I tried to put TWRP on my Nabi 2 using NabiLab and it worked, so I wanted to restore it to OEM recovery to see if that works too. When I went to the recovery screen it did this.
[IMG="Nabi 2 not reading any files"]https://I.postimg.cc/8zHNwWz0/image.jpg]
I tried reflashing TWRP and then putting the stock recovery back on, but I got the same result Could someone help me?
Also, the Nabi will boot and work fine, I just need to be able to use the “apply update from external storage” on the stock recovery, and the backup feature on the TWRP recovery. If someone could point me to a TWRP link for the Nabi 2 that works, that would also be helpful. I can use Fastboot. I can flash images using Fastboot. The only thing that keeps me from going back to the Ice Cream Sandwich ROM or the Jellybean ROM is that Fastboot tells me that the file is too large.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried reflashing TWRP and then putting the stock recovery back on, but I got the same result Could someone help me?
Also, the Nabi will boot and work fine, I just need to be able to use the “apply update from external storage” on the stock recovery, and the backup feature on the TWRP recovery. If someone could point me to a TWRP link for the Nabi 2 that works, that would also be helpful. I can use Fastboot. I can flash images using Fastboot. The only thing that keeps me from going back to the Ice Cream Sandwich ROM or the Jellybean ROM is that Fastboot tells me that the file is too large.
Anyone?
MyCatCondo said:
Anyone?
Click to expand...
Click to collapse
Seems like you're trying to flash a Nabi SE recovery image on a Nabi 2, which I don't think will work. I'm not sure which one will pertain to your Nabi, but here is a collection of custom recoveries for Nabi 2 (https://forum.xda-developers.com/wiki/Fuhu_nabi_2#Custom_Recovery_.28TWRP_by_aicjofs.29).
Related
Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help would be great-full
Rueben_ said:
Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
Any help would be great-full
Click to expand...
Click to collapse
You soft-bricked your device. These icons is the forced download mode. It means that you need to flash something to get over it. (and do NEVER put something in the phone section. You should have flash it in the PDA section.
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Tacsi566 said:
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Click to expand...
Click to collapse
Thanks guys fixed it used one click unbrick which worked really well. Tried flashing a rom and a kernel and it did not work before hand. With the one click unbrick it has allowed me to enter download mode again.
One-Click unbrick info: http://www.traemcneely.com/2011/08/...phone-exclamation-point-computer-unbrick-fix/
I'm happy that you could fix it
Sent from my YP-G70 using XDA
hi i managed to update my tab to the latest firmware 4.0.4 . Previously it was already rooted and TWRP installed. I was thinking of rooting and backing up this build so from romtoolbox i boot into recovery mode (thinking that i will be seeing TWRP) But when boot i was shown the folllowing picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
since all of my buttons are not working (hence the reason installing TWRP ) i was ok fine lets reboot it via adb. therefore i run adb reboot and yet it still boots back to the same screen . Thinking i need to reverting all of the changes via odin i tried reboot download also does not work. reboot-bootloader also does not work. apprently i am stuck at this screen.
Right now i only have access to adb and is there any way i can recover from this?
many thanks again
I'm assuming you were running some kind of custom rom with TWRP as your recovery before going to stock ICS. Essentially, flashing stock ICS overwrote the old TWRP.
To fix it, flash in TWRP again (its somewhere in the development section) via Odin.
EDIT: If you can't access download mode... Try push the TWRP .tar file via ADB
Sent from my GT-P7510
Soryuu said:
I'm assuming you were running some kind of custom rom with TWRP as your recovery before going to stock ICS. Essentially, flashing stock ICS overwrote the old TWRP.
To fix it, flash in TWRP again (its somewhere in the development section) via Odin.
EDIT: If you can't access download mode... Try push the TWRP .tar file via ADB
Sent from my GT-P7510
Click to expand...
Click to collapse
the thing is i only root and installed twrp for the sake of backing up since my daughter loves to install application. I've read about pushing / Installing application but that would requires root right? this is my command console like
Right now is there a way to force it to boot into download because thats the only way i see i can fix it (without using physical buttons)
Again many thanks for replying.
Hello everyone.
I have problem with my OnePlus X. It's rooted and a week ago starts roll out new Oxygen 2.2. I get OTA update, but I can't install it. I understand, it's because of root, but I downloaded zip file and trying to install it via TWRP and it always say's FAIL. Even on FACTORY RESET. I read a lot of stuff but it's always the same. Flash custom recovery and install ROM via TWRP or CMW.
Can you help me?
Thanks
what are you flashing? the full ROM or the OTA? which TWRP are you using and what is the error message?
