Related
Hi,
I can't install the A3 recovery, getting the error when I try to enter it or system boots.
boot recovery via fastboot was fine, that way I installed A3.
system seems to be OK, more later...
Any hints how to fix?
Miraculix666 said:
Hi,
I can't install the A3 recovery, getting the error when I try to enter it or system boots.
boot recovery via fastboot was fine, that way I installed A3.
system seems to be OK, more later...
Any hints how to fix?
Click to expand...
Click to collapse
Just flash once more recovery.img. I have the same bug but it's was my fault copy&paste with wrong file name.
I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
I decided to flash the stock recovery again. After I did that I got into rescue mode. I can not do anything anymore in there. No fastboot, no adb.
It just points to zh.ui.vmall.com/emotiondownload.php?mod=restore but in this list there is no download for the Honor 7.
Error messages are:
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What can I do?
try to reboot on bootloader mode with volumes button combination
Doesn't work. I keep getting to this screen.
It looks like the bootloader but I guess it can not load the recovery.
Also fastboot does not work there.
I think i found the way
Hi-Suite installed on the PC. Phone off, connected to PC, press and hold Vol + and Power until the appearance of recovery.
Options available:
Reboot
Download the package
Switch off
Bootloader Mode (aka Fastboot):
Phone off, connected to the PC, press and hold Vol - Power up and appearance of the screen with the droid.
Or
Phone off, disconnected from the PC, press and hold Vol - and while holding down, connect to the PC.
Thanks for the help.
I can't get into recovery that way. When i press vol up + power I get into this screen again because recovery could not be loaded.
Unfortunately i don't think if there is a another way,,, contact with huawei
Try rumrunner on pc to get into fast boot mode.
Immediately close rum runner screen when it starts rebooting
sent with Huggzzz from my modded, non-OC'ed, very fast running S-Off ADR6425LVM on CyanogenMod 11 20150805 Rom with Tapatalk
etticat said:
I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
I decided to flash the stock recovery again. After I did that I got into rescue mode. I can not do anything anymore in there. No fastboot, no adb.
It just points to zh.ui.vmall.com/emotiondownload.php?mod=restore but in this list there is no download for the Honor 7.
Error messages are:
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
What can I do?
Click to expand...
Click to collapse
Assuming that you have bootloader unlocked and adb debugging enabled. Otherwise, I guess, you're out of luck.
Extract RECOVERY.img of respective ROM you have installed using this method: http://forum.xda-developers.com/showthread.php?t=2433454. Copy dload of the same ROM to the root of sd card and insert it. Now turn off the phone and boot into fastbboot (bootloader): conect it turned off with usb to the pc, where you have drivers and platform tools installed. Then press and hold volume down and power on simultaneously as long as needed to boot to fastboot.
After that install previously extracted RECOVERY.img ([Guide]How to root Honor 7). Boot the system, enable adb debugging, go to settings-Updater-Local update and flash the ROM from dload.
Then you may flash custom recovery, replace the ROM, but never again without making nandroid first.
ǀcey said:
Try rumrunner on pc to get into fast boot mode.
Immediately close rum runner screen when it starts rebooting
sent with Huggzzz from my modded, non-OC'ed, very fast running S-Off ADR6425LVM on CyanogenMod 11 20150805 Rom with Tapatalk
Click to expand...
Click to collapse
Isn't rumrunner just for HTC?
Yea it probably is just for the resound. Idk.
I'm noob at all this.
What I do know is although my PC could see the phone perfectly before I tried to s-off. That once phone entered into never-ending boots the PC couldn't see the phone anymore. Hence I couldn't use abd or fastboot on the PC nor would the phone enter hboot, fastboot, + recovery on its own.
Somehow re-running rumrunner it was able to force the PC to see it enough to allow the phone to be forced into fastboot mode and that saved my poor phone.
At this point I think u [email protected] nuthin more to lose with trying it out. I hate to say that i'm sry.
In the least go read my post there maybe it's enough to help u to figure out how to undo what happened to yours.
If you do try to use rumrunner
Have phone powered on while hooked to PC
Say Yes twice in rumrunner
Rumrunner will try to selfupdate
Then it will try to force the phone to reboot
Watch phone screen..if it goes black
Immediately close rumrunner window on PC at that point.
We don't want rumrunner trying to s-off ur honor lol no and it will try soon as phone goes in fastbootmode. Keep phone plugged in PC.
If successful now load adb or whatever u need on pc
---------- Post added at 12:58 AM ---------- Previous post was at 12:57 AM ----------
http://forum.xda-developers.com/showpost.php?p=63595063&postcount=193
ooooo
فرستاده شده از HUAWEI Y330-U11ِ من با Tapatalk
hello.
i have a plk-l01 with stock 5.0.2 and stock recovery.
with multi-tool twrp and root flashed, than i would like to flash modaco rom v4.1 (MM)
now i have by booting "honor" logo and under powered by android.
i have flashed another custom rom (yoda 7.0) but is the same.
with stock recovery can´t flash any rom, while by 5% come error.
what methode will work to flash any rom or stock rom back to phone?
thanks
helpppp
Lefteris Fragiadakis (Frago) said:
try to reboot on bootloader mode with volumes button combination
Click to expand...
