I forgot my honor 9 lite's pattern and its having very importent documents. So I can not wipe or erase my data. I tried everything found on internet (dr. Fone do not support it, don't know google id, debugging is not enabled, bootloader is locked). No option left for me ! What to do please help. I'm ready to pay. Please help!!!!!
ankto420 said:
I forgot my honor 9 lite's pattern and its having very importent documents. So I can not wipe or erase my data. I tried everything found on internet (dr. Fone do not support it, don't know google id, debugging is not enabled, bootloader is locked). No option left for me ! What to do please help. I'm ready to pay. Please help!!!!!
Click to expand...
Click to collapse
If you can boot into Recovery Mode then look here.
It has the only four option: 1.) reboot 2.) wipe data 3.) wipe cache 4.) safe mode
ankto420 said:
It has the only four option: 1.) reboot 2.) wipe data 3.) wipe cache 4.) safe mode
Click to expand...
Click to collapse
You don't have a custom recovery, so the only way you can do that is by wiping your data.
Related
Assuming my Galaxy Note II phone has been unlocked successfully, if I do a factory reset to upgrade to note2_JellyBeans_B8.zip:
YOU MUST BE UNLOCKED
Step 1-
Wipe Data Factory Reset!
Step 2-
Wipe davlick cache
Step 3-
install zip and pick your options
Step 4-
Reboot and enjoy!
wouldn't this restore the phone back to stock?? Or is it just the bootloader partition that is left alone when you do a factory reset? Also, the instructions were not too clear when it mentions: "install zip and pick your options". Do I unzip the file and pick something in the install folder? A tad confused here...
hugeyeti said:
Assuming my Galaxy Note II phone has been unlocked successfully, if I do a factory reset to upgrade to note2_JellyBeans_B8.zip:
YOU MUST BE UNLOCKED
Step 1-
Wipe Data Factory Reset!
Step 2-
Wipe davlick cache
Step 3-
install zip and pick your options
Step 4-
Reboot and enjoy!
wouldn't this restore the phone back to stock?? Or is it just the bootloader partition that is left alone when you do a factory reset? Also, the instructions were not too clear when it mentions: "install zip and pick your options". Do I unzip the file and pick something in the install folder? A tad confused here...
Click to expand...
Click to collapse
You want to wipe system, factory reset, cache and dalvik cache. Factory reset will wipe data like Google account and apps and such.
Then the ROM installs with aroma which loads up a GUI that let's you choose what you want. Can choose apps installed clock location how many widgets you show at the top what kernel you run etc. Literally flash the zip and you'll understand.
Sent from my SCH-I605 using xda app-developers app
nosympathy said:
You want to wipe system, factory reset, cache and dalvik cache. Factory reset will wipe data like Google account and apps and such.
Then the ROM installs with aroma which loads up a GUI that let's you choose what you want. Can choose apps installed clock location how many widgets you show at the top what kernel you run etc. Literally flash the zip and you'll understand.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I am not sure how to "wipe system", but I read how to factory reset and clear dalvik cache. Also not sure how to load the jellybeans ROM(do I mount it.. is it an .iso? etc.)... lots of reading to do. Ty for the input m8.
hugeyeti said:
Thanks. I am not sure how to "wipe system", but I read how to factory reset and clear dalvik cache. Also not sure how to load the jellybeans ROM(do I mount it.. is it an .iso? etc.)... lots of reading to do. Ty for the input m8.
Click to expand...
Click to collapse
If youre using TWRP click wipe, then factory reset, swipe to do so, then cache same way, then dalvik.
To flash rom click the install tab, find the rom, make sure you tell it to look at the internal or external at the top and find the rom, then swipe to flash it
sidenote: factory reset clears data, which is what most people do. system wipe actually clears out the partition where the rom is, in other words the phone will not reboot until youve flashed a rom to it
hugeyeti said:
Thanks. I am not sure how to "wipe system", but I read how to factory reset and clear dalvik cache. Also not sure how to load the jellybeans ROM(do I mount it.. is it an .iso? etc.)... lots of reading to do. Ty for the input m8.
Click to expand...
Click to collapse
Put the ROM on your phone and go to the install section of your recovery (You must boot into recovery by holding power, home, and volume up while turning on your phone) and flash it from there.
Joshina said:
Put the ROM on your phone and go to the install section of your recovery (You must boot into recovery by holding power, home, and volume up while turning on your phone) and flash it from there.
Click to expand...
Click to collapse
My phone is now unlocked + jailbroken after following instructions from CASUAL. No issues.
When u say put the rom in your phone. U mean my SD card? Per littleguevara's post:
"To flash rom click the install tab, find the rom, make sure you tell it to look at the internal or external at the top and find the rom, then swipe to flash it
sidenote: factory reset clears data, which is what most people do. system wipe actually clears out the partition where the rom is, in other words the phone will not reboot until youve flashed a rom to it" <----- if the phone is wiped then everything is gone so I can't put the jellybeans rom there.
