Hello,
i'm facing a strange issue since 4.2.3 firmware (same with 4.2.4):
the workout report on the wtch is good (altitude is ok) but on amazfit app it begins at -20000m for 20/30 secondes then a drop to the good one after.
check my picture it is unreadable.
sometime the preview is good but if i click on + to get details i have the same begin at -20000m for 20s.
do you have the same?
i also noticed during a workout if the watch is unlocked i have an altitude (230m for ex) then when the screen locks i have another one (240m) then if i unlock the watch again it's back to 230m... there's always differences depending on the screen state
the report on the watch is good. Only in amazApp seems faulty (for Altitude) all other logs are OK but i can not decripte my workout altitude...
Do you have those bugs?
I have the same issue with the Amazfit app and the altitude with Stratos 3. I also own the Notify & Fitness app and there the altitude graph seems pretty accurate 100% of times.
I also notice the wrong value only happens sometimes and depending with the sport I did on my watch.
thanks for the reply.
What i've notice also is that in Ultra Mode there is no pbs
i've sent diag to the support they told me they give them to developpment team.
Hope they'll fix this in next FW /AmazfitApp.
I have the same issue. It is a bug on the Amazfit app graph. See attached the same workout synced to Amazfit/Stava/Endomondo/Stratos
gerard33 said:
I have the same issue with the Amazfit app and the altitude with Stratos 3. I also own the Notify & Fitness app and there the altitude graph seems pretty accurate 100% of times.
I also notice the wrong value only happens sometimes and depending with the sport I did on my watch.
Click to expand...
Click to collapse
kulaki0 said:
I have the same issue. It is a bug on the Amazfit app graph. See attached the same workout synced to Amazfit/Stava/Endomondo/Stratos
Click to expand...
Click to collapse
yeah but there's another bug: on your watch the elevation is begin at 16m up to 24m and ends at 2...
on strava/endomondo/amazapp the highest is 2m and lowest -17m ?????? and you begin at -5 m?
i have the exactly the same differences between wath the watch says and what is synched.... (anyway data of the watch are always good)
Big synchronization bug i think
Yes I didn't pay attention to the actual numbers. There is indeed a constant shift in the exported values. The height values from the watch look more correct as there is only one area below sea level in town and I didn't run there
Hi Guys,
I have exactly the same bug on my Stratos 3. I have been able to compare and :
> Datas shown on the watch during the activity are OK
> Datas shown on the watch report (after activity) are OK
> Datas on the Amazfit App are wrong : Elevation is different from the watch (usually lower than the reality, compared with a "level line map"), and I have the "-20000" problem on the graph
> Datas exported to Strava are wrong
I send almost everyday the reports to Amazfit using the app, I hope they will fix this very annoying issue !
I need to try in the Ultra Mode to be able to compare. However accuracy of the GPS will be much less (1 point per minute vs 1 point per second using normal mode)
Did someone tried on latest cn firmware? So many updates since my post but no for global fw for the moment
winni21 said:
Did someone tried on latest cn firmware? So many updates since my post but no for global fw for the moment
Click to expand...
Click to collapse
Hi Winni21,
I haven't tried, but I don't really know how to get the CN firmware. So far I'm on 4.2.4.0
Do you know how to get it ?
DamDamStratos3 said:
Hi Winni21,
I haven't tried, but I don't really know how to get the CN firmware. So far I'm on 4.2.4.0
Do you know how to get it ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/smartwatch/amazfit/paceficator-project-stratos-3-multi-t4033223
winni21 said:
https://forum.xda-developers.com/smartwatch/amazfit/paceficator-project-stratos-3-multi-t4033223
Click to expand...
Click to collapse
Thanks Winni21, however I haven't unlocked Bootloader on my watch, and I'm a bit afraid to do so regarding the warranty. Nevertheless, this ROM looks much more complete than the one we have !
Are you thinking about trying to install it ?
Same for me... That's why if someone could try and tell us...
After 2 months of silence here is what I received today:
Amazfit Support (Amazfit)
Mar 17, 23:44 PDT
Hello There ，
How is everything going?
We have already located the issue and we are working on it. Hopefully we can optimize it in the future update. Thanks for your patience and support.
