Well I was undervolting and underclocking my i9100 for a few months and it would suffer from freezes and stuff like that nothing much as I would be able to perform a hard reset and reboot with my phone completely working everytime that happens. However today, I just locked my phone after taking a picture and I could not unlock it after that. I pressed the power button and home button but the screen would not turn on. So i just took out the battery and tried booting the phone. It was stuck in a bootloop where the boot animation would just keep on playing. So i force shutdown it and booted it into recovery. I had CWM 6.0.4.6 installed and when i booted into recovery, it gave me the message it cannot mount something and cannot load last kmsg and blah. I took no notice and tried to format cache. During this point, the recovery hanged and i force shutdown my phone again. After which, I could never turn on my phone again. No splash screen no nothing. I think it is bricked. And yea btw my usb port is not working anymore and it can only be used for charging. And i was running cm11 infected. Can you all please help me thanks!
so no recovery nor download mode?
Sadly, no
TheImpossibleEnemy said:
so no recovery nor download mode?
Click to expand...
Click to collapse
Yep i cannot even boot into anything no splash screen no nothing pressed the power button for like so long i even removed the battery for 2 hours and popped it back in not working
Try this - take out battery,then press and hold volume down+home+power and put battery back without releasing buttons.This may get you into a download mode where you can flash stock jb via odin.
Hello guys,
I've got a big problem with my I9300 and therefore I would like to ask here for any help. (If I'm in the wrong section, please move the thread to a correct one)
I had installed the Resurrection Remix ROM, v5.2.6. from 30.12.2014 and Googy-Max 2 recovery (CWM based) on my phone. I was using it for days and all worked fine.
One day I turned the phone off and I wanted to restart it. But it never restarted again; it ends up in a boot loop. It shows me the white Samsung Boot-Logo for some seconds, then a total black screen and the same thing repeats in a loop.
So I wanted to get into the recovery for wiping etc. but I couldn’t access the recovery. Nothing happens by pressing the relevant buttons. The device is still hanging in the boot loop. So I wanted to flash via Odin, but this isn't possible. I also can't go into the download mode. After pressing the relevant buttons, the green warning screen appears, which asks me if I really want to go to the download mode. But when I press volume up for "continue" or even if I don't press anything, the phone turns off and the boot loop with the white Samsung Logo starts again.
Therefore I ordered a USB JIG for forcing the device to go into download mode. When I plug the USB JIG in, the device actually goes into download mode but this status holds on only for a few seconds. After accessing download mode through the JIG, after a few seconds the phone turns off, restarts, (and because the JIG is still plugged in) the download mode appears again and it ends in a loop.
At first I thought maybe the power button is sticking and therefore the device turns on and off autonomous. But definitively I can negate it, because I opened the phone and removed the power button and nothing changed. Also by pressing the power button on the mainboard I can clearly hear the "click".
So I started a new attempt. Although the time, in which the device stays in download mode before turning off, is very short (only a few seconds), I tried flashing an other recovery, namely TWRP v2.8.3.0. So I prepared ODIN, plugged the JIG into the device, by appearing the download mode I switched cables and an other person clicked start at ODIN and it worked. So now TWRP is installed. Now I also can't get into recovery but after flashing TWRP there exist two little differences. First, after pressing the relevant buttons, TWRP appears for less than 1 second until the phone turns off. Secondly, when I plug the device in for charging, the Samsung charging logo appears for some seconds, then for less than 1 second appears a charging logo from Lollipop and the device ends up in a loop by displaying alternately the two different charging logos. Before flashing TWRP, the device booted in a boot loop (as I wrote above) by plugging it in for charging.
So the main question: how can I get my device work again
I tried telling you all details so that you have a better view of the problem.
Maybe I should flash a fully (stock) rom, but as I told you the download mode appears only for a few seconds. Flashing a recovery was possible, because the recovery file is very small - 7 MB. A full rom is much bigger and I think by flashing a complete rom, the device would turn off while Odin is flashing, therefore I ask first here for any assistance.
Thank you very much in advance!
beginnerteur said:
Hello guys,
I've got a big problem with my I9300 and therefore I would like to ask here for any help. (If I'm in the wrong section, please move the thread to a correct one)
I had installed the Resurrection Remix ROM, v5.2.6. from 30.12.2014 and Googy-Max 2 recovery (CWM based) on my phone. I was using it for days and all worked fine.
