A20 ROMs available for Q
1. Stock
2. GSIs
3. Ultimate Q
4. Ultimate Q S10+port
5. Ultimate Q S20 ports
6. Z-Rom
7. Infinity OS v1
Kernels
1. Stock
2. Minker 14.6 (Magisk 19.3)
3. Quantum v1
4. Quantum v2 (Magisk 19.3)
5. UltimateQ_v1
6. Eureka 2.5
7. Minker 14.7
What kernel do you use?
Vote for your ROM here
https://forum.xda-developers.com/galaxy-a20/development/a20-roms-available-q-t4143351
Stock because it was the one that comes with Infinity Rom.
I used to use MinhKer. The battery life was amazing. The overclocking is insane. It is the best perfomance kernel. Problem is its Magisk 19.3. That old Magisk does not support any module.
I have used Shumway Quantum V1. Smooth, excellent perfomance, supports Magisk 20.4. But I started facing random crashes in specific apps that I was not facing while on the older Quantum V2 kernel or on MinhKer kernel. I never got to know if the problem was a corrupt ROM or the kernel itself. Good kernel though. I will probably go back to it later. I hope he learns to overclock especially the gpu.
Stock supports Magisk 20.4. Thats it. I use it on Infinity rom and it is almost as smooth as S20 port 6 rom with MinhKer kernel. It is not as smooth as Zrom with MinhKer though.
I am patiently waiting for Momo to make a Kintsugi kernel for the A20. I hope they can port MinhKers Spectrum to the A20 too. Go Momo, go.
Roydpeter said:
Stock because it was the one that comes with Infinity Rom.
I used to use MinhKer. The battery life was amazing. The overclocking is insane. It is the best perfomance kernel. Problem is its Magisk 19.3. That old Magisk does not support any module.
I have used Shumway Quantum V1. Smooth, excellent perfomance, supports Magisk 20.4. But I started facing random crashes in specific apps that I was not facing while on the older Quantum V2 kernel or on MinhKer kernel. I never got to know if the problem was a corrupt ROM or the kernel itself. Good kernel though. I will probably go back to it later. I hope he learns to overclock especially the gpu.
Stock supports Magisk 20.4. Thats it. I use it on Infinity rom and it is almost as smooth as S20 port 6 rom with MinhKer kernel. It is not as smooth as Zrom with MinhKer though.
I am patiently waiting for Momo to make a Kintsugi kernel for the A20. I hope they can port MinhKers Spectrum to the A20 too. Go Momo, go.
Click to expand...
Click to collapse
There is also a Eureka kernel on the way.
Eureka 2.5 here
https://drive.google.com/folderview?id=131huI-6lQYC-IpJxUTMnJvoIOCN5C69Y
@physwizz Couldn't get Eureka to boot on S20 port v6.... did you try it?
jajk said:
@physwizz Couldn't get Eureka to boot on S20 port v6.... did you try it?
Click to expand...
Click to collapse
Flash Magisk 20.4 after
Gmail and Google search not working
@physwizz Flashed Magisk 20.3 as the dev provided and said to do....
jajk said:
@physwizz Flashed Magisk 20.3 as the dev provided and said to do....
Click to expand...
Click to collapse
20.4 works too
I might wait for the next version
6 votes
Minker 14.7 works with Magisk 20.4
https://drive.google.com/drive/u/0/folders/1Th6l0s0FCPUMrGeZien68IzHstrI92_o
physwizz said:
Minker 14.7 works with Magisk 20.4
https://drive.google.com/drive/u/0/folders/1Th6l0s0FCPUMrGeZien68IzHstrI92_o
Click to expand...
Click to collapse
Is there any difference between minhker 14.6 vs 14.7? Except tor the magisk
janjaninja said:
Is there any difference between minhker 14.6 vs 14.7? Except tor the magisk
Click to expand...
Click to collapse
no difference
Where can i download quantum kernel? Pls help
janjaninja said:
Where can i download quantum kernel? Pls help
Click to expand...
Click to collapse
Everything you need is here
https://forum.xda-developers.com/galaxy-a20/how-to/android-10-q-guide-a20-t4095589
physwizz said:
Everything you need is here
https://forum.xda-developers.com/galaxy-a20/how-to/android-10-q-guide-a20-t4095589
Click to expand...
Click to collapse
Thabk you very much!
physwizz v1.4
Most securities disabled
All CPU Governors enabled
Userspace is default governor
SE linux enforcing
CPU overclocked
Big: 2080
Little: 1690
Works with Magisk 21
Works with stock dbto
Eureka dbto gives gpu overclocking and CPU underclocking
I'm already using z rom v2 with minhKer Q v14.3 kernel, can I flash directly to v14.7 via twrp?
