Amazfit Stratos 3 PAI not updating - Amazfit

Hi, I got the Stratos 3 yesterday and so far love it. I've done a couple of runs, but noticed the PAI isn't updating our showing my recorded activities?
Does anyone know what might be causing this or how I get the PAI to start working? My heart rate is set to continuous.
Thanks

Loob_grant said:
Hi, I got the Stratos 3 yesterday and so far love it. I've done a couple of runs, but noticed the PAI isn't updating our showing my recorded activities?
Does anyone know what might be causing this or how I get the PAI to start working? My heart rate is set to continuous.
Thanks
Click to expand...
Click to collapse
Stratos 3 doesn’t use PAI. It uses EPOC, much better.

Related

Stratos latest Rom 2.3.6.1

I notice there's a new rom for stratos which is 2.3.6.1. Have anyone upgrade to it? Care to share?
ajid1977 said:
I notice there's a new rom for stratos which is 2.3.6.1. Have anyone upgrade to it? Care to share?
Click to expand...
Click to collapse
I have updated to 2.3.6.1 its a very small update just to fix some time zone issues on Brazil not seeing any other changes on the watch.
and addressing the crazy auto back light issue as well
ajid1977 said:
I notice there's a new rom for stratos which is 2.3.6.1. Have anyone upgrade to it? Care to share?
Click to expand...
Click to collapse
Hello,
I noticed this message today.
But I didn't upgrade it because I am not in Brazil.
Waiting for next update to correct some bugs concerning Heart rate, floors climbed.....
Since the update the steps count is not incrising. The countinus hr stoped but the solution was to set it off and on again.
Edit: restarted the watch and now the steps are incrising again. Lost a whole day of statistics.
chakatak said:
Since the update the steps count is not incrising. The countinus hr stoped but the solution was to set it off and on again.
Edit: restarted the watch and now the steps are incrising again. Lost a whole day of statistics.
Click to expand...
Click to collapse
The continuous heart rate is still malfunctioning. It is not working continuously as it should. It measures, then stops, then starts again and so on. A bit annoying. I advise not to update to this version.
I also lost a half day of tracking because of this update.
2.3.6.1 does not work!
Guys hello!
I have installed 2.3.6.1 yesterday and tried several different sport activites.
What can I say... I've got a strong desire to throw the watches into trash bin.
Three activities were tried: walking, running and treadmill. It appered to be that no one of them work! At all! Only timer were counting, but the other parameters were zeros: distance, calories, heart rate and so on. Even though for walking and running the gps was avaliable. Considering measuring heart rate, even the green leds on back side were dead for all the time.
Turning on backlight by raising arm did not work. But actually, having all the watches in not working condition, I paid not much attention to the backlight.
I thought, with new version 2.3.6.1, they introduced some new settings which have influence to the activities behavior. So I checked the settings menu, but did not discover any new options.
I ended up having no idea what to do with the watches. So any suggestion will be accepted with gratitude.
@pashapush,
Open the Amazfit app on the phone, wait for sync, then go to Unpair the watch. It will restore it to factory settings, open a barcode screen so you can add ti back again. Then it will restore last 7 days from the cloud back to watch. More-less in 3-5 minutes your watch will be same as before, just need to add a favorite watchface if it was from the third party.
Mentioned procedure always fixed any issues with my Stratos. Still a challenge for them firmware updates, but this simple step after each update should be applied if any issues occur.
To everybody
With latest ROM 2.3.6.1 I have finally solved the battery drain issue.
I have update to this rom and followed this trick https://forum.xda-developers.com/showpost.php?p=77997450&postcount=35
and now its great
I have lost only 7% of battery in 24h, with HR continuos on and airplane mode.
with previous rom 2.3.6.0 even more than 30% in 24h
nidza said:
@pashapush,
Open the Amazfit app on the phone, wait for sync, then go to Unpair the watch. It will restore it to factory settings...
Click to expand...
Click to collapse
Thank you so much! This way really helped.
Guys hello,
