[request][root][j600g][q] - Samsung Galaxy J6 Questions & Answers

J6OOG updated to the last version (android 10)
stucks in boot after flashing TWRP and MAGISK
Is there a way to root it. . . .
NB: Iwas on PIE(9) ..and rooted by magisk. .
THANK's. . .

---

after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK

---

Did you patch the file with the same device which you used it or two different devices?
Well, i got it and it works.
Uses the magisk_patched.tar from the same device which i wanted to root.
And with a clean odin installation that should work.

---

bombername said:
Did you patch the file with the same device which you used it or two different devices?
Well, i got it and it works.
Uses the magisk_patched.tar from the same device which i wanted to root.
And with a clean odin installation that should work.
Click to expand...
Click to collapse
AP file patched with the same device....
four files flashed with Odin....
For information are you rooted now ?....

---

Yes, I have root now.

---

bombername said:
Yes, I have root now.
Click to expand...
Click to collapse
Glad to know that . . .

---

it worked bro very thanks.

---

I rooted my device too but only boot.tar used....
Not all AP files...
But I had a problem ... is that I cannot delete system files using link2sd or any other application .... I don't know what the problem is .... if the problem doesn't with you ... please let us know ?

---

THANKS
Thanks bro, you really help me!

---

santebien said:
after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK
Click to expand...
Click to collapse
Does this mean that I will never be able to use twrp recovery...is there no other way to use twrp recovery

---

santebien said:
after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK
Click to expand...
Click to collapse
THANKS MAN FINALLY same here 1 month searching finally doing this method works and i guess shold work for every device, just look for your exact rom firmware. and do the same procedure thought Odin paste the AP COPIED FROM MAGISTIK AND YOU ARE ROOTED its workin on Model SAMSUNG j600G PERFECTLY , ANY HELP IM HERE TO HELP

---

josephpatrick said:
Does this mean that I will never be able to use twrp recovery...is there no other way to use twrp recovery
Click to expand...
Click to collapse
YES THERE IS A WAY . I HAVE TWRP , MAGISK AND A CUSTOME ROM ANDROID 9 I FOUND HERE WITH AWESOME KERNEL AND OFFICIAL PIE 9 , IM HERE TO HELP