Please update link minhker kernel
Related
Elite Kernel
Unleash the beast
for Xperia Z3/Z3 Dual (need test)
First of all, I have spent a lot of hours on this project, trying to obtain the true power of this great device.
This Kernel is designed for optimize battery life and give more performance than stock kernel.
Features
Based on lastest sources, 23.5.A.1.291
DRM injection inside the Zip, you don't need flash DRM Fix, just kernel
OC up to 2,7Ghz
UC for better battery life
Optimized voltage tables and voltage control
Thunderplug v5.4, a load based hotplug and optimized for multi-core devices and it is very battery friendly with a great performance
IntelliThermal v2, a custom thermal control better than stock one
GPU overclock up to 657Mhz
Kcal control
More I/O schedulers like FIOPS, Zen, VR, BFQ...
init.d support
Power suspend driver v1.5
Build with UBERTC 4.9 and some optimizations
More stuff that I don't remember
ToDo
Add more governors
Share interactive governor tuned settings for battery and performance
More GPU optimizations
F2FS support
More battery life optimizations
Maybe Quick Chargue 2.0 support.
Maybe sound optimizations
Installation
Install my lastest TWRP (go here)
Make a backup of the partition System (MUST DO, because the kernel change some modules on system)
Select a version according to your needs. (See below)
If you have a TA partition backup:
Download EliteKernelZ3-(current version).zip and extract the boot.img on your pc.
Use the ta_poc tool by munjeni with your TA partition backup.
Rename the new_boot.img to boot.img and replace it on the EliteKernelZ3-(current version).zip
Boot on FOTAKernel recovery, with the phone power off, press at the same time power key and vol- until the phone vibrates.
Flash your EliteKernelZ3-(current version).zip with the boot.img patched.
Enjoy!
Click to expand...
Click to collapse
If you don't have a TA partition backup (so you need DRM FIX):
Boot on FOTAKernel recovery, with the phone power off, press at the same time power key and vol- until the phone vibrates.
Flash EliteKernelZ3_D-(current version).zip
Enjoy!
Click to expand...
Click to collapse
Usage with eXistenZ 5.6.5 (or similar Stock based ROMs) and Magisk
eXistenZ 5.6.5 includes a TWRP recovery inside the rom, and we don't need it since we have some options for recovery here, so for remove it download this file and flash it on recovery.
eXistenZ 5.6.5 also includes SuperSU on the rom and for correclty install magisk we need to remove it, so first of all update the SuperSU app on the Play Store, after go to the app and on settings there is an option for uninstall SuperSU and unroot the System, so tap it (Sometimes if it takes more of 3 mins, close the app and do it again), after that reboot the phone and done, SuperSU uninstalled.
Now the installation/upgrade of magisk using my kernel.
Download the lastest magisk zip and magisk uninstaller zip here, put they on SD card.
Reboot on recovery, uninstall magisk with the uninstaller zip if you have it, flash the kernel zip, flash magisk and reboot to system, and done, enjoy magisk.
Download
Z3
Z3ds
Credits
@AndroPlus
@Myself5
@DooMLoRD
@pec0ra
@dorimanx
@faux123
@Doom Slayer a lot of thanks to this great dev
@dontbelive great dev and my Z3 tester
@BlackSoulxxx
@savoca
Source
https://github.com/ShadowElite117/Xperia-Z2-Z3
Changelog
v1
First release
Click to expand...
Click to collapse
v2
Based on new 23.5.A.1.291 sources
Click to expand...
Click to collapse
v3
Added missing conservative GPU Governor
Added Simple GPU algorithm
Added Adreno idler for battery saving
Added Fauxsound v3.6
More optimizations
Click to expand...
Click to collapse
v3.4.13
Kernel made from scratch, so no special features for now (Sorry guys I do this for a better kernel).
Implemented last_kmsg for a correct bug report.
Updated linux kernel version from 3.4.0 to 3.4.13 (Correclty done and free of strange bugs).
QC 2.0 enabled (don't expect miracles, it is limited on Z3 so it works with some QC 2.0 chargers)
Full compatibility with Magisk, eXistenZ and ta_poc tool.
Click to expand...
Click to collapse
v3.4.33
Updated linux kernel version from 3.4.13 to 3.4.33.
Enabled a kernel flag for try to enable Assertive Display on Z2 (It just give me logs that help me to know what is happening).
Dropped TWRP inside the kernel, since I have build newest TWRP for leo, for FOTAKernel partition. It has more features and it is more bug free than recovery inside the kernel.
Click to expand...
Click to collapse
FAQs
Q. How I can report a bug?
A. Give me a last_kmsg, tell me your ROM, if you have Magisk, Xposed Framework or similar things and describe me the problem.
