Hi!
I have a very big problem I can't solve. Accidentaly I deleted all data of my phone including the Operating System (system.img) and searching and googling trying to download again the system.img i couldn't find it. Everytime I turn on the phone I goes to TWRP recovery manager or instead I can go into bootloader mode but never system. How can i install again the system EUI?
I tried to flash some roms (Cuoco92's, RuschRom, Official, Flyme Os even MIUI) but it has no solved the problem cause I think it was as a update.
I'm noob at this so I'll thank everything!
Hello, I have a philips 55puk6400/12. This tv was already not working great from the start. And after the last firmware update it wont even start up. It has a bootloop or something.
Things I tried:
Installed the new software via android recovery
Tried to clear the cache from the android recovery
Tried to wipe user data from the tv. This one I managed to do once as the tv suddenly booted up.
But... this all didn’t work for me.
Does anyone have a solution or a older version of the software of this 2015 model?
Kind regards,
Arjan
Hello everyone, I have the Amlogic S912 CSA95 Android 7.1.2 device, I tried to install a rom of the T95Z by the sd card method, and so install TWRP and Poison Rom, it loaded the upgrade, however after rebooting it was no image on HDMI, I already tried to flash the rom stock again the USB Burning Tool, and it always has the error "uboot / get result / disk initial error" never exceeds 7%, I can not load the rom on the device, I already tried the sd card method and also can not image on HDMI, I am with the device bricked, only with the red led (off) and blue (on) from what I have been searching, my Bootloader is wrong, how can I solve this problem??? Is there any way to erase the wrong data from memory and be able to flash the Stock Rom again via SD card??? I need my CSA95 device running as before.
I managed to recover the CSA95, however I can not use it, it loads the first time, and with 5 minutes of use, the problems begin, applications presenting errors and closing alone, and the device locking and restarting direct, impossible to use, I think was defective.
Hi,
last year I bought a NPET Android TV BOX with 2GB RAM and 8GB ROM. It was equipped with an Android 6.0 ROM from factory which I am searching now.
In December 18, I had the idea to install the ATV Xperience SW, because the factory one worked...lets say OK. But not flawless and with limitations.
I prepared a TWRP 3.0.2 mircoSD card and backuped BOOT, DATA and SYSTEM, just in case something goes wrong and...the ATV installation went wrong!
Red Light was the result and the box didn't boot up by pressing the power button. I plugged the USB Cable in and flashed a A95X firmware, which seemed to be similar in terms of HW with my boxes. And everything worked, except Wifi and BT. Doesn't matter, I thought, I have TWRP and my backup, but it doesn't worked out. BOOT and DATA partitions could be recovered but not the SYSTEM partition (createTarFork() process ended with ERROR=255). I tired several other images, but neither Wifi nor Bluetooth could be actitivated. For testing purcposes, I have installed OpenELEC on a microSD card and both, Wifi and BL, started to work again. But as this box is for my girlfried, she wants to have Android back on this device. Wifi and BT Chip is the KM63351412 (Please see attached PICS of the mainboard).
Does somebody of you has the factory image of this box?
I have searched the Internet the last couple of days, but couldn't find it. I have also contacted NPET directly, but no response so far.
Or does somebody know an android image with the KM63351412 chipset embedded?
Hi All,
fortunately, a guy called "aidanmacgregor" has made an universal image which contains various wifi and bt driver in this image.
https://forum.xda-developers.com/an...m-android-tv-custom-rom-7-1-2-s905x-t4098131/
for me, this box called npet s905x is now fully working again!
Thanks to the creator @aidenmacgregor!
Cheers,
Cromatic
??
Helly XDA-Members,
i have a 64 GB Pocophone F1 and bought a 128 GB version. So i can use one for testing and the other as a daily driver. I made a full TWRP backup of the 64 GB Version and tried to restore it on the 128 GB version. Then i stuck on a encryption error and wiped accedentely the SYSTEM. So my IMEI is gone and bluetooth, wifi etc, too.
After trying different software tools like QFIL, QualcommIMEIRebuilder or QLM IMEI REPAIR Tool_B19 but nothing helped me out.
Hopefully here is a person who had the same problem or knows how to help me.
