Related
So I was on MIUI 7 with unlocked bootloader, custom recovery (twrp) and rooted. I wanted to try MIUI 8 so I downloaded the zip version from MIUI website and moved it to my phone then I go to custom recovery. I flashed the rom and before the flashing completed there was a red line of error code saying
'cannot mount /factory'
I thought that kind of error can be ignored but I guess I was wrong and now my phone stuck in MI logo.
I can still go to fastboot,
I can go to recovery,
I don't know how can i go to EDL to reflash with miflash,
when I tried going into fastboot and using adb, no devices detected.
Is this the end of my redmi note 3 life or is there a way ? Please, any help is greatly appreciated.
n.b :
It's redmi note 3 snapdragon version.
dokiace said:
So I was on MIUI 7 with unlocked bootloader, custom recovery (twrp) and rooted. I wanted to try MIUI 8 so I downloaded the zip version from MIUI website and moved it to my phone then I go to custom recovery. I flashed the rom and before the flashing completed there was a red line of error code saying
'cannot mount /factory'
I thought that kind of error can be ignored but I guess I was wrong and now my phone stuck in MI logo.
I can still go to fastboot,
I can go to recovery,
I don't know how can i go to EDL to reflash with miflash,
when I tried going into fastboot and using adb, no devices detected.
Is this the end of my redmi note 3 life or is there a way ? Please, any help is greatly appreciated.
n.b :
It's redmi note 3 snapdragon version.
Click to expand...
Click to collapse
here is the solution :- http://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
p.s : also check your driver installed correctly.
zooreo said:
here is the solution :- http://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
p.s : also check your driver installed correctly.
Click to expand...
Click to collapse
Exactly. Sound like your drivers aren't installed correctly. After that you should be able to flash the phone.
Sent from Note 3, Xiaomi Redmi Note 3.
zooreo said:
here is the solution :- http://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
p.s : also check your driver installed correctly.
Click to expand...
Click to collapse
mr.loverlover said:
Exactly. Sound like your drivers aren't installed correctly. After that you should be able to flash the phone.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
That is very awesome! I just finished reflashing back to global stable with mi flash, thank you very much!
So the problems are on my driver? not on the twrp source file or maybe the modded boot img ? because I thought that I forgot to modify the boot.img before flashing twrp
hey guys,
while flashing a rom using mi flash tool it failed with an error "insufficient storage to execute this command"
because i was unaware of the fact that to use mi flash tool i have to use 64-bit OS
as this flaw was out of my mind i used -w command in fastboot,as i understood by the error statement,but it didn't work cause i was using 32-bit os
but after getting aware of the very fact i used 64-bit OS and the process succeeded
Now the phone is booting properly but my my sim cards are not working :crying:
but i afterward noticed that IMEI no. was unknown:silly:
so please help me in getting out of this embarrassing situation.
Thanks.
https://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789
hope this helps!
i faced the same problem and tried everything and nothing worked so i flashed latest official global stable rom 8.1.1.1 mhomidi from miflash tool via edl mode and unbricked my device. my baseband and imei all came back fine.
If u have an efs backup then restore it! It should get back ur imei and sim related stuff!
error
khajiit said:
https://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789
hope this helps!
Click to expand...
Click to collapse
i tried it but twrp stated this error
unable to find efs partition
try this, i personal test it and work perfect for me,
https://goo.gl/w3wfpp
Confusion
What is fastboot file of a ROM
Is it flashed in edl mode or fastboot mode
You might have flashed kenzo firmware to kate device.
I cannot find miui 8.1.1.1
I find 8.1.1.0 and I flashed it but it doesn't work
Can you share the link of miui 8.1.1.1 for Redmi note 3 kenzo
Kartik Nahta said:
I cannot find miui 8.1.1.1
I find 8.1.1.0 and I flashed it but it doesn't work
Can you share the link of miui 8.1.1.1 for Redmi note 3 kenzo
Click to expand...