Q. How I can contact you?
A. Please don't spam me with PMs, you can contact me on Telegram: ShadowElite117
Thanks!! @ShadowElite I'm happy to see another custom kernel with some special features like AndroPlus ones for the MM version!
BTW can you make for 23.5.A.1.203 or other version(with stamina)?
Because i don't know whether this .575 kernel compatible with Stamina mode...
Glad to see another custom kernel for our Z3. It would also be amazing if you could update to. 238
Thanks!
Be patient guys, sony will release the sources of 238 soon
Looks promising, and thank you for thinking about dual sim users !
I'm eagerly waiting for d6633/83 version. Is there a way to choose GPU overclock/underclock ?
tiliarou said:
Looks promising, and thank you for thinking about dual sim users !
I'm eagerly waiting for d6633/83 version. Is there a way to choose GPU overclock/underclock ?
Click to expand...
Click to collapse
Z3 Dual version is build but I uploaded the wrong file so later I'm going to upload it and yes GPU has OC/UC and you can modify it with a kernel app like kernel adiutor or ex kernel
whoa... custom kernel for Z3 at last! great news
I'd like to test it, but I'll have to wait for .238 support
Finally!!! Custom kernel with Undervolting this is what I'm seeks ????
oh my god this is a miracle is real kernel more control over what can not believe thanks thank you very much for your contribution
I`m so happy about z3 mm custom kernel!
thx to make this kernel!
this needs unlocked bootloader ?
Wooooop finally a kernel for MM, thank you p.s thanks so much for f2fs aswell
Sent from my D6603 using XDA-Developers mobile app
lorvix said:
this needs unlocked bootloader ?
Click to expand...
Click to collapse
Of course it does. It's a custom kernel.
@ShadowElite Do i have to be on 575 base to use your kernel? And good timing i just bought my Z3 and was dissappointent that there were no custom kernels,thanks. Also can we ask for changes or features on your kernel?
Does this kernel have kexec hardboot, or is there plans for implementing it?
zhjackss said:
@ShadowElite Do i have to be on 575 base to use your kernel? And good timing i just bought my Z3 and was dissappointent that there were no custom kernels,thanks. Also can we ask for changes or features on your kernel?
Click to expand...
Click to collapse
You can have 570 575 203 238 firmware and this kernel will work, when Sony release the source of 238 I update it. Also you can see the most important features on first post and you can ask for features
Discordian_Nerd said:
Does this kernel have kexec hardboot, or is there plans for implementing it?
Click to expand...
Click to collapse
Yeah I have planned add support, I forget it on ToDo list
it is necessary to do a clean installation or can I keep my app?
There will be for Xperia Z3 compact?
Hey guys, I hope you remember me from the N-FUEL ROMS. As you must have seen the title, this thread is not about a ROM, or any GUIDE, it is a KERNEL. Fuel-Kernel focuses on extreme stability, amazing battery-life and great performance. I have been learning on kernel building for quite a time now, and this is the result of all my learnings. I will be learning more and updating this kernel frequently. Now, lets begin talking about kernel
SUPPORTED DEVICES
SM-N920C
SM-N920I
SM-N920G
SM-N920CD
SM-N920L
SM-N920K (Maybe)
SM-N9208
SM-N920T
SM-N920W8
FEATURES
-> PERMISSIVE KERNEL (Audio Mods should work now with SuperSU)
-> AROMA INSTALLER FOR DEVICE AND ROOT SELECTION
-> SAMSUNG ROOTING RESTRICTION FEATURE REMOVED
-> LOW IDLE FREQUENCY WHILE SLEEPING FOR BETTER BATTERY LIFE
-> REDUCED WAKELOCKS
-> CPU HOTPLUG ADDED FOR STOPPING CORES WHILE DEVICE SLEEPING
-> ENABLED ALL STOCK GOVERNORS
-> ADDED POWERSUSPEND AND DYNAMIC FSYNC
-> ADDED F2FS SUPPORT
-> ADDED TCP ALGORITHM
-> REDUCED KERNEL TIME TO SLEEP
-> GREAT BATTERY LIFE
-> SUPER STABLE (Not faced any random reboot as of now)
-> AND GREAT PERFORMANCE
Currently, due to initial version, the KERNEL only supports International Note 5 devices only, and if you find any issues or any other bugs with the kernel, feel free to report it, as this kernel is not perfect and will improve overtime with your precious reviews and support.
STEPS TO INSTALL
Step 1:-Download the zip and head to your Recovery.
Step 2:- Backup your data (optional)
Step 3:-Flash the FuelKernel-V2-FINAL-STABLE.zip. Make your selections and complete the AROMA installer
Step 4:- After the ROM boots, keep the device untouched for at least 5 minutes to let the kernel settle with the ROM and for better Kernel-Hardware Integration.