At status Quo i have the 64 GB Pocophone working with unlocked bootloader, TWRP, rooted and DerpFest Rom installed. (Working IMEI, Wifi etc.)
and the 128 GB Pocophone with unlocked bootloader, TWRP, rooted and DerpFest Rom, cause the original MIUI ROM only shows the error "NV Data Corrupted" and bootloops to MI Recovery. The xiomi.eu Rom boots directly to Recovery, so i installed the DerpFest ROM which allowes me to fully boot up the Phone. But without Wifi, without EMEI etc.
[Problem Fixed]
[Solved] Wiped System Stuck on Boot to Mi Recovery with NV Data Corrupted Error
I finally restored the Baseband of my Pocophone F1 and will tell you how I did it.
1. I flashed the latest available Globla Stalbe Fastboot Rom (.tgz File) via Mi Flash or bad.
You get it here: POCO F1 Latest Global Stable Version Fastboot File Download
2. Reboot your Phone, then you will start up and it reboot automatically to Mi Recovery after seeing a white loading circle. In the Mi Recovery there as an red Error Message with "NV Data Corrupted"
3. This Error I fixed with this Video:
https://www.youtube.com/watch?v=DLTrwnf7bFA
Here you have to mention, that you need a QCN File for the Pocophone. All you need is a Poco F1 eng.qcn File.
If this was the real solution i don't know. It could be possible, that i fixed it with making a backup of my working Pocophone 64 GB using TWRP Recovery and make a checkmark at System, System Image, Data and EFS. Then i transferred it to the broken Pocophone 128 GB and recovering it there.
You need to flash TWRP first, cause of the Flash and reboot from the Fastboot from you lost TWRP and only see the Mi Recovery.
4. Now you need to Root your device. I´ve used Magisk, then you reboot completely to MIUI and activate the Developer Mode. And USB Debogging in Developer Settings. The rest i fixed with this Video:
https://www.youtube.com/watch?v=b11v41q8d6A
In this Video you See a Tool with uses a Dongle to get licenced. How you get a license or a Dongle with license you have to find out yourself. Maybe there's a way to Cr##k it like an old Video game where you don't have to put in a CD to play the Game .
So now i used the IMEI from the Backside of my Pocophone F1 128 GB package and the English QCN File we loaded before.
After a reboot everything works fine and you can call again or use Wifi or Bluetooth.
I am so thankful to the People who helped me in the german Forum. In the fanbase Forum, MIUI Germany you find a german post of this solution. The most credits goes to Raikubl from Advanced It Institute he is the one who made the YouTube Video and helped me out.
Damn i love MIUI so much.
Have a nice Evening.
Hello brother, How can I contact you, please help me, i am stuck in the same situation you were
Hi Rajburundkar you can try my solution I documented in the post above. Or write me here on xda.
I successfully restored imei using your method but now my phone is not registering on any network. It showd the sim inserted but mobile radio keeps turning off.
Flas stock rom two times..
1 lock bootloader n all.
2. Do nothing just flash
Umt
Someone who succeeded can help me with the dongle.
Hello Sterosize can you PM solution for UMT dongle?
Sterosize said:
[Solved] Wiped System Stuck on Boot to Mi Recovery with NV Data Corrupted Error
I finally restored the Baseband of my Pocophone F1 and will tell you how I did it.
1. I flashed the latest available Globla Stalbe Fastboot Rom (.tgz File) via Mi Flash or bad.
You get it here: POCO F1 Latest Global Stable Version Fastboot File Download
2. Reboot your Phone, then you will start up and it reboot automatically to Mi Recovery after seeing a white loading circle. In the Mi Recovery there as an red Error Message with "NV Data Corrupted"
3. This Error I fixed with this Video:
https://www.youtube.com/watch?v=DLTrwnf7bFA
Here you have to mention, that you need a QCN File for the Pocophone. All you need is a Poco F1 eng.qcn File.
If this was the real solution i don't know. It could be possible, that i fixed it with making a backup of my working Pocophone 64 GB using TWRP Recovery and make a checkmark at System, System Image, Data and EFS. Then i transferred it to the broken Pocophone 128 GB and recovering it there.
