I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Pull out your battery and then reinsert and use buttons to go to recovery ( volume down, home n power)
Sent from my LG-P500 using xda premium
JollyKing said:
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
Click to expand...
Click to collapse
if you have an X10mini (notPRO) and tried to install CM7 (i.e. miniCM7-2.1.3 or official CM)
you obviously forgot to read the first lines of my FAQ, so do it, and then, you'll have fastly working phone
Im not getting back into recovery at all :/ jus keeps rebooting to sony ericson screen
evil_chris said:
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Click to expand...
Click to collapse
I am Not seeing A repair function with the pc companion???
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
if you really want to use miniCM7 and have your BL unlocked, just flash nAa's kernel with flashtool
if not, you absolutely need to start from the beginning using SEUS, sorry (post 3 of my FAQ, you'll get links to debrick )
and read carefully everything before making mistakes
I was in the same situation. I installed minicm7 pro v20 and then it entered infinity loopboot. With luck, i pressed the menu button for some seconds just before "sony ericssom" appear and then i entered in the CWM 3.2 menu, where i did a restore.
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
the repair funcition is with the phone unpluged go to Pc companion > Suport zone > update your software > repair phone> then just folow what it say
try sony Ericsson update service it works for me :L
I have the same condition with neo V. PLS HELP ME TOO !!
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Sturdy_99 said:
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Click to expand...
Click to collapse
Don't worry if the Flashtool says 'USB debugging is disabled' if you enabled it before flashing it,it is because the Flashtool got a problem with connecting to your USB debugging feature in your phone...
About the bootloop,it is considered a softbrick as it can be fix as long as you can connect your phone to your PC in Flashmode
How to recover your phone back :
1.Go to wotanserver
2.Register and verify email if requested
3.Download wotanclient in the website
4.Download the needed driver in the website
5.Make sure you installed the thing that is needed thing before proceed
6.Open wotanclient
7.It will now start in Startup tab,wait for it if your wotanclient is auto updating
8.Now,after your wotanclient is updated,it will now currently in the Phone detection tab and asking you to connect your phone service button (for Xperia Neo V,I think it is back button)
9.Press and hold the service button and connect your phone to computer using USB
10.It will now connecting to your phone,and go into Phone setting tab
11.Enter your registered account and password,and click the 'Update' option and you should have a 1 credit result and something like that
12.After that,it will go to the setting tab,choose what your phone model is,and choose which phone firmware would you like to recovered into your phone
13.Choose your country Generic for the best result for your phone after recover your phone
14.Now,it will now download the file for your phone,it should take around 1-2 hours
15.After downloading,it will flash the phone automatically
16.After the phone got flashed,it will ask you to disconnect your USB and reboot your phone
17.Reboot your phone,and it will take sometime for the phone to create cache for your new system
18.Set your phone setting like the first time you buy your phone
19.?????????????
20.PROFIT
If you think my post help you,don't forget to click the Thanks button
I wil try it out.
THANKS FOR THE SOLUTION. I will try it out. Hope it WORKS...
Dude getting stuck at phone detection
i rooted my x10 mini and flashed it it stuck at se logo page.
wat to do now
i cannot use pc campanion without going to menu screen
i hav back up of previous os by using xrecovery wat shall i do
Plz help me.
My xperia x10 not booting.it stocks on sony ericsson logo.
what i did is....
1) My phone is rooted
2) i have xrecovery 0.3 installed
3) I installed latest doom kernel for locked bootloaders
4) i am tryed to update rom to latest CosmicUI rom found on Development forum
5) i forget the that rom only for unlocked bootloaders
6) i am not change the kernel to CosmicUI kernel.
7) after installing rom my phone rebooted and stock on sony ericsson logo
8) i am connected the phone to PC.but it is not detected.
9) i installed xparia x10 ADB & Flash drivers, Flashtool, Sony ericsson PC companion.Still it is not detected in Flash tool and Sony PC Companion.PC shows Unknown device.
Please help me to solve this,
Sorry for my bad english.
Try uninstall Pc companion & drivers and install them again, maybe it detects your phone after that
do not panic. It happened to me last week. Phone won't register on pc until you connect in flash mode to flash a new FW with flashtool. You may already know this but
1)DON'T CONNECT PHONE
2) Start FlashTool in flash mode, choose ur ftf, click ok.
3)Wait until the screen prompts you to plug in ur device.