Click to collapse
It's 8.1.1.0 indeed. Sry I miss typed it but my phone recovered with that. My baseband and imei was lost and I flashed global image and it all came back.
Sent from my Redmi Note 3 using XDA-Developers Legacy app
Noting is working. I am only getting failure.
The last option I have is to go to service centre.
install this app from playstore and manually add your both imei no. app name is Chamelephon
Guys I've been facing a severe problem in my redmi note 4 sd . The problem is that all the sensors of my mobile are not working like(auto rotation,compass,magnetic sensor,hall sensor...etc)
The story behind this is that I've flashed color os rom(it didn't even booted for me) and after coming back to miui I'm facing this problem.
I've clean flashed a ton times but the sensors are not working....
Please help me friends...
m.shyamsundar37 said:
Guys I've been facing a severe problem in my resume note 4 sd . The problem is that all the sensors of my mobile are not working like(auto rotation,compass,magnetic sensor,hall sensor...etc)
The story behind this is that I've flashed color os rom(it didn't even booted for me) and after coming back to miui I'm facing this problem.
I've clean flashed a ton times but the sensors are not working....
Please help me friends...
Click to expand...
Click to collapse
Do a fastboot flash ..
You should post it in the proper section.
https://forum.xda-developers.com/redmi-note-4/help
I've flashed via fast boot but still im facing the problem
I had this problem for my 'redmi note 3' before. I flashed 'persist.img' through fastboot. Note: that is for redmi note THREE.
m.shyamsundar37 said:
I've flashed via fast boot but still im facing the problem
Click to expand...
Click to collapse
arunak said:
I had this problem for my 'redmi note 3' before. I flashed 'persist.img' through fastboot. Note: that is for redmi note THREE.
Click to expand...
Click to collapse
Help him find the persist.img ,.. Also did you extract that img from fastboot ROM ?
arunak said:
I had this problem for my 'redmi note 3' before. I flashed 'persist.img' through fastboot. Note: that is for redmi note THREE.
Click to expand...
Click to collapse
Is your problem solved now??
m.shyamsundar37 said:
Guys I've been facing a severe problem in my redmi note 4 sd . The problem is that all the sensors of my mobile are not working like(auto rotation,compass,magnetic sensor,hall sensor...etc)
The story behind this is that I've flashed color os rom(it didn't even booted for me) and after coming back to miui I'm facing this problem.
I've clean flashed a ton times but the sensors are not working....
Please help me friends...
Click to expand...
Click to collapse
friend, flash this zip and you will solve the problem of sensors, but I recommend you first do a deep cleaning, then flash this file and then the rom you want
m.shyamsundar37 said:
Is your problem solved now??
Click to expand...
Click to collapse
Yes
Edinsonpol said:
friend, flash this zip and you will solve the problem of sensors, but I recommend you first do a deep cleaning, then flash this file and then the rom you want
Click to expand...
Click to collapse
I'll try it bro and report u
Edinsonpol said:
friend, flash this zip and you will solve the problem of sensors, but I recommend you first do a deep cleaning, then flash this file and then the rom you want
Click to expand...
Click to collapse
Still not sliced...bro thanks for your help
m.shyamsundar37 said:
I'll try it bro and report u
Click to expand...
Click to collapse
Still not solved bro thanks for your help.....
Waiting for a perfect solution....
I've had this sensors problem in my redmi note 4 device, i flashed the fix & it solved all but created a new problem, i can't go back to stock rom.
The "persist.img" file in this fix belongs to someone else RN4 phone. Now I'm stuck with his mi account in my device. It needs his password to unlock. Ur only option is to use custom roms
You can find the persist.img file inside the fastboot zip from here.
It isn't flashed by default with Mi Flash but it's there.
BubuXP said:
You can find the persist.img file inside the fastboot zip from here.
It isn't flashed by default with Mi Flash but it's there.
