Asus k004 me371mg without droidboot, no sistem... Nothing - Android Q&A, Help & Troubleshooting

Hello friends
I have an asus k004 ME371MG, it happens that it no longer has the droid boot, there is no way to do the recory or hard reset by sd card in download mode, I already tried using AFT
when connecting the tablet to the charger or via usb the "welcome asus" screen appears on the screen and then a usb logo appears with a question mark. It happens that he only recognizes the usb as the name of medfieldXXXX, I use Windows 10 64 bits, I would like a specific help for my model, his software comes in RAW mode, very different from the others ... anyone can help me in this sense . thank you. I use it in Brazil ... I am a Dentist, but with advanced knowledge in computer science. I tried several tutorials here in the forum. if anyone has help how to help thanks!

Related

[Q] Is this thing f**ked?

Firstly I apologise if this has been covered anywhere - I read a load of posts and did a load of searches but came up empty handed about this specific issue.
I bought a Galaxy Ace (GT-S5830 Baseband:S5830NEKA3 OS:2.2.1) as a dev device and it's been working fine up until today, and at some point it decided it doesn't want to be able to connect to my computers. I've tried three different computers, two different operating systems, and ever tried installing Kies (urk) with no luck.
The phone can charge over USB, saying that it's charging over AC, but that's all that happens.
I can't boot in to recovery mode as holding the power+middle button+vol up just gives me a ramdump message.
Can anyone help me out?
Martyn.h said:
Firstly I apologise if this has been covered anywhere - I read a load of posts and did a load of searches but came up empty handed about this specific issue.
I bought a Galaxy Ace (GT-S5830 Baseband:S5830NEKA3 OS:2.2.1) as a dev device and it's been working fine up until today, and at some point it decided it doesn't want to be able to connect to my computers. I've tried three different computers, two different operating systems, and ever tried installing Kies (urk) with no luck.
The phone can charge over USB, saying that it's charging over AC, but that's all that happens.
I can't boot in to recovery mode as holding the power+middle button+vol up just gives me a ramdump message.
Can anyone help me out?
Click to expand...
Click to collapse
When phone is turned off. Press and hold home+power/lock button untill it reaches recovery menu.
Check - that works. Thanks.
I'm now unsure as to how to proceed - neither adb devices nor fastboot devices are reporting anything back.
Connect device to pc. Open device manager (windows). Remove all drivers related to the ace and Samsung.
Remove the device and reboot the pc. Then connect the device. Windows update will detect the device and install the necessary drivers. If it doesn't automatically do that then open up device manager and install them manually by right clicking on the device and selecting update drivers from internet.
From the Galaxies to your Ace...!!
Thanks for your reply.
In windows there's no sign of any Samsung or Galaxy Ace drivers. Plugging it in to my Kubuntu machine gives me identical lsusb results as when not plugged in.
Have done a data wipe, checked that USB debugging is on and tried different cables
think it's screwed.
Think I could stick a ROM on the SD card and flash it? Would that work?
Martyn.h said:
Thanks for your reply.
In windows there's no sign of any Samsung or Galaxy Ace drivers. Plugging it in to my Kubuntu machine gives me identical lsusb results as when not plugged in.
Have done a data wipe, checked that USB debugging is on and tried different cables
think it's screwed.
Think I could stick a ROM on the SD card and flash it? Would that work?
Click to expand...
Click to collapse
hmm.. kies didnt work right? So i guess only option IMO would be card reader or CWM
Yep , the phone's USB port is frayed
This was sent from a Galaxy Ace. Problem?

HELP Bricked Tablet Ematic EXP8

Hi, I first want to say I am very thankful that you're reading this.
My problem is tablet ematic exp8 just suddenly got bricked .
When I hold power off + volume up or down button, the tablet turns on and doesnt offer me options and only goes to android logo again.
So I have downloaded ematic exp8 image file and usb drivers from their website. I followed some advice and tried to install those drivers but windows said that current version is up to date.
I tried to put image files on SD card but it didnt work.
I tried with LiveSuit but it didnt recognize my tablet.Althought he recognized IMG file.
I feel like usb driver might be the problem since USB debugging is turned off and in device manager Alcatel Andorid ADB interface is listed as driver.
If you have any suggestions please say so.

Bricked Goophone N3+

Hi everyone,
I tried flashing a new rom on my Goophone N3+ (i think it's a MTK6592), but something went terribly wrong and now the phone doesn't boot.
I can't even access the recovery mode or the download mode: the phone just won't turn on.
I tried connecting it to different computers with different cables, but it's always recognized as an "unknown device".
Is there a way to unbrick it, or at least make my pc recognize it?
Thank you in advance and sorry for my poor english.
Remove battery, plug phone on USB and check for COM port in device manager.
If there is a COM port for only 2 seconds, there is unbrick possible.

[Q] Problem with flashing Allwinner A13

Hey guys,
Recently I ordered the Allwinner A13 (Q88) from DealExtreme. I wanted to flash a custom ROM onto it, but following all the guides I still can't manage to get it. First of all, I noticed that the firmware it came is 4.2.2 Jelly Bean, as opposed to 4.1 as they had written on the site. Anyways, I managed to get the storage drivers (computer can see the device and I can put files onto it), but I'm not sure about ADB, because the computer says nothing when I connect it in debug mode and it just makes a noise that a USB device is connected. I tried using LiveSuit to flash it, and after watching some guides that tell you to hold down the volume + key and press the power button 6 times, I found out it only works when I hold down the power button, and even when I do that it says that the USB device is not regognized (error 43). I have Windows 8.1, but I tried to do the same thing on my Vista laptop, and after I do that there, it connects and disconnects, and says that the device was unplugged. I wanted to know, how can I flash it? Is it a driver problem or the tablet is just faulty in that matter? I tried using Uberizer and that doesn't find my device as well. I would really be thankful if someone could help me out, because I want to install a custom ROM. Thanks!
Have you tried the Tech Know forums : http://www.techknow.me/forum/index.php?board=130.0 ? They are quite resourceful when it comes to cheap tablets or devices.

Lenovo ideatab 6000-h

Hello friends, I'm new here and i have troubles with the lenovo 6000h tablet. Its loading the lenovo screen and after that it shows the dead android with the red triangle. I got everything i need to flash it i load the scatter press download and when i connect the usb nothing happens. I have installed the drivers needed so i think the problem is that the micro usb dock is a bit loose, when charging it needed to be in specific position to get charged. What do you think is it possible this to be the problem? What are my options can i flash from sd card ? The mediatek driver also gives me the code 10 error but i have read that some people flash their devices despite that error. Any help would be appreciated!

Categories

Resources