Click to collapse
i have same problem but i can access fastboot . i have downloaded stock rom in my pc is there anyway to flash stock rom from adb?
kosmoo said:
hello.
i have a plk-l01 with stock 5.0.2 and stock recovery.
with multi-tool twrp and root flashed, than i would like to flash modaco rom v4.1 (MM)
now i have by booting "honor" logo and under powered by android.
i have flashed another custom rom (yoda 7.0) but is the same.
with stock recovery can´t flash any rom, while by 5% come error.
what methode will work to flash any rom or stock rom back to phone?
thanks
Click to expand...
Click to collapse
You must flash the rom with twrp after wipe system, cache, data.
To install MM the basic version was to be the B330.
Now you have to reinstall the stock recovery and flash the rom complete B330 through the three button.
Inviato dal mio PLK-L01 utilizzando Tapatalk
AleAndroid96 said:
You must flash the rom with twrp after wipe system, cache, data.
To install MM the basic version was to be the B330.
Now you have to reinstall the stock recovery and flash the rom complete B330 through the three button.
Inviato dal mio PLK-L01 utilizzando Tapatalk
Click to expand...
Click to collapse
this method was good, thanks!
now have a stock recovery with stock b330 rom.
thanks
You can root it with twrp-3.0.2-0-plank.img and SuperSU 2.62
YOUTUBE /watch?v=eDyxj6C8eW8
etticat said:
I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
I decided to flash the stock recovery again. After I did that I got into rescue mode. I can not do anything anymore in there. No fastboot, no adb.
It just points to zh.ui.vmall.com/emotiondownload.php?mod=restore but in this list there is no download for the Honor 7.
Error messages are:
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
What can I do?
Click to expand...
Click to collapse
dude, i hope you fixed you issue... i had the same problem just now... all normal until i installed a new version of supersu (2.7.4 i think) and i wiped the cache and dalvic cache (caused problems everytime) after that i couldnt boot the system, error 10 and 2 i think (boot and system).
Then, after the whole day was over and i didnt find a fix for my problem (my twrp worked) i backed up everything and then installed the original recovery i got some time ago from huawaiextractor, but it got worser. did the same like you, every damned step xD now i understood what you were talking about, before i didnt understand what you said...
so when i boot, it says error 10 ans 2 and when i want to start recovery it says 11 and 2 (recovery and boot).
i dont know why usb debugging didnt worked and why i coulnt use fastboot and adb like everytime. i once fixed a similar issue with the honor multitool and adb and fastboot.
Only thing i can do is connect it to my pc and hisuite, then a new menu shows where u can download a package or update, but it says failed everytime when i use it.
So what did you do with your bricked phone?
I had the same problems (errors) I managed to find a solution. Just extract boot.img cust.img repair.img system.img with huawei extractor. Than just make a full cache wipe. Flash this four .img and love your fully working, totally wiped, almost brand new phone!
PS you should find a way to use fastboot!! There is no other way!
ǀcey said:
Try rumrunner on pc to get into fast boot mode.
Immediately close rum runner screen when it starts rebooting
sent with Huggzzz from my modded, non-OC'ed, very fast running S-Off ADR6425LVM on CyanogenMod 11 20150805 Rom with Tapatalk
Click to expand...
Click to collapse
How did you do please ? i can't enter to fastboot mode too
can you help me please ?
etticat said:
I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
What can I do?
Click to expand...
Click to collapse
With a stock boot.img sometimes you'll end up in bootloop like yourself. If you are still having issues follow below steps.
Boot into bootloader mode, if its looping very fast, then press and hold Vol DOWN button once the screen gets blank after a loop and simultaneously connect to PC, you'll land in bootloader mode.
Once in bootloader mode, flash system.img of your respective previous firmware, in your case just flashing system.img will do.
After doing that you can enter into system again. If you want you also can flash the whole UPDATE.APP package by three button combo
I hope this helps someone.