One day I turned the phone off and I wanted to restart it. But it never restarted again; it ends up in a boot loop. It shows me the white Samsung Boot-Logo for some seconds, then a total black screen and the same thing repeats in a loop.
So I wanted to get into the recovery for wiping etc. but I couldn’t access the recovery. Nothing happens by pressing the relevant buttons. The device is still hanging in the boot loop. So I wanted to flash via Odin, but this isn't possible. I also can't go into the download mode. After pressing the relevant buttons, the green warning screen appears, which asks me if I really want to go to the download mode. But when I press volume up for "continue" or even if I don't press anything, the phone turns off and the boot loop with the white Samsung Logo starts again.
Therefore I ordered a USB JIG for forcing the device to go into download mode. When I plug the USB JIG in, the device actually goes into download mode but this status holds on only for a few seconds. After accessing download mode through the JIG, after a few seconds the phone turns off, restarts, (and because the JIG is still plugged in) the download mode appears again and it ends in a loop.
At first I thought maybe the power button is sticking and therefore the device turns on and off autonomous. But definitively I can negate it, because I opened the phone and removed the power button and nothing changed. Also by pressing the power button on the mainboard I can clearly hear the "click".
So I started a new attempt. Although the time, in which the device stays in download mode before turning off, is very short (only a few seconds), I tried flashing an other recovery, namely TWRP v2.8.3.0. So I prepared ODIN, plugged the JIG into the device, by appearing the download mode I switched cables and an other person clicked start at ODIN and it worked. So now TWRP is installed. Now I also can't get into recovery but after flashing TWRP there exist two little differences. First, after pressing the relevant buttons, TWRP appears for less than 1 second until the phone turns off. Secondly, when I plug the device in for charging, the Samsung charging logo appears for some seconds, then for less than 1 second appears a charging logo from Lollipop and the device ends up in a loop by displaying alternately the two different charging logos. Before flashing TWRP, the device booted in a boot loop (as I wrote above) by plugging it in for charging.
So the main question: how can I get my device work again
I tried telling you all details so that you have a better view of the problem.
Maybe I should flash a fully (stock) rom, but as I told you the download mode appears only for a few seconds. Flashing a recovery was possible, because the recovery file is very small - 7 MB. A full rom is much bigger and I think by flashing a complete rom, the device would turn off while Odin is flashing, therefore I ask first here for any assistance.
Thank you very much in advance!
Click to expand...
Click to collapse
Check and make sure that your volume buttons and home button are not stuck also. If they are not, I would suggest a visit to a repair shop as your EMMC chip might be weak already.
beginnerteur said:
Hello guys,
I've got a big problem with my I9300 and therefore I would like to ask here for any help. (If I'm in the wrong section, please move the thread to a correct one)
I had installed the Resurrection Remix ROM, v5.2.6. from 30.12.2014 and Googy-Max 2 recovery (CWM based) on my phone. I was using it for days and all worked fine.
One day I turned the phone off and I wanted to restart it. But it never restarted again; it ends up in a boot loop. It shows me the white Samsung Boot-Logo for some seconds, then a total black screen and the same thing repeats in a loop.
So I wanted to get into the recovery for wiping etc. but I couldn’t access the recovery. Nothing happens by pressing the relevant buttons. The device is still hanging in the boot loop. So I wanted to flash via Odin, but this isn't possible. I also can't go into the download mode. After pressing the relevant buttons, the green warning screen appears, which asks me if I really want to go to the download mode. But when I press volume up for "continue" or even if I don't press anything, the phone turns off and the boot loop with the white Samsung Logo starts again.
Therefore I ordered a USB JIG for forcing the device to go into download mode. When I plug the USB JIG in, the device actually goes into download mode but this status holds on only for a few seconds. After accessing download mode through the JIG, after a few seconds the phone turns off, restarts, (and because the JIG is still plugged in) the download mode appears again and it ends in a loop.
At first I thought maybe the power button is sticking and therefore the device turns on and off autonomous. But definitively I can negate it, because I opened the phone and removed the power button and nothing changed. Also by pressing the power button on the mainboard I can clearly hear the "click".