You need to flash TWRP first, cause of the Flash and reboot from the Fastboot from you lost TWRP and only see the Mi Recovery.
4. Now you need to Root your device. I´ve used Magisk, then you reboot completely to MIUI and activate the Developer Mode. And USB Debogging in Developer Settings. The rest i fixed with this Video:
https://www.youtube.com/watch?v=b11v41q8d6A
In this Video you See a Tool with uses a Dongle to get licenced. How you get a license or a Dongle with license you have to find out yourself. Maybe there's a way to Cr##k it like an old Video game where you don't have to put in a CD to play the Game .
So now i used the IMEI from the Backside of my Pocophone F1 128 GB package and the English QCN File we loaded before.
After a reboot everything works fine and you can call again or use Wifi or Bluetooth.
I am so thankful to the People who helped me in the german Forum. In the fanbase Forum, MIUI Germany you find a german post of this solution. The most credits goes to Raikubl from Advanced It Institute he is the one who made the YouTube Video and helped me out.
Damn i love MIUI so much.
Have a nice Evening.
Click to expand...
Click to collapse
was your bootloader locked or unlocked? I'm in a similar situation and my bootloader is locked
I am stuck at the same point stock recovery with NV data corrupted error. I please help me out I don't have any backup or the required partition please share your backup with me. I would be very thankful to you
Please share your backup with me. Or the required partition to fix NV data corrupted
Sterosize said:
Hi Rajburundkar you can try my solution I documented in the post above. Or write me here on xda.
Click to expand...
Click to collapse
Please share your backup with me. Or the required partition to fix NV data corrupted
HELP ME WITH MY PROBLEM
Mobile data is not connecting properly after changing motherboard in MI Service Center
Mi changed my phones mother board under warranty after that my mobile`s mobile data 4g connectivity is low. when i asked them they say its because your using Airtel Sim try using JIO. i came home and tried Jio Sim but problem continued. then i...
forum.xda-developers.com
Please someone with access to this UMT Dongle, help!
Sterosize said:
[Problem Fixed]
[Solved] Wiped System Stuck on Boot to Mi Recovery with NV Data Corrupted Error
I finally restored the Baseband of my Pocophone F1 and will tell you how I did it.
1. I flashed the latest available Globla Stalbe Fastboot Rom (.tgz File) via Mi Flash or bad.
You get it here: POCO F1 Latest Global Stable Version Fastboot File Download
2. Reboot your Phone, then you will start up and it reboot automatically to Mi Recovery after seeing a white loading circle. In the Mi Recovery there as an red Error Message with "NV Data Corrupted"
3. This Error I fixed with this Video:
Here you have to mention, that you need a QCN File for the Pocophone. All you need is a Poco F1 eng.qcn File.
If this was the real solution i don't know. It could be possible, that i fixed it with making a backup of my working Pocophone 64 GB using TWRP Recovery and make a checkmark at System, System Image, Data and EFS. Then i transferred it to the broken Pocophone 128 GB and recovering it there.
You need to flash TWRP first, cause of the Flash and reboot from the Fastboot from you lost TWRP and only see the Mi Recovery.
4. Now you need to Root your device. I´ve used Magisk, then you reboot completely to MIUI and activate the Developer Mode. And USB Debogging in Developer Settings. The rest i fixed with this Video:
In this Video you See a Tool with uses a Dongle to get licenced. How you get a license or a Dongle with license you have to find out yourself. Maybe there's a way to Cr##k it like an old Video game where you don't have to put in a CD to play the Game .
So now i used the IMEI from the Backside of my Pocophone F1 128 GB package and the English QCN File we loaded before.
After a reboot everything works fine and you can call again or use Wifi or Bluetooth.
I am so thankful to the People who helped me in the german Forum. In the fanbase Forum, MIUI Germany you find a german post of this solution. The most credits goes to Raikubl from Advanced It Institute he is the one who made the YouTube Video and helped me out.
Damn i love MIUI so much.
Have a nice Evening.
Click to expand...
Click to collapse
hey, thank for sharing this guide with us.
but now i don't have access to a umt dongle.
and no setup/loader is working without it.
please help me with it.
ive done all other steps and tried to restore modified qcn but getting bootloop everytime.
my telegram username is- t.me/FuxNoob