Hello
My watch has been working good for the last 3 months but lately acquiring GPS not working the first time when I enter running, I have to closecand open it again, also GPS is giving me crazy paces I am a beginner+ runner but it gives me pace of 1min 27sec / km while it should be around 5min 15sec, I tried update to firmware 2.8.5, but same issue I even tried factory reset same issue.
Can you please tell me what is the issue and how to fix ?
Related
The GPS on my watch stopped working recently.
I installed Wear GPS and I haven't been able to get a lock on any satellites. The satellite count remains at 0/0/0. I'm running it in an open field and have waited longer than 20 minutes with no luck.
I've tried everything; running as standalone GPS, running off the GPS on my phone (high accuracy/battery saving/device only) and switching back. I've reset the watch several times. No luck.
Anyone else have this problem??
Karl
Same problem here!!!
Add me to the list. Just started last week.. no more GPS lock. Restarts and factory resets didn't work either.. any ideas? I feel like I was scammed by Moto/Lenovo.. back to the Garmin..
I miss my dead Garmin!!!
The Moto 360 sport, is not a sport watch for sure.
The GPS, wasn't that good before and now it isn't working at all.
Hi guys!
I experience some problems with the GPS on my Nokia phone with Oreo 8.1. This is how it looks like in the GPS Test app:
https://img1.picload.org/image/dlori...803-201912.png
I tried the following
- turned off the 4G
- also turned on/off the WiFi
- tried changing the location mode from high accuracy to device only
- cleared the AGPS - again no signal, then updated the AGPS, same thing
- restarted the phone
- turned off the phone, waited for a while, turned it on again
- removed the SIM card, waited for a while, put it in again
Google maps finds my location, also Runtastic but it says that GPS signal is weak and tracking will not work. So something is obviously wrong here. This happened before as well, then the GPS worked perfectly for about a week, now I have the problem again.
Can anybody please help? Thanks!
Hi again,
So the GPS started working again yesterday for a while. It behaved perfectly with no issues and accuracy of 1 meter. Then when I started the app later, it could not get a fix again... Today it is working (for now). I even tested it home in a room and it has 21 satellites in view, 11 in use, with 3 meters accuracy. For comparison my other phone can only see 17 and uses 5.
So when the GPS decides to turn on, it works perfectly. But it also often happens that it cannot fix. Would you guys say that this is a hardware or software error? If it is the software I would be willing to wait for an update. If it is a hardware problem I still have 4 days left to return the phone, so please let me know. Thanks!
Did you ever find a fix?
All three of my stinking Androids are having this issue since updating to Oreo and Pie. I drive hours a day and NEVER had this issue until I updated and it started occurring right after the update. I even bought a brand new Pixel XL an it's doing the same thing.
Hi All.
I recently got an Amazfit Stratos and I am having a horrible time trying to gps track my outdoor cycle.
I have tried twice, and both times, the GPS just either:
*Intermittently records data
or
*stops recording gps data altogether.
Basic questions?
Urban areas and Woods... same issue
Urban areas are residential.. no high tall building
Weather was good on both occasions
Yes I am waiting for GPS lock
Heart rate and time measurement continue flawlessly (shows data for the entire ride). It's just GPS tracking that is totally weird.
P.S. It's not "drifting" or inaccurate.. it seems to only switch on the gps sporadically... recording "every now and then"...
No errors or issues reported during the activity.
Latest Firmware (Although last nights a new firmware popped up, haven't tried the activity with last night's firmware.)
Both previous activities was on latest firmware at the time. (Yesterday and the day before)
And the REAL issue for me really, is that my wife's Pace records perfectly on the exact same routes where my Stratos just can't get anything usable going...
I have logged "feedback" request with logs using the app, but have not had any response other than, thanks.. we may use your feedback in the future...
From my own conclusions, the gps works.. because when it tracks... the location where it tracks is accurate.. it just doesn't track constantly. See my attached screenshot of my last ride. (Where my wife and her Amazfit pace tracked perfectly)
Any Ideas?
Cant add the image due to post count... How do I add it to this post?
Have you tried factory reset of the watch? Procedure is to unpair it from the app, it will reset itself, start fresh clean and ask for a pairing.
After pairing it will load last 7 days of your work, while all other old data will remain in the app, on your Mi account cloud. What you will have to add separately are only the 3rd party watchfaces, if you have installed them before.
