Hello,
I have an interesting case which never happened before. I have got a smartphone Alcatel 5 with Android 7.0. Sometimes when my phone is connected to the wifi the whole network stop working with the message "No internet connection" (on all connected devices). I was thinking that the problem is from the ISP, but the internet access is back when I disconnect and connect my phone and also this happened at 3 different places with 3 different routers. The solution is always the same - to reconnect my phone. The phone is with the stock build with the latest system update and not rooted.
Model number: 5086D
Android version: 7.0
Baseband version: MT6750
Kernel version: 3.18.35+
Build number: 01003
Custom build version: alps-mp-n0.mp7-V1.54.1_jhz6750.66.a.n_P72
Well it is not that big kind of issue, but I am really interested in how is that possible?
Thanks in advance!
Related
I purchased Galaxy Tab 7" Any call from Korea last week and got it with me to Egypt, with the following specs:
Model number: SHW - M180S (SEC-SHWM180S(B))
Firmware Version: 2.3.6
Baseband version: M180s.EH12.1526.ST
Kernel version: 2.6.35.7 ([email protected] #2)
Build number: GINGERBREAD.Tj24
S/N: R14B199307
The tab is working very good but one option which is it can not connect 3G for data browsing (Can not surf the net), after entering the settings--->Wireless and network, i found an option 3G data call settings dimmed so I cannot change the settings. I tried the Sim on my HTC it worked with no problems.
Please advise how I can use the 3G on the Galaxy Tab, I worked on the 3G at Korea and there was no problems !!
Thank you very much
hrmy
We have the same problem and unit came from korea.
Set your apn settings if correct.
Download to the market 3g Auto connection it free. After you download. Change the connection mode to use direct mode. Check the advance setting to have wigget in home screen. And back to home. If you want on the 3g. Just on the 3g and they scan. Then back to home. On the wifi even there no wifi signal after 2 to 3 sec turn off wifi after that the 3g icon appears. That it. Now you can use your 3g. I hope that i help you. You can browes your net to your dolphin hd and other. Not on our original browser. Becouse our 3g call setting was disable and dimme.
Thank you very much.
Can you help , I want to add Arabic fonts.
Model number: SHW - M180S (SEC-SHWM180S(B))
Hi Dear
i have a restarting problem with my device if battery full or connect with charging my device restart automatic nonstop can any body help me and tell me the solution
Try to flash this rom via odin it is 10000% working and rooteeeeeed http://main.develoid.com:82/samsung...OME_M180S.UC27_REV03_user_low_ship - ROOT.tar
Hi,
I have a Razr Maxx phone. During initial setup, I am able to set wifi parameters and connect to my adsl wireless modem. then when I try to continue the setup and connect to motorola site or whatever that is to accept the agreement and ... it just shows communicating with server... screen and then returns to set up wifi screen. I tried to reconnect many times, but no success. finally I skipped setup.
And it gets more interesting!
I can browse the internet with built in browser!
I can create a google account and it syncs OK. After creating google account I get the (blue-status) wifi indicator meaning that I have data connection to the Internet! OK, now I go back to system update or creating motocast ID, again same problem that happened during set up! communicating with server and again back to wifi set up options page!
I even factory reset, soft reset and recovery reset the phone. still no success!
Can anyone suggest a solution?
I googled the problem, and I came up with users mentioning the word "iptables". Could this problem be related to that? or is it any way to fix or restore it?
Phone is international version running on android 2.3.6
System version: 65.1.40.XT910.MERetail.en.06
Baseband version: U_03.1C.91P
Webtop version: WT-2.0.0-139
Kernel veersion: 2.6.35.7-g8abf869 [email protected] #1
Ap flex version: GAS_ASIA_USASPDRRTUAE_P011 GAS_ASIA_USASPDRRTUAE_A012
Build number: 6.5.1-167-SPD-IRD-40
Build date: Feb 6 2012
Hey,
My Samsung galaxy s2 will not receive or send any calls or texts whilst i have my contract virgin mobile UK sim in, the mobile internet still works fine though. I can use the phone with a 3 sim in even though it was locked to Vodafone when i got it, It's not a problem with the sim either, i can put in in other phones and it will work just fine.