Step 5:- ENJOY.
CREDITS
-> Thanks @TheSickness for his amazing guide, from which I learned all this and made this kernel.
-> Thanks @TheFlash17 and @Tkkg1994 for their great support and helping me fix many bugs
-> Thanks @Ather for being so supportive, friendly, amazing friend and helping me fixing many major bugs.
-> Thanks @pelpa87, my great friend for testing this kernel.
-> Thanks @AI7777 and @jodybreeze82 for being my testers for N920T
IMPORTANT POINTS
1) Download Links and Addons will be in Post #4
2) Changelogs will be in Post #3
Kernel Source
XDA:DevDB Information
FUEL-KERNEL, Kernel for the Samsung Galaxy Note 5
Contributors
AndroidSword, @Tkkg1994, @TheFlash17, @Ather, @TheSickness
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2017-07-01
Created 2017-07-01
Last Updated 2017-08-27
Telegram group link:
https://t.me/joinchat/AAAAAEGSu4mykXwWSB3iPg
Kindly join my telegram group for faster communication...
CHANGELOGS
V2:-
-> Kernel built right from scratch and fixed all previous issues.
-> ADDED SUPPORT FOR CANADIAN/T-MOBILE NOTE 5 (N920W8/T) DEVICES
-> ADDED F2FS SUPPORT
-> ADDED POWERSUSPEND AND FSYNC SUPPORT
-> REDUCED KERNEL WAKELOCKS
-> ENABLE TCP CONGESTION ALGORITHMS
-> SELinux PERMISSIVE FIXED(All Audio Mods work now)
-> MAGISK AND SUPERSU ROOT OPTIONS IN AROMA
-> Magisk V13.3 Added
-> Amazing Deep Sleep, super smooth and highly stable..
V1:-
Initial release
DOWNLOAD LINKS
V2: https://www.androidfilehost.com/?fid=745425885120758241
V1: https://www.androidfilehost.com/?fid=745425885120745580
ROOT ADDONS
SuperSU Addon:- https://www.androidfilehost.com/?fid=817550096634783010
Magisk V12.0 Addon:- https://www.androidfilehost.com/?fid=673368273298968382
FIXES
Private Mode Fix:- https://www.androidfilehost.com/?fid=961840155545581613
Will there be G928f support?
Trilis said:
Will there be G928f support?
Click to expand...
Click to collapse
Not as of now, but in future versions there will be support for S6 Edge Plus devices as well...
SuoerSU can't be downloaded, saying the key is invalid, pls check.
Regards.
Thanks to custom kernel. Good luck. QE4 or QE2 which base?
nitol said:
SuoerSU can't be downloaded, saying the key is invalid, pls check.
Regards.
Click to expand...
Click to collapse
Thanks for reporting, reuploading to Android File Host
OttomanTR said:
Thanks to custom kernel. Good luck. QE4 or QE2 which base?
Click to expand...
Click to collapse
QE3
nitol said:
SuoerSU can't be downloaded, saying the key is invalid, pls check.
Regards.
Click to expand...
Click to collapse
Link has been changed... Sorry for inconvinience
AndroidSword said:
QE3
Click to expand...
Click to collapse
thanks to effort but not boot thanks. Khongloi rom.
OttomanTR said:
thanks to effort but not boot thanks. Khongloi rom.
Click to expand...
Click to collapse
Only for N5 Based ROM, built fully on my N-Fuel ROM, btw thanks for reporting, will add that in OP:good:
Aurorarom is N5 Based Rom,don't work. N920C
Sent from my SM-G9550 using XDA-Developers Legacy app
AndroidSword said:
Only for N5 Based ROM, built fully on my N-Fuel ROM, btw thanks for reporting, will add that in OP:good:
Click to expand...
Click to collapse
no verity opt encrypt. My case worked
my rom fuel 5
my device don't boot
تم الإرسال من SM-G955F باستخدام Tapatalk
Fuel kernel
Using Aurorarom v33 and all is working fine, no problem at all with this kernel .. !!
Been using this for a while now,i can say it has great performance, stability,and every feature that it claims,but i noticed that this kernel does not have deep sleep. Also a request,IF there is v2, could you pls add like a kernel control or smt?
I think there is something wrong with the zip file one of my friends is on your rom and told me that after flashing it restarted into recovery so i told him take out image and install from recovery then flash magisk it worked for him .
Then i try this method myself in port s8 rom it worked for me too .
I think you need to remake the zip file and add root ..
Thanks for the hard work ..
AndroidSword said:
Only for N5 Based ROM, built fully on my N-Fuel ROM, btw thanks for reporting, will add that in OP:good:
Click to expand...