Should you have any further questions, please contact us with opening a new ticket or just reply to this ticket and it will automatically reopen in our system. We are more than happy to help!
Cheers and have an excellent day!
Sincerely ,
Alice
It seems we're going to have a new global fw soon.
Got 4.2.5 yesterday but the bug is not fixed in this one.
winni21 said:
Got 4.2.5 yesterday but the bug is not fixed in this one.
Click to expand...
Click to collapse
Yes, the bug is still there as of now. Really annoying bug that exists for months.
Related
Q&A for [APP] Gliderun *ALPHA*
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [APP] Gliderun *ALPHA*. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Polar Loop test
tincore said:
Sports activity tracker
* ALPHA * state.
I'm looking forward for people to test and send suggestions.
Track your sports activities capturing
location
cadence
altitude
power
heart rate
speed
bearing
slope
etc...
Plot progress, lap time and other
Set targets and receive feedback while tracking your session
Works in landscape and portrait
Audio rithmic control.
Reproduce your music at modified tempo to match your cadence.
Enable metronome to help with cadence.
Download or import routes.
Routes export to GPX and KML
Google earth route export *Broken*
Check compass and GPS status
Integration of sensors and wearables
Heart rate and other BTLE sensors.
Miband
Ready to integrate more
Google fit integration
Hi Tincore,
awesome idea you had there, and I am willing to test your app.
Tomorrow evening I'll receive a Polar Loop.
Could you please add in the first post what version of Android one needs to have?
AND, if you need to be rooted for the app to be tested?
I have a GT-I9305 (Samsung galaxy S3 4g) with stock Samsung android 4.4.4
If the second answer is no, I am willing to get my older (though fully working) rooted Nexus One Android 2.3.7, hoping it will work
Best of luck.
Click to expand...
Click to collapse
Maruzziello said:
tincore said:
Sports activity tracker
Hi Tincore,
awesome idea you had there, and I am willing to test your app.
Tomorrow evening I'll receive a Polar Loop.
Could you please add in the first post what version of Android one needs to have?
AND, if you need to be rooted for the app to be tested?
I have a GT-I9305 (Samsung galaxy S3 4g) with stock Samsung android 4.4.4
If the second answer is no, I am willing to get my older (though fully working) rooted Nexus One Android 2.3.7, hoping it will work
Best of luck.
Click to expand...
Click to collapse
No root on this one.
About the Polar loop. If it uses the standard BT characteristics it can show the step count. The code is there but I have not tested it.
About other features I would probably need to reverse protocol for integration.
Click to expand...
Click to collapse
Crashes continually
After last update the application continually crashes and restarts. This can even lead to phone reboot. The one thing that helped is to delete application (this caused my phone to reboot). Android 4.3, MIUI 5.
This app made me register this account and buy a MiBand! Thanks for you work.
The Google Fit integration is amazing enough - but I was wondering if some integration - data import was possible from food logging apps like Myfitnesspal or others on the same tune.
Again, great job, I've already installed this on my phone.
Hi @tincore, JMo from Play Store and email here.
I'm on Mi Band firmware version 1.0.9.55 and I'm not aware of any problems but I'm not using all the features of the app yet. Happy to test for you if you want to tell me what to look for. You're welcome to email too if you prefer.
Never mind I got an answer.
Anyone explain what this means?
Sent from my MT2L03 using XDA Free mobile app
v150 fixed my crashing issue. Hope the same for you.
BlackRaven86 said:
After last update the application continually crashes and restarts. This can even lead to phone reboot. The one thing that helped is to delete application (this caused my phone to reboot). Android 4.3, MIUI 5.
Click to expand...
Click to collapse
Same here 4.3 but Huawei MT2L03 version of android.
Sent from my MT2L03 using XDA Free mobile app
Iguanadon said:
v150 fixed my crashing issue. Hope the same for you.
Same here 4.3 but Huawei MT2L03 version of android.
Sent from my MT2L03 using XDA Free mobile app
Click to expand...
Click to collapse
I wasnt subscribed to this thread!!
tincore said:
I wasnt subscribed to this thread!!
Click to expand...