I've tried flashing many different kernals and firmware in the hope to fix this problem but none have worked.
Some of my device info is here if its needed:
Model number: GT-I9100
Android version: 4.0.4
Baseband version: I9100MUGKG2
Kernal version: 3.0.15-I9100XWLPT-CL941023
Build number: IMM76D.XWLPT
Thanks for any feed back!
UPDATE: Whenever i enter the call settings on the device it won't let me enter call forwarding settings and additional settings, it' comes up with the message: Network or SIM card error.
Hi folks,
I'm very need your help with this one.
I have recently bought a Sony Xperia Sola, and since I've had it, there always have been network issues. What do I mean?
a) 2g/3g cellular data enabled, but every single application says "no network service" (even though the network icon appears without error in the status bar).
b) when I connect it to my home WiFi network (ADSL router), the device successfully acquires IP address and displays "connected" (the WiFi icon is being displayed without error in the status bar), but same thing here - each application says "no network service".
c) on the other hand, it does work when I'm using my second device (Galaxy Nexus) as an access point.
So to summarize:
looks like the problem is not related to my cellular company, because I'm experiencing problems with WiFi as well
this is probably not a hardware problem, because the network works successfully with tethering
Device info:
Model number: MT27i
Android version: 2.3.7
Baseband version: u8500-49020604-R1G_EC14
Kernel version: 2.6.35.7+ [email protected] #1
Build number: 6.0.8.3.184
Could any of you please assist me how to find a cause for this problem?
Is there a way to look at the logs to find out error-specific information?
I would be greatly thankful for any assistance.
Alex.
Use SUS and flash stock ftf again, maybe it will help you!
http://www.sonymobile.com/in/tools/update-service/
gentlemen,
I reached my trial and error boarders with this problem.
My SGP521 having now formal most recent Sony build 23.4.A.1.200 Android 5.1.1 flashed with Sony Companion does not provide MAC (b4:52:7e:98:2f:0a) and IP adress to the WiFi and Bluetooth menu anymore, though no WiFi and no Bluetooth. I have flashed several older FTF builds for SGP521 down to 4.4 kitkat using flashtool 0.9.19.8 and problem still exists. I have run a factory reset, no solution. I have run the service nr
*#*#7378423#*#* and it shows me Mac Adress 1: (b4:52:7e:98:2f:0a) in 'miscTA PLUS on filesystem (b4:52:7e:98:2f:0a) is basically known in the system.
S1 Boot Version: 1277-2049 S1_Boot_MSM8974AB_LA3.0_L_37
FILE SYSTEM VERSION: GLOBAL-LTE_23.4.A.1.200
ETS Software Version: 1278-7011_6
Customization Version: 1282-2019_R3C
Active Customization: 1282-2019_R3C
Type Number
TM-0040-BV
Touch Firmware Version: 12
GFuel Guage Firmware Version: The phine doesn´t support firmware version read
Current Modem Cong:
/system/etc/customization/modem/amss_fsg_castor_tar_mbn
and in the Menu: DTCP-IP: SRM Validation (Unavailable)(Unknown Error)
have searched in many forums and couldn't find a solution yet. Is that a hardware issue? Fact is, that th WIFI and Bluetooth module does not start up and in the advcanced setting to WiFI either the MAC nor the IP adress is shown available, fields are greayed out.
Your fast and educated advices are more than appreciated.
Thank you
still sticking with WiFi / Bluetooth issue on SGP521
gentlemen,
I am still stucking with the WiFi / Bluetooth issue - not operable - even after the most recent firmware update.
Any hints? Your help & analysing is highly appreciated - I can send you the link for relevant screen dumps for your error guessing and possible solutions: