i had no os installed and the i installed realme recovery through twrp and then i opened the bootloader and gave the command fastboot flash lock and the my phone started showing - the recovery image have been distroyed .flash the image or go to service centre. what should i do ?
tailedbeast said:
i had no os installed and the i installed realme recovery through twrp and then i opened the bootloader and gave the command fastboot flash lock and the my phone started showing - the recovery image have been distroyed .flash the image or go to service centre. what should i do ?
Click to expand...
Click to collapse
bro i have also same problem,my phone fully dead now it is showing QdLoader 9008 com 5 port only,no fastboot mode or recovery mode,for Covid-19 all service center are closed now,also i checked every solution that available/posted on google baba but not working...
same problem
i am going to try using oppo download tools if it works i will recommend you . but the ofp file is 5+gb so it is taking time to download due to slow net . hope it works
tailedbeast said:
i am going to try using oppo download tools if it works i will recommend you . but the ofp file is 5+gb so it is taking time to download due to slow net . hope it works
Click to expand...
Click to collapse
Did it work??
It happened with me a while ago but my fastboot mode was available with twrp recovery working so i flashed the stock rom twrp file and i was again back to normal.
dkdas2424 said:
bro i have also same problem,my phone fully dead now it is showing QdLoader 9008 com 5 port only,no fastboot mode or recovery mode,for Covid-19 all service center are closed now,also i checked every solution that available/posted on google baba but not working...
Click to expand...
Click to collapse
I am unable to oepn the ofp file . I dont have the required tool . do you have any idea of epening the file?
any solution i am having same issue
any luck? I have the same problem... no recovery,fastboot. Just black screen, PC detects it as QDLoader 9008 (COM5).
Any help is appriciated. TY
feel cry
tailedbeast said:
i had no os installed and the i installed realme recovery through twrp and then i opened the bootloader and gave the command fastboot flash lock and the my phone started showing - the recovery image have been distroyed .flash the image or go to service centre. what should i do ?
Click to expand...
Click to collapse
i accidently wipe vendor data and ****ed up .because i did not take a backup. my friend flash twrp moded ozip into it but no use. after the moded twrp flash my otg doesn't recognize.
Same problem bro plz give me solutions if you solve this ?
did anyone find a solution to this problem?
I need to urgently fix it as I have no other phone.
same issue with me and because of this i went to offline repair center and they said your phone ecc will corrupted and you have to change, so i say ok but after two days they said brother sorry but your ecc will not get back i tried lots of time but not done. so i finally search realme official service center and then just left my phone there and next day they said sir you have to change your motherboard and cost i have to paid will shock me they said your bill sir 6500rs. and finally i bring back my phone.
please guys i am in a serious trouble i had this single phone which was working and now i am having the same issue no fastboot no recovery just boot image destroyed service centre is charging 9k for changing motherboard but i still feels like i doesnt need a motherboard change please help me guys i dont wanna let go my favourite phone
harshalkhade said:
same issue with me and because of this i went to offline repair center and they said your phone ecc will corrupted and you have to change, so i say ok but after two days they said brother sorry but your ecc will not get back i tried lots of time but not done. so i finally search realme official service center and then just left my phone there and next day they said sir you have to change your motherboard and cost i have to paid will shock me they said your bill sir 6500rs. and finally i bring back my phone.
Click to expand...
Click to collapse
bro which service centre and where please tell me
Related
Hello Every All!
I have this device name s2 hd lte shv-e120L. Which Is Brick by my mistake. it was a rooted device and i was copying these files
"1. /system/lib/libril.so
2. /system/lib/libsec-ril.so
3. /system/lib/libsecril-client.so
4. /system/lib/libsecril-client-sap.so(4.0.4+)
5. /system/bin/drexe" unfortunately i moved the files to another folder. when the device restart it gives me a logo some thing like that. then i connect the device with pc. and run the odin 3.07 . and select the md5 file which worth about 950 mb.(which has included rom firmware every thing full package). the odin flash modem amss.bin sucessfuly but was stop at when it was flashing system .i retries many times. i change the odin version. odin 3.05 or odin 1.85 but nothing happens i change the flash package. i download the orignal firmware from sammobile. and try to flash. but i was getting some thing like xml...write faild error at the start. then i decide to flash cwm recovery backup. which i has already made before some days. the odin shows some thing like coppying files 2 minutes remaining. getting reponse 2 minutes left. etc . i stoped the flashing and then suddenly my cell was turned off.. and when ever i connect my device it shows me Qhsusb_dload. i installed the drivers. device manager shows me Qualcomm HS-USB Dloader 9008 (com3)..
Then I Take A Serach And Read Out Many Threads . at Last I Go to Vendor And Got The Live Desktop Cd Of Ubunto 12.4 . I Installed. And Download the files Brickfix 1 . Brickfix 2.1 .Pythone. Etc . I Read The Method Posted
http://forum.xda-developers.com/showthread.php?t=1914359&page=7
.i open the Qpst As Admin. Add A Port Name com 3. then i opened the sw name emmcswdownload as admin. i copy paste the files mentioned in the procedure.as i post screenshot. but when ever i click on the download i got the error like that cookie not present , mentioned in the screen shot.i need the sollution of it. i did nt have any jtag. also not able to use this service. i have usb cable s2 (bricked) .internet. pateince.
Plz Suggest me What To Do. If u dont know the situation. plz dont reply.i am really in problem. i needs every kind of help. senior members. developers. and many other freinds welcome to read my thread. still waiting for your replies,
usm125 said:
Hello Every All!
I have this device name s2 hd lte shv-e120L. Which Is Brick by my mistake. it was a rooted device and i was copying these files
"1. /system/lib/libril.so
2. /system/lib/libsec-ril.so
3. /system/lib/libsecril-client.so
4. /system/lib/libsecril-client-sap.so(4.0.4+)
5. /system/bin/drexe" unfortunately i moved the files to another folder. when the device restart it gives me a logo some thing like that. then i connect the device with pc. and run the odin 3.07 . and select the md5 file which worth about 950 mb.(which has included rom firmware every thing full package). the odin flash modem amss.bin sucessfuly but was stop at when it was flashing system .i retries many times. i change the odin version. odin 3.05 or odin 1.85 but nothing happens i change the flash package. i download the orignal firmware from sammobile. and try to flash. but i was getting some thing like xml...write faild error at the start. then i decide to flash cwm recovery backup. which i has already made before some days. the odin shows some thing like coppying files 2 minutes remaining. getting reponse 2 minutes left. etc . i stoped the flashing and then suddenly my cell was turned off.. and when ever i connect my device it shows me Qhsusb_dload. i installed the drivers. device manager shows me Qualcomm HS-USB Dloader 9008 (com3)..
Then I Take A Serach And Read Out Many Threads . at Last I Go to Vendor And Got The Live Desktop Cd Of Ubunto 12.4 . I Installed. And Download the files Brickfix 1 . Brickfix 2.1 .Pythone. Etc . I Read The Method Posted
http://forum.xda-developers.com/showthread.php?t=1914359&page=7
.i open the Qpst As Admin. Add A Port Name com 3. then i opened the sw name emmcswdownload as admin. i copy paste the files mentioned in the procedure.as i post screenshot. but when ever i click on the download i got the error like that cookie not present , mentioned in the screen shot.i need the sollution of it. i did nt have any jtag. also not able to use this service. i have usb cable s2 (bricked) .internet. pateince.
Plz Suggest me What To Do. If u dont know the situation. plz dont reply.i am really in problem. i needs every kind of help. senior members. developers. and many other freinds welcome to read my thread. still waiting for your replies,
Click to expand...
Click to collapse
Ok...first i need to know certain things...
1. Does you device boot into download mode??....if it does then it is not brick its only soft brick and can be revived....:fingers-crossed:
A device that is truly Bricked will not even turn on....it will simply not show anything on the screen...no matter what !!
So if your device boots into download mode then don't worry and don't lose hope...:good:
2. Tell me if it boots into recovery....??
if not ... then try to flash a recovery using odin....
if it does ... then first of all Wipe Data/Cache and Dalvik Cache
copy a rom on your sd card and flash it through the recovery... and then Wipe Data/Cache and Dalvik Cache again...
Let me know if anything helped ... and let me know other updates.... Hope things work for you...
Thanks
Shrewdy said:
Ok...first i need to know certain things...
1. Does you device boot into download mode??....if it does then it is not brick its only soft brick and can be revived....:fingers-crossed:
A device that is truly Bricked will not even turn on....it will simply not show anything on the screen...no matter what !!
So if your device boots into download mode then don't worry and don't lose hope...:good:
2. Tell me if it boots into recovery....??
if not ... then try to flash a recovery using odin....
if it does ... then first of all Wipe Data/Cache and Dalvik Cache
copy a rom on your sd card and flash it through the recovery... and then Wipe Data/Cache and Dalvik Cache again...
Let me know if anything helped ... and let me know other updates.... Hope things work for you...
Thanks
Click to expand...
Click to collapse
Thanks Bro For Your Reply. But My Device Is Totally Hard Bricked. it Does not Turn ON. As i Said i am getting. Qhsusb_dload Mode. that means my device is totally ****ed off.
usm125 said:
Thanks Bro For Your Reply. But My Device Is Totally Hard Bricked. it Does not Turn ON. As i Said i am getting. Qhsusb_dload Mode. that means my device is totally ****ed off.
Click to expand...
Click to collapse
I am not sure... but you can try this guide here ...
http://forum.xda-developers.com/showthread.php?t=1840030
Since it is already bricked... you can take all the chances to revive it....
And i searched on the internet and there is a lot of stuff available for Qhsusb_dload Mode you mentioned above.... take the chances ...:good:
my dear the link you send me is for those phones whose are getting into download mode and turned on. but my phone is dead. bettry is charged.but when ever i am connecting my phone to pc.it does not shows me in odin. the drivers and every thing is properly installed. i needs some one's help who is understanding about my problem. my device is hard brick. it is not going to turn On. also not going into any download mode or recovery...i know there is no way without jtag. but currently jtag is not in my range. so i want turn on it my self. there is alot of members who is eligible to solve my problem. but i think they are busy some where that's why they are not helping me. but i am still waiting ....
Motheboard replacement or JTAG.
MistahBungle said:
Motheboard replacement or JTAG.
Click to expand...
Click to collapse
i am sorry to say but there is a members who can able to fix these problems have a proof take a look here
http://forum.xda-developers.com/showthread.php?t=1914359&page=10
the member name darkspr1te is able to fix my problem and the member E.V.A Too.
1) I call bull**** on that (for the SGS2 at least).
2) If those people are fixing it for you, why are you posting in this thread ?
Bottom line is, if the phone won't boot, you ain't fixing it.
The end.
MistahBungle said:
1) I call bull**** on that (for the SGS2 at least).
2) If those people are fixing it for you, why are you posting in this thread ?
Bottom line is, if the phone won't boot, you ain't fixing it.
The end.
Click to expand...
Click to collapse
i already said in my post if the people's who dont know about my problem should not reply in my thread,
Unfortunately you don't get that option on XDA, you put a thread up, anyone can reply (unless it's a development thread, which this isn't).
My earlier diagnoses of motherboard replacement or JTAG stand.
MistahBungle said:
Unfortunately you don't get that option on XDA, you put a thread up, anyone can reply (unless it's a development thread, which this isn't).
My earlier diagnoses of motherboard replacement or JTAG stand.
Click to expand...
Click to collapse
These Things Are Not in MY Range.
Then your phone stays busted *shrugs*
MistahBungle said:
Then your phone stays busted *shrugs*
Click to expand...
Click to collapse
i needs help not a sadness..
Hello, i got a big problem and needed HELP!
