Hello friends, I'm new here and i have troubles with the lenovo 6000h tablet. Its loading the lenovo screen and after that it shows the dead android with the red triangle. I got everything i need to flash it i load the scatter press download and when i connect the usb nothing happens. I have installed the drivers needed so i think the problem is that the micro usb dock is a bit loose, when charging it needed to be in specific position to get charged. What do you think is it possible this to be the problem? What are my options can i flash from sd card ? The mediatek driver also gives me the code 10 error but i have read that some people flash their devices despite that error. Any help would be appreciated!
Related
Hi everyone,
I tried flashing a new rom on my Goophone N3+ (i think it's a MTK6592), but something went terribly wrong and now the phone doesn't boot.
I can't even access the recovery mode or the download mode: the phone just won't turn on.
I tried connecting it to different computers with different cables, but it's always recognized as an "unknown device".
Is there a way to unbrick it, or at least make my pc recognize it?
Thank you in advance and sorry for my poor english.
Remove battery, plug phone on USB and check for COM port in device manager.
If there is a COM port for only 2 seconds, there is unbrick possible.
Hi all, I have a Lenovo P780 4GB that I flashed successfully with SPFT, P780_S125_130529 ROM from needrom.com. from there the phone will not boot but I can see is a red led charging light glowing while connecting it to a computer or charger. The device is not getting recognized by VCOM drivers so no use with flash tool any more. the only thing I see from Device manager is Alcatel Single RNDIS Interface #2. when I plug the phone to the computer I can hear the device connected/disconnected sound, Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to fix this problem?
Is there any other way I can get the device to change modes or rather a way to get it to be recognized by the PC?
a solution to fix the device will be the best.
Thanx for the help
my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Maervince015 said:
my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Click to expand...
Click to collapse
Hi!
I had the same issue 2 day before!
To fix it I was unable with windows,so I downloaded a spflashtool for linux. I started with sudo (root access) and made the same method with the windows version.Its worked for me! But wait one or two day,maybe somebody will know a solution with windows.
My Lenovo A7000 Does not turn on
While installing the official update marshmallow device switched of and then it does not turn on. If i put in charge then after sometime lenovo screen appears and the it shuts down again,. Cannot go to recovery mode also. The lenovo screen shows TOOL Dl image fail in the left bottom side.
How can i solve this problem Please someone help me:crying::crying::crying:
Hello friends
I have an asus k004 ME371MG, it happens that it no longer has the droid boot, there is no way to do the recory or hard reset by sd card in download mode, I already tried using AFT
when connecting the tablet to the charger or via usb the "welcome asus" screen appears on the screen and then a usb logo appears with a question mark. It happens that he only recognizes the usb as the name of medfieldXXXX, I use Windows 10 64 bits, I would like a specific help for my model, his software comes in RAW mode, very different from the others ... anyone can help me in this sense . thank you. I use it in Brazil ... I am a Dentist, but with advanced knowledge in computer science. I tried several tutorials here in the forum. if anyone has help how to help thanks!
Hello everyone;
I was trying to load a CM recovery file on my cell by using SP Flash tools and somehow bricked my Acer Z410 phone (carrier: Fido, 2 sim card slot) I do not know why afterwards, the cell turns white with a yellow strip down the middle. I have been able to have my computer recognize it after numerous attempts to flash firmware versions that I was not quite sure was the original. I had tried your site to load the firmware that seem to correlate to my cell configurations, but all of the links are dead. I ended up flashing with SP Flash tools firware version AVOKO 1.015, but it still can't boot in to see anything on cell. So as of today, I got my computer to recognize the phone and I can actually see the files on my phone and sd card inside. How can I boot into this puppy? I have tried within ABS and the command function to view adb devices, but it does not show up? I get an error : device 0123456789ABCDEF Unauthorized. In my device manager it shows up as ACER phone , and under the Ports section it does show Mediatek Preloader USB VCOM driver (COM 5). I hope I have given enough information to start diagnosing the problem.
Any suggestions how to go about this problem from here?
breezin123