IF YOU'RE COMING FROM ANOTHER THREAD OR SITE, AND RUNNING THESE MODULES ON A DEVICE OTHER THAN A 3/3T, DON'T POST YOUR ISSUES HERE!
THESE WERE STRICTLY CONFIGURED FOR THE 3/3T ON OXYGEN OS!
Here are a few I've put together after snooping around the OnePlus threads and converting various mods into modules.
These modules WILL NOT work on Magisk builds older than 13.
I have a folder of modules for Magisk 11 and older (no longer maintained, nor supported) at the end of this post.
Requirements:
- Stock OxygenOS 4.1.6, Open Beta 12, or newer.
- Magisk 13.3 installed by following the installation guide: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
After installing, download any module and flash in TWRP.
NOTE: None of these modules are SystemUI or framework mods as doing such have potential to cause soft bricking, leading to doing a factory reset.
Magisk modules
Google Pixel Launcher with Essentials and Extras v2.0
Includes Pixel Launcher, along with the Google's Wallpaper Picker, and the Live Wallpapers APKs from the Google's Pixel factory image.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated Pixel Launcher to 7.1.13862848
- Updated Nexus Launcher Icons to 7.1.2
- Updated Google Wallpaper Images to 20161104_RC01
- Updated Wallpapers to 1.1.153125266
- Updated Live Earth Wallpapers to 7.1.2
- Updated Live Data Wallpapers to 7.1.2
-----------------------------------------------------------------------------------------
Google Pixel Sound Set v2.0
Replaces the stock OnePlus UI, alarm, notification, and ringtone sounds with the set from the Pixel phone.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated sounds to match the Android O beta image for Google Pixel.
-----------------------------------------------------------------------------------------
Google Dialer with CallerID and Lookup v2.1
Google Dialer, along with the permissions XMLs and required framework to allow full functionality, including Caller ID and Lookup. Be sure to disable the stock OnePlus Dialer, and set Google Dialer as default.
v2.1 Changelog:
- Replace OPSystemUI with a blank template for Magisk as recent versions of OOS causes conflict with Google Dialer's Answer/Decline buttons.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated Google Contacts to 2.0.10
- Updated Google Dialer to 10.1.161735957
-----------------------------------------------------------------------------------------
Google Daydream VR v2.0
Allow the use of using Daydream VR, and enables downloading of additional Daydream apps from the Play Store.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- android.hardware.vr.high_performance.xml (taken from a factory image for the Google Pixel) is now included
instead of editing another XML with the needed entries
-----------------------------------------------------------------------------------------
Chrome Home Page Button v2.0
Enables the home button in Chrome, and an option to set a default home page in Chrome's Settings.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Display SELinux Status (Enforcing/Permissive) v2.1
Expose the status of SELinux (Enforcing or Permissive) at the bottom of Settings > About Phone.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
EmojiOne Emoji Set v2.0
Swap the default emoji set from OnePlus with the ones from EmojiOne.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated the emoji set to 3.1.1 (July 12, 2017)
-----------------------------------------------------------------------------------------
Android O Emoji Set v2.1
Swap the default emoji set from OnePlus with the ones from Android O.
v2.1 Changelog:
- Updated the emoji set with the ones from Android O Developer Preview 4.
More information about the changes here on Android Police.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
2.4GHz WiFI Channel Bonding v2.0
As OnePlus (still) haven't fixed this, the module combines two 20MHz channels on a 2.4GHz WiFi connection into one for improved Internet speed.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Allow AudioServer/MediaServer Access v2.1
Apps such as ViPER4Android needs access to AudioServer (or MediaServer in other ROMs) to work correctly, while the kernel is set to Enforcing.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated the script to execute sepolicy-inject in the new location with Magisk 13.1+ (again...)
Update: Removed. No longer needed since this module was added back into the ViPER4Android packs.
Update 2: Restored.
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
ViPER4Android FX 2.3.4.0 (Super High Quality) v2.1
Not much to say about this module, except that this version, in my opinion, is the last version which allows selecting 3 different quality drivers. This one runs the Super High Quality driver.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Removed the sepolicy-inject script in favor of a separate module (Allow AudioServer/MediaServer Access) for easier maintenance
v2.1 Changelog:
- Re-added the AudioServer/ModuleServer script into this module since for some reason, having it separate was causing devices to not boot.
- There is no need to use Allow AudioServer/MediaServer Access with this module.