Click to collapse
I bet you are now
And yes I get the could not add notification null every time when using back or home to close the app
*edit* fixed with v155
Sent from my MT2L03 using XDA Free mobile app
tincore said:
I wasnt subscribed to this thread!!
Click to expand...
Click to collapse
So, as of kind Admin note on http://forum.xda-developers.com/android/apps-games/app-gliderun-alpha-t3057985/page28#post61197566 I shall ask my questions according to Gliderun OPEN BETA _here_, in this thread (no matter the main thread is more active and I found much more solutions there), shan't I? Okay, my question is how the calorie expenditure calculation is done. According to my Tanita body composition scales, my BMR is about 1200-1250 calories, but Gliderun thinks differently and according to Gliderun, I burn ~1000 calories daily even being active. Discouraging. Demotivating.
vexierspiegel said:
So, as of kind Admin note on http://forum.xda-developers.com/android/apps-games/app-gliderun-alpha-t3057985/page28#post61197566 I shall ask my questions according to Gliderun OPEN BETA _here_, in this thread (no matter the main thread is more active and I found much more solutions there), shan't I? Okay, my question is how the calorie expenditure calculation is done. According to my Tanita body composition scales, my BMR is about 1200-1250 calories, but Gliderun thinks differently and according to Gliderun, I burn ~1000 calories daily even being active. Discouraging. Demotivating.
Click to expand...
Click to collapse
Calories estimation is just that an estimation. Makes no sense counting them with to the unit exactitude. Having said that 200 calories is two bananas.
For the record I use VO2 based formulas.
Hi,
Thanks for all the good work! I just have a question. I see that my step count gets updated only if I go to sensor/wear menu, select the miband 1s and then select refresh.
I mean it does not get updated by itself when I open the app or on time intervals, but only manually. Also the step count on the dashboard is a little different than in the sensor/wear menu. Is it normal behaviour or am I doing something wrong?
Thanks
Sent from my MI PAD using Tapatalk
geopapa said:
Hi,
Thanks for all the good work! I just have a question. I see that my step count gets updated only if I go to sensor/wear menu, select the miband 1s and then select refresh.
I mean it does not get updated by itself when I open the app or on time intervals, but only manually. Also the step count on the dashboard is a little different than in the sensor/wear menu. Is it normal behaviour or am I doing something wrong?
Thanks
Sent from my MI PAD using Tapatalk
Click to expand...
Click to collapse
It should update unless sensor tracking is disabled. In that case you would only get data if you synchronize.
It could also be that a band sensor is disabled and the one active is the one on the phone. You can see the active one on sensors screen.
tincore said:
It should update unless sensor tracking is disabled. In that case you would only get data if you synchronize.
It could also be that a band sensor is disabled and the one active is the one on the phone. You can see the active one on sensors screen.
Click to expand...
Click to collapse
I have only enabled the band pedometer and disabled the phone sensor to save battery. I now see that it actually updates but every now and then..
Sent from my MI PAD using Tapatalk
This is for the North American/English version of the Amazfit Pace.
I am expecting to receive the watch in the next two weeks and I am unsure if I should root/unlock bootloader and flash the 1.2.37 PACEfied ROM or entrust Huami into fixing all the kinks with their (hopefully) regular updates. This is assuming that updating to the latest version locks the bootloader irreversibly as I'm currently informed.
What benefits does PACEfied offer that aren't available to 1.3.3a at the moment?
Thanks in advance
updated GPS firmware, auto-pause on activities, Mi Home support, music control from your watch ( early beta stage ).
regarding your concern for the irreversible process of the unlock, you CAN unlock the watch, with the new bootloader.
x3malex said:
What benefits does PACEfied offer that aren't available to 1.3.3a at the moment?
Thanks in advance
Click to expand...
Click to collapse
Compare
McFlyH said:
Compare
Click to expand...
Click to collapse
Just to be clear (as it might not be so clear from that list): I do have strava with pacefied even though it's based on the chinese firmware.
English beta?
ClausG76 said:
English beta?
Click to expand...
Click to collapse
closed beta, inaccessible to the open public.
Ok thanks
McFlyH said:
Compare
Click to expand...
