Related
Hi guys this is Axan
today i decided to upload stock Recovery for Mate10 Lite/Nova 2i/Honor 9i
Flash it through fastboot :
Code:
fastboot flash recovery recovery.img
Download link:
https://mega.nz/#!sWxWHIJA!6UqsQXWO7hLTXwx1PDScOQnXeX8vff4duN8_FkRiBt0
Do not forget to hit thanks button
thanks axan
what model is it for ?
phileg said:
what model is it for ?
Click to expand...
Click to collapse
Sould work for all RNE phones
Thank you so much you made my day
anyone tried this? for those who rooted their phones, were you able to update tru OTA by going back to stock recovery?
rendar123 said:
anyone tried this? for those who rooted their phones, were you able to update tru OTA by going back to stock recovery?
Click to expand...
Click to collapse
Hello
Yes,
* he downloads ota-mf.
But, it does not install error authentication.
Chisetdel31260 said:
Hello
Yes,
* he downloads ota-mf.
But, it does not install error authentication.
Click to expand...
Click to collapse
i see. the only way to update our rooted phone without error is to wait for huawei to release full OTA. tsk.
rendar123 said:
i see. the only way to update our rooted phone without error is to wait for huawei to release full OTA. tsk.
Click to expand...
Click to collapse
yes.
Guys,
I have a problem with my Mate 10 lite RNE -L21C432B130 (located Latvia), can anyone make a backup in TWRP -modem_fw, -modem_om, -modem_secure, -modemnvm_img. I don't have signal "No Service" after flashing CN full board firmvare with DC phoenix. But I restore my phone with Flasheables-Huawei Mate 10 Lite All Models. Phone booting without network, showing -No Service, only Emergency call. Did samebody have same problem? My now Baseband version - 21C60B265S000C000,21C60B265S000C000
Sorry for my English.
Serjega said:
Guys,
I have a problem with my Mate 10 lite RNE -L21C432B130 (located Latvia), can anyone make a backup in TWRP -modem_fw, -modem_om, -modem_secure, -modemnvm_img. I don't have signal "No Service" after flashing CN full board firmvare with DC phoenix. But I restore my phone with Flasheables-Huawei Mate 10 Lite All Models. Phone booting without network, showing -No Service, only Emergency call. Did samebody have same problem? My now Baseband version - 21C60B265S000C000,21C60B265S000C000
Sorry for my English.
Click to expand...
Click to collapse
Hi bro
In about phone
Does it show your imei???
Serjega said:
Guys,
I have a problem with my Mate 10 lite RNE -L21C432B130 (located Latvia), can anyone make a backup in TWRP -modem_fw, -modem_om, -modem_secure, -modemnvm_img. I don't have signal "No Service" after flashing CN full board firmvare with DC phoenix. But I restore my phone with Flasheables-Huawei Mate 10 Lite All Models. Phone booting without network, showing -No Service, only Emergency call. Did samebody have same problem? My now Baseband version - 21C60B265S000C000,21C60B265S000C000
Sorry for my English.
Click to expand...
Click to collapse
Here i wrote a solution
In third post
Do it may fix your problem
https://forum.xda-developers.com/8-lite/development/rebrand-to-cn-t3735356/post75205670
Axan said:
Here i wrote a solution
In third post
Do it may fix your problem
https://forum.xda-developers.com/8-lite/development/rebrand-to-cn-t3735356/post75205670
Click to expand...
Click to collapse
Yes before, I restore my IMEI (two), SN with HCU. Put location -EU, vendor -hw. Now I cheking and found CUST without CN, already EU.
Serjega said:
Yes before, I restore my IMEI (two), SN with HCU. Put location -EU, vendor -hw. Now I cheking and found CUST without CN, already EU.
Click to expand...
Click to collapse
Ok so restore twrp backup
In oeminfo and backup thread
Axan said:
Ok so restore twrp backup
In oeminfo and backup thread
Click to expand...
Click to collapse
Now I install full OTA RNE-L21C432B134 by eRecovery. Phone now whithout "Warning" in the boot, clean. But problem still same, No my provider network from my region. I think need right CUST.
Serjega said:
Now I install full OTA RNE-L21C432B134 by eRecovery. Phone now whithout "Warning" in the boot, clean. But problem still same, No my provider network from my region. I think need right CUST.
Click to expand...
Click to collapse
In eRECOVERY itself found firmware and you installed it??
Axan said:
In eRECOVERY itself found firmware and you installed it??
Click to expand...
Click to collapse
No?, with FF DNS.
