Hi all!
I faced a problem after installing the latest update from the Mi Fit official app.
Amazfit Bip is stuck on "smartphone <--> watch"
The watch at night decided to update, the phone was in power saving mode and apparently the update hung in the process.
Now on the watch screen only one picture as on an attached screenshot "smartphone <--> watch"
I have been installed several fw's, .res and .gps files by Gadget Bridge (from 0.0.9.49 to 0.1.0.45) tried 20 times but after flashing "smartphone <--> watch" screen appears again.
Now watches works like 1st Mi Band (steps taken appears in Mi Fit app)
Any idea how this can be fixed?
Thank you in advance!
http ://prntscr.com/i2pq06
Partially repaired by downgrading fw to v.0.0.8.74. In this fw watches display works correctly (shows time and I can switch menus). Upgrading to fw above 0.0.8.74 leads to stuck display.
Did you try to set the system language (temporarily) to english? You have no location in your profile so I could only guess. The german mi fit app seems to have this error, too, and un-/re-pairing after setting system language to english is a temporary fix here. Its annoying because after the next update - sometimes agps sync is enough to trigger it - the same error occurs again.
deppjones said:
Did you try to set the system language (temporarily) to english? .
Click to expand...
Click to collapse
thank you - problem solved after autoupdate to 0.1.0.80
Good to hear. My problems started with 0.1.0.80, too
hi. also happaned to me!!! can u write down how did u fixed this please ?
Shure
yuvalhaim said:
hi. also happaned to me!!! can u write down how did u fixed this please ?
Click to expand...
Click to collapse
Unpair Amazfit BIP from the mi fit app (at the bottom of the device settings screen).
Close mi fit app.
Switch system language to english (somewhere in the phone's settings, differs from device to device).
Start mi fit app.
Connect Amazfit BIP with mi fit app (if you don't have any other smart devices connected, this should be accessible from the first screen).
Confirm connection on the BIP.
Wait for any update/GPS/AGPS/sync to be finished.
The Amazfit BIP should now work. Maybe some settings have been reset and the watchface is back to default.
It should be safe to switch the system language back to what it was.
This fix is not permanent. It happened again, when I changed some settings and alarms in the mi fit app, and after an AGPS update (this should be made optional!). But I could not nail down the trigger, as it's running as expected now. I don't know if that's applicable for other languages as well as I only use german - and english for short periods lately.
hi
did the folwoing steps but still dispaly the parring pic,
please any other ideas?
deppjones said:
Unpair Amazfit BIP from the mi fit app (at the bottom of the device settings screen).
Close mi fit app.
Switch system language to english (somewhere in the phone's settings, differs from device to device).
Start mi fit app.
Connect Amazfit BIP with mi fit app (if you don't have any other smart devices connected, this should be accessible from the first screen).
Confirm connection on the BIP.
Wait for any update/GPS/AGPS/sync to be finished.
The Amazfit BIP should now work. Maybe some settings have been reset and the watchface is back to default.
It should be safe to switch the system language back to what it was.
This fix is not permanent. It happened again, when I changed some settings and alarms in the mi fit app, and after an AGPS update (this should be made optional!). But I could not nail down the trigger, as it's running as expected now. I don't know if that's applicable for other languages as well as I only use german - and english for short periods lately.
Click to expand...
Click to collapse
yuvalhaim said:
hi
did the folwoing steps but still dispaly the parring pic,
please any other ideas?
Click to expand...
Click to collapse
Sorry, no idea. If you did the unpairing before the language switching and then the re-pairing, it should partly reset the BIP (but no factory reset, that could only be done from the watch menu).
It's a pity, they did not build in a way to shut down the watch. Some people reported, that after the watch completely drained its battery,, it worked afterwards (but maybe only until the next sync).
Better write to huami for a fix to that.
Btw. I had to reconnect my watch two times today, so I better leave the mi app alone until I get home or my goal is finished. The re-pairing and agps update drains my phone battery quit a lot.
deppjones said:
Sorry, no idea. If you did the unpairing before the language switching and then the re-pairing, it should partly reset the BIP (but no factory reset, that could only be done from the watch menu).
It's a pity, they did not build in a way to shut down the watch. Some people reported, that after the watch completely drained its battery,, it worked afterwards (but maybe only until the next sync).