Click to collapse
Great comparison! GPS is important to me but aside from that everything else seems trivial. I'd be nice to have access to more watch faces though.
x3malex said:
Great comparison! GPS is important to me but aside from that everything else seems trivial. I'd be nice to have access to more watch faces though.
Click to expand...
Click to collapse
Proper music shuffle (and also resume where you left off) was the reason I switched. Hearing the same songs in the same "random" order every time was driving me crazy!
McFlyH said:
Compare
Click to expand...
Click to collapse
Comparison new versions
Comparison new versions
There is one more thing. Sync with Strava means you can only sync GPS activities. Sync with Mi Fit means that you get everything + export to Google Fit
lasic said:
There is one more thing. Sync with Strava means you can only sync GPS activities. Sync with Mi Fit means that you get everything + export to Google Fit
Click to expand...
Click to collapse
export to Google Fit not working as must
as per thread title, can you share your experience with the available distributions?
and please tell me if is working for you the altitude information
thanks
US firmware
Because of OTAs and works with English Amazfit app.
https://forum.xda-developers.com/smartwatch/amazfit/amazfit-pace-poll-rom-using-watch-t3768582
chuckiebronco said:
https://forum.xda-developers.com/smartwatch/amazfit/amazfit-pace-poll-rom-using-watch-t3768582
Click to expand...
Click to collapse
Pace != Stratos
MrLadoodle said:
US firmware
Because of OTAs and works with English Amazfit app.
Click to expand...
Click to collapse
The same for me: International. Because of OTAs and Strava. Originally watch was Chinese version A1609, but now it's A1619
Quinny899 said:
Pace != Stratos
Click to expand...
Click to collapse
Yeah, my Bad.
We need sub categories!!!
MrLadoodle said:
US firmware
Because of OTAs and works with English Amazfit app.
Click to expand...
Click to collapse
US firmware sounds the most voted but the altitude not working make it unusable.
$ilvano said:
US firmware sounds the most voted but the altitude not working make it unusable.
Click to expand...
Click to collapse
Did you try restarting the watch before recording an activity? Pace has a problem where the altitude gets "stuck" after an activity, restarting the watch fixes it. Or disable/enable 3D data on Stratos, it may help too.
$ilvano said:
US firmware sounds the most voted but the altitude not working make it unusable.
Click to expand...
Click to collapse
For me the altitude problem still exists in latest stratosfied version.
Stratosfied. I have problem using US Stock in my Stratos 2S.
9benji9 said:
For me the altitude problem still exists in latest stratosfied version.
Click to expand...
Click to collapse
i guess because it's properly translated, with stratosfied at least i had some issues with the translation but i'll get back to stratosfied as soon as it's getting a new release.
endrancer said:
i guess because it's properly translated, with stratosfied at least i had some issues with the translation but i'll get back to stratosfied as soon as it's getting a new release.
Click to expand...
Click to collapse
I made a test today with the compass app where you can see the altitude. It takes long to get a GPS signal and the altitude was jumping +- 50m. I thought maybe it is because it does not have up to date agps information. I read somewhere to sync them via the app update but I was not able to sync them. Maybe that is the problem. A friend of mine has an iPhone (me MI6) with the stratos where the altitude works flawlessly.
Thought the update today would be a fix.
But unfortunately, a big NO.
It still doesn't retain the heart rate data after "HR continuous" mode is being disabled on the watch.
This means there's no problem in communication between watch and app, but just the app's HR data doesn't get synchronized with Amazfit account!
Still a piece of ****.
hkwildboy said:
Thought the update today would be a fix.
But unfortunately, a big NO.
It still doesn't retain the heart rate data after "HR continuous" mode is being disabled on the watch.
This means there's no problem in communication between watch and app, but just the app's HR data doesn't get synchronized with Amazfit account!
Still a piece of ****.
Click to expand...
Click to collapse
Did ROM update for Verge watch released too?
https://forum.xda-developers.com/smartwatch/amazfit/update-verge-t3955669 check here
I agree.
'till now, Verge has been a waste of money for me. I'm almost back to mi band 3.
hkwildboy said:
Thought the update today would be a fix.
But unfortunately, a big NO.
It still doesn't retain the heart rate data after "HR continuous" mode is being disabled on the watch.