PurpleStrawberry
·1m
I just performed my update here in the US (California). Does anyone know when it will be possible to have 4G/lte on the network? I have very slow internet (when I am not on the WIFI) as I only have 2G/Edge at the moment, for some reason MetroPCS is not compactable with Huawei 10 mate lite.
Thanks for any feedback
Is this recovery.img compatible with Huawei Mate 10 Pro BLA-L29 C432 ?
mkoijnbhu said:
Hi guys this is Axan
today i decided to upload stock Recovery for Mate10 Lite/Nova 2i/Honor 9i
Flash it through fastboot :
Code:
fastboot flash recovery recovery.img
Download link:
https://mega.nz/#!sWxWHIJA!6UqsQXWO7hLTXwx1PDScOQnXeX8vff4duN8_FkRiBt0
Do not forget to hit thanks button
Click to expand...
Click to collapse
Cannot flash any recovery in fastboot now.
Below is the error message.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery_ramdisk twrp.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (25568 KB)...
OKAY [ 0.670s]
writing 'recovery_ramdisk'...
FAILED (remote: partition length get error)
finished. total time: 0.684s
my phone is RNE-L21C185 i'm use firmware finder and update the oreo update of RNE-L22C636 and after it finish it restart and setup successfully to 100% and then restart into huawei Erecovery and i factory reset and every time i turn on the phone it open huawei Erecovery . i ask for solution ?? and i think i need rollback package but i search and didn't found
Same here
Tried the factory reset, "download latest version and recovery", nothing helped
try letting it reboot a whole bunch of times and the factory reset option should appear in recovery
try flashing stock recovery_ramdisk if it doesn't
WaxysDargle said:
try letting it reboot a whole bunch of times and the factory reset option should appear in recovery
try flashing stock recovery_ramdisk if it doesn't
Click to expand...
Click to collapse
That would require the bootloader to be unlocked right?
I'm not finding a solution, i'm considering sending my unit to warranty
Ok
I can answer your concern ... but if you breathe and relax before writing ... I do not fully understand what you have done ...
But you gave me to understand that without making a Rebrand in your RNE-L21C185 to the RNE-L22C636 version try to install the OREO version of this last ... L22? this is true.
Besho Gemo said:
my phone is RNE-L21C185 i'm use firmware finder and update the oreo update of RNE-L22C636 and after it finish it restart and setup successfully to 100% and then restart into huawei Erecovery and i factory reset and every time i turn on the phone it open huawei Erecovery . i ask for solution ?? and i think i need rollback package but i search and didn't found
Click to expand...
Click to collapse
emorenoebultron said:
I can answer your concern ... but if you breathe and relax before writing ... I do not fully understand what you have done ...
But you gave me to understand that without making a Rebrand in your RNE-L21C185 to the RNE-L22C636 version try to install the OREO version of this last ... L22? this is true.
Click to expand...
Click to collapse
yes my region was RNE-L21C185 and i searched in firmware finder under another region RNE-L22C636 and update phone from RNE-L22C636 now i can't open phone always get recovery mode like photo
First rebrand
Besho Gemo said:
yes my region was RNE-L21C185 and i searched in firmware finder under another region RNE-L22C636 and update phone from RNE-L22C636 now i can't open phone always get recovery mode like photo
Click to expand...
Click to collapse
Well, in no way can you install a firmware version from one region to another without doing the Rebrand, that's why your device is in erecovery mode ... because the OEIMFO of the RNE-L21C185 is not compatible with the RNE-L22636 firmware ... if you want to install you should first do a rebrand ... otherwise you can not do anything.
emorenoebultron said:
Well, in no way can you install a firmware version from one region to another without doing the Rebrand, that's why your device is in erecovery mode ... because the OEIMFO of the RNE-L21C185 is not compatible with the RNE-L22636 firmware ... if you want to install you should first do a rebrand ... otherwise you can not do anything.
Click to expand...
Click to collapse
can you tell me how to do a rebrand
Ok
Besho Gemo said:
can you tell me how to do a rebrand
Click to expand...
Click to collapse
You have the bootloader code of your device.
emorenoebultron said:
You have the bootloader code of your device.
Click to expand...
Click to collapse
yes .. but i can't open the phone to turn on oem
Hello,
I come to ask you for help.
I have some problems with my Huawei Mate 10 Pro, I installed the phhusson ROM AOSP 8.1. No problem. But I'd like to go back to Stock, but I can not finish the installation with the HWOTA method.
I always have a problem of memory space while there is nothing on it.I have TWRP and the bootloader unlocked. I do not understand...
oh and i forgot to do backup like an idiot...