I have updated to 2.3.6.1 and I have a battery drain issue. I have update to this rom and followed this trick https://forum.xda-developers.com/sho...0&postcount=35 . With 2.3.6.0 version I did not have this problem.
Any idea?
Anyone else with this problem?
how can I make downgrade to old rom?
ralerArahal said:
Guys hello,
I have updated to 2.3.6.1 and I have a battery drain issue. I have update to this rom and followed this trick https://forum.xda-developers.com/sho...0&postcount=35 . With 2.3.6.0 version I did not have this problem.
Any idea?
Anyone else with this problem?
how can I make downgrade to old rom?
Click to expand...
Click to collapse
Hi ,
What is your trick? Link showed Page not found.
I bought this watch one week ago.
I had the stock firmware for the english version (2.3.2.8), heart rate always on, during the night i didn't get any drops (even if the values aren't that accurate).
I updated the stock to the 2.3.5 by mistake, then i just updated to the latest one, this one.
Now my heart rate while sleeping it's full of gaps in chart, only half a dozen of values for hour... It's not usable.
Anyone has experienced this?
Any tip to solve this?
Can i revert back to the stock firmware without unlocking the bootloader?
What's the most stable usable version of the firmwares available 2.3.2.7/2.3.2.8/2.3.4.0/2.3.5.0/2.3.6.0/2.3.6.1?
Thanks
rootfixxxer said:
I bought this watch one week ago.
I had the stock firmware for the english version (2.3.2.8), heart rate always on, during the night i didn't get any drops (even if the values aren't that accurate).
I updated the stock to the 2.3.5 by mistake, then i just updated to the latest one, this one.
Now my heart rate while sleeping it's full of gaps in chart, only half a dozen of values for hour... It's not usable.
Anyone has experienced this?
Any tip to solve this?
Can i revert back to the stock firmware without unlocking the bootloader?
What's the most stable usable version of the firmwares available 2.3.2.7/2.3.2.8/2.3.4.0/2.3.5.0/2.3.6.0/2.3.6.1?
Thanks
Click to expand...
Click to collapse
Restart the watch
tiberiu20 said:
Restart the watch
Click to expand...
Click to collapse
Thanks
Already done that.... Several times.
Plus, unpaired the watch and paired again, without restoring the history...
Nothing seems to correct the issue.
After some testing, i came to the conclusion that the watch is ignoring low heart rates...
I have a very low heart rate, when sleeping it can go to 30, in the older version of the firmware i could see 31, 32 and so on.
After updating the watch, the lowest value that i saw it's 47, the same value that i have for each night of sleep after the update.
I tried to measure the heart rate after woke up, and it's says it can't be measured, done this several times. So I get up, and tried again and then i get the 47.... I sit down, tried again and nothing...
So it looks like that it ignores/can't measure lower values, and that explains the huge gaps that i have in my charts.
Anyone can confirm/test this?
rootfixxxer said:
After some testing, i came to the conclusion that the watch is ignoring low heart rates...
I have a very low heart rate, when sleeping it can go to 30, in the older version of the firmware i could see 31, 32 and so on.
After updating the watch, the lowest value that i saw it's 47, the same value that i have for each night of sleep after the update.
I tried to measure the heart rate after woke up, and it's says it can't be measured, done this several times. So I get up, and tried again and then i get the 47.... I sit down, tried again and nothing...
So it looks like that it ignores/can't measure lower values, and that explains the huge gaps that i have in my charts.
Anyone can confirm/test this?
Click to expand...
Click to collapse
Known issue. It has been reported to Amazfit: https://support.amazfit.com/hc/en-us/requests/new
lfom said:
Known issue. It has been reported to Amazfit: https://support.amazfit.com/hc/en-us/requests/new
Click to expand...
Click to collapse
Thanks
I made a new one. JIC
I have also big battery drain !
I had nit that for other ROM update :/
How to fix that whithout lose all the data?
bibicheu said:
I have also big battery drain !
I had nit that for other ROM update :/
How to fix that whithout lose all the data?
Click to expand...
Click to collapse
The battery in my case it's normal, 24h equals to 17% of the battery....
The recommended procedure:
Sync with the app.
Unpair the watch.
Restart the watch.
Pair again.
Some people say to reinstall the app and then when syncing leave the data only in the phone.

Training usage issue on Amazfit Stratos 3??