Today i got my Note 4...
so i tryed to unlock the bootloader, bad thing did not logg in at the device.
i booted the mobile in fastboot mode and started the official unlock tool.
until 50% it went quite well then i got an error message:
couldn't verify device
current account is differnet from the account info on the device
so i tryed to boot again but was in a bootloop...
i tryed also flashing a new rom (nikel_global_images_7.4.14_20170414.0000.00_6.0_global_b5d5f15e0e.tgz) and again i got an error
"flash boot error"
hope somebody can help
p.s. sorry for my poor english
Following
Did you read this?
dao80 said:
...i tryed also flashing a new rom (nikel_global_images_7.4.14_20170414.0000.00_6.0_global_b5d5f15e0e.tgz) and again i got an error...
Click to expand...
Click to collapse
Are you sure you are using MTK Variant?
akil777 said:
Did you read this?
Are you sure you are using MTK Variant?
Click to expand...
Click to collapse
yes im sure, i tryed this already and still in bootloop
althoug it says download ok
dao80 said:
yes im sure, i tryed this already and still in bootloop
althoug it says download ok
Click to expand...
Click to collapse
Did you use Sp flash tool?, if yes You should tick all except preloader. You will have to wait 5-15mins for the phone to boot up.
akil777 said:
Did you use Sp flash tool?, if yes You should tick all except preloader. You will have to wait 5-15mins for the phone to boot up.
Click to expand...
Click to collapse
yes i used this tool, after rebooting the mi logo is on the screnn for about 7 secounds then the mobile boots again and again...
;(
dao80 said:
yes i used this tool, after rebooting the mi logo is on the screnn for about 7 secounds then the mobile boots again and again...
;(
Click to expand...
Click to collapse
I have never experienced that.. I think you should send it to your mobile repair center.. Be patient,, It might take few days. Don't panic,
akil777 said:
I have never experienced that.. I think you should send it to your mobile repair center.. Be patient,, It might take few days. Don't panic,
Click to expand...
Click to collapse
i m already looking for a mobile repair center here who can repair xiaomi mobiles...
but so fare all numbers i called are not in service anymore or dont repair xiaomi...
dao80 said:
i m already looking for a mobile repair center here who can repair xiaomi mobiles...
but so fare all numbers i called are not in service anymore or dont repair xiaomi...
Click to expand...
Click to collapse
check this http://en.miui.com/thread-491655-1-1.html
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
robjbw said:
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
Click to expand...
Click to collapse
yes i tried china and global
but only bootloop
but to be on the save side, where to i find a the stock rom (flashable with the miflashtool)?
dao80 said:
yes i tried china and global
but only bootloop
but to be on the save side, where to i find a the stock rom (flashable with the miflashtool)?
Click to expand...
Click to collapse
flash done with mi flash? If got error then try with deep flash cable. see yt tutorials
itsmedRb said:
flash done with mi flash? If got error then try with deep flash cable. see yt tutorials
Click to expand...
Click to collapse
deepflash is also possible for mtk devices?
robjbw said:
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
Click to expand...
Click to collapse
tried it again with the mi flash tool i got following error
80x80004005: FAILED (remote: download for partition 'boot' is not allowed
Hey Guys, i soveld the problem...
AND F**K it was a quite easy solution...
i tried so hard was crying and a kind of very desperate...
anyways i aslo wrot a mail to mi and they did not help at all...
they even say i should lock in at the device if im in a bootloop, kinda funny?
anyways so i drained the batterie and nearly about to give up this device....
BUT i give it one last try, plugt it in and booted it... it took a while but after a while i finaly was able to boot the Phone and set it up...
so this threat can be closed...
thank you guys for your help
So my phone just got stuck while normal usage. Tried restarting and the phone began boot looping.
Did plenty of research and finally decided to flash. Tried to flash using mi flash in fastboot mode but failed then google search made me realise my bootloader was locked. Did more research and decided to flash using test point EDL method.
Things went pretty well and the flash (miui v8) and the process became successful and when I powered my device the phone went back to boot loop again.
Tried flashing again and the result was the same.
