Hello all,
I hope someone can help me with this headache.
I downloaded and tried to install the EU rom from here https://xiaomi.eu/community/threads/download-link-for-curtana.56901/ on my Curtana using LRTWRP. However, I got an error during installation, I pushed reboot to recovery. Now the phone reboots so quickly that I cannot reach any fastboot or recovery mode. Has anyone had this problem before? any way to fix it?
Keep holding down power + vol down. That gets the phone into fastboot
do you see the redmi logo at all?
kgoerbig said:
Keep holding down power + vol down. That gets the phone into fastboot
Click to expand...
Click to collapse
Thanks. I tried this with no luck, it just keeps reseting.
_4PERTURE_ said:
do you see the redmi logo at all?
Click to expand...
Click to collapse
Yes, I see the initial logo for a fraction of a second and then it resets.
hhadi said:
Hello all,
I hope someone can help me with this headache.
I downloaded and tried to install the EU rom from here https://xiaomi.eu/community/threads/download-link-for-curtana.56901/ on my Curtana using LRTWRP. However, I got an error during installation, I pushed reboot to recovery. Now the phone reboots so quickly that I cannot reach any fastboot or recovery mode. Has anyone had this problem before? any way to fix it?
Click to expand...
Click to collapse
You probably flashed wrong zip file. Unfortunately your unit is hard bricked now and the only option left now is Service Center
goldenevil47 said:
You probably flashed wrong zip file. Unfortunately your unit is hard bricked now and the only option left now is Service Center
Click to expand...
Click to collapse
Thanks for the reply. It is so annoying to have to send it back. Also the guarantee is void since I unlocked the bootloader, right?
hhadi said:
Thanks for the reply. It is so annoying to have to send it back. Also the guarantee is void since I unlocked the bootloader, right?
Click to expand...
Click to collapse
Don't tell them that you unlocked BL and I think I read somewhere that unlocking BL in Xiaomi doesn't void warranty. Anyways they can fix the device through EDL flash
Related
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
vipinlahoti said:
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
Click to expand...
Click to collapse
first question, can you boot to bootloader/fastboot?
w1040 said:
first question, can you boot to bootloader/fastboot?
Click to expand...
Click to collapse
No, cant,
no bootloader just led on when attaching cable.
and PC detects as "unknown device attached"
vipinlahoti said:
No, cant,
no bootloader just led on when attaching cable.
and PC detects as "unknown device attached"
Click to expand...
Click to collapse
I think your only option is to restore it via RIFF JTAG... I don't know another way...
vipinlahoti said:
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
Click to expand...
Click to collapse
Is ur device booting in Qualcomm diagnostic mode.....?
If ur phn does then there is a possibility of flashing stock Rom
If u don't know..just Google it.....!
Sent from my ST25i using Tapatalk 2
@ OP, did you charge it?
Sent from my awesome fridge
yes, from last 2 hrs its on charging.
I donno what is RIFF JTAG and Qualcomm diagnostic mode
googling it....
If you haven't done it yet, pull out the battery, put it back in and try to get into bootloader or recovery. (the pulling out the battery part is important)
by the way, what exactly is happening when you try to boot? please describe step by step what is happening. And what do you mean by boot "into hboot"?
And how did you try to go back to stock? Did you even get into the stock rom. Didn't you just forgot to flash the boot.img when going back to stock?
DeXeS said:
If you haven't done it yet, pull out the battery, put it back in and try to get into bootloader or recovery. (the pulling out the battery part is important)
by the way, what exactly is happening when you try to boot? please describe step by step what is happening. And what do you mean by boot "into hboot"?
And how did you try to go back to stock? Did you even get into the stock rom. Didn't you just forgot to flash the boot.img when going back to stock?
Click to expand...
Click to collapse
to flash a rom I
1. Switched off my phone,
2. hold power + vol down (to boot into bootloader recovery), just blank screen no boot.
3. hold power button + vol up, again just blank screen no boot.
4. when us connected led lights up, and PC detects as "unknown device found".
not booting at all.
vipinlahoti said:
to flash a rom I
1. Switched off my phone,
2. hold power + vol down (to boot into bootloader recovery), just blank screen no boot.
3. hold power button + vol up, again just blank screen no boot.
4. when us connected led lights up, and PC detects as "unknown device found".
not booting at all.
Click to expand...
Click to collapse
but did you remove the battery and put it back in or not? If so and it still does not want to go into bootloader, it really is bricked.. Bring it to a service center for repair..
DeXeS said:
but did you remove the battery and put it back in or not? If so and it still does not want to go into bootloader, it really is bricked.. Bring it to a service center for repair..
Click to expand...
Click to collapse
Tried already but no luck,
Damn mine is rooted and bootloader not sure whether they repair or not
vipinlahoti said:
Tried already but no luck,
Damn mine is rooted and bootloader not sure whether they repair or not
Click to expand...
Click to collapse
If its hard bricked ,they wouldn't no.