-----------------------------------------------------------------------------------------
ViPER4Android FX 2.3.4.0 (Super High Quality) with Dolby Atmos 6.5 v2.1
Same as the ViPER4Android module above, except this one includes Dolby Atmos 6.5.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Removed the sepolicy-inject script in favor of a separate module (Allow AudioServer/MediaServer Access) for easier maintenance
v2.1 Changelog:
- Re-added the AudioServer/ModuleServer script into this module since for some reason, having it separate was causing devices to not boot.
- There is no need to use Allow AudioServer/MediaServer Access with this module.
-----------------------------------------------------------------------------------------
NEW
ViPER4Android FX 2.5.0.5 Base v2.5
This module installs the needed files for use with ViPER4Android version 2.5.0.5. A version 2.5.0.5 app of ViPER4Android (Original or Materialized) must be sideloaded as it is not included in this module.
More information here: https://forum.xda-developers.com/showpost.php?p=73357433&postcount=450
v2.5 Changelog:
- Initial release
-----------------------------------------------------------------------------------------
NEW
ViPER4Android FX 2.5.0.5 Base with Dolby Atmos 6.5 v2.5
This module installs the needed files for use with ViPER4Android 2.5.0.5, and also installs Dolby Atmos 6.5. A version 2.5.0.5 app of ViPER4Android (Original or Materialized) must be sideloaded as it is not included in this module.
More information here: https://forum.xda-developers.com/showpost.php?p=73357433&postcount=450
v2.5 Changelog:
- Initial release
-----------------------------------------------------------------------------------------
Gaming Controller Keylayouts v2.0
Adds keylayouts for use with Xbox 360, Xbox One, Xbox One S, and Nvidia Shield controllers.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Stereo Speaker and Microphone Gain Tweak v2.0
Created by @magura320, this module allows the earphone to be used as a speaker, and mods the microphone pickup when recording video.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Extended Volume Steps v2.1
Extend the media volumes to 30 steps, and the call volume to 15 steps. Credits to the article on the front page of XDA by Mishaal Rahman.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
Magisk-ready modules
Busybox Installer 1.27.1
Created by @osm0sis, this version of Busybox has never given me any problems during my use. Highly recommended.
Simply flash in TWRP. The installer will detect Magisk, build the module, and install it.
Be sure to disable Busybox in the Magisk Manager app, followed by rebooting to make use of this.
-----------------------------------------------------------------------------------------
Folder dump of old Modules for Magisk 11 or lower
Note: Modules in this folder are no longer supported or maintained. They are here in case someone out there still wants to use them.
Very helpful thread thanks
is your snapdragon camera extremely buggy? Only a few features work for me.
Most of the mods just need root..can be SuperSU also..
Pretty nifty stuff. I'm assuming you can't make a center clock magisk module, can you?
Thanks for the modules! The ones I've downloaded so far seem to work except for the Snapdragon camera, which doesn't open.
Edit: nevermind the camera works after granting permissions manually.
You might want to consider adding these modules to the magisk repo.
@Spasticdroid how would you compare your aptx module to this one? https://forum.xda-developers.com/apps/magisk/magisk-oneplus-3-aptx-res-audio-t3541904
knpk13 said:
Pretty nifty stuff. I'm assuming you can't make a center clock magisk module, can you?
Thanks for the modules! The ones I've downloaded so far seem to work except for the Snapdragon camera, which doesn't open.
Edit: nevermind the camera works after granting permissions manually.
You might want to consider adding these modules to the magisk repo.
@Spasticdroid how would you compare your aptx module to this one? https://forum.xda-developers.com/apps/magisk/magisk-oneplus-3-aptx-res-audio-t3541904
Click to expand...
Click to collapse
For the center clock mod, I assume that would fall under modding SystemUI.apk or OPSystemUI.apk. I've tested a few mods from this sub-forum in the form of modules, and ended up having to factory reset my phone after disabling that module.
As for the codec, this one has the APT-X HD library included.
Thanks a lot for this awesome thread and these infos
all works like a charme
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
matthias4 said:
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
Click to expand...
Click to collapse
Long post reply about GPM here: https://forum.xda-developers.com/showpost.php?p=70804660&postcount=11
Short reply, run ViPER as "Compatible" under FX Compatible Mode for use with GPM.
I've tried disabling anything that has remotely anything to do with audio, which seems to be Dirac and Dirac Control Service on this phone, to solve the issue, but no go.