This means there's no problem in communication between watch and app, but just the app's HR data doesn't get synchronized with Amazfit account!
Still a piece of ****.
Click to expand...
Click to collapse
MoronsHater said:
Did ROM update for Verge watch released too?
Click to expand...
Click to collapse
Not sure, i saw they have a new Chinese ROM release (v 3.0.40.0) for PACE on July 31, 2019
https://bbs.huami.com/thread-28009-1-1.html
A new Chinese ROM release (v 1.0.5.0) for Stratos on July 25, 2019
https://bbs.huami.com/thread-27955-1-1.html
Not sure if or when the international version will come through.
Only the average values, like the "resting" value, isn't shown once you disable continuous HR. You can either take a screenshot or use the profile to set your custom HR zones. Why would you want these values for anyway? The manual HR readings are not used to calculate the resting value, etc.
---------- Post added at 23:07 ---------- Previous post was at 23:06 ----------
hkwildboy said:
Not sure, i saw they have a new Chinese ROM release (v 3.0.40.0) for PACE on July 31, 2019
Click to expand...
Click to collapse
It is for Verge, not Pace.
---------- Post added at 23:14 ---------- Previous post was at 23:07 ----------
And you can always factory reset, uninstall Amazfit Watch app and downgrade (unless you are on iOS and don't have a backup copy of the app on iTunes)... Old versions available from APKMirror.com.
hkwildboy said:
Not sure, i saw they have a new Chinese ROM release (v 3.0.40.0) for PACE on July 31, 2019
A new Chinese ROM release (v 1.0.5.0) for Stratos on July 25, 2019
Not sure if or when the international version will come through.
Click to expand...
Click to collapse
I have another question. It's true that if release Amazfit app update in the same days must be new update for watch, for example Verge or these updates is not depends each other and can release in different time at all, I mean different months and ect? A little bit confused, because some updates for app and Verge was released in the same time almost.
Thanks. I hope will be this week or until August middle, I saw it's like tendency became at this moment, last updates was released in the same time or similar to it.
---------- Post added at 11:32 AM ---------- Previous post was at 11:22 AM ----------
lfom said:
It is for Verge, not Pace
Click to expand...
Click to collapse
How do you know that this is for Verge? For me update for Stratos sounds much more closer for Verge (last updates most time was added new faces), neither Pace for Verge?
lfom said:
Only the average values, like the "resting" value, isn't shown once you disable continuous HR. You can either take a screenshot or use the profile to set your custom HR zones. Why would you want these values for anyway?
Click to expand...
Click to collapse
1) Don't know if you are using Pace or other watch.
For Pace, once ontinuous HR is disabled, even the data that was showing properly on Amazfit app will disappear as well. This is the problem.
2) Of course these values are useful, it's the historical HR of the recorded period, which one could use for analysis. If such values are not important, why do they have continuous heart rate feature in the first place?
3) Yes, of course factory reset of the watch, and total un- and re-install of app were the first problem solving approach.
lfom said:
[/COLOR]
It is for Verge, not Pace.
Click to expand...
Click to collapse
Yes, you were right. The update is for Verge not for Pace.
I stand corrected. Thanks.~
MoronsHater said:
How do you know that this is for Verge? For me update for Stratos sounds much more closer for Verge (last updates most time was added new faces), neither Pace for Verge?
Click to expand...
Click to collapse
Amazfit智能手表 = Amazfit Verge
https://cn.amazfit.com/verge.html
AMAZFIT 智能运动手表 2 = Amazfit Stratos
https://cn.amazfit.com/watch-2.html
hkwildboy said:
Amazfit智能手表 = Amazfit Verge
https://cn.amazfit.com/verge.html
AMAZFIT 智能运动手表 2 = Amazfit Stratos
https://cn.amazfit.com/watch-2.html
Click to expand...
Click to collapse
Why these links is posted for/to me?
MoronsHater said:
Why these links is posted for/to me?
Click to expand...
Click to collapse
Didn't you ask "How do you know that this is for Verge? "
If i was mistaken i'm sorry.
hkwildboy said:
Didn't you ask "How do you know that this is for Verge? "
If i was mistaken i'm sorry.
Click to expand...