4)Hold the back button while plugging the usb cable into the phone (make sure it is connected to pc first though)
5) Phone should start flashing, wait until it completes.
If step 5 doesn't take try again from step 2.
AGAIN DON'T WORRY!! Happens all the time.
hit thanks when ur done
Sony erricson xperia x1a- hangs after booting
Hi my sony erricson xperia x1a(Windows mobile6.1 os ) hangs after booting, Ive installed few apps before its gets hanged.
Let me know the solution for this.
devon411 said:
do not panic. It happened to me last week. Phone won't register on pc until you connect in flash mode to flash a new FW with flashtool. You may already know this but
1)DON'T CONNECT PHONE
2) Start FlashTool in flash mode, choose ur ftf, click ok.
3)Wait until the screen prompts you to plug in ur device.
4)Hold the back button while plugging the usb cable into the phone (make sure it is connected to pc first though)
5) Phone should start flashing, wait until it completes.
If step 5 doesn't take try again from step 2.
AGAIN DON'T WORRY!! Happens all the time.
hit thanks when ur done
Click to expand...
Click to collapse
hi everyone
i have a problem as i said at the title
i reset my phone with the pc companion than i flash the wrong rom which is device x10 and version v1
so it didnt work . Sola got stuck in bootlop
flashtool doesnt work. i tried to repair with pc companion as you guess it didnt work
fashtool said device disconnected, be sure about to mtp mode and start with the debugging off
ı hope somebody help me
...
Turn off ur device, remove battery or press power+volume up 5 sec
Download right ftf using XperiaFirm or whatever u want
Then flash, it's simple like 1+1
hi .I just bought an Xperia L (C2105); after few days of using and downloading guge number off apps it got freezed and when i tried to restar it my xperia shows nothing but the Sony Logo until the battery drains so i tried using flashtool but when i select the firmware it says this
x1.this bundle is not valide
x2.thisbundle is not valide
.......
.......
so i searshed and found that there is another tool from sonymobile called emma to flash sony devices and i downloaded it but whenever i connect the phone to the laptop it says this device is locked and cannot be flashed try to unlock the bootloader
so again i went to flashtool and pressed unlock bootloader and connected the Xperia L but after a few seconds the flashtool said that my phone bootloader cannot be officialy unlocked. and i need to check uknown sources and debug mode but thats clearely impossible as the phone is stuck
so i went to pc companion and pressed update service and connected the device and it detected it as soon as i plug the usb cable but it says that i need to update my pc companion and get the version suitable for my device which im sur i downloaded the exact vesion for the xperia L from the sony mobile website
So basicaly non of the tree programmes allow me to flash my xperia L and now i dont know what to do im stuck with an unusable phone .
is there something im missing here flashing a device should be a peace of cake but this device is a hell of headacke
any help please
Hello friends, i have a problem with an old Sony LT18i from a cousin, he brought it to me because he has the China Mobile variant with no GApps and android version was 2.3.4, i thought it might be solved with a simple flash via FLashtool, but when i've completed the downloading of the ftf file and went to flashtool to flash it, when the flashtool ask me to put it in flashmode pressing the back button and connecting to usb the phone led only blinks of 0.5 sec and then boots into normal mode.
Tried the same with fastboot and then i got the same blink for 0.5s with no detection at all. That surprised me as well i've have flashed succesfully other Xperia devices with no problems of led blinks at all. Now my problem is that later i tried to root the phone and installing CWM to flash another ROM or GApps package, and when i finished to install the recovery now the phone is bootlooping and never gets to boot normally.
I've tried with 4SE dongle to flash it via Testpoint and it doesn't work as the phone manufacture model is 12W13 (new security) which the dongle doesn't support, tried with S1 Tool with version 28II215 and 080714 and i only get PHONE NOT SUPPORTED IN THIS MODE when i try to flash and when trying to unlock the bootloader it gives me NOT SUPPORTED MCU REVISION.
The phone was working well until the CWM installation except for the flashmode and fastboot mode, now i really need to flash it and i can't find a way to do it, i also have RIFF JTAG and Z3X Easy JTAG box but no JTAG available for this model except for Medusa Box which only supports phones with manufacture date less than 12W10, i was wondering if there´s a way to access via QHUSB_DLOAD mode doing the testpoint to manually flash partitions to device or something like that. If you might have a workaround or a solution to at least let the phone in the way it was it will help me a lot. Thanks in advance, sorry if my english isn't so great.