Click to collapse
manngoooo9 said:
Aurorarom is N5 Based Rom,don't work. N920C
Click to expand...
Click to collapse
ahmedkna said:
my rom fuel 5
my device don't boot
تم الإرسال من SM-G955F باستخدام Tapatalk
Click to expand...
Click to collapse
smooz said:
I think there is something wrong with the zip file one of my friends is on your rom and told me that after flashing it restarted into recovery so i told him take out image and install from recovery then flash magisk it worked for him .
Then i try this method myself in port s8 rom it worked for me too .
I think you need to remake the zip file and add root ..
Thanks for the hard work ..
Click to expand...
Click to collapse
Guys, to clear things out, u need to install a root addon for the kernel to boot without ROOT addon, it wont work...
Amd secondly, it takes time for a new kernel to boot... it would not be na the case, that u install the kernel and then the device starts instantaneously... It will take at least 5 minutes to boot...
I have build this kernel on N920G while I was on N-Fuel V5, it booted, I tested all the zip files myself. And its not that it will work with my ROM. It should work with any other Note 5 based ROM...
This is Touchwiz Nougat for SM-C9000 aka C9LTECHN.
IF YOU FLASH ON C900F YOU DO AT YOUR OWN RISK. YOU HAVE BEEN WARNED
PLEASE BEFORE YOU FLASH ROMS MAKE A COMPLETE BACKUP OF YOUR SYSTEM INCLUDING EFS SO YOU DO NOT BRICK YOUR MOBILE
Modem and Bootloader
Bootloader and Modem from C9000ZHU1BRC2: https://www.androidfilehost.com/?fid=962339331458990219 (SM-C9000)
Stock Odin Firmware
C9000ZHU1BRC2: https://www.androidfilehost.com/?w=files&flid=202643
Roms
Nougat C9000ZHU1BQK1 Debloated: https://www.androidfilehost.com/?fid=889964283620764671 (C900F ported to C9000)
Nougat C9000ZHU1BQK1 DeOdex Debloated: https://www.androidfilehost.com/?fid=673791459329060973 (C900F ported to C9000)
Nougat C9000ZHU1BQL3 Debloated: https://www.androidfilehost.com/?fid=673791459329068625 (Stock HK Firmware)
Nougat C9000ZHU1BQL3 DeOdex Debloated: https://www.androidfilehost.com/?fid=817906626617955776 (Stock HK Firmware)
Nougat C9000ZHU1BRC2 Debloated: https://www.androidfilehost.com/?fid=818070582850509672 (Stock HK Firmware)
Nougat C9000ZZH1BRD1 Debloated: https://www.androidfilehost.com/?fid=674106145207491679 (C900F ported to C9000)
Kernels
Nougat Travis Kernel: https://www.androidfilehost.com/?fid=962157660013070127
Nougat RC2 Stock Kernel: https://www.androidfilehost.com/?fid=962187416754474062
Nougat RD1 Stock Kernel: https://www.androidfilehost.com/?fid=746163614322262568
Xposed for Nougat
https://www.androidfilehost.com/?w=files&flid=229076
These roms includes stock kernel by default and are slightly debloated and or deodexed. Supersu or Magisk is auto installed for root access.
Kernel Features:
Installs SuperSU/Magisk
Permissive
Added IO BFQ Scheduler
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled KNOX
Disabled TIMA
Disabled RKP
Disabled KAP
Disabled Secure Storage
Enabled CIFS Filesystem Support
Enabled NFS Filesystem Support
Increase Battery Charging Levels
Fsync Toggle (Enable/Disable)
Kernel Patched up to 3.10.108
Mild undervolt for our cpu and gpu
Use all cores to boot
F2FS
Ramdisk Optimised
Added core control
Fingerprint fixed fast wakeup enabled
Added more govs
CVE Patches updated as of JAN/2018
Logitech,Microsoft,Sony gamepad support
Kernel Source:
https://github.com/travismills82/c9lte-kernel/commits/Touchwiz-Nougat
very nice rom. very very thank you. you are exellent
ahmetk711 said:
Sen türkmüsün abi ya. Turkcell yazınca. roma tr desteği varmı
Click to expand...
Click to collapse
He is not a turk, and yes there is turkish
evet, turcke dil var
travis82 said:
This is Touchwiz Nougat for SM-C9000
Nougat C9000ZHU1BQK1: https://www.androidfilehost.com/?fid=889964283620764671
Nougat C9000ZHU1BQK1 DeOdex: https://www.androidfilehost.com/?fid=673791459329059940
Nougat Test Kernel: https://androidfilehost.com/?fid=962021903579491176
Nougat QK1 Stock Kernel: https://www.androidfilehost.com/?fid=745849072291687390
Xposed for Nougat: https://www.androidfilehost.com/?w=files&flid=229076
This includes stock kernel and is ported from C900F and is slightly debloated. Magisk is auto installed for root access. I will add more to the main thread here as I cleanup.