I was trying to flash OTA Oxygen 2.2 but it doens't work. So I tried full ROM (oxygen and Cyanogenmode) and it doesn't work too. I have TWRP v2.8.7.0 .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OTA can't work it's normal.
Full zip should but if not, you have to install Bluspark recovery.
twrp-2.8.7.0-onyx_f2fs_v12.img
Okey thanks a lot. I'll try it.
maxillam said:
Okey thanks a lot. I'll try it.
Click to expand...
Click to collapse
Just to be sure, You followed well the unlock bootloader / recovery install and root instructions? You didn't just do the oneclick root approach?
Not one click. Full root.
It' should work with the recovery I told you, as it worked with others....
I hope it will. Thanks a lot man.
Do one thing,
Flash blu spark recovery, Then choose the 2.1.3-X zip n in the next step "add zips" add 2.2 (latest one) patch which is about 40mb n flash both at once.. it will do it n u will b on Oos 2.2
YES! Got it. I downloaded full ROM 2.2 Oxygen and I did new recovery (blue spark) and it all works Thanks guys )
I was really dumb and wanted to unroot so i decided to flash a stock_recovery.img to my Huawei LYO-L01. When prompted where to i selected boot without looking it up first :crying: Now when i open my phone i get a black screen that says
Android system recovery <3e>
LYO-L21C479B102
Reboot system now
apply update from ADB etc. etc.
I can still boot into TWRP and have a folder with some recovery files from when i rooted my phone.
How can i get my phone back into a bootable state?
EDIT: I imagine i can just get a fresh boot img form extracting this update.app i see everyone taking about but i dont know where to get an update.app. Can someone point me towards a download?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nafekop said:
I was really dumb and wanted to unroot so i decided to flash a stock_recovery.img to my Huawei LYO-L01. When prompted where to i selected boot without looking it up first :crying: Now when i open my phone i get a black screen that says
Android system recovery <3e>
LYO-L21C479B102
Reboot system now
apply update from ADB etc. etc.
I can still boot into TWRP and have a folder with some recovery files from when i rooted my phone.
How can i get my phone back into a bootable state?
EDIT: I imagine i can just get a fresh boot img form extracting this update.app i see everyone taking about but i dont know where to get an update.app. Can someone point me towards a download?
Click to expand...
Click to collapse
Well if you can boot into Twrp you just soft bricked your device so that should be easy to fix.
What you can do is: Restore an Backup of Stock Rom if you have one.
Or restore stock rom via an update.app file made for your device. (Something like this: https://boycracked.com/2017/06/15/official-huawei-honor-5a-lyo-l01-stock-rom-firmware/ )
Next time root with Magisk, is much better, is systemless and you can hide root from other apps easily and has a lot of usefull features.
I hope this helped you.
If it did, the thanks button works well
I was really dumb and wanted to unroot so i decided to flash a stock_recovery.img to my Huawei LYO-L01. When prompted where to i selected boot without looking it up first :crying: Now when i open my phone i get a black screen that says
Android system recovery <3e>
LYO-L21C479B102
Reboot system now
apply update from ADB etc. etc.
I can still boot into TWRP and have a folder with some recovery files from when i rooted my phone.
How can i get my phone back into a bootable state?
I imagine i can just get a fresh boot img form extracting this update.app i see everyone taking about but i dont know where to get an update.app. Can someone point me towards a download?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nafekop said:
I was really dumb and wanted to unroot so i decided to flash a stock_recovery.img to my Huawei LYO-L01. When prompted where to i selected boot without looking it up first :crying: Now when i open my phone i get a black screen that says
Android system recovery <3e>
LYO-L21C479B102
Reboot system now
apply update from ADB etc. etc.
I can still boot into TWRP and have a folder with some recovery files from when i rooted my phone.
How can i get my phone back into a bootable state?
I imagine i can just get a fresh boot img form extracting this update.app i see everyone taking about but i dont know where to get an update.app. Can someone point me towards a download?
Click to expand...
Click to collapse
Its complicated
Sent from my KIW-L21 using Tapatalk
Al Fareed GSM said:
Its complicated
Sent from my KIW-L21 using Tapatalk
Click to expand...
Click to collapse
I'm kinda desperate to get my phone working agian so any help is appreciated
Can you tell me what makes this problem complicated?
On a side note, what is the intended use of stock_recovery.img and stock.img and where am I meant to flash them?
ok i now see i WAS meant to run "flash recovery stock_revovery.img" or something to that effectin the console but i guess i have bigger fish to fry right now
oh wait i had a backup PANIC AVERTED