Click to expand...
Click to collapse
Persist.img file comes with fastboot zip is around 5mb, but actual file size is more than 32mb, i flashed manually the smaller one and phone doesn't boot, keeps restarting in boot logo. I had to flash this sensor fix again to unbrick.
Ondipuli said:
I've had this sensors problem in my redmi note 4 device, i flashed the fix & it solved all but created a new problem, i can't go back to stock rom.
The "persist.img" file in this fix belongs to someone else RN4 phone. Now I'm stuck with his mi account in my device. It needs his password to unlock. Ur only option is to use custom roms
Click to expand...
Click to collapse
OK bro thanks and what if I flash the persist.IMG from the fastboot rom and not from some others mobile??
Persist.img file in fastboot rom is low in size, below 5mb, if you flash it, you get bootloop. Actual size around 32mb. U can see it in the fix file.
The partition on the phone is 32 MB. If the persist.img file is only 5 MB it could mean that the data inside the partition is only 5 MB, it doesn't have to be 32 MB.
Take the recovery partition for example, it's bigger than the size of the TWRP .img file, but it doesn't mean that TWRP file is corrupted.
However, to flash persist partition you need the unlocked bootloader and a modified fastboot.exe version that can restart the phone in EDL mode, and from there you can flash every partition with MiFlash.
Of course, data size of Persist.img partition maybe only 5mb, but after flashing the that comes with fastboot rom, all i got is an infinite bootloop. Even miflash doesn't flash this partition, I've seen it in miflash log file.
I tried to flash the persist image, but it simply refuse to do it, even with MiFlash (you can enable the flashing of persist.img by modifying the .bat file that MiFlash will use to flash).
As I write on my post above, to flash persist.img you need to be in EDL mode, but I didn't tried it personally, so I don't know if it will cause bootloop even this way (but I read of people resolving problems this way, so I don't think it will do harm).
Okay, I have been looking everywhere... Is Official TWRP out for Note 9 yet? I dont want to install unofficial ROM, and compiling my own version is too much time. If its out, can someone throw me with a link? If not, what do you think, when will they upload it?
Thanks for you answers.
https://twrp.me/Devices/
zerodeaths000 said:
Okay, I have been looking everywhere... Is Official TWRP out for Note 9 yet? I dont want to install unofficial ROM, and compiling my own version is too much time. If its out, can someone throw me with a link? If not, what do you think, when will they upload it?
Thanks for you answers.
Click to expand...
Click to collapse
No, no official TWRP out there, yet. I don't know for the RN9 (merlin), but for the RN9s/Pro India (curtana) there are LR TWRP, LOS recovery and PBRP out. For the RN9Pro global (joyeuse) and RN9ProMAX(excalibur) only PBRP.
Don't flash a recovery for curtana on a joyeuse or an excalibur! It could hardbrick the phone and only a service centre or a MI account with special rights to flash in EDL mode (which Xiaomi doesn't give out anymore) would be able to fix that!
There are already many ROMs for the curtana out there, but for the others only a few.
For the RN9(merlin) is a sperate forum here on XDA.
Tried all sorts, none worked.
Until I found this.
https://www.cyanogenmods.org/twrp-recovery-redmi-note-9-pro/
Offered there for Redmi Note 9 Pro / 9s [curtana]
But also works on my Redmi Note 9 Pro Joyeuse.
Backup was created without an error message.
Restoring data also worked correctly.
All other versions had a problem with this and issued an error and the data was of course destroyed.
The misc.bin is important for the installation, which was not included in all other versions
Ps:
Point 8 does not work there,
fastboot oem reboot-recovery
fastboot does not know this command.
Then just by
fastboot reboot
reboot and quickly via buttons
Power + volume up
boot into recovery mode
Thanks!
tinaeire said:
No, no official TWRP out there, yet. I don't know for the RN9 (merlin), but for the RN9s/Pro India (curtana) there are LR TWRP, LOS recovery and PBRP out. For the RN9Pro global (joyeuse) and RN9ProMAX(excalibur) only PBRP.