So I started a new attempt. Although the time, in which the device stays in download mode before turning off, is very short (only a few seconds), I tried flashing an other recovery, namely TWRP v2.8.3.0. So I prepared ODIN, plugged the JIG into the device, by appearing the download mode I switched cables and an other person clicked start at ODIN and it worked. So now TWRP is installed. Now I also can't get into recovery but after flashing TWRP there exist two little differences. First, after pressing the relevant buttons, TWRP appears for less than 1 second until the phone turns off. Secondly, when I plug the device in for charging, the Samsung charging logo appears for some seconds, then for less than 1 second appears a charging logo from Lollipop and the device ends up in a loop by displaying alternately the two different charging logos. Before flashing TWRP, the device booted in a boot loop (as I wrote above) by plugging it in for charging.
So the main question: how can I get my device work again
I tried telling you all details so that you have a better view of the problem.
Maybe I should flash a fully (stock) rom, but as I told you the download mode appears only for a few seconds. Flashing a recovery was possible, because the recovery file is very small - 7 MB. A full rom is much bigger and I think by flashing a complete rom, the device would turn off while Odin is flashing, therefore I ask first here for any assistance.
Thank you very much in advance!
Click to expand...
Click to collapse
Your power button is failing, stuck in 'pressed' position. Try pressing repeatedly power button for several seconds, then release it completely. It shall bring it back to life. Visit your local service, or prepare tin, heat gun and soldering pistol. One button cost $0.2, they are selling them on eBay in sets of three (and 10, and 100....).
Happened to me some time ago, and video on youtube helped me to dismantle my phone, pull broken button out of it, and change it for new.
My phone was cycling like yours.
beginnerteur said:
Hello guys,
I've got a big problem with my I9300 and therefore I would like to ask here for any help. (If I'm in the wrong section, please move the thread to a correct one)
I had installed the Resurrection Remix ROM, v5.2.6. from 30.12.2014 and Googy-Max 2 recovery (CWM based) on my phone. I was using it for days and all worked fine.
One day I turned the phone off and I wanted to restart it. But it never restarted again; it ends up in a boot loop. It shows me the white Samsung Boot-Logo for some seconds, then a total black screen and the same thing repeats in a loop.
So I wanted to get into the recovery for wiping etc. but I couldn’t access the recovery. Nothing happens by pressing the relevant buttons. The device is still hanging in the boot loop. So I wanted to flash via Odin, but this isn't possible. I also can't go into the download mode. After pressing the relevant buttons, the green warning screen appears, which asks me if I really want to go to the download mode. But when I press volume up for "continue" or even if I don't press anything, the phone turns off and the boot loop with the white Samsung Logo starts again.
Therefore I ordered a USB JIG for forcing the device to go into download mode. When I plug the USB JIG in, the device actually goes into download mode but this status holds on only for a few seconds. After accessing download mode through the JIG, after a few seconds the phone turns off, restarts, (and because the JIG is still plugged in) the download mode appears again and it ends in a loop.
At first I thought maybe the power button is sticking and therefore the device turns on and off autonomous. But definitively I can negate it, because I opened the phone and removed the power button and nothing changed. Also by pressing the power button on the mainboard I can clearly hear the "click".
So I started a new attempt. Although the time, in which the device stays in download mode before turning off, is very short (only a few seconds), I tried flashing an other recovery, namely TWRP v2.8.3.0. So I prepared ODIN, plugged the JIG into the device, by appearing the download mode I switched cables and an other person clicked start at ODIN and it worked. So now TWRP is installed. Now I also can't get into recovery but after flashing TWRP there exist two little differences. First, after pressing the relevant buttons, TWRP appears for less than 1 second until the phone turns off. Secondly, when I plug the device in for charging, the Samsung charging logo appears for some seconds, then for less than 1 second appears a charging logo from Lollipop and the device ends up in a loop by displaying alternately the two different charging logos. Before flashing TWRP, the device booted in a boot loop (as I wrote above) by plugging it in for charging.
So the main question: how can I get my device work again
I tried telling you all details so that you have a better view of the problem.
Maybe I should flash a fully (stock) rom, but as I told you the download mode appears only for a few seconds. Flashing a recovery was possible, because the recovery file is very small - 7 MB. A full rom is much bigger and I think by flashing a complete rom, the device would turn off while Odin is flashing, therefore I ask first here for any assistance.
Thank you very much in advance!
Click to expand...
Click to collapse
As said your emmc chip maybe failing.
The dead boot thread maybe of interest to you.