Better write to huami for a fix to that.
Btw. I had to reconnect my watch two times today, so I better leave the mi app alone until I get home or my goal is finished. The re-pairing and agps update drains my phone battery quit a lot.
Click to expand...
Click to collapse
Unistall MiFit.
Try to install this one :
https://www.apkmirror.com/apk/anhui-huami-information-technology-co-ltd/mi-fit/
Connect and wait.
Kéno40 said:
Unistall MiFit.
Try to install this one :
https://www.apkmirror.com/apk/anhui-huami-information-technology-co-ltd/mi-fit/
Connect and wait.
Click to expand...
Click to collapse
Thanks, but that's exactly the version I am running and that triggered the (buggy) firmware update in the first place.
I have a shortcut for my workaround. While the bug is triggered by any sync apart from steps, it also occurs when notifications are deleted from the watch. I set my phone to english and it seems to be enough to switch bluetooth off and on to reactivate the watch (on my german phone).
That way I don't loose the step counter and settings on the watch. Not that much of a hassle as before, but still annoying. I hope for an update of the firmware soon. Does anybody know a kontact to huami for the BIP? I just found one for the Pace and the Arc, but nothing for the BIP.
A was able to "unstuck" my Bip. Here are my steps:
1. unpair watch
2. Switch phone do English UK
3. Reboot phone
4. Pair watch again with Mi Fit app -> I was able to pair my watch on 2nd try. You should see now a time on display (after update of AGPS).
5. Switch phone back to your language
I think, we have to wait for an update for the firmware. Please report this bug via the mi fit app (the reporting function is a little bit buggy as it requires several tries most of the time). You can include the watch logs as well, maybe that helps to eliminate this bug.
My workaround is rather quick - close mi fit app if open, set phone language to English, wait for the phone to rearrange things, disable bluetooth, wait a short time, enable bluetooth, tap amazfit watch in list, start mi fit app, watch back working without settings and steps lost.
I admit, I am too lazy for that, so I just leave the phone set to englisch until this is sorted out...
deppjones said:
Sorry, no idea. If you did the unpairing before the language switching and then the re-pairing, it should partly reset the BIP (but no factory reset, that could only be done from the watch menu).
It's a pity, they did not build in a way to shut down the watch. Some people reported, that after the watch completely drained its battery,, it worked afterwards (but maybe only until the next sync).
Better write to huami for a fix to that.
Btw. I had to reconnect my watch two times today, so I better leave the mi app alone until I get home or my goal is finished. The re-pairing and agps update drains my phone battery quit a lot.
Click to expand...
Click to collapse
Same issue with my brand new BIP i have just received yesterday.
After pairing, it syncs with the Mi Fit app but the screen stuck in the phone <--> watch screen.
I changed the phone language to English (from Hungarian), pairing is fully done now with watch screen nicely working too.
Anybody ideas on why this is happening and how it should be resolved?
---------- Post added at 07:45 AM ---------- Previous post was at 07:40 AM ----------
xIndian said:
A was able to "unstuck" my Bip. Here are my steps:
1. unpair watch
2. Switch phone do English UK
3. Reboot phone
4. Pair watch again with Mi Fit app -> I was able to pair my watch on 2nd try. You should see now a time on display (after update of AGPS).
5. Switch phone back to your language
Click to expand...
Click to collapse
Hey Xindian, is this proved to be a permanent resolution for you?
I made the same process yesterday with success, and today morning I woke up with the stuck watch screen again
Kawitan said:
Hey Xindian, is this proved to be a permanent resolution for you?
I made the same process yesterday with success, and today morning I woke up with the stuck watch screen again
Click to expand...
Click to collapse
My watch are OK. But I didn't open Mi Fit app yet... I'll try later.
hi i try to do the same process but the problem remain!
the paring pic is still alwayes dispaly. (phone is parring ok to the watch, can find it , can see the steps ect )
xIndian said:
My watch are OK. But I didn't open Mi Fit app yet... I'll try later.
Click to expand...
Click to collapse
yuvalhaim said:
hi i try to do the same process but the problem remain!
the paring pic is still alwayes dispaly. (phone is parring ok to the watch, can find it , can see the steps ect )
Click to expand...
Click to collapse
I am having the same problem. Stuck in the "pairing screen". What can I do?