Also, you don't have to run your kernel in Permissive with this module of ViPER. It's already set up to allow running in Enforcing.
matthias4 said:
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
Click to expand...
Click to collapse
Sooo I looked here and there and foud that the FX Compatible mode fixed it. Play Music works with Viper again. Thanks OP for the great pack. That bass, though.
Is there any way to rever to stock speaker configuretion? Just wondering before flashing the mod.
How about Google pixel navibar ?
weriwd said:
Is there any way to rever to stock speaker configuretion? Just wondering before flashing the mod.
Click to expand...
Click to collapse
Disable or uninstall the magisk mod
Hey great work! Thanks for this.
I do have a question though, what's the difference between your Google assistant vs the one available to download within magisk?
Thanks!
kinfam said:
Hey great work! Thanks for this.
I do have a question though, what's the difference between your Google assistant vs the one available to download within magisk?
Thanks!
Click to expand...
Click to collapse
I never bothered with the download menu in Magisk, but I just took a look, and mine does the same thing the one on the Magisk repo does, which is adding the "ro.opa.eligible_device=true" to build.prop, and not spoofing a phone as a Pixel. Something a lot of older non-Magisk mods do.
Same with the EmojiOne module.
As for the Controller Keylayout module on the repo, it's also similar, except mine has the keylayout files for the Nvidia Shield Controllers included.
saberzaid said:
How about Google pixel navibar ?
Click to expand...
Click to collapse
Not doing that as that requires System UI and/or framework-res.apk modding. Similar reason why is explained in this post: https://forum.xda-developers.com/on...gisk-modules-oneplus-3t-t3548446/post70826963
Great mods
I'm using a bunch on Oneplus 3 with open beta 11, if anyone wanted to know for compatibility reasons
You know that aptx wont work.
The HAL and hardware doesnt support it.
I have install viper addon but dont see the app. How can i start viper? Stereo Mod also not work.
pahapoika91 said:
You know that aptx wont work.
The HAL and hardware doesnt support it.
Click to expand...
Click to collapse
Source(s) for this claim please.
Magnum Opus™ Features:
- The most advanced and comprehensive sound system ever made available.
- Jellybean through Android O developer preview support.
- ARM, Mediatek™, Qualcomm™, 32bit, 64bit, and x86 support.
- Full SELinux Enforcing support
- Magisk™ support provided
- 300MB of fully customizable sonic bliss.
Modules:
- Core System module (required once during initial installation)
- ViPER4Arise™ 2.5.0.5 module (optional)
- ViPER4Arise™ 2.3.4.0 module (optional)
- ViPER4Arise™ Profiles module (optional)
- Dolby Digital Plus™ module (optional)
- Dolby Atmos™ module (optional)
- AM3D ZIRENE® module (optional)
- Sony™ Xperia XZ Music Suite module (optional)
- Arkamys™ Audio module (optional)
- ICEsound™, presets, and configuration modules (optional)
- Esira™ Media Player module (optional)
- ViPER4Android XHiFi module (optional, not recommended)
- AOSP MusicFX module (optional)
- Dirac™ Power Sound module (optional)
- deep_buffer removal module (optional)
- SD Card permissions repair module (optional, can add 3 - 5 minutes to the recovery session)
Magnum Opus™ Core System module:
Below(attachments), is the arise_customize.prop file as found in the Modular Installer zip. This file will be placed in /sdcard during the first recovery install if not already existing and the installation will end with an Error 1 and its informative text print out. This step can be avoided by extracting arise_customize.prop to /sdcard, manually editing the file for desired installation build result, saving changes, and then flashing the Modular Installer zip in recovery.
- Once installed, remove the value of "true" from the "install.core=" line in /sdcard/arise_customize.prop for future recovery sessions when installing/uninstalling available modules.
- This allows for the modules to work in a "plug-and-play" fashion, otherwise, installing the Core System module again will replace audio_effects with the basic template - breaking functionality for every installed module with audio_effects entries.
Installation:
Extract and examine the contents thoroughly before beginning the sound system installation.
Dirty flash your current ROM according to ROM developer's dirty flashing instructions if any other sound mod is currently installed.
Ensure that sufficient free /system space (300MB+) is available.
Boot to recovery
Install > ARISE Sound Systems™ zip
Reboot
Uninstalling:
No uninstaller zip will be made available due to the amount of overwritten /system files.