Click to expand...
Click to collapse
Wow! this is amazing. You are fast!
Can we flash the same supersu we use on marshmallow to root?
Edit: Thank you @AL_IRAQI
aftermath85 said:
Wow! this is amazing. You are fast!
Can we flash the same supersu we use on marshmallow to root?
Click to expand...
Click to collapse
Yeah
Stuck on samsung galaxy c9 pro screen. can you tell me how can I do that ? instructions ???
MrMutlu said:
Stuck on samsung galaxy c9 pro screen. can you tell me how can I do that ? instructions ???
Click to expand...
Click to collapse
Wipe Data
Flash ROM
Wait for it to boot up ?
which one did you flash ?, i tried it before and it boots up fine
I tried Nougat C9000ZHU1BQK1 DeOdex and I had bootloop. I tried normal and its works fine but battery is decreasing faster.
MrMutlu said:
I tried Nougat C9000ZHU1BQK1 DeOdex and I had bootloop. I tried normal and its works fine but battery is decreasing faster.
Click to expand...
Click to collapse
DeOdex takes a bit longer to boot up, so wait and see
Ok guys 1 I updated deodex try again it might of been my bad **** happens. 2. battery will drain faster till sleep kicks in for apps this should be a known fact right off the table. 3. give it a few days so stuff kicks in your usage is factored in etc. dont be a noob that types before soft kicks in you will just make me go on a wild goose chase with no info can you all give me a debug log before typing crap please seriously? 4th let's get me logs before you upset the dev's your you all are SOL sh!t out of luck on support besides SAMSUCK. Common logic guys and this go's for all devices please.
Thanks
Trav
How is the kernel working that I made please be a bit more vocal it helps me out a lot.
i did'nt used because : i installed after i have set-up fingerprint and pin, after kernel install both pin and fingerprint was unknown, so i put back twrp back-up
criszz said:
i did'nt used because : i installed after i have set-up fingerprint and pin, after kernel install both pin and fingerprint was unknown, so i put back twrp back-up
Click to expand...
Click to collapse
Yea no worries I patched the files in the rom it should be no issue, but I am waiting for the N source to drop cuz like when I worked on Tab S2 I never had an issue with N kernel vs C9. So I know they added in wifi qualcomm source I can tell cuz no more module. So I am hoping I can get the rest perfect like I did tab.
Ok, so do you guys want a port still?, or do you want me to wait for HK Firmware? Both roms work fine on the main op so I'm curious. Next kernel will be Nougat source when Samsung releases it so no more PM'S about that please.
better wait for hk and my personal opinion is to make a rom very colse to stock, remove only app who can be found on market, nothing else, and ofcourse your kernel or stock one. thank you
N source i think it will be a bit better since it will have wifi and better fp firmware in it. My odex rom has all playstore apps removed.
travis82 said:
How is the kernel working that I made please be a bit more vocal it helps me out a lot.
Click to expand...
Click to collapse
I wanted to know if you guys experience a bit slow charging, I'm using the stock kernel & 1.4G rom? ^__^
Still, I am loving our nougat c9pro. Thank you devs and guys
aftermath85 said:
I wanted to know if you guys experience a bit slow charging, I'm using the stock kernel & 1.4G rom? ^__^
Still, I am loving our nougat c9pro. Thank you devs and guys
Click to expand...
Click to collapse
Stock kernel does 1.7a max for fast charge. So it looks like that did not change. Mine I upped it to 2a and I was thinking maybe 2.4a but I don't have a charger to test 2.4 out.
You guys get any slowdowns at all when you fill up ram? I was thinking of Zram and using this instead of a pagefile since the emmc 5.1 chip is slow at read write vs ufs storage. That way all paging will be done in ram and not use the emmc chip. I'll have to try it out this weekend and see if it helps speed up the device in general.
I put odex rom, dirty install and all working fine till now. The same like in barebone prism rom codes like *#06# not working. Must be samsung fault. Very good odex room, no need deodex for me. Also Xposed part from grenify cannot be activated, must be Xposed fault. Thank's Travis82 for rom and hop for hk one soon.
When we recieve HK firmware I have a lot that i will do to speedup the rom and kernel I tested on my port and it was much much much... faster. So until then just wait it up. I noticed same issue as in M that if cores are defined for hotplug that the big cores never slept well to 400mhz so I'll try to get that fixed up when I get source and a new firmware to play with also.