Hi guys! I'm new to the forum, so I'd like first of all to introduce myself : I´m a 40 yo Portuguese guy with a soft spot for gadgets
Anyway, what brings me to the forum: I recently bought the Amazfit Stratos 3. I've noticed this annoying feature (or is it a malfunction?): Everytime I go running, I set up the watch to track the training, and every time, after 1,6 km, the watch stops training by itself. Is it suposed to be like that, or is there something wrong with the watch/settings? Thank you for all the help
Kevlar79
Kevlar79 said:
Is it suposed to be like that, or is there something wrong with the watch/settings? Thank you for all the help
Kevlar79
Click to expand...
Click to collapse
Greetings from Germany!
The actual Firmware 4.2.6.0 seems to be buggy when it comes to activities with GPS. A lot of users here experienced some issues after updating to 4.2.6.0. Have a look in this thread and the pictures from winni21 if they are similar to your problems:
https://forum.xda-developers.com/showpost.php?p=82587745&postcount=5
We are waiting for a new fixed firmware for several weeks now. The only possible solution at the moment is to downgrade to 4.2.5.0. With 4.2.5.0 everything is runnig fine for me and other users. You have to unlock the bootloader to downgrade and you will lose your waranty with this step.
If you want to downgrade you can find the updater (downgrader) to 4.2.5.0 from saratoga here: https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
Good luck!
1!
Radnerd said:
Greetings from Germany!
The actual Firmware 4.2.6.0 seems to be buggy when it comes to activities with GPS. A lot of users here experienced some issues after updating to 4.2.6.0. Have a look in this thread and the pictures from winni21 if they are similar to your problems:
https://forum.xda-developers.com/showpost.php?p=82587745&postcount=5
We are waiting for a new fixed firmware for several weeks now. The only possible solution at the moment is to downgrade to 4.2.5.0. With 4.2.5.0 everything is runnig fine for me and other users. You have to unlock the bootloader to downgrade and you will lose your waranty with this step.
If you want to downgrade you can find the updater (downgrader) to 4.2.5.0 from saratoga here: https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
Good luck!
Click to expand...
Click to collapse
First of all: Thanks for the reply! :good:
I've compared my issue with the one U mentioned (winni21), but it doesn't match my issue at all. Considering that I bought my unit a week ago, i´ll be hoping for a new FW update, because I don´t want to get a void warranty just yet. Anyway, i've trained today with my watch without the glitch: Ib trained with no goal setting, and the watch behaved "normally". Thanx for the help!

amazfit stratos 3 GPS issue

The update to 4.2.6 contains huge errors. All the tested outdoor activities don’t work with it. I have examined Run, Go, Hike, Biking.
After a short time it crashes. It shows senseless numbers (for instance a million of hours), then the data is lost. Newly starting it, this process repeats.
anyone have any solution for this?
blazzz_ said:
The update to 4.2.6 contains huge errors. All the tested outdoor activities don’t work with it. I have examined Run, Go, Hike, Biking.
After a short time it crashes. It shows senseless numbers (for instance a million of hours), then the data is lost. Newly starting it, this process repeats.
anyone have any solution for this?
Click to expand...
Click to collapse
Yes roll back to 4.2.5.0 which work like a charm. i don't know if anyone has informed Amazfit i did not.
winni21 said:
Yes roll back to 4.2.5.0 which work like a charm. i don't know if anyone has informed Amazfit i did not.
Click to expand...
Click to collapse
so you can roll it back to previous ROM version with factory reset or is there any other way to do it?
blazzz_ said:
The update to 4.2.6 contains huge errors. All the tested outdoor activities don’t work with it. I have examined Run, Go, Hike, Biking.
After a short time it crashes. It shows senseless numbers (for instance a million of hours), then the data is lost. Newly starting it, this process repeats.
anyone have any solution for this?
Click to expand...
Click to collapse
blazzz_ said:
so you can roll it back to previous ROM version with factory reset or is there any other way to do it?
Click to expand...
Click to collapse
you can with unofficial way from saratoga thread here: https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
just FYI i've sent an message to the support yesterday.
here is their answer:
ello There ,
Thank you for contacting Amazfit Customer Support. We apologize if the products caused you any inconvenience.
Our tech team have located the issue, please kindly wait in patience for the optimize in the next firmware update.
Thank you for your understanding.
If there is anything else we can help you with, please let us know! FYI. https://support.amazfit.com/us/ is Amazfit official support website, you can have FAQ, User Manual & Operation videos of Amazfit products.
Hope you have a good day!
Sincerely,
Kitty
Amazfit Support
Ok,.. hopefully they will fix this bug. But they didn't mention when it's gonna come this update eh? ;/
Funny,
It seems the update is no more published (it is no more found when I clic on check updates)
Something is coming?
I also got in touch with Amazfit support, they wrote me new rom will be released within a week!
I really hope it's true because I got my stratos 3 a week ago and still I was not able to record a single activity!!!
deframat said:
I also got in touch with Amazfit support, they wrote me new rom will be released within a week!
I really hope it's true because I got my stratos 3 a week ago and still I was not able to record a single activity!!!
Click to expand...
Click to collapse
nice, to hear it! ...i can't wait anymore.. having the same problems all the time.
after a software update 4.2.7. i have still the same issue with GPS... do you also have guys??
In my case, the watch stops recording activities after like 5 min, No error message or anything.... I'm really unhappy with amazfit/Xiaomi.... Most of the tech related products I've bought in the last 4 years are from Xiaomi (inc. a stratos 2 that died after 18 months of use)... I'm really thinking that Xiaomi is no longer at the level they were a while ago or they say they are... Very disappointed... Let's see if this gets fixed or I just give up and buy something else
blazzz_ said:
after a software update 4.2.7. i have still the same issue with GPS... do you also have guys??
Click to expand...
Click to collapse
Just had this issue with the 4.2.7 firmware, plus notifications never coming thru not impressed and no sign of an update from amazfit
Hello, impossible to find a gps signal on my amazfit stratos 3. Thanks, Toni.