Forgive My Poor English
I already post the recovery to develop section at HERE
RECOVERY FOR MI 8 SE
DOWNLOAD
drive.google.com/open?id=1X39kp3oBz-SYD-fNK-uEgD6VlUUG-WMq
HOW TO FLASH
Power off your phone and press volume down key and press power key to boot to Fastboot Mode
Download Fastboot tools...(Sorry I can't provide this tool)
open a command line(cmd or powershell in windows) and change directory to the directory where fastboot tool locate(cd PATH/TO/FASTBOOT/TOOL), then you can use fastboot simplely
use
Code:
fastboot flash recovery [PATH TO THE IMAGE FILE YOU DOWNLOADED]
to flash
then use
Code:
fastboot reboot recovery
to boot the recovery
IF YOUR BOOTLOADER IS LOCKED,but you wanna try it
You can use
Code:
fastboot boot [PATH TO THE IMAGE FILE YOU DOWNLOADED]
to boot the recovery(not flash recovery)
(not sure 100% success)
Do anything on YOUR OWN RISK
Pictures(and How to set language to English )
Pictures:
And How to set language to English(almost TWRP recovery can use this way)
Decrypt data partition (input your password or you cant mount data partition)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Next screen is 'Keep system partition read-only'
Left bottom is keep system RO,Right Buttom is change Language(no pic )
this is the Main screen and you can follow these steps to change Language to ENGLISH
Finally, something to start with
bao lu your QQ number
i dont understand why the board name is sirius... there is one allready , some Sony xperia z2
I hope you will post a little more detailed installation ...
Xiaomi devices:
Install TWRP via Fastboot mode, then install our ROM
Code:
fastboot flash recovery twrp.img
fastboot boot twrp.img
This will be all?
I presume i have to rename the recovery-TWRP-3.2.1-0629-XIAOMI8SE-CN-wzsx150.img to twrp.img ?
marcel112 said:
I presume i have to rename the recovery-TWRP-3.2.1-0629-XIAOMI8SE-CN-wzsx150.img to twrp.img ?
Click to expand...
Click to collapse
You don't need to rename any file to flash. For simplicity yes if you like.
_katho_ said:
You don't need to rename any file to flash. For simplicity yes if you like.
Click to expand...
Click to collapse
ok, let me refrace:
If i like to flash this recovery for the SE, for it to work, i have to follow the two comments, after renaming the .img to twrp.img
fastboot flash recovery twrp.img
fastboot boot twrp.img
After format data - reboot to recovery - wipe dalvik/etc... Install xiaomi.eu rom.
Stuck by bootloop
marcel112 said:
ok, let me refrace:
If i like to flash this recovery for the SE, for it to work, i have to follow the two comments, after renaming the .img to twrp.img
fastboot flash recovery twrp.img
fastboot boot twrp.img
Click to expand...
Click to collapse
Yes, that should work, it's the usual way to flash twrp.
i tried today to flash twrp, unsuccessfully
I installed fastboot and adb drivers ( flashed miui 10 beat using mi flash tool allready )
I enter fastboot on device
i open cmd prompt
i first enter: fastboot devices, then i get respons with devices number
When i enter command: fastboot flash recovery recovery.img
i get :
target reported max download size of 536870912 bytes
sending 'recovery' (29856 KB)...
but thats it........ nothing happens anymore!!
I tried and waited long time
Who can tell me what is going wrong
---------- Post added 6th July 2018 at 12:40 AM ---------- Previous post was 5th July 2018 at 11:46 PM ----------
I can put the phone in fastboot mode....
As soon as i connect phone to laptop, it takes 1 sec , then phone goes out off fastboot and in de left top corner are very very small letters.
I believe it says, press key to reboot, but like i say, very hard to read.
Phone reboots , then it gives battery in center off screen.
When i pess power again.
All goes normall and i can use phone as it should.
When i use updater app, and choose: reboot to recovery, it does like it should.
I can chooose reboot, wipe data and use mi assistent i believe.
Any idea would be awesome
skolarek said:
After format data - reboot to recovery - wipe dalvik/etc... Install xiaomi.eu rom.
Stuck by bootloop
Click to expand...
Click to collapse
You can try 'Disable DM-verify in 'Advance'...
maybe it work
marcel112 said:
i tried today to flash twrp, unsuccessfully
I installed fastboot and adb drivers ( flashed miui 10 beat using mi flash tool allready )
I enter fastboot on device
i open cmd prompt
i first enter: fastboot devices, then i get respons with devices number
When i enter command: fastboot flash recovery recovery.img
i get :
target reported max download size of 536870912 bytes
sending 'recovery' (29856 KB)...
but thats it........ nothing happens anymore!!
I tried and waited long time
Who can tell me what is going wrong
---------- Post added 6th July 2018 at 12:40 AM ---------- Previous post was 5th July 2018 at 11:46 PM ----------
I can put the phone in fastboot mode....
As soon as i connect phone to laptop, it takes 1 sec , then phone goes out off fastboot and in de left top corner are very very small letters.
I believe it says, press key to reboot, but like i say, very hard to read.
Phone reboots , then it gives battery in center off screen.
When i pess power again.
All goes normall and i can use phone as it should.
When i use updater app, and choose: reboot to recovery, it does like it should.
I can chooose reboot, wipe data and use mi assistent i believe.
Any idea would be awesome
Click to expand...