Also from "Originally Posted by nosympathy
You want to wipe system, factory reset, cache and dalvik cache. Factory reset will wipe data like Google account and apps and such"
Will I be able to wipe cache and dalvik cache WHILE in recovery mode? I just want to be as proactive as possible and avoid being reactive to anything that comes my way that I am not aware of. I believe I already have TWRP (i saw their logo while jailbreaking).. Any input is appreciated m8.
Hi People,
I recently rooted my phone and things were good for 3 days until I screwed up, I installed "Disable service" app and I froze a service called "SIM Toolkit -stkapservice" and after restarting the phone is not bootling up, the boot logo appears again and again..
I'm not sure if disabling that service cause that, I have been disabling some others as well like qcconnectivity service, wiper app, smartcard service, picoservice, geocode service
Could someone please help me what to do ASAP? Should i flash it again? is so all my user data will be deleted again right?
Is there any way without deleting user data and settings? I've been hearing words like CWM, wipe dalvik cache etc but im not an experienced user, I just rooted and messed up my phone..
Could someone please advise me how to fix it?
what do you mean user data? pictures?
or saved logins & settings?
if you do wipe to cache it will remove your settings, not your personal files.
SimonK9 said:
what do you mean user data? pictures?
or saved logins & settings?
if you do wipe to cache it will remove your settings, not your personal files.
Click to expand...
Click to collapse
Yes I meant my logins,installed apps etc..is there a way to backup those settings also ?
josephkarthic said:
Yes I meant my logins,installed apps etc..is there a way to backup those settings also ?
Click to expand...
Click to collapse
Well, only if you had clockworkmod recovery, but if you don't have a custom recovery installed then no. A custom recovery would allow you to backup the full data partition, but OEM (stock) recovery doesn't.
Your only option is to do a full factory data reset I'm afraid. Also wipe the cache.
Maurice5813 said:
Well, only if you had clockworkmod recovery, but if you don't have a custom recovery installed then no. A custom recovery would allow you to backup the full data partition, but OEM (stock) recovery doesn't.
Your only option is to do a full factory data reset I'm afraid. Also wipe the cache.
Click to expand...
Click to collapse
Ok thanks for your reply, I have flashed my device again by wiping out everything and now it booted to stock, the next step im about to install CWM recovery by following a online guide,
So after i install that whats next? how do i take my full data partition as you said? Can you pls tell me how or share some guides if possible?
thanks in advance..
josephkarthic said:
Ok thanks for your reply, I have flashed my device again by wiping out everything and now it booted to stock, the next step im about to install CWM recovery by following a online guide,
So after i install that whats next? how do i take my full data partition as you said? Can you pls tell me how or share some guides if possible?
thanks in advance..
Click to expand...
Click to collapse
To make a full backup is easy once you have cwm. Also, make sure you flash the cwm image made for YOUR device! Other images for different phones aren't going to work on yours! It will hard brick your device!
To make a android backup (nandroid backup), just follow this step-by-step tutorial:
Hello i forgot pin on my old phone, i have very important info that i need.
Please help me to unlock it, i really really need it. I tried many ways but no luck. Here is all Info:
Phone - energy phone max 4G, not rooted, USB debugging not enabled, no internet access.
I tried android multi tools 1.02b but it dont see any of my 5 phones.
I see another option is with aroma zip but my phone dont have install from sd card option.
Here are recovery options i have:
Android system recovery 3e 20151204
reboot system now
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
root integrity check
reboot to bootloader
power down
view recovery logs
I would really appreciate any help, really need to unlock it.
so i updated my phone to emui 9.0 and after reboot my phone stuck at honor logo and bootloop i have acces only to fastboot and dowload mod through usb and sd card (i tried flashing with sd card and usb cable throu vuume up and down but no succes )
i have no acces to erecovery
i got frp on and bootloader locked
so can you help me pelase
jsn-l22d (c185) 8.2.0.105
Hi,
I had the same problem but after doing a downgrade to Oreo
I managed to correct the problem by doing (wipe data/factory reset) but you will loose all the data
I think it would be wiser to try the option (wipe cache partition) before doing like me
codedz said:
Hi,
I had the same problem but after doing a downgrade to Oreo
I managed to correct the problem by doing (wipe data/factory reset) but you will loose all the data
I think it would be wiser to try the option (wipe cache partition) before doing like me
Click to expand...
Click to collapse
i don't have acces to erecovry mode i'm searching for a way to pass the stock through fastboot with the bootloader locked .. eft team managed to do that it but you need eft dongle version 2.4 and it's not cracked yet so i hope some one will find a way adn share it for free
Hello
After flashing TWRP (twrp-umi-3.4.0-2.img - Team Win Recovery Project) with and without Formatting Data, which anyways triggers some errors (see picture), clicking on Install I am shown /sdcard folder, and when I go up one level I see a bunch of folders but not Internal Storage. So I am unable to use TWRP.
I had identical results using twrp_umi.img also.
USB OTG is not working.