Click to collapse
Probably my question had to be: where did you found that this is for Verge (these updates)? I know how look Verge, I have one. But in posted links there is no any information for which models are updates, that's why I asked, I couldn't find in posted sources any traces about Pace, Verge or Stratos. But i'm not from China, Google translating sometime incorrect too
UPDATED: Already found answers into questions which I asked here:
1.0.5.0 update is for Amazfit Stratos 2s watch (weibo information)
3.0.40.0 update is for Amazfit Verge 2 watch (weibo information)
About new updates for Pace, Verge there is no information yet. I can't add any screenshot yet, so I can't show all information. But by descriptions and some photo in weibo information is correct.
Amazfit 3.3.0 is released today. Still no HR fix!
hkwildboy said:
Amazfit 3.3.0 is released today. Still no HR fix!
Click to expand...
Click to collapse
For my pace did fix it
hkwildboy said:
Amazfit 3.3.0 is released today. Still no HR fix!
Click to expand...
Click to collapse
With my stratos works! [emoji6]
Sometime I thinking that in forums must be filter from dumb people. Others creating threads with answers in questions, but somehow coming couple of users which again asking the same questions... I created after released for Verge update thread with small review, but looks like some of you are too blind to find it or too lazy to check, sorry for honest, I did not wanted to hurt or insult nobody, just sometime hard to understand why became threads and posts like yours if already was posted all information - https://forum.xda-developers.com/smartwatch/amazfit/update-verge-t3955669
---------- Post added at 01:05 PM ---------- Previous post was at 01:03 PM ----------
hkwildboy said:
Not sure, i saw they have a new Chinese ROM release (v 3.0.40.0) for PACE on July 31, 2019
https://bbs.huami.com/thread-28009-1-1.html
A new Chinese ROM release (v 1.0.5.0) for Stratos on July 25, 2019
https://bbs.huami.com/thread-27955-1-1.html
Not sure if or when the international version will come through.
Click to expand...
Click to collapse
https://forum.xda-developers.com/smartwatch/amazfit/update-verge-t3955669 check here
New app stopped syncing with my Stratos today. It was working fine and suddenly just stopped. Reboot, clear cache, etc. didn't help.
Sent from my CMR-W09 using Tapatalk
It's syncing again, unreliable piece of ****
Hello
I have a prob with my new watch : when i make sport footing for example, the GPS don't fix and i can't register footing session
Someone have the same prob.
Thanks
Philippe
Hi !
Prob solved by update apgs today
Philippe
running latest App version and latest international ROM. GPS fix seems slightly slower than my Pace, but worked fine every time.
GPS is really sucks.
Tacho: 9,42km
Runtastic: 9,3
GTR: 8,84km
Can not recommend this clock!
Hi,
I have amazfit gtr for 5 days. All updates are done. I was running twice (for 60 minutes together), but I did not have any GPS signal. I was running in Bratislava (capital of Slovakia).
Any idea, how to fix it ?
A-GPS updated?
Before running wait for fix. It can take more minutes first time.
I have no problem in Bratislava.
I can get a GPS fix but the tracking is terrible. Maps, at times, show me running on top of houses and not on the road where I actually am. I want to like the GTR but there are some bugs to work through. Hopefully they are aware and can fix these issues in a firmware update.
jsteelio said:
I can get a GPS fix but the tracking is terrible. Maps, at times, show me running on top of houses and not on the road where I actually am. I want to like the GTR but there are some bugs to work through. Hopefully they are aware and can fix these issues in a firmware update.
Click to expand...
Click to collapse
everyone has the same issue with the GPStracking: awfull how could they let it run like this??? i've sent a ticket to amazfit about this, everyoneone should do the same: [email protected] i hope the can push updates on this watch
dukynko said:
A-GPS updated?
Before running wait for fix. It can take more minutes first time.
I have no problem in Bratislava.
Click to expand...
Click to collapse
A-GPS has been updated wight after first start. (can I update it again ? how ?)
I waited for gps signal for several minutes and then: "GPS location failure. Please try again in open space" -> I was standing in open space.
Wulpo said:
A-GPS has been updated wight after first start. (can I update it again ? how ?)
I waited for gps signal for several minutes and then: "GPS location failure. Please try again in open space" -> I was standing in open space.