Click to collapse
ehhh,
you can try run this
fastboot boot [RECOVERY IMAGE YOU DOWNLOADED]
and the phone will boot to the recovery(but it still not flash into your phone)
and use the recovery to flash recovery
if you still get a stuck at
sending boot ......
trying change a computer or change a cable and retry it
q792602257 said:
ehhh,
you can try run this
fastboot boot [RECOVERY IMAGE YOU DOWNLOADED]
and the phone will boot to the recovery(but it still not flash into your phone)
and use the recovery to flash recovery
if you still get a stuck at
sending boot ......
trying change a computer or change a cable and retry it
Click to expand...
Click to collapse
Well i upgraded to succesfull flash twrp
after that i used fastboot boot twrp.img
I booted in twrp, changed the lang to english.
Choose keep system read only
Can use it, but when i tried to backup i get backup failed.
I also cant seem to find the internal storage... i can use the fiel manager, but i dont find the folders like in normal working mode
So i cant backup, flash magisk, so i dont dare to wipe and flash , lets say eu.rom
marcel112 said:
Well i upgraded to succesfull flash twrp
after that i used fastboot boot twrp.img
I booted in twrp, changed the lang to english.
Choose keep system read only
Can use it, but when i tried to backup i get backup failed.
I also cant seem to find the internal storage... i can use the fiel manager, but i dont find the folders like in normal working mode
So i cant backup, flash magisk, so i dont dare to wipe and flash , lets say eu.rom
Click to expand...
Click to collapse
the first screen is use to deecrypt data partition ,if you select cancel or input wrong password,you can't modify data partition
if you dont know the password,you can simply format data partition,but you will loose all data(include internal storage)
q792602257 said:
the first screen is use to deecrypt data partition ,if you select cancel or input wrong password,you can't modify data partition
if you dont know the password,you can simply format data partition,but you will loose all data(include internal storage)
Click to expand...
Click to collapse
whats should be the pasword?
Is that my pin how i unlock my device?
Edit:
And if i choose format data, then my internal partition will be wiped.
How can i flash a new zip file, like magisk or eu.miui rom.
Or after format data i can backup current china beta 10 8.7.5.
Then reboot in system, copy this eu miui rom zip to internal and reboot to twrp again.
Wipe device and flash the eu miui zip file?
What if i wipe and can flash eu miui file.
Can i flash using fastboot a rom?
I mean, can i go back to china beta rom?
I have a ch image 8.6.28
marcel112 said:
whats should be the pasword?
Is that my pin how i unlock my device?
Edit:
And if i choose format data, then my internal partition will be wiped.
How can i flash a new zip file, like magisk or eu.miui rom.
Or after format data i can backup current china beta 10 8.7.5.
Then reboot in system, copy this eu miui rom zip to internal and reboot to twrp again.
Wipe device and flash the eu miui zip file?
What if i wipe and can flash eu miui file.
Can i flash using fastboot a rom?
I mean, can i go back to china beta rom?
I have a ch image 8.6.28
Click to expand...
Click to collapse
The password is your pin code to unlock your phone,and you can mount data partition success
if you can't successfully mount data partition , you can
In the Recovery : Click Advance-> ADB SIDELOAD
and connect your phone to PC
use
Code:
adb sideload [PATH TO ROM ZIP FILE]
to flash without copy that zip file to your phone
also since you can mount data partition successfully,you can connect to PC, copy that zip file to Internal storage to flash
If you change your ROM,you can easily flash that 'fastboot rom' back via fastboot(WARNING : Do not flash wrong ROM,it may replace the bootloader)
and you can go back to china beta rom anytime you want(Just need flash the phone again)
maybe a little hard to understand , sorry for my poor English
Guys problem..
I made backup off miui 10 beta chinese
I wiped system/cache/data/dalvik..
Flashed new eu.miui 8.6.28 rom... install is all good.
When i boot, it is stuck in bootloop
(tried to look for : Disable DM-verify in 'Advance
I can see it not in advance..
Now i am stuck with non working phone..
Who can help me ( fast ?
marcel112 said:
Guys problem..
I made backup off miui 10 beta chinese
I wiped system/cache/data/dalvik..
Flashed new eu.miui 8.6.28 rom... install is all good.
When i boot, it is stuck in bootloop
(tried to look for : Disable DM-verify in 'Advance
I can see it not in advance..
Now i am stuck with non working phone..
Who can help me ( fast ?
Click to expand...
Click to collapse
You have to format Data!!
Superwitschi said:
You have to format Data!!
Click to expand...
Click to collapse
ok, i did format data
Now all is empty.
I rebooted into TWRP again.
I used USB-OTG to install the rom again.
All going well in install, no error
When i choose reboot, no message: No OS installed...
But still in bootloop!!
marcel112 said:
ok, i did format data
Now all is empty.
I rebooted into TWRP again.
I used USB-OTG to install the rom again.
All going well in install, no error
When i choose reboot, no message: No OS installed...
But still in bootloop!!