My model : BLA-L29 C432
Thanks in advance and sorry for my english
I finally succeeded !!!
I finally succeeded !!!
How you did ?
Sent from my [device_name] using XDA-Developers Legacy app
can you please teach me?
babadaba said:
can you please teach me?
Click to expand...
Click to collapse
l guess you have twrp as recovery… if so, use hurupdater 0.3 to go back to stock… done!
Here you are: https://www.google.com/amp/s/forum....lash-official-firmware-recovery-t3769279/amp/
Thanks for your quick reply.will report back the result ASAP.cheers mate!
manager77 said:
l guess you have twrp as recovery… if so, use hurupdater 0.3 to go back to stock… done!
Here you are: https://www.google.com/amp/s/forum....lash-official-firmware-recovery-t3769279/amp/
Click to expand...
Click to collapse
i looked into the huruupdater 0.3.
here is the result,
i still failed to restore my phone back to stock. this what i did:
downloaded FullOTA-MF from Firmware Finder APP
put all the three .zip file in the same folder with huruupdater 0.3
launch TWRP recovery and run hurupdater 0.3
flashing process encountered some red colored error.
i suspect maybe the twrp does not support OREO 8.1.0 custom ROM.
what do you suggest i do next?
babadaba said:
i looked into the huruupdater 0.3.
here is the result,
i still failed to restore my phone back to stock. this what i did:
downloaded FullOTA-MF from Firmware Finder APP
put all the three .zip file in the same folder with huruupdater 0.3
launch TWRP recovery and run hurupdater 0.3
flashing process encountered some red colored error.
i suspect maybe the twrp does not support OREO 8.1.0 custom ROM.
what do you suggest i do next?
Click to expand...
Click to collapse
Did you rename the .zip files accordingly?
update.zip
update_all_hw.zip
update_data_public.zip
Where did you find HWOTA for mate 10 pro?
Mate 10. So, I tried to install the latest EMUI version using HuRUpdater - bad idea. Now, my phone will not boot. I can enter EMUI Recovery Mode but when I try to receive download package, it says it can't be retrieved. I can also enter Fastboot Mode but the problem with that is that under Device Manager, it only gets recognized as, "Android Bootloader Interface."
Please, any help would be greatly appreciated.
edit: So, fastboot DOES work. What files from what version do I flash to return to stock recovery? I don't even know if Pie was actually written to the device or not before the device rebooted and wouldn't boot.
edit again: I have just successfully installed TWRP via fastboot but it hangs at startup screen - is this because it's not compatible with Pi?
So I've tried flashing ramdisk_recovery.img, kernel.img and system.img from the Pi version but I still can't factory reset the phone. It boots back to the white screen with the android dude and says, "Please update system again."
Any help would be appreciated...
Using Multi-Tool, it detects my device in Fastboot mode as still 8.0.0.143. So, I'm trying to flash System, Ramdisk, Cust, Recovery_Ramdisk and Userdata......all succeed, except one - Ramdisk.img. When I manually try to flash Ramdisk.img in command prompt, it also fails, "FAILED (remote: partition length get error)". In Multi-tool, the error is, "the size or path does not match the file system markup."
Please, does anyone have any other suggestions? I've been at this for nearly 12 hours straight.
I assume u have unlocked bootloader and frb unlocked too if both yes u can search in xda for zip file beta downy 0.4
It will help you to downgrade emui 9 to. Emui 8
If u have unlocked bootloader only I guess u need funky huawei to restore ur devise
I hope I did helped u
Thanks for the reply.
My bootloader is unlocked but how do I know if I have unlocked FRP?
And downy tool requires ADB but I can only access Fastboot.
edit: I just checked and my FRP is also unlocked. What now?
Tried Funky Huawei just now, no go. Still get package can't be received error in ERecovery after following all of the instructions. Have emailed them as that's what they suggest doing if it didn't work.
Not sure what else to try to be honest. How the hell does updating my phone from 8.0.0.143 to 9.0.0.159 with HuRUpdate brick my phone? Ffs.
essen212 said:
Tried Funky Huawei just now, no go. Still get package can't be received error in ERecovery after following all of the instructions. Have emailed them as that's what they suggest doing if it didn't work.
Not sure what else to try to be honest. How the hell does updating my phone from 8.0.0.143 to 9.0.0.159 with HuRUpdate brick my phone? Ffs.
Click to expand...
Click to collapse
Well, it happened because HuRUpdater it's not supported on EMUI 9.0.
Ramdisk fails to flash because even if in fastboot your device is showing as 8.0.0.143, it has EMUI 9's partition layout, so no more ramdisk partition.