Please help. I have no idea what to do next.
Hancoz said:
Hello
After flashing TWRP (twrp-umi-3.4.0-2.img - Team Win Recovery Project) with and without Formatting Data, which anyways triggers some errors (see picture), clicking on Install I am shown /sdcard folder, and when I go up one level I see a bunch of folders but not Internal Storage. So I am unable to use TWRP.
I had identical results using twrp_umi.img also.
USB OTG is not working.
Please help. I have no idea what to do next.
Click to expand...
Click to collapse
hi
flash twrp 3.4.1b-0313
that one i use an works fine also with decrypt
Thanks for your suggestion, but the closest I can get is TWRP-3.4.1B-0218. Where did you find the twrp 3.4.1b-0313 version? And did you format data or not?
Hancoz said:
Thanks for your suggestion, but the closest I can get is TWRP-3.4.1B-0218. Where did you find the twrp 3.4.1b-0313 version? And did you format data or not?
Click to expand...
Click to collapse
i have it on my pc
i can upload it for u Tomorrow
yes i format data
I found it, and tomorrow I'll try it. Many thanks.
Sorry to disturb you again, but I read contrasting procedures on how to flash a ROM, on MI 10.
Some say:
- flash TWRP
- format data
- flash ROM.
Others say:
- flash TWRP
- flash ROM
- format data.
Some more:
- flash TWRP
- wipe dalvik and cache (no need to format data anymore)
- flash ROM.
What did you do exactly?
BTW do you know the TWRP psw?
Many thanks for your support.
Hancoz said:
Sorry to disturb you again, but I read contrasting procedures on how to flash a ROM, on MI 10.
Some say:
- flash TWRP
- format data
- flash ROM.
Others say:
- flash TWRP
- flash ROM
- format data.
Some more:
- flash TWRP
- wipe dalvik and cache (no need to format data anymore)
- flash ROM.
What did you do exactly?
BTW do you know the TWRP psw?
Many thanks for your support.
Click to expand...
Click to collapse
twrp pasw 152v
format data
reboot recovery
connect phone to pc
put zip file ro phone
wipe cache an dalvik cache
install zip
wipe again
reboot recovery
wipe again
go to reboot
power off the phone
now wen its shut down power it on
an it shut boot
it will take a litle time
I tried many version of wzsx150’s TWRP, the latest being 3.4.1b-0313, but the result is always the same (whether fastboot flash recovery twrp_umi.img or fastboot boot twrp_umi.img).
If I format data there are errors (first picture). If I go directly to install (with or without wipe dalvik and cache) I am anyway unable to see the folders of Internal Storage (second picture). So the TWRP is useless and I am stack with a China ROM device, which is not my first desire.
BTW password is incorrect (third picture), though I doubt it has something to do with the shortcomings.
Please I need a thoughtful help.:crying:
Here the forgotten pictures.
the passwd for decryption
is the one u hade to unlock ur phone before u try flashing it
Whether I use the psw for decrypting (Mount/Decrypt Data) or right at the start, it is always refused. I don’t know if this is the reason why in Install the /sdcard folder has only 0 and TWRP subfolders, or not. In any case there is no way I can flash a thing.
Hancoz said:
Whether I use the psw for decrypting (Mount/Decrypt Data) or right at the start, it is always refused. I don’t know if this is the reason why in Install the /sdcard folder has only 0 and TWRP subfolders, or not. In any case there is no way I can flash a thing.
Click to expand...
Click to collapse
if u dont incert the correct passwd u wont be able to do anything
The only password that I have is that you gave me: 152v. And it does not work.
Hancoz said:
The only password that I have is that you gave me: 152v. And it does not work.
Click to expand...
Click to collapse
didnt u have one ro unlock the lockscreen on miui11
I don't understand what you mean. Anyway I did the bare basic of setting on the stock China ROM. No fingerprint, no PIN, no Pattern, no Password or any other lock. In Developer options USB debugging is ON.
Hancoz said:
I don't understand what you mean. Anyway I did the bare basic of setting on the stock China ROM. No fingerprint, no PIN, no Pattern, no Password or any other lock. In Developer options USB debugging is ON.
Click to expand...
Click to collapse
hmm then i shutten ask for passwd
have u try not enter anything
After I reinstalled Stock ROM with MiFlash, and flashed TWRP, the psw disappeared completely and was able to flash EU ROM V12, But now I am stuck in TWRP. No way to get out of it.
And if I try to wipe I get the error: failed to mount '/data' (see pciture).
Hancoz said:
And if I try to wipe I get the error: failed to mount '/data' (see pciture).
Click to expand...
Click to collapse
now u have to do like this
format data
reboot recovery
connect phone to pc
put zip file to phone
wipe cache an dalvik cache
install zip
wipe again
reboot recovery
wipe again
go to reboot
power off the phone
now wen its shut down power it on
an it shut boot
it will take a litle time
Success! But only after I formatted data after flashing the EU ROM. I don't know how to thank you for your support. You were very helpful.