Click to expand...
Click to collapse
You can try 'install root' in Advance
maybe the bootloop is cause by the dm-verify in the bootloader
Obs: these were the steps that i did to get it, try it by your own risk
----------------------update------------------------
Some people are saying that can't get the 11.1.021 via ota from zui10, but I got the information that this version of qfil 11.1.021 is getting ota to the 11.5, so you should try it just changing the files in the tutorial of step 1 and if don't get the ota, jump to the step 3
-------------------------------------------------------
I did the first part with my bootloader locked, and just got it working this way. I tried to qfil directly the 11.1.021 or use the version updated with the bootloader unlocked but i got error 7 later.
To start, you will need adb and fastboot, and you can get them from here
1- Qfil the zui 10 version from this tutorial
2- Set up a pin (it will be important) and update the zui to version 11.1.021 (right after you install the zui 10 it will pop the update, if not you can use the zui update app)
3- Now that you have 11.1.021 from ota you have to go to fastboot mode (adb reboot bootloader) and unlock your bootloader, if you do this on zui 10 or zui 11.5 you will got on bootloop and have to start all again (tutorial <- you can use this to lock your bootloader for start the proccess too)
4- Go again to bootloader and use fastboot flash recovery twrp.img (download twrp)
5- From fastboot mode, press volume down repeatly until you see "Recovery mode" then press power button, the phone will reboot twice and enter in twrp, you will need to put the pin set on step 2
6- Pass this update zip to your phone from the PC then select it on "install" section and swipe to flash (this was the step where i got error 7 with qfil version of 11.1.021, if you got this, the only solution i know is start all over again owith qfil zui 10)
7- After flash is done, go back to the home page of twrp, select "wipe" and mark "dalvik", "cache" and "data" then reboot system
Your phone will be on bootloop and this is the part that i discover after 2 days trying
8- Turn off your phone and turn it back pressing the power button and the volume down to enter in fastboot mode, you will see on last line that your bootloader will be locked again, and this is the cause of bootloop
9- Use the commands to unlock bootloader again (fastboot flash unlock your_unlock_img.img and fastboot oem unlock-go)
Your phone will boot and reboot in twrp that will do an automatic process, than will reboot again in ZUI 11.5.141 (may take some minutes)
Obs²: After this proccess, if you want to use TWRP to install a rom or something, you will need to flash it again
when I try to install just I got error 7 for everstep :S how can I solve it ?
brujaboy said:
when I try to install just I got error 7 for everstep :S how can I solve it ?
Click to expand...
Click to collapse
Did you try it from qfil the zui 10 with the locked bootloader?
Because i got this error when i ota updated from 10 to 11.1.021 with the bootloader unlocked
Astronomico said:
Did you try it from qfil the zui 10 with the locked bootloader?
Because i got this error when i ota updated from 10 to 11.1.021 with the bootloader unlocked
Click to expand...
Click to collapse
yes I did my friend I installed zui10 with QFIL after that I ınstalled 11.0.21 with twrp and when I try to install 11.5 I got error 7, I did edit with notepad++ but still have this problem
brujaboy said:
yes I did my friend I installed zui10 with QFIL after that I ınstalled 11.0.21 with twrp and when I try to install 11.5 I got error 7, I did edit with notepad++ but still have this problem
Click to expand...
Click to collapse
I think the problem is with the version you're installing in TWRP , after qfil zui10, wait for the OTA for 11.1.021 of the app zui update, it seems to exist some versions of 11.1.021 and the TWRP version is not the same of the OTA
The version of 11.1.021 that i've got by OTA with my bootloader already unlocked on zui10 got error 7 too, just the version i've got with the bootloader locked worked
Astronomico said:
I think the problem is with the version you're installing in TWRP , after qfil zui10, wait for the OTA for 11.1.021 of the app zui update, it seems to exist some versions of 11.1.021 and the TWRP version is not the same of the OTA
The version of 11.1.021 that i've got by OTA with my bootloader already unlocked on zui10 got error 7 too, just the version i've got with the bootloader locked worked
Click to expand...
Click to collapse
we need wait thank u bro
Microsoft Windows [Version 10.0.18362.657]
(c) 2019 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot> adb reboot bootloader
error: no devices/emulators found
C:\Program Files (x86)\Minimal ADB and Fastboot>
Click to expand...
Click to collapse
Fixed
this is whilest in fastboot.. ^^
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 4951729
it pushes a command when phone was on but when in fastboot / bootloader nothing ? any ideas?
Fixed
every time i push recovery img twrp via ADB it gets bootloader loop
leerh said:
every time i push recovery img twrp via ADB it gets bootloader loop
Click to expand...
Click to collapse
That's weird, i've uploaded the same img i used on mine smartphone, it reboot twice, but starts after in my case, i just got bootloop after unlock the bootloader, but never after flash the twrp...