Don't flash a recovery for curtana on a joyeuse or an excalibur! It could hardbrick the phone and only a service centre or a MI account with special rights to flash in EDL mode (which Xiaomi doesn't give out anymore) would be able to fix that!
There are already many ROMs for the curtana out there, but for the others only a few.
For the RN9(merlin) is a sperate forum here on XDA.
Click to expand...
Click to collapse
Thanks for reminding, I didn't even know I had a joyeuse device, with QJZEUXM rom. I wanted to flash curtana... You saved me
nostra_DE said:
Tried all sorts, none worked.
Until I found this.
https://www.cyanogenmods.org/twrp-recovery-redmi-note-9-pro/
Offered there for Redmi Note 9 Pro / 9s [curtana]
But also works on my Redmi Note 9 Pro Joyeuse.
Backup was created without an error message.
Restoring data also worked correctly.
All other versions had a problem with this and issued an error and the data was of course destroyed.
The misc.bin is important for the installation, which was not included in all other versions
Ps:
Point 8 does not work there,
fastboot oem reboot-recovery
fastboot does not know this command.
Then just by
fastboot reboot
reboot and quickly via buttons
Power + volume up
boot into recovery mode
Click to expand...
Click to collapse
What ROM does your device use?
@zerodeaths000
Redmi Note 9 Pro – EEA Stable ROM
V11.0.4.0.QJZEUXM
https://mirom.ezbox.idv.tw/en/phone/joyeuse/
If you actually have the ROM QJZEUXM, then your phone is a Redmi Note 9 Pro
Without Pro, it had to have the following ROM QJOEUXM
https://mirom.ezbox.idv.tw/en/phone/merlin/
So never overlook the Pro, Pro and not Pro differ.
nostra_DE said:
@zerodeaths000
Redmi Note 9 Pro – EEA Stable ROM
V11.0.4.0.QJZEUXM
https://mirom.ezbox.idv.tw/en/phone/joyeuse/
If you actually have the ROM QJZEUXM, then your phone is a Redmi Note 9 Pro
Without Pro, it had to have the following ROM QJOEUXM
https://mirom.ezbox.idv.tw/en/phone/merlin/
So never overlook the Pro, Pro and not Pro differ.
Click to expand...
Click to collapse
I have a PRO, bought in Hungary, and even looked up that I had that ROM in the settings! Thanks for your reply!
Also, one more question. That ROM that you have provided, In case anything goes wrong, how can I flash it back?(MIUI 11.0.4.0)
The best way is by fastboot, see my post # 6 here
https://forum.xda-developers.com/re...9-pro-dead-t4141055/post83194647#post83194647
https://mirom.ezbox.idv.tw/en/phone/joyeuse/
Fastboot
joyeuse_eea_global_images_V11.0.4.0.QJZEUXM_20200715.0000.00_10.0_eea_dcfb9c0b60.tgz
https://bigota.d.miui.com/V11.0.4.0...EUXM_20200715.0000.00_10.0_eea_dcfb9c0b60.tgz
nostra_DE said:
The best way is by fastboot, see my post # 6 here
https://forum.xda-developers.com/re...9-pro-dead-t4141055/post83194647#post83194647
https://mirom.ezbox.idv.tw/en/phone/joyeuse/
Fastboot
joyeuse_eea_global_images_V11.0.4.0.QJZEUXM_20200715.0000.00_10.0_eea_dcfb9c0b60.tgz
https://bigota.d.miui.com/V11.0.4.0...EUXM_20200715.0000.00_10.0_eea_dcfb9c0b60.tgz
Click to expand...
Click to collapse
Unfortunately, I cant get MiFlash tool to work(Doesn't install the drivers after a long waiting), so I'm going to have to do it in fastboot(command line). Also, I got the .zip version, but if required, I can get the tar file.