Virnik0 said:
Your power button is failing, stuck in 'pressed' position. Try pressing repeatedly power button for several seconds, then release it completely. It shall bring it back to life. Visit your local service, or prepare tin, heat gun and soldering pistol. One button cost $0.2, they are selling them on eBay in sets of three (and 10, and 100....).
Happened to me some time ago, and video on youtube helped me to dismantle my phone, pull broken button out of it, and change it for new.
My phone was cycling like yours.
Click to expand...
Click to collapse
He said he has tested this and can also hear the micro-switch clicking.
scorpionhd2 said:
Check and make sure that your volume buttons and home button are not stuck also. If they are not, I would suggest a visit to a repair shop as your EMMC chip might be weak already.
Click to expand...
Click to collapse
Virnik0 said:
Your power button is failing, stuck in 'pressed' position. Try pressing repeatedly power button for several seconds, then release it completely. It shall bring it back to life. Visit your local service, or prepare tin, heat gun and soldering pistol. One button cost $0.2, they are selling them on eBay in sets of three (and 10, and 100....).
Happened to me some time ago, and video on youtube helped me to dismantle my phone, pull broken button out of it, and change it for new.
My phone was cycling like yours.
Click to expand...
Click to collapse
Darke5tShad0w said:
As said your emmc chip maybe failing.
The dead boot thread maybe of interest to you.
He said he has tested this and can also hear the micro-switch clicking.
Click to expand...
Click to collapse
Thank you very much for helping! :good:
So the question is, whether it's the power button's or emmc's fault...
I did a little searching and found this video. I've got exactly the same problem like the guy. At 1:06 following the boot loop, at 1:34 following the problem with downlod mode.
Although he thinks it's caused to the sudden death problem, but at least in my case I think it's wrong because months ago I did the eMMC Brickbug Check.
Also I noticed a probably important detail. When I put the battery in the phone, it automatically turns on without pressing the power button like in 1:04-1:09 in the video. Which normal working phone turns itself on by simply putting in the battery...?
So it must get a command for turning on - (possibly through a defect power button?)
@Virnik0, do you remember, if you could hear the micro-switch clicking on your phone before replacing the button on the mainboard?
beginnerteur said:
Also I noticed a probably important detail. When I put the battery in the phone, it automatically turns on without pressing the power button
Click to expand...
Click to collapse
Your power button is faulty, replace it before you try fixing anything else.
Thank you very, very much for helping! :good: :good: :good:
Truly the power button was fault although you could hear clearly the "click".
I unsoldered and removed the power module and (by startig with JIG and rebooting via ADB) the phone works as it should. :victory:
Now I'm trying to solder a new power button......it's a bit tricky
Again, thank you very much guys!
I had the same problem, pressed the button many times, and it helped. Thank you for your suggestions
Dear Sir/Mdm,
This is Linn Myanmar and I am from Myanmar, Stayed in Singapore, working as an engineer.
I just bought my phone (Elephone S8) one week before and I tired rooting with tutorials from XDA forum (using flash tool, driver).
Yes, the phone has been rooted properly as root checker said and I tried installing Updated SuperSU from setting>About Phone>System Update>Local Updates>Updated SuperSU.zip.
After that the phone has rebooting with logo and never show any result and the phone just happened the screen on and off repeatedly until now.
So that please help me how to solve this and get back to its normal operation. I've tried long pressing on power button, long pressing on power button+volume up button, long pressing on power button+volume up button+volume down button quite many time, but those doesn't work and the phone hasn't come back it's normal operation.
Help me please.
With Best Regards,
Linn Myanmar
Linn Myanmar said:
Dear Sir/Mdm,
This is Linn Myanmar and I am from Myanmar, Stayed in Singapore, working as an engineer.
I just bought my phone (Elephone S8) one week before and I tired rooting with tutorials from XDA forum (using flash tool, driver).
Yes, the phone has been rooted properly as root checker said and I tried installing Updated SuperSU from setting>About Phone>System Update>Local Updates>Updated SuperSU.zip.
After that the phone has rebooting with logo and never show any result and the phone just happened the screen on and off repeatedly until now.
So that please help me how to solve this and get back to its normal operation. I've tried long pressing on power button, long pressing on power button+volume up button, long pressing on power button+volume up button+volume down button quite many time, but those doesn't work and the phone hasn't come back it's normal operation.
Help me please.
With Best Regards,
Linn Myanmar
Click to expand...
Click to collapse
Hi Linn
How did you solve your problem?