Try to turn your phone on holding the vol down button to enter in fastboot and check if it's really unlocked, since you flashed the twrp, you will need it
Btw, try to use the files of this tutorial
Astronomico said:
That's weird, i've uploaded the same img i used on mine smartphone, it reboot twice, but starts after in my case, i just got bootloop after unlock the bootloader, but never after flash the twrp...
Try to turn your phone on holding the vol down button to enter in fastboot and check if it's really unlocked, since you flashed the twrp, you will need it
Btw, try to use the files of this tutorial
Click to expand...
Click to collapse
yhyh it says device is unlocked ive used unlock image from lenovo site to unlock it.
im currently on 11.1.021 st cant install twrp affter installing keeps booting to bootloader (unlocked) from here i will need to use qfill to get stock firmware 10.5.304 cn version stock recovery still works
ive also tried on ZUI_10.5.304 same thing
qill emergency flash dose not lock bootloader for me? well i cant twrps anymore makes me feel its step away from total brick
do i need to lock it then qfill then 11.1.021st via OTA then unlock it
I've Just googled It and i found that flash magisk could repair the twrp bootloop, because magisk changes the boot.img that is the cause of the problem
You can download It on magiskmanager site, put it on your phone, than use twrp install session to flash it
And Qfil doesn't Lock your bootloader
Astronomico said:
I've Just googled It and i found that flash magisk could repair the twrp bootloop, because magisk changes the boot.img that is the cause of the problem
You can download It on magiskmanager site, put it on your phone, than use twrp install session to flash it
And Qfil doesn't Lock your bootloader
Click to expand...
Click to collapse
thanks for looking into it for me and i will try this out now and let you know the results done.
this a fresh from factory flash so there is no magisk modules. can you post the links to the information you found.. i cant flash any files affter installing twrps which is successful the via ADB but affter the reboot or trying twrps or access phone or recovery will bootloop my phone to go into fast boot every single time...
can i install twrps on 10.304 and 11.021 both are offical cn roms? device has to be unlocked right which it is? is there any place i can get stock recovry image?
i wanna try= fastboot flash boot_a stockboot.img=fastboot flash boot_b stockboot.img
but i dont think i should as qfil provides stock factory flash? means its fully fresh?
leerh said:
thanks for looking into it for me and i will try this out now and let you know the results done.
this a fresh from factory flash so there is no magisk modules. can you post the links to the information you found.. i cant flash any files affter installing twrps which is successful the via ADB but affter the reboot or trying twrps or access phone or recovery will bootloop my phone to go into fast boot every single time...
can i install twrps on 10.304 and 11.021 both are offical cn roms? device has to be unlocked right which it is? is there any place i can get stock recovry image?
i wanna try= fastboot flash boot_a stockboot.img=fastboot flash boot_b stockboot.img
but i dont think i should as qfil provides stock factory flash? means its fully fresh?
Click to expand...
Click to collapse
Oh, i thought you could access the twrp after install it, sorry
The tutorial on step 1 provides the official cn rom zui10, if you use it, your phone will probably boot normally.
I think you should lock your bootloader and use the official, you will have the updates via OTA, since you can't use TWRP, I think it will be the best for you, I don't know how help you more :/
I have a request anyone can share with my twrp back up clear update without data like zip file because I have problem with my QFIL and when I try to install zui 10.5 give me sahara error and I thought about this option
brujaboy said:
I have a request anyone can share with my twrp back up clear update without data like zip file because I have problem with my QFIL and when I try to install zui 10.5 give me sahara error and I thought about this option
Click to expand...
Click to collapse
Sorry, i didn't see it, but saraha error is probably caused because wrong version of USB drivers in your PC, or you're being too slow to press "download content" on qfil after plug the phone (I don't know exactly why, but you have to click it fairly fast)
Astronomico said:
Sorry, i didn't see it, but saraha error is probably caused because wrong version of USB drivers in your PC, or you're being too slow to press "download content" on qfil after plug the phone (I don't know exactly why, but you have to click it fairly fast)
Click to expand...
Click to collapse
doesn't matter, thank u so much for replying yesterday I installed all of driver versions but I saw still again and I find another method like pushing very fast download click button and I did successfully 11.1.021 thank u so much again for supporting
Astronomico said:
Obs: these were the steps that i did to get it, try it by your own risk
I did the first part with my bootloader locked, and just got it working this way. I tried to qfil directly the 11.1.021 or use the version updated with the bootloader unlocked but i got error 7 later.
