in MIROOM my headphones stops working, while in regular MI ROM they starts working again, tested in same phone again and again by switching ROMs, any fix for this?
Related
Here is my issue. I have had the LG G4 since it came out and I use that for my music. But, now. I want to use my Note II (With CM 12-20150201) as my main source for music in my vehicle. I can't do that cause bluetooth doesn't want to connect properly. I'm able to connect once on my way to work, I then on my way from work try to connect it won't connect or it will connect and will play music for about 2 seconds and freeze up. So, in order for it to work again I have to restart the phone and it will work. I figured it was a CM issue and I tried to flash another rom but when I try to do that it won't flash so any other TW based rom. How could I recover from this issue and go back to a TW based rom?
Hye. Need someone expert on this. My device got problem on sounds. This happens when i plug in 3.5mm audio jack to my speaker. Suddenly my device reboot loop on mi logo. Flash RR custom rom and its booting but cannot call or play any sound from audio file or video. Already flash with miflash also no luck. Just reboot loop on mi logo. Battery consumption also going crazy. Less than 5 hours without doing anything. And fevice feel warm always.
Try going back to official miui
Already flash stock global rom using miFlash with no luck. Btw, thanks.
Did you make full backup of all partitions using alka twrp?
Hey,
so I recently got the P9000 and I am very happy with it in General. There is just one big Problem, I am very used to Cyanogenmod on all my devices so I tried installing it in this phone, everything worked fine except for the microphone and the Speaker, Calls go through but I cant talk neither hear anything. Everytime I Start the phone it also says AudioFX was shut down. I also Tried listening to music or any sound for that matter but nothing works. I then installed the Stock ROM and everything works like a charm so I can rule out a Hardware issue. But the Stock ROM is just not cutting it for me in terms oft usability and options and I would much rather switch back to CM. Tried it again yesterday, clean install and everything, Microphone and Speaker are not working.... Does anyone have any ideas how to fix this? Any help greatly appreciated.
Read the Thread
Felino41 said:
Hey,
so I recently got the P9000 and I am very happy with it in General. There is just one big Problem, I am very used to Cyanogenmod on all my devices so I tried installing it in this phone, everything worked fine except for the microphone and the Speaker, Calls go through but I cant talk neither hear anything. Everytime I Start the phone it also says AudioFX was shut down. I also Tried listening to music or any sound for that matter but nothing works. I then installed the Stock ROM and everything works like a charm so I can rule out a Hardware issue. But the Stock ROM is just not cutting it for me in terms oft usability and options and I would much rather switch back to CM. Tried it again yesterday, clean install and everything, Microphone and Speaker are not working.... Does anyone have any ideas how to fix this? Any help greatly appreciated.
Click to expand...
Click to collapse
Flash Final 3... this will work for you.
MaStErB_1984 said:
Flash Final 3... this will work for you.
Click to expand...
Click to collapse
First of all thank you for the tip, in the meantime I installed Android 7 beta to have a look at it. Is there any way to go back to Stock ROM on Android 6 so I can install CM13 Final Build 3? I have tried flashing Recovery and STOCK ROM via SP Flash but it won`t work. I click Download, connect the phone while pressing the Vol+ and it says Downloading, goes up to 100% but the red bar is still there, then nothing happens. Every Flash of Stock or CM Recovery I did before that worked just fine so I guess it has something to do with Android 7. If there is no way I guess I`ll stick with Android 7 for now but I´d rather switch to CM.
There is a way...it has to do with the Android...it changes the preloader and the boot partition. Take this file from deepflex: https://yadi.sk/d/40K4mWLauUddk and flash with sp-tools. Finally flash the TWRP-Recovery from Jonny with flashtools. At the end do a full wipe and install the cm13.1 (Final 3) and the opengaaps.
Got it to work, I used a slightly different approach but right now I am finally installing CM13 Final Build 3, lets see if it works out fine! Thanks again for your help :good::good:
Hello guys,
I am in big trouble after installing Android P DP4. After 1.5 to 2 days of using android P dp4 my earpeace, main speaker and fingerprint stopped working. So, I went back to Oreo AOSCP. same problem there.
So I decided to flash MIUI and flashed MIUI 10 developer version all partitions from fastboot. Same problem there. No Fingerprint, no both speakers.
Plus when I connect phone (MIUI) in PC, It says Pixel XL, Why it is showing Pixel XL after flashing all the partitions??
Now you will say it is hardware problem.
But,
Fingerprint worked when registering while setup in android P. but not working to unlock phone.
Main speaker working when call comes. but not working while playing music (both custom rom and MIUI)
In call earpeace not working anywhere. But I am sure it's software problem. (tried flashing in call fix from GSI thread)
Any solution?
Fix: Automatically fixed.
Hi there
Since I updated my MI A3 to Android 11 the microphone sometimes doesn't record voices !
( I reset and flashed my phone so many times but didn't solve )
Upppppp
If you flashed stock with miflash... Probably the problem is hardware. I have flashed many stock and custom a11 firmware. And my microphone work well. A question. When you reflashed stock rom... You have changed the active slot? All updates are installed on slot b. So if want to make a good clean istallation... In my opinion is better set active slot to a via fastboot before flash. Try this. Also you can try a custom stable rom with oss drivers. But is important to make a good installation. Or the software problems may not be solved
Recently after owning a new car that is my first using Bluetooth handsfree option, I discovered this issue.
It seems the mic got somehow "stuck" to the car when I leave it, as the phone's normal mic then is okay. Just when trying to use the phone's handsfree mic in a call oder video calling in signal or hangouts it doesnt work. Even recording videos using the camera app is fine, but any handsfree option for any communication does not work.
Restarting the device or restarting bluetooth does not work. Somehow the phone recovers after sometime. When, why and how I do not know.
It definitely breaks down again once reconnected to the car.
with other bt devices have same problem?
Sadly I don't have any other bt device that is handsfree mic capable, I just own a speaker that is connected every now and then - it was my first idea to recover it by connecting to another bt device (the said speaker), but it does not work. Of course, the speaker is not connected using the same bt variant, the icon in the phone's settings is different.
mmmm... for this issue, the solution are: try delete all bt connection. if dont work try install latest software update. if dont work the definitive solution is wipe data and make a new clean installation. i suggest do this via miflash
wetito said:
If you flashed stock with miflash... Probably the problem is hardware. I have flashed many stock and custom a11 firmware. And my microphone work well. A question. When you reflashed stock rom... You have changed the active slot? All updates are installed on slot b. So if want to make a good clean istallation... In my opinion is better set active slot to a via fastboot before flash. Try this. Also you can try a custom stable rom with oss drivers. But is important to make a good installation. Or the software problems may not be solved
Click to expand...
Click to collapse
is there a guide to do a good factory reset without unlock the bootloader?
boot into recovery and wipe data