poco f1 Hard bricked now dead boot - Xiaomi Poco F1 Questions & Answers

i was browsing and suddenly my device hanged. i forcefully switched off by holding the power button and when i tried to switch it on again, it won't turn on.
when i plugged it to pc qualcom can be seen and also in MIFlash i can see the COM port getting displayed.
i tried to flash Fastboot rom, but im getting error "hello packet not recived and ping via firehose" nothing is working.
i went to the service center they told me to replace board as u know how they don't know much than that.
then i went to local mobile repairing shop, they told me hardware is fine but device is boot dead and needs to be put online for edl unlock. but their login (something) was not working, told me to wait week or two.
if anybody has faced or knows the solution for this problem please tell me. im in trouble.
ps:
my poco f1 was rooted on official stable rom.

---

In this video I'll guide you to Unbrick Redmi Note 5/Pro without replacing Motherboard, for fastboot flash Xiaomi has introduced the security feature known as EDL Authorization, without Authorized ID you can't flash and unbrick you Redmi Note 5, here I'm representing the FASTBOOT ROM for Redmi Note 5 (Whyred) which'll bypass the MI EDL Authorization, yes there is no need of MI ID Authorization and also you don't have to try test point method.
https://www.youtube.com/watch?v=Pf_pPCGkldI
any one for poco f1

---

will the same method work for poco f1

---

I don't know, we need a developer to edit the file, I guess

---

monzer said:
I don't know, we need a developer to edit the file, I guess
Click to expand...
Click to collapse
how to get edl authorized account and which software is used for the flashing process?

---

umarashraf101 said:
how to get edl authorized account and which software is used for the flashing process?
Click to expand...
Click to collapse
I don't know, I have the same problem:crying:
---------- Post added at 10:29 PM ---------- Previous post was at 10:24 PM ----------
any dev for help:crying:

---

umarashraf101 said:
i was browsing and suddenly my device hanged. i forcefully switched off by holding the power button and when i tried to switch it on again, it won't turn on.
when i plugged it to pc qualcom can be seen and also in MIFlash i can see the COM port getting displayed.
i tried to flash Fastboot rom, but im getting error "hello packet not recived and ping via firehose" nothing is working.
i went to the service center they told me to replace board as u know how they don't know much than that.
then i went to local mobile repairing shop, they told me hardware is fine but device is boot dead and needs to be put online for edl unlock. but their login (something) was not working, told me to wait week or two.
if anybody has faced or knows the solution for this problem please tell me. im in trouble.
ps:
my poco f1 was rooted on official stable rom.
Click to expand...
Click to collapse
any newes

---

monzer said:
any newes
Click to expand...
Click to collapse
Nothing from my side im getting error "ping via firehose" what have u done? What kind of error r u getting?
if the emmc is dead then we r screwed. India has blocked high speed internet in kashmir, i would have tried new rom but i cant download anything. **** india

---

umarashraf101 said:
Nothing from my side im getting error "ping via firehose" what have u done? What kind of error r u getting?
if the emmc is dead then we r screwed. India has blocked high speed internet in kashmir, i would have tried new rom but i cant download anything. **** india
Click to expand...
Click to collapse
I have the same problem

---

monzer said:
I have the same problem
Click to expand...
Click to collapse
Have you reached to service center for your prob

---

If you are able to go to fastboot mode, you can try this
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
best of luck
schubeir

---

schubeir said:
If you are able to go to fastboot mode, you can try this
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
best of luck
schubeir
Click to expand...
Click to collapse
no fastboot dead my phone
---------- Post added at 11:02 PM ---------- Previous post was at 11:01 PM ----------
umarashraf101 said:
Have you reached to service center for your prob
Click to expand...
Click to collapse
no pro:crying:

---

i have same problem , i try to find solution anywhere but still nothing
the best solution go bring ur poco to xiaomi center your phone going be healthly and cheap paying

---

schubeir said:
If you are able to go to fastboot mode, you can try this
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
best of luck
schubeir
Click to expand...
Click to collapse
Don't you know what dead boot is?

---

Poco f1 issue
Bro same issue I am facing now... It happened same as u explained...... But for flashing during lockdown ineed authorized id and pass.... Bro any solution u have help me out
My num:-8692987916

---

Hi, I have a problem that my PC doesn't recognize my POCO F1 in FASTBOOT mode.
I'm running Win 10 64bit (Core i7-3517U), my phone is Global stable 11.6.0. bootloader is NOT unlocked and there is no root.
The main problem: When I try to connect my phone in FASTBOOT mode to my PC and go to System Manager it shows an exclamation mark, not a question mark like it would if you just didn't have the drivers. It also says "The device has been stopped (Code 43) (the other error codes are in the attachments given below) A request for the USB device descriptor failed." I guess this means it's not a simple matter of missing drivers, even if my phone is connected normally
Phone Number : +91 8668606192/ +91 966554769
E-Mail ID : [email protected]

---

This is same thing that happened with me as i was browsing got hanged dead!! I think either device is too poor or this done by company itself. Now the solution for this problem is remove the emmc n flash the emmc chip with the emmc files. Now i had yureka plus for some reason it was hard bricked but there was a solution n that was put those emmc file on empty Memory card n it will boot up the device, After booting up flash the firmware, now let me know if u get those files for poco f1.

---

I visited service center for the same issue
Today i have visited service center for the same issue. they could not identify the problem that what is wrong
they tested my motherboard and told it is okay but they were also not being able to flash the rom
At the end they told me to replace the motherboard which would cost Rs.9717
Can some one please help any dev or anyone how to come out of this problem and revive the phone.
I was on stock and i am a normal user never done anything custom in phone
There are tons of user facing this same problem...I met about 4 more person at service center with same issue
PLEASE HELP

---

umarashraf101 said:
how to get edl authorized account and which software is used for the flashing process?
Click to expand...
Click to collapse
This might help, please sign in using the same Mi account you use on your phone.
https://c.mi.com/thread-2173190-1-0.html

---

faced same problem
Everyoone who is facing this problem ,please tweet on @indiapoco and tag them ..........as i am seeing many users are now facing this problem