It would be really helpful if somebody could actually help clear the issue. Did pretty much everything I could do as a newbie to flashing.
thank you!
There are 2 varients of rn4 one is mediatek(note 4x) and the other is Snapdragon so check if u flashed right firmware
thisbearisdrunk said:
There are 2 varients of rn4 one is mediatek(note 4x) and the other is Snapdragon so check if u flashed right firmware
Click to expand...
Click to collapse
No, I have flashed the correct file(Mido) and the flashing process went quite well but the problem still exists.
M i L i N said:
No, I have flashed the correct file(Mido) and the flashing process went quite well but the problem still exists.
Click to expand...
Click to collapse
How is ur phone being recognised in mi flash tool?
A serial number appears or something else like "com_port" appears?
thisbearisdrunk said:
How is ur phone being recognised in mi flash tool?
A serial number appears or something else like "com_port" appears?
Click to expand...
Click to collapse
It's recognised as COM4 the first time I tried then sometimes when I connect it shows COM3.
M i L i N said:
It's recognised as COM4 the first time I tried then sometimes when I connect it shows COM3.
Click to expand...
Click to collapse
If it recognises ur phone like that then flashing does nothing to ur phone so the only way is to go into edl mode and then flashing
https://forum.xda-developers.com/re...ool-redmi-note-4-edl-mode-o-removing-t3684024
Use this tool to go into edl mode and then flash
This thread can help ,because i bricked my phone once without unlocking the bootloader and the miflashtool recognised my phone like how it recognised urs and this thread saved my phone
Good luck
i was browsing and suddenly my device hanged. i forcefully switched off by holding the power button and when i tried to switch it on again, it won't turn on.
when i plugged it to pc qualcom can be seen and also in MIFlash i can see the COM port getting displayed.
i tried to flash Fastboot rom, but im getting error "hello packet not recived and ping via firehose" nothing is working.
i went to the service center they told me to replace board as u know how they don't know much than that.
then i went to local mobile repairing shop, they told me hardware is fine but device is boot dead and needs to be put online for edl unlock. but their login (something) was not working, told me to wait week or two.
if anybody has faced or knows the solution for this problem please tell me. im in trouble.
ps:
my poco f1 was rooted on official stable rom.
In this video I'll guide you to Unbrick Redmi Note 5/Pro without replacing Motherboard, for fastboot flash Xiaomi has introduced the security feature known as EDL Authorization, without Authorized ID you can't flash and unbrick you Redmi Note 5, here I'm representing the FASTBOOT ROM for Redmi Note 5 (Whyred) which'll bypass the MI EDL Authorization, yes there is no need of MI ID Authorization and also you don't have to try test point method.
https://www.youtube.com/watch?v=Pf_pPCGkldI
any one for poco f1
will the same method work for poco f1
I don't know, we need a developer to edit the file, I guess
monzer said:
I don't know, we need a developer to edit the file, I guess
Click to expand...
Click to collapse
how to get edl authorized account and which software is used for the flashing process?
umarashraf101 said:
how to get edl authorized account and which software is used for the flashing process?
Click to expand...
Click to collapse
I don't know, I have the same problem:crying:
---------- Post added at 10:29 PM ---------- Previous post was at 10:24 PM ----------
any dev for help:crying:
umarashraf101 said:
i was browsing and suddenly my device hanged. i forcefully switched off by holding the power button and when i tried to switch it on again, it won't turn on.
when i plugged it to pc qualcom can be seen and also in MIFlash i can see the COM port getting displayed.
i tried to flash Fastboot rom, but im getting error "hello packet not recived and ping via firehose" nothing is working.
i went to the service center they told me to replace board as u know how they don't know much than that.
then i went to local mobile repairing shop, they told me hardware is fine but device is boot dead and needs to be put online for edl unlock. but their login (something) was not working, told me to wait week or two.
if anybody has faced or knows the solution for this problem please tell me. im in trouble.
ps:
my poco f1 was rooted on official stable rom.
Click to expand...
Click to collapse
any newes
monzer said:
any newes
Click to expand...