Hi have exactly the same problem at this moment and, as you, I tried everything (except the hammer but it was close...)
Really need a solution for this!
I like the phone but this way I have to buy another one and other brand for sure...
Thanks (from Portugal)
I suppose you both solved this, one war or other, but maybe someone else looks for a solution to this.
As the S8 is a MTK-phone, it's never really "dead" until it's defective. You can always revive it. So stay cool.
All you need is a Windows-PC with working VCOM-drivers, the SP-Flash-Tool and a ROM. You can get all that on www.elephone.hk/downloads (at least until today... if it's no longer there, you need to google for all that).
The problem is to shut the phone off.
Of course you can just let it boot-loop until the battery is empty, if you can take the time.
Otherwise there's no simple and foolproof way to shut it off if it's in loop.
Try everything you can imagine with the three buttons. Especially pressing the power-button for "ages". Try pressing any volume-button simultaneously, too. I had my S8 bricked to bootloop several times yesterday and today, while fiddling around with all ROMs I could find.
Sooner or later I got the phone to shut off. I somehow got it into the testing-menu, too, which is yellow and chinese and which won't help you.
I even somehow managed to boot into recovery several times, which offers "shutdown"-option. I have the impression that the S8 enters recovery eventually when it fails to boot often enough, but that's just a guess.
Anyway, once the phone is off, you have won.
Start the SP-Flash-Tool, load the scatter-file from your desired ROM (which is probably 20171018), unplug the phone, press "download", and then plug the phone to USB. You might have to press vol+ oder vol- while plugging it in, but if it's recognized, the SP Flash Tool will start flashing the ROM and your phone is up and running again.
Problem solved
I think this is too complex anyway.
The battery was empty after some days.
It was too bad lose so many information but I had to live with that.
So, finally the hammer solve the problem in less then a second...
Thank you very much. Is nice to know there are people helping to solve some problems.
Amorinix
Please also find all required files for rooting the Elephone S8 at:
https://www.mediafire.com/file/k1ldc..._root.rar/file
I hope this helps.
To turn phone off, hold all 3 buttons for about 15 seconds the phone will look like it's powering down but then restart after about 2 seconds just KEEP holding all 3 buttons and it will power off properly. In other words hold all 3 buttons for about 45 secs to power down if in a boot loop. Once powered down hold volume down whilst plugging into USB to flash.
Hello,
New to the forum and all of this, so please go easy on me.
I have a Samsung Galaxy S9+ (SM-G960F).
On Thursday evening, I went to the device and it was completely dead. It wouldn't turn on and I attempted to do power key/volume down and various other button combinations I found online that would normally boot the device. Obviously, I attempted to charge the phone, but the charging light did not come on yet the phone did warm up slightly as if it was charging. After leaving it plugged in for so long, a 'Downloading... Do Not Turn Target Off' screen appeared. It also states I can restart the phone by holding volume down/power button for seven seconds. However, when I do this the phone just goes dead and doesn't boot up. After plugging in the charger again trying various buttons, I eventually end up back at the same download screen.
I've read about recovery mode, safe mode etc but I am unable to access them using the instructions I've read.
Any help would be appreciated. Ideally I'd like to be able to access my photos/videos/messages on the device and be able to use it again.
Jamfocus said:
Hello,
New to the forum and all of this, so please go easy on me.
I have a Samsung Galaxy S9+ (SM-G960F).
On Thursday evening, I went to the device and it was completely dead. It wouldn't turn on and I attempted to do power key/volume down and various other button combinations I found online that would normally boot the device. Obviously, I attempted to charge the phone, but the charging light did not come on yet the phone did warm up slightly as if it was charging. After leaving it plugged in for so long, a 'Downloading... Do Not Turn Target Off' screen appeared. It also states I can restart the phone by holding volume down/power button for seven seconds. However, when I do this the phone just goes dead and doesn't boot up. After plugging in the charger again trying various buttons, I eventually end up back at the same download screen.
I've read about recovery mode, safe mode etc but I am unable to access them using the instructions I've read.
Any help would be appreciated. Ideally I'd like to be able to access my photos/videos/messages on the device and be able to use it again.
Click to expand...
Click to collapse
-Download odin
-Download firmware for your phone
-unrar firmware file
-open odin
-flash AP , BL , CP , HOME_CSC (HOME_CSC goes on USERDATA) if you haven t formated your phone by mistake your files will be there and your phone working.