Hi XDA's,
EDITED AS THIS PROBLEM HAS BEEN SOLVED
ORIGINAL POST
Hope all doing well,
I got OPPO a71 with MT6755 chipset here which is totally 'DEAD' by now, pressing power button wont turn it ON but it still can be detected by Windows PC ( as MTK USB Port ), so there's still chance of reviving. hahaha...
I download its stock ROM and flash using latest & several Old version SP flash tools but I get stucked on Verified Boot ERR and it asking for xxxx-verified.img file and I've no idea where to download those verifed.img file. I also try to flash using other MTK tools and still no luck!
Click to expand...
Click to collapse
A SIMPLE QUICK SOLVING METHOD
1 ) Find the correct ROMs for device and also correct MTK preloader drivers. I had to download 3-4 ROM archives from several sources for this phone model for my case, this OPPO A71 actual details as below.
Device Brand : OPPO
Device Model : CPH1717
Device CPU : MT6755
Device IntName : CPH1717
Device Version : 7.1.1
Device Project : CPH1717EX_11_A.02_170815
- Start flashing using SP flash tools latest version and flash ONLY Preloader file ( Trying to flash in normal way but I get stucked at verified boot ERR ).
- Flash the rests of ROM after ( recovery, boot, lk,bin, system imgs & etc )
Related
hi.I used SP Flash Tool to flash my phone with the wrong ROM and now its DEAD.It won't turn on.it won't charge and still PC detection as Mtk Usb Port.
I have another same device.i get backup of stock ROM with Mtk Droid Tool.(i know backup files work.recovery file with scatter flashed sucsesfully when i install cwm recovery on new device)
i can format whole flash with SPFT and get green circle.
then try to download,but this errors appeared.
with SP FLASH TOOL 3.1224.01 : S_DL_GET_SETTING_FAIL (5054)
with SP FLASH TOOL 3.1304.0.119 :S_DA_DRAM_NOT_SUPORT (3004)
i see this error too : booloader doesnt exist on nand flash.please download bootloader first!
i think its bootloader problem so maybe testpoint method works.problem is i dont know which one is TP and how can i use it.
cpu : mtk6517(6577)
ram:512
android :4.0.4
http://www.apanda.com.cn/a60t/
anyone.please help
Hello guys, I have a HiSense U970 with the MT6589 chipset which got hard bricked a week ago. The phone is running a stock 4.2.1 JB and rooted. The problem is that whenever I try to flash anything using SP Flash Tool it shows this error:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed
I am hopeful the phone isn't totally dead since it can be:
- Detected by the computer WITHOUT the battery while holding vol down
- In Device Manager, it would show MTK USB Port (ComX) under Ports when vol down is held.
This is what happens now:
- Charging does not do anything.
- Cannot boot into recovery
- Cannot be detected by MTK Droid Tools (but I think this app needs a powered up phone to be detected by its system)
- Cannot flash anything using SPFT v3.1320.0.174 and v5.1524.00
I have searched the internet for fixes and solutions but, everything that I have found leads to that error.
Here was what I had done before the problem arose.
- Installed Preloader driver
- Used the latest version of SPFT
- Formatted whole flash except bootloader as I cannot flash the cwm rom found here without formatting
- Flashed ONLY the recovery and then downloaded it.
Green circle appears and after that, it cannot boot anymore. Cannot charge. Cannot boot into recovery.
I have tried the following with no luck:
- Used SPFT v5.1524.00 and v3.1320.0.174
- Flashing only the preloader
- Flashing only the recovery
- Format whole flash
- Formatting whole flash except bootloader
- Format all + download (v5)
- Firmware upgrade + upgrade (v3)
- Using the write memory method for writing preloader
- Flashing stock preloader
- Doing a memory test
All of which goes to the error 4032.
I have also tried using different USB ports with the same results.
If it helps, I used the scatter file for MT6589 and not my own scatter file. Using my own scatter file does not do anything before I flashed the recovery rom so, I used the MT6589 scatter file instead. Also, my scatter file was different from the MT6589.
- This was the scatter file I used.
- And this is my log from MTK Droid Tools which hopefully contains the addresses for the scatter file (I accidentally replaced my own [yea i know, stupid me])
I also cannot find the same scatter file that I had created anywhere on the internet.
