please help me to fix my tablet phab plus
it dead
no power
no led charging
thanks
kedamsa said:
please help me to fix my tablet phab plus
it dead
no power
no led charging
thanks
Click to expand...
Click to collapse
try plugging it into a computer and see if it detects anything.
if it does, try flash a firmware.
if it doesn't, leave it there for a bit to see if it does turn on.
Related
Hi
my acro s stop working for some unknow reason. so i turned it off
and try to turn on. but it couldnot turn on. i used the combination of
force to restart keys, and nothing happened. when i plugin the charger,
you can see tiny flashing red light on the LED. anyone knows how to solve
this problem?
thanks
Ummm... Pług it into charger and wait few minutes?
Sent from my ST25i
Antecz said:
Ummm... Pług it into charger and wait few minutes?
Sent from my ST25i
Click to expand...
Click to collapse
i did that for over 6 or 7 hours. do you think it is the battery completely off or it is bricked?
Heh,, so what did you do just before brick? Bad flash? Dropped it? Dog ate it? More info
gazhead said:
Heh,, so what did you do just before brick? Bad flash? Dropped it? Dog ate it? More info
Click to expand...
Click to collapse
i installed a custom rom, and it started losing power gradually even when it is connect to the computer. next day
it was like the condition rite now. you can see the red light, but the phone cannot boot, neither enter fastboot.
Try this: Not sure if it will work...
1) Just connect it to usb cable to pc... Leave it for few hrs..
2) Then open Sony PC Companion and try repair...
I Accidentaly bricked my gf acro s . Ended in bootloop and i did this.. It Worked.
try to charge with dock, it helped for me only acro s if it helped, please, hit thanks
dedgela said:
try to charge with dock, it helped for me only acro s if it helped, please, hit thanks
Click to expand...
Click to collapse
Thanks,
I had a nasty problem, not charging with a new rom and not being able to fastboot etc, only a few seconds in recovery.
i searched my whole house for the acro-s dock, and plugged it in, then also plugged the usb on the phone to a pc usb port, don't know if that added some power, but this gave it enough power to instantly boot & charging... So now I can install a decent rom again.
Hello all,
My GS3 is not able to boot up. No matter if I press only the power button or press DOWN+HOME+POWER, the screen just keep black. Nothing responses.
I have found many threads about bricked or SDS etc, there's no any help.
Do you guys have any suggestions? Becacuse I am abroad recently and not easy to send it to the service center in UK.
nothing else to do
Try another battery, leaving it plugged into the charger for an hour.
Does the red light or charging screen appear when you attach to the charger?
If download mode doesn't work and the above also fails then it's dead and only service can help you.
boomboomer said:
Try another battery, leaving it plugged into the charger for an hour.
Does the red light or charging screen appear when you attach to the charger?
If download mode doesn't work and the above also fails then it's dead and only service can help you.
Click to expand...
Click to collapse
Thanks for your info.
I tried all above methods, but all failed. I hope that the phone is still in warranty. I bid it on eBay a year ago and have no idea about how long the previous owner had used it.
So this is my story. I compiled aosp and flashed my new rom, clicked reboot and boom. Nothing works.
When I use a charger / usb red light notification flashes. Also, sony pc companion sais (null) connected.
It won't turn on in fastboot, tried but I have no blue light notification.
The phone vibrates when I press power. Could this be because of a bad kernel ?
I will let my phone charge for a while, to eliminate potential causes.
Thanks .
Red LED usually signifies a soft brick.
http://forum.xda-developers.com/showthread.php?t=1849170
hush66 said:
Red LED usually signifies a soft brick.
http://forum.xda-developers.com/showthread.php?t=1849170
Click to expand...
Click to collapse
I don't know anything about the red LED. Googled a bit and many told that the phone is unrecoverable.
I let it charge over night, but it's not responding anymore. No vibration, no led no nothing.
Costinutz32 said:
I don't know anything about the red LED. Googled a bit and many told that the phone is unrecoverable.
I let it charge over night, but it's not responding anymore. No vibration, no led no nothing.
Click to expand...
Click to collapse
It's recoverable, you just need some patience (happened to me once). Check the methods in the link above.
hush66 said:
It's recoverable, you just need some patience (happened to me once). Check the methods in the link above.
Click to expand...
Click to collapse
Do you have a magnetic charging cable ?
