firmware issue, but the update always fails, stating that I have to check my internet connection. This happens on both Cellular signal and over Wi-Fi. So, I'm unable to use my earphones, AND unable to update Lineage. Any ideas? I appreciate whatever help you can provide.
Click to expand...
Click to collapse
use aicp or rr or dirty unicorns
shivatejapeddi said:
use aicp or rr or dirty unicorns
Click to expand...
Click to collapse
I've checked the info on the other ROMs and it seems each one has its own issues with bugs on Nougat versions that need ironing out. I think I'll stick with Lineage OS for now, unless you guys REALLY suggest I switch to a different ROM for stability, support, etc.. The only thing that kind of worries me now is the update fails, I don't know if I'll be able to get updates on the OS. I've never flashed an update over an already installed OS. Is that possible? Say I go on the website and find an updated version of Lineage (once released) Can I download it and update over TWRP? or how would it be done?. Sorry if these are Noob questions. Thanks in advance for any help.
Same problem with earphone USBc3 not working
I have the same problem with my Max 2 after installing an update around 27 July. The earphone is not detecting, you only can use the bluetooth.
Heyyo, try it with the LeEco logo facing backwards. Oddly enough for Nougat ROMs the USB type C CDLA headphones seem to only work properly with that logo backwards... Might be a byproduct of no blobs from LeEco for Nougat but I could be wrong
Hello,
I had the same issues with newest versions of this ROM. I have solved (for now) coming back to 14.1-20170721 version; after reinstalled this version with TWRP over the newest the Leeco headphones with USB-C plug started to work again.
Regards
Hey guys! I'm having issues with the USB C audio port after installing Lineage. Here's the problem and what I've done so far: The USB C earphones that came with the phone are not recognized when plugged in. I had used them with the stock ROM and they worked fine, that was until I flashed Lineage on my phone and now the earphones don't work. I went into the developer options and selected the USB port to be (audio source) and also disabled/enabled the automatic USB audio rerouting option under [media]. Neither option helped whether I enabled or disabled them (rebooting in between changes). Now, the port works fine if I plug in the USB C-to-3.5mm jack adapter and either a speaker or earphones on the adapter. The audio signal is fine then, it just doesn't work if the earphones are type-C themselves. I also tried going into the Lineage OS OTA update option and updating the OS from there to maybe solve a firmware issue, but the update always fails, stating that I have to check my internet connection. I also tried downloading the latest nightly manually and using the data/data/org.lineageos.updater/app_updates directory to update, but it failed as well. My last resort was to try to update by flashing from TWRP in recovery, however that ALSO failed, I got an error message saying I was attempting to update over incompatible data. So, I'm unable to use my earphones, AND unable to update Lineage. I'd rather not have to factory reset, but do you have any ideas? I appreciate whatever help you can provide.
CDLA has been somewhat problematic under various Noguat ROMs for awhile now. Ex. audio works on them with the most recent Resurrection Remix-Nougat build, but they no longer respond to mic button presses.
I'm sure it will be fixed relatively soon, but it's an annoyance for now... ?
Hello,
I had the same issues with newest versions of this ROM. I have solved (for now) coming back to 14.1-20170721 version; after reinstalled this version with TWRP over the newest the Leeco headphones with USB-C plug started to work again.
Regards
How do we get lineages to revert the problem code? How to report it? I have just updated to latest lineages and they don't work
this is really sad and still an issue with latest version :/
Sadly this does not work under 14.1-20180304
I have a pocophone F1 with lineage os installed.
I tried to connect a ps4 dualshock controller first via Bluetooth than using otg and neither worked. I installed the 1controller magic module but nothing changed.
The controller is seen as an input device and is connected but nothing happens when I press a button. I tried using different apps to see if they detect the inputs but they don't.
Does anyone know how to fix this issue?
Ps
I didn't have this problem on MIUI
install the latest twisted kernel ... problem solved
AliNT77 said:
install the latest twisted kernel ... problem solved
Click to expand...
Click to collapse
I installed the kernel and now the controller works but after a few seconds I start to get input lag. Is there any way to fix this? Thanks.
skaczynski12 said:
I installed the kernel and now the controller works but after a few seconds I start to get input lag. Is there any way to fix this? Thanks.
Click to expand...
Click to collapse
Use a wired connection
Hey guys
I have an issue regarding pocophone, and using a xbox 360 windows wired controller through a otg cable. It doesn't work, it starts flashing the light upon plugging in, but nothing else. The OTG cable is working as I tried plugging in a usb drive, and it works fine.
I was told I needed to either edit my existent kernel config, or install one that has "CONFIG_JOYSTICK_XPAD" enabled. How do I do that, and which kernel do I need?
I have my phone rooted with magisk via TWRP, and have LineageOS 17.1 installed.
Ty in advance.
I had been using global stable MIUI ROM until 12.0.3.
I planned to switch to Awaken os 2.4 aurora. Smoothness of ROM and experience is still very good
Just curious to know is this an bug or some issue in the rom. I am not able to connect OTG. I thought I had bad OTG then I went to shop and bought and checked OTG with working pendrive after couple of tries it just shows of charging or something notification.
I came to home and started testing with mouse pendrive nothing appeared or detected.