I am willing to supply you with anything as long as I have access to it (hoping I have the file/information you need:fingers-crossed.
I am hoping that you know or at least the very least, can guide me out of mine and others misery. Thank you. :fingers-crossed:
My phone xtouch PF73 gives me this message "decrypt error, boot failed" after i tried flashing it.
I have tried two more ROMS but with those i get the "S_NOT_ENOUGH_STORAGE(1011) error message in both SP Flash tool and WiseLink Tool"
Android version: 4.22
MTK platform : MT6572
I used
SP Flash Tool v5.1352.01
SP Flash Tool v5.1628
wise tool v4.6.0.44
How can i fix it?
hi i also have alcatel 4035D im trying to load firmware using sp tool but its giving me an error 1011, i have tried different firmwares
nyado said:
hi i also have alcatel 4035D im trying to load firmware using sp tool but its giving me an error 1011, i have tried different firmwares
Click to expand...
Click to collapse
Reason:
The firmware(s) you are trying to flash to your MTK device is larger than the available space allocated for the firmware in the phone’s storage space.
Possible fix ( was not tested by me ):
Click on the Format Tab
Select/tick Format whole Flash and click the Start button before connecting your device.
Once the formatting is done, go to the Download Tab and select just the Preloader file first and flash it.
After the preloader.bin has been successfully flashed to your device, tick the rest of the firmware files and flash as well.
i always get [ERROR] BROM ERROR status_da_exceed_max_num (0xc0070005) in SP Flash Tool no matter what i do.
i have tried:
1. Vol -
2. Vol +
3. Vol - and Power
4. Vol + and Vol - and Power
5. press nothing just plug in USB (SP Flash Tool does not detects phone in this)
using SP Flash Tool v5.1628 (tied this on Windows 10 x64 and also Windows 7 x64)
help me here.
my current version is OS 8.0.25 with CHINA ROM Android 6.0.0, Mobile codename NIKEL with 3gb RAM & 64gb internal space.
is their any other way to flash MTK Global ROM to latest version??
with xiaomi miflash tool
Mi Flash Tool does not work with MTK version, it is only for Qualcomm version of Redmi Note 4
you have to do the things in FASTBOOT for the nikel device
please can you provide me a guide link without SP Flash Tools??
Facing the same error, were you enable tox it? Kindly quote me, my device is bricked :3
Edit:
I fixed the issue by replacing chinese preloader
thedeadfish59 said:
Facing the same error, were you enable tox it? Kindly quote me, my device is bricked :3
Edit:
I fixed the issue by replacing chinese preloader
Click to expand...
Click to collapse
how you did it? i cant flash preloader file i always get error 0xc0070005
Hello all, i recently picked up a ulefone armor 2s and i was attempting to root it and i have made a mistake and now i don't know what to do as the phone is in a bricked state at the moment.
I followed the guide here
https://forum.xda-developers.com/android/development/root-ulefone-armor-2-easy-rooting-t3780055
and have got nothing as TWRP did not load on to the device properly and i am stuck in a boot loop. i am thinking that somehow i made a big mistake and deleted the recovery somehow and i am unsure on how to load a recovery back on.. I have rooted phones before so i have a basic understanding of ow it works but i dont know how to fix this...
Please Help and thank you for helping
-B
Try using pc.. if its still detected by the system..
If yes check the processor of your ulephone if its mediatek or qualcomm. If its MTK use sp flash tools else use qualcomm flash tools.
Even if the bootloader is missing, its the preloader that will be there. And flash tools are the way they can make use of preloader. Make sure you have proper drivers installed in your system.
If you have a working recovery, install it via flash tools so the device can rise from the dead..
abhinavp649 said:
Try using pc.. if its still detected by the system..
If yes check the processor of your ulephone if its mediatek or qualcomm. If its MTK use sp flash tools else use qualcomm flash tools.
Even if the bootloader is missing, its the preloader that will be there. And flash tools are the way they can make use of preloader. Make sure you have proper drivers installed in your system.
If you have a working recovery, install it via flash tools so the device can rise from the dead..
Click to expand...
Click to collapse
Thank you for this, I got the device back up and running... But I'm missing a bootloader now. Any thoughts on how to flash it?