To start, you will need adb and fastboot, and you can get them from here
1- Qfil the zui 10 version from this tutorial
2- Set up a pin (it will be important) and update the zui to version 11.1.021 (right after you install the zui 10 it will pop the update, if not you can use the zui update app)
3- Now that you have 11.1.021 from ota you have to go to fastboot mode (adb reboot bootloader) and unlock your bootloader, if you do this on zui 10 or zui 11.5 you will got on bootloop and have to start all again (tutorial <- you can use this to lock your bootloader for start the proccess too)
4- Go again to bootloader and use fastboot flash recovery twrp.img (download twrp)
5- From fastboot mode, press volume down repeatly until you see "Recovery mode" then press power button, the phone will reboot twice and enter in twrp, you will need to put the pin set on step 2
6- Pass this update zip to your phone from the PC then select it on "install" section and swipe to flash (this was the step where i got error 7 with qfil version of 11.1.021, if you got this, the only solution i know is start all over again owith qfil zui 10)
7- After flash is done, go back to the home page of twrp, select "wipe" and mark "dalvik", "cache" and "data" then reboot system
Your phone will be on bootloop and this is the part that i discover after 2 days trying
8- Turn off your phone and turn it back pressing the power button and the volume down to enter in fastboot mode, you will see on last line that your bootloader will be locked again, and this is the cause of bootloop
9- Use the commands to unlock bootloader again (fastboot flash unlock your_unlock_img.img and fastboot oem-unlock go)
Your phone will boot and reboot in twrp that will do an automatic process, than will reboot again in ZUI 11.5.141 (may take some minutes)
Obs²: After this proccess, if you want to use TWRP to install a rom or something, you will need to flash it again
Click to expand...
Click to collapse
Hi bro. I see a little error in your command: The second command in the 9th step is wrong, the correct command is: "fastboot oem unlock-go".
Greetings.
leerh said:
yhyh it says device is unlocked ive used unlock image from lenovo site to unlock it.
im currently on 11.1.021 st cant install twrp affter installing keeps booting to bootloader (unlocked) from here i will need to use qfill to get stock firmware 10.5.304 cn version stock recovery still works
ive also tried on ZUI_10.5.304 same thing
qill emergency flash dose not lock bootloader for me? well i cant twrps anymore makes me feel its step away from total brick
do i need to lock it then qfill then 11.1.021st via OTA then unlock it
Click to expand...
Click to collapse
i got step 1,2,3,4,5 and 6, got an error #7.
so i used the tutorial to flash the device in step 1
it was unable to update cuz bootloader was unlock
i locked bootloader and update to 11.1.021
so afther that, i unlocked again to install twrp.
intalled twrp and transfer file to phone
booted twrp and installed the zip, got the error 7 again.
lipeneiva said:
i got step 1,2,3,4,5 and 6, got an error #7.
so i used the tutorial to flash the device in step 1
it was unable to update cuz bootloader was unlock
i locked bootloader and update to 11.1.021
so afther that, i unlocked again to install twrp.
intalled twrp and transfer file to phone
booted twrp and installed the zip, got the error 7 again.
Click to expand...
Click to collapse
best thing is to try again an follow every letter and step this only way to install 11.5 (beta) did u set a pin it is needed ive not seen another guide to install android 10
Lombachita said:
Hi bro. I see a little error in your command: The second command in the 9th step is wrong, the correct command is: "fastboot oem unlock-go".
Greetings.
Click to expand...
Click to collapse
Ops, fixed
Sir, i have updated my mi note 10 lite to android 11and after restart it works fine. But the problem is that when i reboot to recovery to install root, because i have installed twrp before. Unfortunately, its stuck on fastboot screen.
Can you help me out to solve this problem.
I tried to flash twrp but its not mounting partition, i reboot to recovery again but its go to fastboot mode again
I tried to flash fastboot rom through mi flash tool it errors because anti rollback.(android 10)
Still i am finding Android 11 fastboot images but not found.
You can contact dennis via Instagram that man reply you
Mi note 10 lite User 😭😭 said:
You can contact dennis via Instagram that man reply you
Click to expand...
Click to collapse
Okay i dm you now check please
haadii said:
Sir, i have updated my mi note 10 lite to android 11and after restart it works fine. But the problem is that when i reboot to recovery to install root, because i have installed twrp before. Unfortunately, its stuck on fastboot screen.
Can you help me out to solve this problem.
I tried to flash twrp but its not mounting partition, i reboot to recovery again but its go to fastboot mode again
I tried to flash fastboot rom through mi flash tool it errors because anti rollback.(android 10)
Still i am finding Android 11 fastboot images but not found.
Click to expand...
Click to collapse
extract the official recovery from the global fastboot rom and flash through cmd to recover the boot, then wipe from the recovery and you will return to miui 12.1.1
what i'm trying to figure out is if i can go back to the previous version of android without risking to crash the device.
I ran the fastboot getvar anti command and the result was Anti: 2 but I am not quite clear what that means.
I am a new user at Xiaomi.
leinadagisiaol said:
what i'm trying to figure out is if i can go back to the previous version of android without risking to crash the device.
I ran the fastboot getvar anti command and the result was Anti: 2 but I am not quite clear what that means.
I am a new user at Xiaomi.
Click to expand...