I also had the same problem in my OnePlus phone. My language was already English. Suddenly watch displayed Spanish language error saying asking to reconnect to phone.
I tried all the above methods but nothing worked even after multiple restarts and unpair/uninstall and watch still showing same error
I paired the watch with different smartphone. At that time it updated resources and agps then mi fit keeps crashing again
Don't know what to do and watch has more than 75 percent battery also. This is becoming really annoying. Not expected from a manufacturer like xiaomi
Sent from my ONEPLUS A5000 using Tapatalk
rstheboss said:
I also had the same problem in my OnePlus phone. My language was already English. Suddenly watch displayed Spanish language error saying asking to reconnect to phone.
I tried all the above methods but nothing worked even after multiple restarts and unpair/uninstall and watch still showing same error
I paired the watch with different smartphone. At that time it updated resources and agps then mi fit keeps crashing again
Don't know what to do and watch has more than 75 percent battery also. This is becoming really annoying. Not expected from a manufacturer like xiaomi
Sent from my ONEPLUS A5000 using Tapatalk
Click to expand...
Click to collapse
I have exactly the same problem. The App crashes directly after syncing on 2 phones...
Kawitan said:
Hey Xindian, is this proved to be a permanent resolution for you?
I made the same process yesterday with success, and today morning I woke up with the stuck watch screen again
Click to expand...
Click to collapse
Sadly, I am back - stuck on sync screen... We have to wait for next update i think.
Hello,
in Germany, last night clocks were adjusted at 3:00am to 2:00am due to dayliht saving. My Android phone switched the time instantly, my Amazfit BIP ignored it, even at 11 am, the time was still faulty, syncing with the Mi Fit app didn't help. The only thing that helped was to unbind and rebind the BIP to the phone
This is really a pitty, I wonder how often at all the BIP does syncronize at all, and why the people developing this piece of software are so ignorant not to implement the most obvious use-cases.
Any tips and hints how the time sync behaviour can be improved? Thanks!
Turn off and then on the Bluetooth. That's all. Works every time. I travel a lot and that's what I do to sync the time when I change timezones.
Sent from my Huawei P9 using Tapatalk Pro
A lot Xiaomi/Amazfit Products (Miband, Bip, Cor etc) has to connect one time to mifit after time change to get the right time again! I use mifit since a few years now and i‘ve never a problem with the time change!
I tried reconnecting bluetooth as well as syncing in the MiFit App, both did not help. Only unpairing and repairing solved the issue Even if these two did work, it is a shame that things like that do not work automatically out of the box...
Hello, i have same issue. Just turn off and on your bip and it solve the problem.
Restart the phone
I had same issue today and restarting the phone connected to my BIP solved the issue instantly. Hope it helps!!
4 years later and my brand new Amazfit Band 7 ignores daylight saving even after a full shutdown. Disappointing indeed because (almost) all my devices, clocks, watches use either DCF or NTP to avoid this issue in the first place.
To all Stratos users. Do you having this problem?
Why is that the real time display sport Data keep changing during lock mode?
I want to see the Lap Time, Lap Pace and Lap HR, but it only temporary and will change back to default value as soon as the screen was lock. So, I am wondering, what is the purpose of having this when it is clearly can not being display throught out the workout session. Funny isn't it?
No issues here using firmware 2.3.6.0 and Amazfit 2.6.3 from AppStore (tested with Treadmill). Choose what data you want to see and the order in Amazfit and it is displayed on watch after syncing, even when screen is locked. If you have problems, I suggest that you reset watch data: upair and pair again but do not restore old data to watch. If you still have problems, do the same but reinstall Amazfit after unpairing watch.
It's true. the problem has been resolved. I just have to reboot the watch, and the active screen will display the lap HR, Pace or cadence just the way i wanted.
Hello all,
So they switched the name of app and now since the new update to Zepp my Amazfit bip is crap the battery only last maybe 1 day ... Before at least a week or better with the bpm and sleep options on . Anybody else having same issues or did the batt in my watch just fail ? I did what the amazfit site said fully charged left alone over night , no bluetooth just sitting on my desktop and it lost 26% over night ....Thanks for any help
Just found this out. Does anyone know of a version of Zepp or an older version of Amazfit software that will work with the Fire HD tablet 10 inch? TIA