Hi everyone,
I am Luca from France. Today, it's my birthday, I am already 16 and I got a Nexus 5 32GB.
I tried installing Hammerheadmon kernel (Download at: https://build.nethunter.com/nightly...nter-hammerheadmon-nougat-2019.03-13-0514.zip ). I noticed it was based on ElementalX.
So I downloaded latest ElementalX nougat build for Nexus 5 ( https://www.androidfilehost.com/?fid=962187416754455497 ), and tried replacing "elex.zImage" by "zImage-dtb" of hammerheadmon kernel's zip.
After flashing the original hammerheadmon nethunter kernel, I flashed the modified ElementalX zip with hammerheadmon's zImage. And I successfully got my internal wifi card in monitor mode while my CPU was overclocked and undervolted.
I am running Unofficial LineageOS 14.1.
Download the 2 zips to flash below.
Note: You have to flash original Nethunter hammerheadmon kernel first in order to install all drivers. Obviously, you can't flash ElementalX edited zip first, because Nethunter kernel will replace you actual zImage-dtb in you boot partition that allows overclock by its own that doesn't.
PS: Congrats to @flar2 for developping ElementalX. I think it is amazing that in TWRP you can patch zImage for higher/lower voltages. I still haven't figured out how he managed to do that.
lucahack said:
Hi everyone,
I am Luca from France. Today, it's my birthday, I am already 16 and I got a Nexus 5 32GB.
I tried installing Hammerheadmon kernel (Download at: https://build.nethunter.com/nightly...nter-hammerheadmon-nougat-2019.03-13-0514.zip ). I noticed it was based on ElementalX.
So I downloaded latest ElementalX nougat build for Nexus 5 ( https://www.androidfilehost.com/?fid=962187416754455497 ), and tried replacing "elex.zImage" by "zImage-dtb" of hammerheadmon kernel's zip.
After flashing the original hammerheadmon nethunter kernel, I flashed the modified ElementalX zip with hammerheadmon's zImage. And I successfully got my internal wifi card in monitor mode while my CPU was overclocked and undervolted.
I am running Unofficial LineageOS 14.1.
Download the 2 zips to flash below.
Note: You have to flash original Nethunter hammerheadmon kernel first in order to install all drivers. Obviously, you can't flash ElementalX edited zip first, because Nethunter kernel will replace you actual zImage-dtb in you boot partition that allows overclock by its own that doesn't.
PS: Congrats to @flar2 for developping ElementalX. I think it is amazing that in TWRP you can patch zImage for higher/lower voltages. I still haven't figured out how he managed to do that.
Click to expand...
Click to collapse
Edit : After thinking about it, I think ElementalX installer maybe does not edit zImage, but ramdisk only for frequency. It'd be really complicated to patch an ELF file. So it could mean that you don't need to flash the 1st zip first
Does it work for pie
bagajohny said:
Does it work for pie
Click to expand...
Click to collapse
No. And unfortunately this kernel source code was deleted
bagajohny said:
Does it work for pie
Click to expand...
Click to collapse
I am not sure, but maybe it can work on a pie GSI
https://forum.xda-developers.com/go...ment/repartition-nexus-5-repartition-t3844395
Ever since I installed a custom rom on a closed-source Mediatek phone, I think EVERYTHING is possible lol
Please, we need a new kernel for Pie roms!
The exkernel base is awesome to overclock! For me is the only kernel on Oreo days!
I have the paid exkernel and is a bummer to loose Nexus 5 development...
Any good soul to work this for pie? I have the latest exkernel aroma installer for oreo in my folder.
Bro please add GPU overclock (650) in your kernel by which it is easy to play game like pubg smoothly. You can get the code for the same in true sight kernel 4.4 ( not updated from 2017 )
Sorry if any mistake
https://forum.xda-developers.com/google-nexus-5/orig-development/kernel-truesight-v1-5-t3329986
vikaseth said:
Bro please add GPU overclock (650) in your kernel by which it is easy to play game like pubg smoothly. You can get the code for the same in true sight kernel 4.4 ( not updated from 2017 )
Sorry if any mistake
https://forum.xda-developers.com/google-nexus-5/orig-development/kernel-truesight-v1-5-t3329986
Click to expand...
Click to collapse
I will try patching his kernel for nexmon
Need oreo kernel Hammerheadmon sorry muy bad english
does anyone know how I can make my kernel oreo work in hammerheadmon? thanks
any solution for hammerheadcaf?
omargdl80 said:
does anyone know how I can make my kernel oreo work in hammerheadmon? thanks
Click to expand...
Click to collapse
You have to look into the Nexmon repo and look if there is a option to apply it on a Oreo kernel
https://github.com/seemoo-lab/nexmon
I compiled a new Oreo kernel for NetHunter from the DirtyUnicorns github repo, but can't unfortunately release it here with hindsight of the general disregard of this amazing custom rom.