..
navmad
mate maybe the screen of your phone has the problem...thats why it shows only blank...
mhb92 said:
mate maybe the screen of your phone has the problem...thats why it shows only blank...
Click to expand...
Click to collapse
That depends, if the device doesn't even shake, then it's not the screen.
Sent from my awesome fridge
Guys, I dont think having any screen problem, bcoz, no vibration during powering on, just a blank screen btw I have given to service center,
just finger crossed
If I press power + volume down all I get is a picture of a penguin, which stays there until the phone runs out of battery.
Does anyone know how I fix this?
pane32 said:
If I press power + volume down all I get is a picture of a penguin, which stays there until the phone runs out of battery.
Does anyone know how I fix this?
Click to expand...
Click to collapse
This is normal I don't think you can do anything with that, what do you actually want to achieve?
Same here. When I try to install TWRP all I get is the tux penguin. Trying to root the x800.
shadow78 said:
This is normal I don't think you can do anything with that, what do you actually want to achieve?
Click to expand...
Click to collapse
I was trying to root the phone and get a new ROM but I've since managed to do both.
I wrote a very quick guide in another thread, for anyone else experiencing the same problem.
pane32 said:
I was trying to root the phone and get a new ROM but I've since managed to do both.
I wrote a very quick guide in another thread, for anyone else experiencing the same problem.
Click to expand...
Click to collapse
The guide in the other thread didn't exactly tell you how to get around the tux penguin issue.
Darkness2748 said:
The guide in the other thread didn't exactly tell you how to get around the tux penguin issue.
Click to expand...
Click to collapse
Yes it does. I mentioned the penguin specifically:
Seeing the penguin is normal. I have managed to fix the issues I have and I am running a custom ROM by Cuoco92, all thanks to the help I got from @simidisc.
I will assume that you have installed all appropriate USB drivers.
1. Visit http://bit.ly/1Q6irPH and download SEZIONE FIRMWARE and SEZIONE RECOVERY. Don't worry about this being in Italian - I don't speak Italian and managed no problem.
2. Copy the zip file from Sezione Firmware to your phone.
3. Unzip the the recovery file on your computer and connect your phone to your computer.
4. After unzipping TWRP, run "Install Over Fastboot".
5. Your phone will reboot and you will see THE PENGUIN. Just press VOLUME UP + POWER at the same time and your phone will reboot to TWRP.
6. You should now be able to flash the ROM, making sure to wipe cache, dalvik etc.
help needed..
bro..can you give the link thread..because i am also facing same problem installing twrp.. the penguin logo come and then boot automatically to the original state..thankx
ragib1982 said:
bro..can you give the link thread..because i am also facing same problem installing twrp.. the penguin logo come and then boot automatically to the original state..thankx
Click to expand...
Click to collapse
Did you follow the steps above? When you see the Penguin, did you press VOL UP + POWER?
If so, what happened? This should boot to TWRP.
I did but nothing happen
ragib1982 said:
I did but nothing happen
Click to expand...
Click to collapse
Sorry, but I don't know what to do now.
Have you been on http://www.letv.re/? It is a forum dedicated to Letv phones and someone there might have a solution.
TWRP Fastboot
I am having the same problem.
The penguin comes on then no matter what I do, it either just reboots (if I keep holding power down) and continues to do this for ever, or boots into the LeEco recovery, if I press volume up and power, or just boots into EUI rom if I do nothing.
Any suggestions?
Phone is not rooted.
ragib1982 said:
bro..can you give the link thread..because i am also facing same problem installing twrp.. the penguin logo come and then boot automatically to the original state..thankx
Click to expand...
Click to collapse
KarlDroid said:
I am having the same problem.
The penguin comes on then no matter what I do, it either just reboots (if I keep holding power down) and continues to do this for ever, or boots into the LeEco recovery, if I press volume up and power, or just boots into EUI rom if I do nothing.
Any suggestions?
Phone is not rooted.
Click to expand...
Click to collapse
Friend, did you solve Your problem. I have the same.
When i ENTER TO FASTBOOT MODE (Vol- +power) penguin appearf for few seconds and system starts to eui. I cant flas TWRP and do nothing. Few seconds of penguin and restart. ehhhh..
I have a Huawei Mate 10 Pro that is unlocked but won't install Lineage OS. I have tried using the Huawei Update Extractor and flashing ramdisk, recovery ramdisk, and system.img. I have flash Lineage OS several times. Now I am stuck on the "Your device is unlocked" screen with no action happening. If I hold Volume Up to enter the e-recovery, I am only present with three options, with only two doing anything which are working: Restart and Shutdown (this is the only way I can shut down the device). There is no wipe data option. I know I am running a BLA-L29 model and pretty sure it is the European model. I installed TWRP but getting to that screen is difficult as each time I hold a button combination (Volume Up + power button or Volume Down + power button), nothing happens (I do know it is installed as I have reach the screen several times on my device). Any suggestion? I would like to install Lineage but I would be fine returning to stock OS. I apologize for the redundancy of this thread (potentially) but I couldn't find the answer anywhere, and nothing specific to my situation.