Try flashing a firmware with the DLOAD method (search on androidhost.ru for a firmware designed for your device/cust).
Pretoriano80 said:
Well, it happened because HuRUpdater it's not supported on EMUI 9.0.
Ramdisk fails to flash because even if in fastboot your device is showing as 8.0.0.143, it has EMUI 9's partition layout, so no more ramdisk partition.
Try flashing a firmware with the DLOAD method (search on androidhost.ru for a firmware designed for your device/cust).
Click to expand...
Click to collapse
Damn. Well, that makes perfect sense. A question - do I flash the 9.0.0 version or 8.0.0.143 version?
essen212 said:
Damn. Well, that makes perfect sense. A question - do I flash the 9.0.0 version or 8.0.0.143 version?
Click to expand...
Click to collapse
Try with EMUI 9 first, then, if it fails, try Oreo. The most important part is finding a DLOAD firmware for your cust/region.
I've fixed it!
Funky emailed me back and I ended up using a different method on their site which worked like a charm. I couldn't recommend them enough.
Hi, good to hear you got it sorted! Would you mind sharing the details on what you had to do differently with FHC? I'm in the same boat here with a mate 10 pro that died on emui9 and I'm not sure if I should go the FHC way or not...
Thx - David
Currently on EMUI 8 and looking to update to EMUI 9 but I still haven't received the update. Looking to use the dload method maybe.
I'm on ALP-L09 8.0.0.137 (C212) but it's a custom version I believe. It says "Custum version: CUSTC212D001"
I was wondering if I could download ALP-L09 9.0.0.159 (C212) from FirmwareFinder (Says it's not approved for installation even though it's the same region, probably because I have a custom version from my cellphone provider AT&T Mexico) and install it via the dload method.
Would this brick my phone and how would I do the dload method exactly?
I'm on the same boat, and 159 has been in FF for over a month now only in FullOTA. Pinche ATT nunca aprueba rápido las cosas....
ShadowFlame303 said:
Currently on EMUI 8 and looking to update to EMUI 9 but I still haven't received the update. Looking to use the dload method maybe.
I'm on ALP-L09 8.0.0.137 (C212) but it's a custom version I believe. It says "Custum version: CUSTC212D001"
I was wondering if I could download ALP-L09 9.0.0.159 (C212) from FirmwareFinder (Says it's not approved for installation even though it's the same region, probably because I have a custom version from my cellphone provider AT&T Mexico) and install it via the dload method.
Would this brick my phone and how would I do the dload method exactly?
Click to expand...
Click to collapse
You can't install regular updates as dload. You would need service firmware from androidhost.ru
ante0 said:
You can't install regular updates as dload. You would need service firmware from androidhost.ru
Click to expand...
Click to collapse
Can't seem to find a file with the right model/region on the website but if I do, how would I go about doing the dload method?
ShadowFlame303 said:
Can't seem to find a file with the right model/region on the website but if I do, how would I go about doing the dload method?
Click to expand...
Click to collapse
Extract the downloaded zip. Go into the Software folder, copy 'dload' folder to the root of a micro sd. Put micro sd in your phone, reboot while holding vol up + down. This will put you in dload mode where update will start (takes a while).
Alternatively you can open dialer app and enter:*#*#2846579#*#*, this will open Projectmenu. Tap on Software upgrade, SD Upgrade, 'yes'. Phone will reboot to dload mode and start update.
@ante0 i have usa version and it doesnt have microsd slot, i was able to download full rom from ff along with data rom as well, i extracted update.app, now do i have to flash each partition seperately or just system and i have no clue what those commands are, i have tried it with usb otg and dialer pad method but it said install failed, i also registered it in ff and tried erecovery method but my phone does not boot to erecovery only regular recovery, i can boot to fastboot fine, this phone was never bl unlocked, any ideas on how to proceed.
lingarajug said:
@ante0 i have usa version and it doesnt have microsd slot, i was able to download full rom from ff along with data rom as well, i extracted update.app, now do i have to flash each partition seperately or just system and i have no clue what those commands are, i have tried it with usb otg and dialer pad method but it said install failed, i also registered it in ff and tried erecovery method but my phone does not boot to erecovery only regular recovery, i can boot to fastboot fine, this phone was never bl unlocked, any ideas on how to proceed.
Click to expand...
Click to collapse
It doesn't work with firmware from FF. Those are online only.
What happens if you boot device and hold volume up after the Huawei logo?
@ante0 i have tried that and the phone just boots regularly.
lingarajug said:
@ante0 i have tried that and the phone just boots regularly.