Please refresh the forum link I gave here again.
I accidentally wrote Power + Up for the fastboot mode instead of Power + down
Just seen and corrected.
---------------------------------
The * .zip are only for recovery or OTA flash.
For fastboot with flashtool you absolutely need the content from * .tgz
Winrar completely unpacks folders and files that you need for fastboot.
7-zip, however, still displays a * .tar archive, which could then be flashed with the fastboot command line. Not tried myself.
Ps: driver problem maybe an administrator problem?
Start setup as administrator.
Or a snake oil problem (third-party Antivir)?
nostra_DE said:
Please refresh the forum link I gave here again.
I accidentally wrote Power + Up for the fastboot mode instead of Power + down
Just seen and corrected.
---------------------------------
The * .zip are only for recovery or OTA flash.
For fastboot you absolutely need the content from * .tgz
Winrar completely unpacks folders and files that you need for fastboot.
7-zip, however, still displays a * .tar archive, which could then be flashed with the fastboot command line. Not tried myself.
Ps: driver problem maybe an administrator problem?
Start setup as administrator.
Or a snake oil problem (third-party Antivir)?
Click to expand...
Click to collapse
Got it. I can fix the driver issue for sure. I will try this method, with the cyanogenmod link you gave. I will notify you when its done, because I have 3 more days until I can unlock the bootloader. Hope I won't have to flash the firmware again, and that nothing goes wrong.
One more thing though
"The folder with the extracted files must be on the root of a partition, otherwise there are error messages"
Does this mean that the files found in the tar file have to be extracted directly to C:\ or any other partition?
Partition doesn't matter, it doesn't have to be C :
I get an error message in the not root, probably because the path name was too long.
Didn't investigate further, but copied it straight into the root.
Looks like.
Before that, the folder was on the desktop, which of course made the path name very long.
Maybe the long folder name would have been enough
joyeuse_eea_global_images_V11.0.4.0.QJZEUXM_20200715.0000.00_10.0_eea
shorten by renaming.
Hello, I'm having trouble restoring my Redmi note 9s to the stock firmware, basically I installed a custom rom but I want to revert back to stock since it has annoying problems and I'm fed up dealing with them.
I tried downloading a stock firmware and installing it with official Xiaomi tools but I just can't install them for my life, even got a bootloop, thought bricked the phone and that scared me lol. (it failed to install the stock firmware halfway)
My problem relies on the official tool not working and the drivers not working, the tool detected my phone after troubleshooting for like 4 hours searching a driver and trying all the Xiaomi flash tool versions I found, but it just won't install the official firmware, always giving some error.
If anyone here is kind enough to maybe direct me to a guide that works or just tell me what worked for them that would be appreciated, I just want to finally install Global firmware on my phone.
Thanks!
Check here that everything is correct.
Post the Miflash log, miflash log file.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
If it's showing timeout error you may try miflash 2018 version. If it bootloop after flashing try miui 14 stock rom.
NOSS8 said:
Check here that everything is correct.
Post the Miflash log, miflash log file.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Okay, just so you know, I installed a miui custom rom from here and have been running that since, so I will need to back up my phone, install miflash and try to finally get back into the stock rom.
When I'm done with that I'll try installing the stock firmware and post it to you
Muhammad Juman said:
If it's showing timeout error you may try miflash 2018 version. If it bootloop after flashing try miui 14 stock rom.
Click to expand...