Click to collapse
Nothing from my side im getting error "ping via firehose" what have u done? What kind of error r u getting?
if the emmc is dead then we r screwed. India has blocked high speed internet in kashmir, i would have tried new rom but i cant download anything. **** india
umarashraf101 said:
Nothing from my side im getting error "ping via firehose" what have u done? What kind of error r u getting?
if the emmc is dead then we r screwed. India has blocked high speed internet in kashmir, i would have tried new rom but i cant download anything. **** india
Click to expand...
Click to collapse
I have the same problem
monzer said:
I have the same problem
Click to expand...
Click to collapse
Have you reached to service center for your prob
If you are able to go to fastboot mode, you can try this
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
best of luck
schubeir
schubeir said:
If you are able to go to fastboot mode, you can try this
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
best of luck
schubeir
Click to expand...
Click to collapse
no fastboot dead my phone
---------- Post added at 11:02 PM ---------- Previous post was at 11:01 PM ----------
umarashraf101 said:
Have you reached to service center for your prob
Click to expand...
Click to collapse
no pro:crying:
i have same problem , i try to find solution anywhere but still nothing
the best solution go bring ur poco to xiaomi center your phone going be healthly and cheap paying
schubeir said:
If you are able to go to fastboot mode, you can try this
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
best of luck
schubeir
Click to expand...
Click to collapse
Don't you know what dead boot is?
Poco f1 issue
Bro same issue I am facing now... It happened same as u explained...... But for flashing during lockdown ineed authorized id and pass.... Bro any solution u have help me out
My num:-8692987916
Hi, I have a problem that my PC doesn't recognize my POCO F1 in FASTBOOT mode.
I'm running Win 10 64bit (Core i7-3517U), my phone is Global stable 11.6.0. bootloader is NOT unlocked and there is no root.
The main problem: When I try to connect my phone in FASTBOOT mode to my PC and go to System Manager it shows an exclamation mark, not a question mark like it would if you just didn't have the drivers. It also says "The device has been stopped (Code 43) (the other error codes are in the attachments given below) A request for the USB device descriptor failed." I guess this means it's not a simple matter of missing drivers, even if my phone is connected normally
Phone Number : +91 8668606192/ +91 966554769
E-Mail ID : [email protected]
This is same thing that happened with me as i was browsing got hanged dead!! I think either device is too poor or this done by company itself. Now the solution for this problem is remove the emmc n flash the emmc chip with the emmc files. Now i had yureka plus for some reason it was hard bricked but there was a solution n that was put those emmc file on empty Memory card n it will boot up the device, After booting up flash the firmware, now let me know if u get those files for poco f1.
I visited service center for the same issue
Today i have visited service center for the same issue. they could not identify the problem that what is wrong
they tested my motherboard and told it is okay but they were also not being able to flash the rom
At the end they told me to replace the motherboard which would cost Rs.9717
Can some one please help any dev or anyone how to come out of this problem and revive the phone.
I was on stock and i am a normal user never done anything custom in phone
There are tons of user facing this same problem...I met about 4 more person at service center with same issue
PLEASE HELP
umarashraf101 said:
how to get edl authorized account and which software is used for the flashing process?
Click to expand...
Click to collapse
This might help, please sign in using the same Mi account you use on your phone.
https://c.mi.com/thread-2173190-1-0.html
faced same problem
Everyoone who is facing this problem ,please tweet on @indiapoco and tag them ..........as i am seeing many users are now facing this problem
When i flashed the Evolution X Rom to Stock rom It Got Failed And My Device Is Not Turning ON.
Whenever I Tried To Install stock Rom using mi flash tool It Is Saying "Cannot Recieve Hello Packet" & write time out,maybe device was disconnected Please Help ME To Fix
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
papsr6 said:
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
Click to expand...
Click to collapse
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
wetito said:
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
Click to expand...
Click to collapse
I Had Tried EDL flashing from Unlock Tool Flashing Done Perfectly But Formatting Failed..Is it a partition error ?.. The Display is not turning on.. No Signal Only The Signal is Entering EDL mode
wetito said:
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
Click to expand...