Click to expand...
Click to collapse
USB + vol up then?
ante0 said:
USB + vol up then?
Click to expand...
Click to collapse
It goes into normal recovery not erecovery, i am on 129 december security update.
ante0 said:
Extract the downloaded zip. Go into the Software folder, copy 'dload' folder to the root of a micro sd. Put micro sd in your phone, reboot while holding vol up + down. This will put you in dload mode where update will start (takes a while).
Alternatively you can open dialer app and enter:*#*#2846579#*#*, this will open Projectmenu. Tap on Software upgrade, SD Upgrade, 'yes'. Phone will reboot to dload mode and start update.
Click to expand...
Click to collapse
So I cant find firmware with my same region (C212) but could I still install firmware for the same model (ALP-L09) but different region? This one for example: Huawei Mate 10 orange all HLRCF ALP-L09 9.0.0.161(C109E4R1P9T8) Firmware 9.0.0 r3 EMUI9.0.0 05014VKY [androidhost.ru].zip
ShadowFlame303 said:
So I cant find firmware with my same region (C212) but could I still install firmware for the same model (ALP-L09) but different region? This one for example: Huawei Mate 10 orange all HLRCF ALP-L09 9.0.0.161(C109E4R1P9T8) Firmware 9.0.0 r3 EMUI9.0.0 05014VKY [androidhost.ru].zip
Click to expand...
Click to collapse
Not without rebranding. Which you would have to unlock to do. (or pre-june firmware where dc is not patched)
ante0 said:
Not without rebranding. Which you would have to unlock to do. (or pre-june firmware where dc is not patched)
Click to expand...
Click to collapse
Oh, nice to know. Since I can't find firmware for my region on androidhost, do you know of any other websites where I could find C212 firmware?
ShadowFlame303 said:
Oh, nice to know. Since I can't find firmware for my region on androidhost, do you know of any other websites where I could find C212 firmware?
Click to expand...
Click to collapse
Would this file work/website work? https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=139570
ante0 said:
Extract the downloaded zip. Go into the Software folder, copy 'dload' folder to the root of a micro sd. Put micro sd in your phone, reboot while holding vol up + down. This will put you in dload mode where update will start (takes a while).
Alternatively you can open dialer app and enter:*#*#2846579#*#*, this will open Projectmenu. Tap on Software upgrade, SD Upgrade, 'yes'. Phone will reboot to dload mode and start update.
Click to expand...
Click to collapse
But the update.app size to large cannot copy to SD card
rickyselva007 said:
But the update.app size to large cannot copy to SD card
Click to expand...
Click to collapse
U need to format sdcard with exfat not fat32 file system due to file size restriction of 4gb for fat32 and NTFS won't work as android cant read.
Pie
ShadowFlame303 said:
Currently on EMUI 8 and looking to update to EMUI 9 but I still haven't received the update. Looking to use the dload method maybe.
I'm on ALP-L09 8.0.0.137 (C212) but it's a custom version I believe. It says "Custum version: CUSTC212D001"
I was wondering if I could download ALP-L09 9.0.0.159 (C212) from FirmwareFinder (Says it's not approved for installation even though it's the same region, probably because I have a custom version from my cellphone provider AT&T Mexico) and install it via the dload method.
Would this brick my phone and how would I do the dload method exactly?
Click to expand...
Click to collapse
No, you can't just download and install it that way first off it is not approved which means your stock recovery won't install it, second there is no "dload" method for upgrades, that only works for service ROMs, and third, if your phone has a carrier provided ROM that is customized, updates will come from the carrier.
---------- Post added at 12:30 PM ---------- Previous post was at 12:27 PM ----------
ShadowFlame303 said:
So I cant find firmware with my same region (C212) but could I still install firmware for the same model (ALP-L09) but different region? This one for example: Huawei Mate 10 orange all HLRCF ALP-L09 9.0.0.161(C109E4R1P9T8) Firmware 9.0.0 r3 EMUI9.0.0 05014VKY [androidhost.ru].zip
Click to expand...
Click to collapse
Nope, doesn't work that way, to use a different region ROM you would have to rebranding your phone to another region.
rickyselva007 said:
But the update.app size to large cannot copy to SD card
Click to expand...
Click to collapse
dload firmware has a sd_update.zip in it. That one you don't extract.
regular update.zip will not work with dload.
ShadowFlame303 said:
Would this file work/website work? https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=139570
Click to expand...
Click to collapse
It's probably the same as the one on FF. So might be a waste of money as you have to pay for it.