Click to expand...
Click to collapse
here is the support answer:
Hello There ，
Thank you for contacting Amazfit Customer Support. We apologize if the products caused you any inconvenience.
As for the GPS issue, our developer team has located the issue and are working on it. And we will release an update to optimize it soon. Hope you understand.
Should you have any further questions, please contact us with opening a new ticket or just reply to this ticket and it will automatically reopen in our system. We are more than happy to help!
Sincerely ,
Alice
Amazfit Support
winni21 said:
here is the support answer:
Hello There ，
Thank you for contacting Amazfit Customer Support. We apologize if the products caused you any inconvenience.
As for the GPS issue, our developer team has located the issue and are working on it. And we will release an update to optimize it soon. Hope you understand.
Should you have any further questions, please contact us with opening a new ticket or just reply to this ticket and it will automatically reopen in our system. We are more than happy to help!
Sincerely ,
Alice
Amazfit Support
Click to expand...
Click to collapse
That is great news! Good to hear they will be fixing it.
winni21 said:
here is the support answer:
Hello There ，
Thank you for contacting Amazfit Customer Support. We apologize if the products caused you any inconvenience.
As for the GPS issue, our developer team has located the issue and are working on it. And we will release an update to optimize it soon. Hope you understand.
Should you have any further questions, please contact us with opening a new ticket or just reply to this ticket and it will automatically reopen in our system. We are more than happy to help!
Sincerely ,
Alice
Amazfit Support
Click to expand...
Click to collapse
same problem - GPS took minutes not compareable to the amazfit pace => and on my way back 40 minutes 13km drive no GPS at all in Austria
I hope GTR have update choice option Always on Display
Neue Firmware 1.3.4.06
Ich habe am 27.08. das Update auf Version 1.3.4.06 erhalten, leider keine Verbesserung ? Habt Ihr immer noch die gleichen Erfahrungen mit der GPS Erkennung (heute morgen auf freier Fläche ohne Wolken kein Signal innerhalb von 15 Minuten)? Danke für die Rückmeldung.
winni21 said:
here is the support answer:
Hello There ，
Thank you for contacting Amazfit Customer Support. We apologize if the products caused you any inconvenience.
As for the GPS issue, our developer team has located the issue and are working on it. And we will release an update to optimize it soon. Hope you understand.
Should you have any further questions, please contact us with opening a new ticket or just reply to this ticket and it will automatically reopen in our system. We are more than happy to help!
Sincerely ,
Alice
Amazfit Support
Click to expand...
Click to collapse
Any news of the update?
I just got the GTR and have the same issue with inaccurate GPS data.
I also had the GPS fix problem, but reinstalling a previous firmware through notify and fitness app and then updating the watch through the amazefit app fixed this.
Is there any news about fixing the accuracy issues?
It looks like Spiderman rode my bike from building to building. Even in an open area the accuracy sucks
bazz79 said:
I just got the GTR and have the same issue with inaccurate GPS data.
I also had the GPS fix problem, but reinstalling a previous firmware through notify and fitness app and then updating the watch through the amazefit app fixed this.
Is there any news about fixing the accuracy issues?
It looks like Spiderman rode my bike from building to building. Even in an open area the accuracy sucks
Click to expand...
Click to collapse
Where did you find the previous firmware for gtr? Do you have any link for downloading?
Sent from my SGP621 using Tapatalk
You find the firmware through the "Notify & fitness for Amazfit" app
bazz79 said:
You find the firmware through the "Notify & fitness for Amazfit" app
Click to expand...
Click to collapse
You have right i find it. You can download and reinstall the previous version or only resources or only gps drivers through tis app. Thx
Sent from my LG-H870 using Tapatalk
manelolesa said:
Any news of the update?
Click to expand...
Click to collapse
here is what they've answered to me about timeline:
Hello There ，
Thank you for your reply .
It is most likely in Mid-late September. Thanks for your support and understand.
Should you have any further questions, please contact us with opening a new ticket or just reply to this ticket and it will automatically reopen in our system. We are more than happy to help!
Sincerely ,
Alice
Amazfit Support
I'm the only one who asked them about that?
Winni