Stratos 3 sleep tracking

Hi, i got stratos 3 two weeks ago and it has been working greatly and a big upgrade from Garmin vivofit, but one problem is that sleep tracking worked the first few days, but then i got back to work, i work on a fishing ship and it seems to have lost the sleep tracking abilty, not if it has anything to do with me being out at sea or what, the vivofit worked here so this one should too, installed amaszmod and it ate up the battery and notifaication where coming late but still nice to see everything. but i have uninstalled it and still no sleep tracking so probably not that. anyone knows anything that can help? thank you
maybe you are not in the right sleep interval for the watch ?
I go to sleep at 6:00AM and unsleep at 2:00PM and Stratos do not count my sleep because it is not right hours for the watch........
Maybe that's it, maybe it will work again when back at home, but hopefully they will check on this and fix, thank you
halldors78 said:
Maybe that's it, maybe it will work again when back at home, but hopefully they will check on this and fix, thank you
Click to expand...
Click to collapse
just checked today and the sleep tracking seems to work fine now when im at home, not sure why it doesn't read when im out at sea, very strange

Amazfit Bip S Training error

Hello. During cycling activity, a training reset occurs and data is not saved. Reset occurs spontaneously: maybe after 5km, or maybe after 70km. The watch vibrates and the training breaks.Has anyone encountered this problem, are there any ways to solve it?
Amazfit Bip S (firmware version 2.1.1.08)
Amazfit latest app with Play market 4.5.0-play from 06.16.20
Did not happen to me so far. Make sure you do not press the button by mistake.
Freejack77 said:
Did not happen to me so far. Make sure you do not press the button by mistake.
Click to expand...
Click to collapse
The watch sits tight, even if I bend my wrist strongly, I can’t press the button
Hey
It happens the same to me and I haven't found the solution yet.
Sanbalzap said:
It happens the same to me and I haven't found the solution yet.
Click to expand...
Click to collapse
Developer Response:
1)Hi there, Thank you for contacting Amazfit Customer Support. We apologize if the product caused you any inconvenience! Our team have aware of this problem and they are working on it. We will release a firmware to solve this problem soon. Please stay tuned. Thank you for your support! Regarding the reboot issue, would you please help do a test to check if it can be resolved? We will push a test firmware according to your User ID in recent days, in which case your watch will receive a notification to upgrade the watch. If you agree, please reply this email and tell us. Thanks for your cooperation and understanding!
2)We have received many feedbacks about the training breaks. So our technical team is handling this and we would optimize the version until the end of this month. Please kindly wait for the new version. Thank you for your cooperation.
Thank you for the update! Hopefully it will be fixed soon
Also had this issue 2 times, but never at indoor cycling. Today I got new FW, hopefully it is fixed.
Freejack77 said:
Also had this issue 2 times, but never at indoor cycling. Today I got new FW, hopefully it is fixed.
Click to expand...
Click to collapse
Yesterday I drove 52km (~ 3 hours), the training was not interrupted. I will continue to test, I will write about the results after 10 workouts

Categories

Resources