Click to collapse
I tried it. When flashing fastboot images thorough miflash its error in anti roll back check... Or may your device hard brick
Now i am here with a new fu*kin error..
Any solution for this. I don't want to lose data
If stuck in fastboot mode, type "fastboot continue" in adb and it will proceed with boot
ApexPrime said:
If stuck in fastboot mode, type "fastboot continue" in adb and it will proceed with boot
Click to expand...
Click to collapse
No. Its not my problem now
My problem is mentioned above
Bro i think you can access your files from computer in recovery so make a backup and flash official firmware using miflash tool. I don't think there's any other way.
haadii said:
Now i am here with a new fu*kin error..
Any solution for this. I don't want to lose data
Click to expand...
Click to collapse
Before installing custom recovery and installing custom rom, it is recommended to backup.
You installed the recovery well, but in order to install custom ROMs you have to format and restart the recovery, then pass the ROM you want to flash and reboot system.
haadii said:
I tried it. When flashing fastboot images thorough miflash its error in anti roll back check... Or may your device hard brick
Click to expand...
Click to collapse
I managed to go back to miui 11 version 11.0.8
leinadagisiaol said:
I managed to go back to miui 11 version 11.0.8
Click to expand...
Click to collapse
How?? Can you show or tell me the process!! I don't like Android 11
haadii said:
How?? Can you show or tell me the process!! I don't like Android 11
Click to expand...
Click to collapse
Good evening ..
For all those interested in downloading the official ROM version of the Xiaomi mi note 10 Lite, I have news for you, at least for those who want and have not tried.
I tried the method of saving the MiFlash folder on Disk C, in the same way I did with the global ROM of miui 11.0.8 fastboot, to the latter I changed the name of the folder to a shorter one (example Miui11.0.8), then boot in fastboot mode and run my flash running the ROM (Miui11.0.8) and the result obtained is that, I'm back on Android 10 with miui 11.0.8.
I share this information to give security to all those who had doubts about this and did not dare to try.
This data I extracted from various forums and pointed to it to give credit to all those who previously published it.
Remember that the bootloader must be unlocked.
Regards.
Hi everybody
I've got a problem...
Downloaded latest OTA update from "xiaomi.eu", agreed to install, the phone then rebooted in to fastboot mode and does nothing else.
Rebooted the phone with adb command "fastboot continue" and this went well...it rebooted the system.
Now every time i restart the phone it reboots in to fastboot mode and i have to "fastboot continue" again.
I am also not able to enter recovery because the phone always enters fastboot mode.
Reinstalled recovery (Twrp-3.4.2B_toco_by.alex.msk1407.img) via ADB succesfully, but when i "fastboot reboot recovery" it reboots back into fastboot.
I'm also not able to boot into EDL mode.
Any solution?
Thanks
"MI NOTE LITE 8GB/128GB" running "MIUI by xiaomi.eu 12.1.1 | Stable 12.1.1.0(RFNMIXM)
salsaecoentros said:
Hi everybody
I've got a problem...
Downloaded latest OTA update from "xiaomi.eu", agreed to install, the phone then rebooted in to fastboot mode and does nothing else.
Rebooted the phone with adb command "fastboot continue" and this went well...it rebooted the system.
Now every time i restart the phone it reboots in to fastboot mode and i have to "fastboot continue" again.
I am also not able to enter recovery because the phone always enters fastboot mode.
Reinstalled recovery (Twrp-3.4.2B_toco_by.alex.msk1407.img) via ADB succesfully, but when i "fastboot reboot recovery" it reboots back into fastboot.
I'm also not able to boot into EDL mode.
Any solution?
Thanks
"MI NOTE LITE 8GB/128GB" running "MIUI by xiaomi.eu 12.1.1 | Stable 12.1.1.0(RFNMIXM)
Click to expand...
Click to collapse
Just format userdata. In fastboot mode command. Fastboot format userdata
Then flash new stock fastboot images of eu in miflash.
Note,
Backup your data first
Good Day. I have concern but after updating to Android 12. Currently my Mi Note 10 Lite is experiencing stuck in fastboot and mi logo. I already tried flashing using MIFlash 2020 but the error occur is "Erase is not allowed in Lock State".I also used MI PC Suite but it cant read my device (maybe because of lock state also). Even in MI-Unlock (batch_unlock application) it says its locked but when I sign-in it doesnt give permission to unlock (I used yahoo account).
goroshigeno56 said:
Good Day. I have concern but after updating to Android 12. Currently my Mi Note 10 Lite is experiencing stuck in fastboot and mi logo. I already tried flashing using MIFlash 2020 but the error occur is "Erase is not allowed in Lock State".I also used MI PC Suite but it cant read my device (maybe because of lock state also). Even in MI-Unlock (batch_unlock application) it says its locked but when I sign-in it doesnt give permission to unlock (I used yahoo account).
Click to expand...
Click to collapse
did you fix that problem?