Costinutz32 said:
I don't know anything about the red LED. Googled a bit and many told that the phone is unrecoverable.
I let it charge over night, but it's not responding anymore. No vibration, no led no nothing.
Click to expand...
Click to collapse
The link above worked for me when i bricked my phone. Give it a try bud, all seems hopeless, but give it some time and it will work!
Frantiic87a said:
The link above worked for me when i bricked my phone. Give it a try bud, all seems hopeless, but give it some time and it will work!
Click to expand...
Click to collapse
How can I follow those instructions if the phone won't charge ? Should I give it another day plugged in the wall charger ?
The main thing I want to do is go in fastboot and flash another kernel, as I know it is the main problem.
But the phone doesn't charge. No response whatsoever. I had it charging for 8 hours or so, still nothing.
If anyone has a magnetic charger, can you tell me which one is the ground and which one is the + ?
It doesn't matter if you're charging via magnetic cable or normal USB cable.
As described in the thread that I linked you to, a red LED means that the phone is charging in 'low battery level charge mode'. Read post 2 of the thread, with the header "Now after the phone has reset and you have the red led". You just need to charge your phone longer.
hush66 said:
It doesn't matter if you're charging via magnetic cable or normal USB cable.
As described in the thread that I linked you to, a red LED means that the phone is charging in 'low battery level charge mode'. Read post 2 of the thread, with the header "Now after the phone has reset and you have the red led". You just need to charge your phone longer.
Click to expand...
Click to collapse
Will try that.
Thanks for your brief and fast responses!
Same Problem
Costinutz32 said:
Will try that.
Thanks for your brief and fast responses!
Click to expand...
Click to collapse
I have the same problem, have u fix it? can u explain me please? :crying::crying::crying:
Hello guys, I just found my old Elephone and wanted to revive it for fun.
The thing is that it seems totally dead, it doesn't even charge and even I press the power button for 1-2 min nothing happens.
Any tips?
Thanks in advance!
h320 said:
Hello guys, I just found my old Elephone and wanted to revive it for fun.
The thing is that it seems totally dead, it doesn't even charge and even I press the power button for 1-2 min nothing happens.
Any tips?
Thanks in advance!
Click to expand...
Click to collapse
The battery is probably fully discharged, connect to a pc, so it gets a lower voltage current which might allow to charge it..
Hi all, trying to fix my old kenzo device I bricked a few months ago. It originally had just the red LED now it has nothing, can't boot into any modes, tried edl pins multiple PCs still do not recognise the Phone, is there a guide or tip I have missed, please help
ryevita said:
Hi all, trying to fix my old kenzo device I bricked a few months ago. It originally had just the red LED now it has nothing, can't boot into any modes, tried edl pins multiple PCs still do not recognise the Phone, is there a guide or tip I have missed, please help
Click to expand...
Click to collapse
did you try to remove the zener diode?
got mine working after i removed it..
ryevita said:
Hi all, trying to fix my old kenzo device I bricked a few months ago. It originally had just the red LED now it has nothing, can't boot into any modes, tried edl pins multiple PCs still do not recognise the Phone, is there a guide or tip I have missed, please help
Click to expand...
Click to collapse
Disconnect the battery and plug your device in to a PC or laptop and check it with 2-3 different working data cables, if you get a Mi logo then it means the batter was/is dead. if it still doesn't work and you don't get anything on the screen then try to flash a MIUI Stock firmware and see what it says. i had the same problem apparently but in my case the EmmC died on my mobo so i replaced it and it's been working fine for 4 moths now.
Not seen that mentioned before willing to give it a try... Any links on how to do it... Google didn't bring anything back only charging boards? Sorry that was in reply to the zener diode comment.
Tried unplugging battery multiple pcs and cables no life from screen at all..
Thanks found the diode removed it and now I have flashing red led!
ryevita said:
Thanks found the diode removed it and now I have flashing red led!
Click to expand...
Click to collapse
glad it worked for you
btw just charge it in a wall adapter to get your battery enough power to flash roms..
jmvitan said:
did you try to remove the zener diode?
got mine working after i removed it..
Click to expand...
Click to collapse
how did you do ? pls share steps
Ravix3 said:
how did you do ? pls share steps
Click to expand...
Click to collapse
any update? it looks like i had the same problem but fixed it. how about you