Strongly suggest you try this first, it takes 5 minutes of your time, and you will lose no data.
image
https://ibb.co/rcJXcyx
Thanks Nidza. I will surely try this. I have not yet as the watch is brand new. Upon receiving it It upgraded firmware 3 times from out of the box, and then I started using it.
I will give it a try, surely cant hurt.
Well what do you know. That factory reset seems to have done the trick!
Thanks!
Some points worth noting:
from the factory settings, a few watch settings did not pull through from the sync back to the app after factory reset.
Time format: My previous time format was 24h (Doubt that makes a difference)
Auto Sync: After factory reset, auto sync is off (I had it "on" before). Can't say if this actually causes any bugs to pop up? Maybe the watch tried to sync which interfered with gps functions? I used it yesterday with auto sync off and it worked well. I will investigate if auto sync on causes the GPS issue again.
Thanks again.
Hi guys, is it normal, that my Stratos's Gps show me the speed to much delayed. I checked it with my car, and the gps gets to the same speed as my phone's one, but maybe 10 seconds later. By skiing it can mean worse maximum speed measurement. It is like that with all the Amazefit Startos watches or I have a wrong one? Thanks for the answers!
It's not the same sampling frequency for a car as it is for a walking man. Watch gps do not need to detect non-human speeds, so there is a lower sampling. (Slower).
Same issue again FW version 4.2.8.0:
stops recording gps data altogether after a few minutes.
I've reset and unpaired the clock twice but the issue remains.
Any advice?
Hello, I have a problem with my stratos and I would like to know if anybody else has this problem or how to fix it.
When I finish my run and then sync with phone and open the app to check my run the finish flag on the map is not on the proper spot but 2-3km sooner.
For example, I run about 15 km but on 12th km, it sets finish flag but it continues to count distance, pace and so on further. In the app, it shows proper distance and everything seems ok but when I look on the map finish flag is on 12th km.
It seems like no issue at all but after uploading on Strava it cuts off everything after the finish flag, so it shows only those 12kms and nothing else. And this bothers me because I use Strava as my primary app to analyze my runs. Interesting is that no matter how long I run it always cuts off more or less the same distance around 2-3 km before the real finish.
I appreciate any help.
Go to Settings on wacth -> Activity reminders, set both to ON, save, then set both to OFF again (you must reset them).
If watch is running firmware > 2.3.7.0 then there is a bug when GPS signal is lost that didn't happen in the past. You may want to factory reset but do NOT restore old data to watch to reset all data, do the above again (also reset Activity reminders), make sure you get a strong GPS-fix before starting to record any activity. And to get better HR data, enable continuous HR for at least 24h and use the watch while you sleep to record resting rate.
lfom said:
Go to Settings on wacth -> Activity reminders, set both to ON, save, then set both to OFF again (you must reset them).
If watch is running firmware > 2.3.7.0 then there is a bug when GPS signal is lost that didn't happen in the past. You may want to factory reset but do NOT restore old data to watch to reset all data, do the above again (also reset Activity reminders), make sure you get a strong GPS-fix before starting to record any activity. And to get better HR data, enable continuous HR for at least 24h and use the watch while you sleep to record resting rate.
Click to expand...
Click to collapse
Thanks for the reply.
I tried reset activity reminders but it did happen again. The watches are running on 2.3.9.0 and this problem first time occurred on 7th January. Is it possible that some update came out around that date?
About the GPS when I get a green screen which indicated good GPS lock and I start the activity it shows always altitude like -20000m and it takes some time until altitude becomes accurate but I always wait on the same spot till it's ok. Could that be a problem? Should I wait to start tracking even though GPS is ready?
After factory reset can I upgrade the watches to the current version or I should stay on some older one?
Reseting data will only erase the activity data stored on watch, it won't affect firmware. I'd suggest that you do the procedure above, and also turn off the watch for about 15s to reset sensors. And find start to record the activity as soon as you get a green GO, wait a few seconds for a stronger GPS fix.
Hello, I have the same exact problem on Amazfit Pace. It happens on Cycling and Walk and always cut the last 1-2 km of the track before the arrive regardless of the length of the ride.
I would try the suggested solutions but I can't find Activity reminders on Pace.
