Hi all,
the USB connection on my mobile Samsung G965F is dead. I have exchanged the USB board already but to no avail.
Connection to PC in recovery or download mode is equally impossible
I wanted to flash TWRP through stock ROM recovery mode but wasn't successful.
Question: is it possible at all to flash TWRP from stock ROM recovery mode ?
Or is there any other way to flash TWRP without needing the USB connector ?
Thanks in advance for any help !
Best regards
Peter
Related
Hi
I have the AT&T version of S2 i777. The USB port can be used for charging but it is not recognized on PC - windows( to use ODIN). I had taken it to samsung showroom and they said it would cost 60$ to replace the USB port (which would solve the problem).
The problem is that while I was flashing CUSTOM rom, the phone shut down in between and since then I can't boot up my S2. I cannot enter the recovery mode. I can enter download mode but that's of no use to me as I cant use ODIN (since the USB is not working).
Is there any way to use external SD card to force the S2 to enter recovery mode and then use the same sd card to flash a custom ROM. - basically flash a ROM without using ODIN or USB port.
Hope the question and problem is clear.
Please help me out.
Thanks
farhanzakri said:
Hi
I have the AT&T version of S2 i777. The USB port can be used for charging but it is not recognized on PC - windows( to use ODIN). I had taken it to samsung showroom and they said it would cost 60$ to replace the USB port (which would solve the problem).
The problem is that while I was flashing CUSTOM rom, the phone shut down in between and since then I can't boot up my S2. I cannot enter the recovery mode. I can enter download mode but that's of no use to me as I cant use ODIN (since the USB is not working).
Is there any way to use external SD card to force the S2 to enter recovery mode and then use the same sd card to flash a custom ROM. - basically flash a ROM without using ODIN or USB port.
Hope the question and problem is clear.
Please help me out.
Thanks
Click to expand...
Click to collapse
no external Sdcard can force your phone to recovery mode AFAIK, i think u have to go for a USB flex board replacement
I am guessing USB port was broken before the rom flashing . I can't see how a flashing gone wrong can damage usb flex . other than that usb flex replacement is quite common ..
Hey guys,
I was trying to install Resurrection Remix (coming from NeatROm). Originally had TWRP recovery, but NeatROM left me with PHILZ recovery. I then installed CWM, and after some googling, found that TWRP is recommended over CWM. So I flashed TWRP recovery, and now my phone won't boot (stuck on boot logo), and I can't access recovery mode, only download mode. Drats!!!
If anyone can help me, I'd really appreciate it!!!!!
Thanks!!
Guit4eva said:
Hey guys,
I was trying to install Resurrection Remix (coming from NeatROm). Originally had TWRP recovery, but NeatROM left me with PHILZ recovery. I then installed CWM, and after some googling, found that TWRP is recommended over CWM. So I flashed TWRP recovery, and now my phone won't boot (stuck on boot logo), and I can't access recovery mode, only download mode. Drats!!!
If anyone can help me, I'd really appreciate it!!!!!
Thanks!!
Click to expand...
Click to collapse
just download your firmware from sammobile . com and flash it with odin..it should work
FDiHD said:
just download your firmware from sammobile . com and flash it with odin..it should work
Click to expand...
Click to collapse
Unfortunately, my PC or ODIN won't recognize my S2 When I plug it in (in Download Mode), it says USB device not recognized. I've tried downloading drivers, different USB cables and different computers. Drats.... Any suggestions?
Ah!! Had to use USB 2.0 !!!! WOOOOOO, all working again!!
Guit4eva said:
Unfortunately, my PC or ODIN won't recognize my S2 When I plug it in (in Download Mode), it says USB device not recognized. I've tried downloading drivers, different USB cables and different computers. Drats.... Any suggestions?
Click to expand...
Click to collapse
1. Put it in Download mode
2. Plug in to your PC
3. Take out the battery (you can put the battery back when odin recognized it)
try this
HI guys,
I have a problem with my I9300. I tried flash new one TWRP over TWRP Flash image. Something goes wrong and now I am not able to flash anything. Odin and Kies cannot see my phone (unspecified device). I am not able to get into recovery. I am able only to get into download mode and odin mode. Can someone help me with it ?
If Odin can not see the phone, try different usb cables and ports.
I tried a lot of cables (Samsung Original), but no one works. PC detect my phone like unspecified device. I also installed all samsung USB drivers. USB connector has been cleaned. Still nothing works :/
IT works I flashed TWRP via ODIN. Thanks a lot.
hello .
I have a problem after flashing this rom.
I flash the rom via usb burning tool.
but at the moment to remove the bootloader, the box is disconnected from the pc and so there was an error message.
since, I have no more signal on the hdmi of my television!
I managed to flash the rom again but nothing to do, still no hdmi signal.
Do you have a solution?
PS: Would it be possible to have a link to a stock rom to restore everything again? thank you .
EDIT: i have flashed a stock firmware and the CVBS (av) signal work but the hdmi dont work animore!
up, noting?
Same problem here... someone could help? No Screen , tried to unbrick by flashing stock Firmware via Burn Card Maker and USB Burning Tool.
Have no Logo Screen, no Recovery screen , nothing...
:/ TeVioN
Use this
https://forum.xda-developers.com/an...m-xtmod-atv-x96-max-gt1-u211-devices-t3892273
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
hitreca said:
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
Click to expand...
Click to collapse
hi, i would reccomend my android TV 7 ROM for nexbox a95x devices, fast & stable, as for device not being detected by burn tool, you've tried multiple ports on your PC & box?
It will be nice if you can provide me a stable rom for my A95x
Can you please provide me some link to download it.
About the burning tool and the ports....i have 2 USB ports. I've try in both of them. In one of the port i'm managing to connect it to the burning tool but after few minutes i'm loosing the connection for unknown reason for me. I'm suspecting that maybe due to a issue with the images with which i try to install with the USB burning tool.
In the video description there is download link for S905X, There is a Nexbox specific version (so the IR remote control & sleep works)
Download
hitreca said:
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
Click to expand...
Click to collapse
I had no problem to install atvx into exactly same device.
Keep a95x disconnected from everything. Press AV button and hold it while you plug usb cable to right usb port. You mustn't plug power cable. Only usb.
You windows will connect to a95x if amlogic tool is running
And if that dosntvwork then you may need to use mask rom mode to force burning tool to see the device
aidanmacgregor said:
In the video description there is download link for S905X, There is a Nexbox specific version (so the IR remote control & sleep works)
Download
Click to expand...
Click to collapse
Hi Aidan, I flashed my a95x 2/16 with your rom and it’s just stuck on boot screen, when I try flash again it fails with usb burning tool, any suggestions?