---------- Post added at 07:45 PM ---------- Previous post was at 07:43 PM ----------
jonnie77 said:
any solution for hammerheadcaf?
Click to expand...
Click to collapse
If you can find a usable repo with a according source, I would gladly give it a try.
lucahack said:
I will try patching his kernel for nexmon
Click to expand...
Click to collapse
Yes, we need that 650 gpu overclock??????
I downgraded my os to MIUI 9.6.25 for performance.
It is android Oreo (8). I don't want to upgrade to MIUI 10.
But I want to overclock my device (cpu and GPU).
And for that, I want a custom kernel.
I know everything about flashing and risks about it.
I just want the kernel zip or img file.
If anyone know any overclocking kernel for miui 9 android 8, please tell me
I shall be thankful to you
i tried to go back to miui 9.6.25 but touch didnt work so i had to flash miui 11 where everything works fine but with less battery performance compared to oreo
Well, the battery backup is amazing in these 5 days.
I am not gaming currently but will play in winter vacation.
Benchmark is going good with stock kernel too. (Got a custom thermal for it).
Also got a force Fast charge zip 3300 ma, which is doing good. 0 - 80 in 1 hour.
No touch issue or anything.
But still finding a kernel for overclocking cpu and GPU.
Currently Franco's download website is down.
In 2018 he posted in XDA that he created custom kernel for MIUI 9 poco F1. I am waiting for that site to reopen.
If someone know about any other site to download custom kernel for MIUI 9, please tell me
Nikhil_Kumar_001 said:
Currently Franco's download website is down.
In 2018 he posted in XDA that he created custom kernel for MIUI 9 poco F1. I am waiting for that site to reopen.
If someone know about any other site to download custom kernel for MIUI 9, please tell me
Click to expand...
Click to collapse
No gravity Kernel is best and safe overclocked kernel, you can also download franco kernel manager or any kernel to custom overclock values for cpu and gpu
magaedy said:
No gravity Kernel is best and safe overclocked kernel, you can also download franco kernel manager or any kernel to custom overclock values for cpu and gpu
Click to expand...
Click to collapse
I have FK manager.
I tried no gravity kernel but then stuck on black screen during boot. I think that it is not supported by MIUI 9.
If you know any version of no gravity that is supported by MIUI 9 then please share the link.
No gravity u must use with custom rom only
Nikhil_Kumar_001 said:
Well, the battery backup is amazing in these 5 days.
I am not gaming currently but will play in winter vacation.
Benchmark is going good with stock kernel too. (Got a custom thermal for it).
Also got a force Fast charge zip 3300 ma, which is doing good. 0 - 80 in 1 hour.
No touch issue or anything.
But still finding a kernel for overclocking cpu and GPU.
Click to expand...
Click to collapse
Hey, what custom thermal are you using? If possible, could you share the link to the same?
ayush2901 said:
Hey, what custom thermal are you using? If possible, could you share the link to the same?
Click to expand...
Click to collapse
Here is the link to the GitHub forum/thread - https://github.com/max20091/PocoF1-Thermal-Unlock
And here is the download link (from the forum only to ease your finding ) - https://github.com/max20091/PocoF1-Thermal-Unlock/releases/download/v1fix/PocoF1-Thermal-Unlock.zip
Flash via magisk, reboot and you are ready to rock games.
Nikhil_Kumar_001 said:
Here is the link to the GitHub forum/thread - https://github.com/max20091/PocoF1-Thermal-Unlock
And here is the download link (from the forum only to ease your finding ) - https://github.com/max20091/PocoF1-Thermal-Unlock/releases/download/v1fix/PocoF1-Thermal-Unlock.zip
Flash via magisk, reboot and you are ready to rock games.
Click to expand...
Click to collapse
Hey thanks man! Surely didn't expect such a quick response . If I'm not wrong, you used the force fast charge module from this link, right? : (https://forum.xda-developers.com/poco-f1/themes/fc-force-fast-charge-module-poco-f1-t4095679/amp/)
ayush2901 said:
Hey thanks man! Surely didn't expect such a quick response . If I'm not wrong, you used the force fast charge module from this link, right? : (https://forum.xda-developers.com/poco-f1/themes/fc-force-fast-charge-module-poco-f1-t4095679/amp/)
Click to expand...
Click to collapse
Yes!!! I used that fast charge module only.? That 3300 ma one and it is going good for me. Usually it shows 3100 - 3200 ma while charging in Franco battery manager.
0-85 % and 10-90 % in 1 hour while connected to internet.
But I charge my phone as soon as it goes below 30%.