Click to collapse
papsr6 said:
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
Click to expand...
Click to collapse
My Phone Is Now Like This :
hishamhsm said:
I Had Tried EDL flashing from Unlock Tool Flashing Done Perfectly But Formatting Failed..Is it a partition error ?.. The Display is not turning on.. No Signal Only The Signal is Entering EDL mode
Click to expand...
Click to collapse
What you wrote is not good... I don't know unloock tool. But before use this applications is necessary read carefully the instructions. It seems you didn't have do this. Good luck. Ps: if your phone boot into fastboot reflash stock via miflash... If you don't have made a big damage it will work. Very import is select the correct slot before flash... In my case i always select slot a to make a clean and safe installation
wetito said:
What you wrote is not good... I don't know unloock tool. But before use this applications is necessary read carefully the instructions. It seems you didn't have do this. Good luck. Ps: if your phone boot into fastboot reflash stock via miflash... If you don't have made a big damage it will work. Very import is select the correct slot before flash... In my case i always select slot a to make a clean and safe installation
Click to expand...
Click to collapse
is mi authorized account needed
hishamhsm said:
is mi authorized account needed
Click to expand...
Click to collapse
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
wetito said:
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
Click to expand...
Click to collapse
no fastboot , no charging
wetito said:
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
Click to expand...
Click to collapse
will you help me to flash my phone via teamviewer
Sorry if you have damage bootloader (so fastboot don't work), the only way is edl. But i don't know how to solve edl flash fail. You had ask to other user, or search with Google. Or i'm afraid for you... Buy new phone. For the future if you want modding... Do it carefully
wetito said:
Sorry if you have damage bootloader (so fastboot don't work), the only way is edl. But i don't know how to solve edl flash fail. You had ask to other user, or search with Google. Or i'm afraid for you... Buy new phone. For the future if you want modding... Do it carefully
Click to expand...
Click to collapse
Thanks Bro Thanks For Your Support,.... Love From Kerala , India
Good luck
Same thing happened to me then i went mi authorised service centre and they charged 179rs and now my phone is working fine
azeem_saifi0411 said:
Same thing happened to me then i went mi authorised service centre and they charged 179rs and now my phone is working fine
Click to expand...
Click to collapse
is that phone under warranty while it was bricked
hishamhsm said:
is that phone under warranty while it was bricked
Click to expand...
Click to collapse
Sorry no. You have the bootloader unlocked... If your restore via edl will fail, in my opinion the best choice is buy a new phone. I don't know in your country. considerating that motheborard is not damaged... But phone must be open... The minum cost of this repair i think could be 100 € (convert in your currency). On YouTube there are a lot of tutorial how to do by yourself... But i'm not shure you have all skills...
wetito said:
Sorry no. You have the bootloader unlocked... If your restore via edl will fail, in my opinion the best choice is buy a new phone. I don't know in your country. considerating that motheborard is not damaged... But phone must be open... The minum cost of this repair i think could be 100 € (convert in your currency). On YouTube there are a lot of tutorial how to do by yourself... But i'm not shure you have all skills...
Click to expand...
Click to collapse
I Have Given It to A repair shop. They told me that that is emmc/UFS chip issue. So they will reprogramme the chip fix it and give the phone to me... They Told that it should fix..
Anyway I'm from India
hishamhsm said:
I Have Given It to A repair shop. They told me that that is emmc/UFS chip issue. So they will reprogramme the chip fix it and give the phone to me... They Told that it should fix..
Anyway I'm from India
Click to expand...
Click to collapse
I suppose that was the problem. I hope the repair shop in india are cheapest than in italy for the future... Make Modding with care
wetito said:
I suppose that was the problem. I hope the repair shop in india are cheapest than in italy for the future... Make Modding with care
Click to expand...
Click to collapse
Repairing cost around 10dollars . In India repairing cost is low but the price of mobile phones and spare parts are too high due to tax.
Thank you so much for your help and support bro. Love From India❤❤