Uninstall the A.R.I.S.E. Sound System completely by dirty flashing your current ROM according to your ROM developer's dirty flashing instructions.
link to the original thread https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
downloads link https://www.androidfilehost.com/?w=files&flid=176171
IF LIKED HIT THE THANKS BUTTON
Click to expand...
Click to collapse
I did the whole procedure, and when I install from recovery i get error 1 the file comes up customize prop is already in sd card. How do I rename it?
I tried to install this arise opus magnum many times on my j700F i did All the steps but not founding any app in drawer.i m usin DNA custom Rom which is nougat based and se linux is permissive in this Rom...plz help how to install this in perfect way
So I have the following Setup to monitor new apps for Data leakage and privacy violations.
Poco F1 MIUI Globalk 11,0,5 stable
Magisk Manager (renamed) 7.5.1
Magisk 20.4
Magisk Modules:
Always Trust User Certificates 0.4.1
Move Certificates 1.8
Riru Core 21.2
Riru Edxposed 0.4.6.1 YAHFA
Xposed Modules:
Exposed Manager 4.5.7
AFwall+ 3.4.0
to inspect traffic i use HTTPCanary.
Certain Apps like to pin their certificates, so i use justtrustme 0.4 to bypass the various pinning attempts.
Now the issue:
As long as i keep JTM disabled as a module, httpcanary can pickup various connection attempts, some with pinning errors.
If i enable the module and restart the device, the traffic picked up by HTTPCanary dies.
I would assume at least the same amount of connections as before , maybe with a few apps failing to be unpinned, but not such a reduction.
Is there anything obviously wrong with my unpinning setup?
Pixel Display Optimisation for Redmi 7 Magisk ModuleDescription:Few display optimisation tweaks adopted from Pixel 3a to Xiaomi Redmi 7.
What this module does?
This module enable Pixel display calibration, color scheme, turn on sRGB 8888 mode and adds some other display tweaks.
Especially useful for photography and videography, since it provides natural color view.
Note:
This module designed to work exclusively on Xiaomi Redmi 7. It may work also on other devices, but with limited features.
Requirements
Android 9, 10, or 11
Magisk 20.0 installed
Redmi 7 device
Tested on Redmi 7 Lineage OS 17 Magisk 20.4
Preliminary
Due high fragmentation of Android devices configurations, there always remains a chance for occasional bootloop, after flashing Magisk modules incompatible with your device.
Therefore, to minimise such risk, while installing any Magisk modules, use custom recovery, which has an option to disable them in case of bootloop, such as the latest version of Orangefox recovery.
If you don't have it, make full system and data backup or at least vendor backup.
Installation Guide
Install the module via Magisk Manager and reboot system.
Troubleshooting
If bootloop happens, reboot into recovery and disable module. Use recovery with inbuilt manager of Magisk modules, such as last version of Orangefox. If you don't have, download it on pc, copy to sd card and then reboot into your recovery and flash it.
Support|| Github ||
|| XDA ||
Disclaimer:
The author of this mod is not responsible for any form of damage, which may arise from using it; use it at your own risk.
Change Log:
Version: 1.0
Initial built
Magisk 20.0+
Date: 20.05.2021
Can I pm to u?
I'm going to update my Samsung S21 from Android 11 One UI 3.1 to Android 12 One UI 4, can someone confirm that the standard firmware update procedure (patched ap + home_csc + bl + cp) will work?
Thank you
For the love of all that is holy, do not go to android 12 yet, it has broken so many of my apps and workfliws, including virtual environments. Garbage update.
Thanks.
Last Samsung's build broke compatibility with magisk 23, so I need to wait for its update too...
If dt fstab contains error, fallback to default fstab by yujincheng08 · Pull Request #5139 · topjohnwu/Magisk
See https://cs.android.com/android/platform/superproject/+/master:system/core/init/first_stage_mount.cpp;drc=master;l=155 From the source of FirstStageMount, dt fstab can fail gracefully and if any...
github.com
just to report, update done following this step:
- uninstallaed riru module and USNF (riru version)
- unhide magisk app
- update magisk app (23 > 24.1)
- update magisk (direct install) and reboot
- hide magisk app
- patched latest AP and flashed with BL/CP/HOME_CSC
- enabled zygisk and added previuos magisk hide apps to denylist
- installed USNF (2.2.1 zygisk version) and reboot