Click to collapse
The last time I tried it was the miui 13 but it was not a timeout error, it was weird, I think it detected my phone and all that but when it started installing, it gave out an error when it was maybe half way and hung, luckily I have a custom recovery so I realized I didn't brick it and just installed a custom miui 13 rom from here
Btw I'm not sure if there's miui 14 for the redmi 9s (thats a official stock firmware), all the sites I get to are sketchy lmao
dekannomad said:
dekannomad said:
The last time I tried it was the miui 13 but it was not a timeout error, it was weird, I think it detected my phone and all that but when it started installing, it gave out an error when it was maybe half way and hung, luckily I have a custom recovery so I realized I didn't brick it and just installed a custom miui 13 rom from here
Btw I'm not sure if there's miui 14 for the redmi 9s (thats a official stock firmware), all the sites I get to are sketchy lmao
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Try batch flashing via fastboot. Paste adb and fastboot.exe in image folder then click on flash_all.bat
MIUI 14 is out for global I'm using it. I also faced bootloop while flashing from cusrom to stock. Then i flashed all miui 11 versions it was still bootloop then flashed MIUI 14 it booted. Currently I'm on MIUI 14 SJWMIXM
Muhammad Juman said:
Try batch flashing via fastboot. Paste adb and fastboot.exe in image folder then click on flash_all.bat
MIUI 14 is out for global I'm using it. I also faced bootloop while flashing from cusrom to stock. Then i flashed all miui 11 versions it was still bootloop then flashed MIUI 14 it booted. Currently I'm on MIUI 14 SJWMIXM
Click to expand...
Click to collapse
Could you explain more how to batch flash or link a guide please? I know how to follow guides and all that but I don't know what batch flashing is
dekannomad said:
Could you explain more how to batch flash or link a guide please? I know how to follow guides and all that but I don't know what batch flashing is
Click to expand...
Click to collapse
Here is guide
NOSS8 said:
Check here that everything is correct.
Post the Miflash log, miflash log file.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
So I was following what the guide said and when I click drivers it just crashes and leaves this log, I read it but it doesn't seem that helpful lol
dekannomad said:
So I was following what the guide said and when I click drivers it just crashes and leaves this log, I read it but it doesn't seem that helpful lol
Click to expand...
Click to collapse
Try that:
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
NOSS8 said:
Try that:
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
So I did that but it opened a cmd and closed really fast, I don't think it did anything at all to be honest, Im going to reboot see what happened
dekannomad said:
So I did that but it opened a cmd and closed really fast, I don't think it did anything at all to be honest, Im going to reboot see what happened
Click to expand...
Click to collapse
What OS are you using?
NOSS8 said:
Try that:
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Damn it says the system has been destroyed, so now Im back to the situation I was in, I only have my custom recovery and fastboot
NOSS8 said:
What OS are you using?
Click to expand...
Click to collapse
Win 10, a few updates missing but basically up to date.
If my pc is the problem I have a laptop, which I never connect my phone to, that I can try on. It's on win 10 too but I haven't updated in a while since I don't use it often
Device manager/view/show hidden devices.
Do you have this?
NOSS8 said:
Device manager/view/show hidden devices.
Do you have this?
View attachment 5901529View attachment 5901531
Click to expand...
Click to collapse
This is what I have, I'm even using the original cable that my phone came with, which is brand new since I don't use it to charge it in everyday use.
One is unplugged, one is with it in fastboot mode
On this image, you have selected show hidden devices?
NOSS8 said:
On this image, you have selected show hidden devices?
Click to expand...
Click to collapse
Yes
Download and install ADB driver
Xiaomi Redmi Note 9S USB Driver for Windows
Download the latest Xiaomi Redmi Note 9S Driver for Windows Computer. You can use the latest Xiaomi Driver to connect the Xiaomi Device to the Computer.
xiaomidriver.com
NOSS8 said:
Download and install ADB driver
Xiaomi Redmi Note 9S USB Driver for Windows
Download the latest Xiaomi Redmi Note 9S Driver for Windows Computer. You can use the latest Xiaomi Driver to connect the Xiaomi Device to the Computer.
xiaomidriver.com
Click to expand...
Click to collapse
Okay I did that, I'm going to restart my pc. I should have known I was missing something. Should I try to install the firmware again?