Archenan said:
Hello, I have the same exact problem on Amazfit Pace. It happens on Cycling and Walk and always cut the last 1-2 km of the track before the arrive regardless of the length of the ride.
I would try the suggested solutions but I can't find Activity reminders on Pace.
Click to expand...
Click to collapse
On the Stratos Activity Reminders are found under Settings > General. Not sure if it will be the same on the Pace.
raubbbyy said:
Hello, I have a problem with my stratos and I would like to know if anybody else has this problem or how to fix it.
When I finish my run and then sync with phone and open the app to check my run the finish flag on the map is not on the proper spot but 2-3km sooner.
For example, I run about 15 km but on 12th km, it sets finish flag but it continues to count distance, pace and so on further. In the app, it shows proper distance and everything seems ok but when I look on the map finish flag is on 12th km.
It seems like no issue at all but after uploading on Strava it cuts off everything after the finish flag, so it shows only those 12kms and nothing else. And this bothers me because I use Strava as my primary app to analyze my runs. Interesting is that no matter how long I run it always cuts off more or less the same distance around 2-3 km before the real finish.
I appreciate any help.
Click to expand...
Click to collapse
Amazfit ended up replacing my watch for this issue. None of the fixes they suggested worked. If they are hesitant to replace the watch, remind them of the Satisfaction Guarantee slip included in the package when you purchased the watch.
I have the same problem on my Amazfit pace... So annoying!
Has anyone found a fix?
d0d091 said:
I have the same problem on my Amazfit pace... So annoying!
Has anyone found a fix?
Click to expand...
Click to collapse
Hello, I have the same kind of problem.
My watch : Amazfit Pace 2.8.5.0
It happens only when the run is more than 15km
The finish flag is about 1.5 km to short.
The total distance is ok on Zepp App but it is not good in Strava.
1
Does anyone has a fix?
did you ever tryed a climb and see what the altitude map shows you?
I think my issue (https://forum.xda-developers.com/t/...os-3-2020-12-03.4033223/page-25#post-84231665) is because of that...
butcher33 said:
did you ever tryed a climb and see what the altitude map shows you?
I think my issue (https://forum.xda-developers.com/t/...os-3-2020-12-03.4033223/page-25#post-84231665) is because of that...
Click to expand...
Click to collapse
Hi.
First sorry for my english.
I have same issue. Zepp is the problem. GPX data from watch is ok. When it is updated to Zepp, data is ok.
But when you download the .gpx from Zepp (like Strava should), the latest data is missing in the .gpx
I opened a ticket at Amazfit but for them everything is fine.
In the screenshot below, we see on the left my watch's .gpx on the left and Zepp's .gpx on the right. There are 30 seconds of data missing.
Hi all,
Since some days the AGPS data from watch is not updating anymore. I have synced several times. Does anyone else have the same problem? Any idea how to fix this? :crying:
Kind Regards
Christian
Hello ! Same problem for me since one week : AGPS is expired, and sync with Amazfit Android app doesn't fox the issue. I've already reset the app and the watch, with no change...
AGPS sync problem
slayne1 said:
Hello ! Same problem for me since one week : AGPS is expired, and sync with Amazfit Android app doesn't fox the issue. I've already reset the app and the watch, with no change...
Click to expand...
Click to collapse
Hello, I have same problem.
I have factory restarted the watch 4 or 5 times, i uninstall and install the app and still nothing!?
Since the AGPS want sync i have very bad GPS recorded running activity.
Please help?
For Android Only.
Uninstall Amazfit Watch App [3.xx]
Restart the Phone.
Install Amazfit Watch App [Downgrade to 2.7x or 2.9x by manual install APK]
Again pairing and A-GPS can update.
Have downgraded to 2.9. Will report back on AGPS status.
Did not work.
Can I ask, can people on the forum please try a manual sync? Options -> Sync? On my Stratos, it fails at 34%. Want to see if it's something at my end, or if related to the Xiaomi server issues.
I am having the same problem with the Verge China 3.0.50.0 and App 3.6.1.
I have sync like more than 20 times and it still tell me that my AGPS data has expired.
i got same problem, i did't update for a gps on amazfit pace
maybe, xiaomi server is update
Seems ok today.
When you pull down the sync you will see the sync progress (%). The the first count will go to 90% and finish. Then it will reset to 10% and count to 90% then finish.
Previously the 2nd count sync will stuck at 10% for a while and stop.