Good day.
Having trouble with my amazfit stratos watch.
After trying of flashing new rom, the watch doesn't respond to buttons, doesn't turn on, doesn't go into bootloader. Just a few lines on a screen, like a fuzzy writing.
Du all that, pc do recognize and also a all in one tool does.
Can't flash nothing to it, not from the cmd and not from the tool.
Help... SOS....
Related
I bought a used Zenwatch 2 and after a week it stopped working. When I turn it on it sticks on the Asus splash screen. After talking to customer support and looking online it appears that the "firmware has been corrupted.
I made the mistake of not turning on ADB Debugging while it worked, and unfortunately the screen appears to be unresponsive so I can't even put it into Fastboot mode to turn ADB Debugging on. Of course to make it even better the watch is not recognized when I plug it in because it doesn't appear to boot enough. Since I can't get into anything it makes it impossible to reinstall the firmware.
You all are my last hope, does anyone have any insights into a way to get the phone recognized, or anything that may help? Please help me keep this from becoming a fancy bracelet.
When you first turn it on, swipe diagonally down from either direction to get into recovery or fastboot. I know you said the screen is unresponsive, but if you haven't done it before it can be tricky. Even on a perfectly working watch, I still have trouble getting it to work. Try continuously swiping as you hold the power button, even before the splash screen shows up. If you can get it into fastboot, unlock the bootloader and try flashing my ROM.
CVertigo1 said:
When you first turn it on, swipe diagonally down from either direction to get into recovery or fastboot. I know you said the screen is unresponsive, but if you haven't done it before it can be tricky. Even on a perfectly working watch, I still have trouble getting it to work. Try continuously swiping as you hold the power button, even before the splash screen shows up. If you can get it into fastboot, unlock the bootloader and try flashing my ROM.
Click to expand...
Click to collapse
That seems to be what I am reading, but so far I have had no luck getting it to trigger into fastboot mode. I will keep trying.
Hi,
so today i've got the Amazfit BIP, but it's not working.
The problem is that i can't pair it for the first time.
After i've downloaded the Mi Fit App i wanted to pair the watch and i'm stuck on the pairing screen with the green and the red button. The watch doesnt react to any touch i'm making.
I've already tried the other apps like GadgetBridge and NotifyFitness, but it's always the same.
Is there a way to restart the watch?
Thanks for your help!
1. press the physical button to enable the screen touching
2. press the physical button longer(like 10 seconds or more) to reboot the watch
Hi there,
thanks for your reply.
But this does not work.
Nothing happens, just the backlight goes out
So you have to wait until the battery is down. I can't find another solution
same problem here!
i have the same problem; albeit mine is a new one.
i purposely have it unpaired; and thought "re-pairing" Amazfit Bip with my phone would solve the problem.
I was dead wrong. And now I'm stucked.
The phone were able to "see and recognised" the bip watch. However, the "Green" affirmative button cannot be confirmed as the touchscreen is NOT RESPONDING!
hi there,
i returned my watch and got a new one.
this time it works without problems.
My watch has become useless after latest upgrade. I can't remember the exact version of the upgrade but I cant access my watch anymore. It is just blank screen but I can tell its on because it tries to connect via Bluetooth with my headphones. I have been literally going back and forth with amazfit support to send me a new watch but they are more useless than the watch itself. this forum is my last hope..any help?
Did you try to plug in the charger and press the button long enough to get the watch restart?
My device is not turning on anymore..
i did try all the solution with pressing the button in many ways, Both buttons for 30+ sec, only red button also and other trials. Nothing.
Then i opened the smartwatch and if i've disconnect the battery clip inside, After i reconnect the clip connection, the device started with Amazfit logo, then reach the watch time screen and after 1 second it flash the screen, then it turn off immediately. After that there is no way to switch the device on, the only way i found is this. PS: also connected in charge do not turn on.
The meaning is that the Smartwatch still working but i think there is a software issue,
There is any way to flash or reset by software the device? Any way to update it connecting to a PC?
Hi, 8 months ago, i flashed custom rom on amazfit bip, i dont liked the new rom, do i decided to recover stock rom, and after flashing first file the amazfit doesn't turn on, black screen but in the mi fit app the watch is discoverable but i can't connect because i can't confirm the pairing on the watch. is there any solution to start the watch?
Grindur said:
Hi, 8 months ago, i flashed custom rom on amazfit bip, i dont liked the new rom, do i decided to recover stock rom, and after flashing first file the amazfit doesn't turn on, black screen but in the mi fit app the watch is discoverable but i can't connect because i can't confirm the pairing on the watch. is there any solution to start the watch?
Click to expand...
Click to collapse
Try to start charging the watch first.
When full try again.
Or you can try to start it, while it still is being charged. Sometime that helps to.