afjohn483 said:
I have a Huawei Mate 10 Pro that is unlocked but won't install Lineage OS. I have tried using the Huawei Update Extractor and flashing ramdisk, recovery ramdisk, and system.img. I have flash Lineage OS several times. Now I am stuck on the "Your device is unlocked" screen with no action happening. If I hold Volume Up to enter the e-recovery, I am only present with three options, with only two doing anything which are working: Restart and Shutdown (this is the only way I can shut down the device). There is no wipe data option. I know I am running a BLA-L29 model and pretty sure it is the European model. I installed TWRP but getting to that screen is difficult as each time I hold a button combination (Volume Up + power button or Volume Down + power button), nothing happens (I do know it is installed as I have reach the screen several times on my device). Any suggestion? I would like to install Lineage but I would be fine returning to stock OS. I apologize for the redundancy of this thread (potentially) but I couldn't find the answer anywhere, and nothing specific to my situation.
Click to expand...
Click to collapse
May i know still problem in your mobile....
truthteller609 said:
May i know still problem in your mobile....
Click to expand...
Click to collapse
I was able to fix it. Had to reinstall the original software, then try again. Thank you
afjohn483 said:
I was able to fix it. Had to reinstall the original software, then try again. Thank you
Click to expand...
Click to collapse
Does your fast boot is workung
truthteller609 said:
Does your fast boot is workung
Click to expand...
Click to collapse
Yes
afjohn483 said:
Yes
Click to expand...
Click to collapse
Your getting bootloop
truthteller609 said:
Your getting bootloop
Click to expand...
Click to collapse
Everything fix now
Hey everyone,
Today I woke up and found my phone in a black screen and no response at all, tried force restart and everything but nothing worked with me.
The situation is that the only thing that I can see is a flashing red light when I charge it, and every time I try to turn it on by holding the power button and connecting it to charge it does vibrate then it returns to the black screen and flashing red light.
However, I managed to open the fastboot/rescue mode but it's locked and I tried to do everything on fastboot but as long as the phone is locked I couldn't do anything (I need a code tho to unlock it but I prefer not to).
I would appreciate it if anyone can help me with it.
Thanks
Can you boot into erecovery?
donkeyman1234 said:
Can you boot into erecovery?
Click to expand...
Click to collapse
Unfortunately not, the only thing that I can boot is fastboot/rescue mode.
I tried to boot the recovery through my computer "fastboot reboot recovery", but it won't it just keeps booting the black screen with red flashing light.
Well, without erecovery and bootloader still locked, have you tried dload method or a quicker way just send back to service center?
donkeyman1234 said:
Well, without erecovery and bootloader still locked, have you tried dload method or a quicker way just send back to service center?
Click to expand...
Click to collapse
I'm not sure what is "dload method", I would appreciate if u can explain it to me.
About the service center, actually it is my last option.
Thanks
https://forum.xda-developers.com/showpost.php?p=80124126&postcount=2 you have to use force update, look it up in the forum, many topics about dload method.
Had the same problem on my Mate 20 Pro, sent it to reapair on warranty and they change the motherboard on the phone.
donkeyman1234 said:
https://forum.xda-developers.com/showpost.php?p=80124126&postcount=2 you have to use force update, look it up in the forum, many topics about dload method.
Click to expand...
Click to collapse
I tried the Force Upgrade but no response at all... just a black screen.
Any other solutions?
Mostar088 said:
Had the same problem on my Mate 20 Pro, sent it to reapair on warranty and they change the motherboard on the phone.
Click to expand...
Click to collapse
Well, they did what they had to do
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Atalephinio said:
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Click to expand...
Click to collapse
You can reflash the rom with realme flash tool。（https://androidmtk.com/realme-flash-tool) ----Sorry for making a mistake earlier
Have you tried it?
yiyinglaohu said:
You can reflash the rom with MIFLASH。（https://c.mi.com/oc/miuidownload/detail?guide=1 ）or (http://www.miui.com/shuaji-393.html)
Click to expand...
Click to collapse
but the problem is that it is connecting and disconnecting every few seconds
Atalephinio said:
but the problem is that it is connecting and disconnecting every few seconds
Click to expand...
Click to collapse
Try to get into fastboot mode first . Your situation seems to be that the ADB driver is not fully installed
you can find it on google
yiyinglaohu said:
Try to get into fastboot mode first . Your situation seems to be that the ADB driver is not fully installed
Click to expand...
Click to collapse
how??? it is not responding when I am pressing on the buttons. It is hard bricked.
no fastboot no recovery. nothing - just black screen.
Atalephinio said:
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Click to expand...
Click to collapse
try vol "down" +" power" button, if it'll go to recovery stable you can use adb commands
or
vol "up"+"down"+"power" (3 buttons in total) and when you see chinese letters just relesease them. if its succesful, you'll see bootloader menu
grown_man said:
try vol "down" +" power" button, if it'll go to recovery stable you can use adb commands
or
vol "up"+"down"+"power" (3 buttons in total) and when you see chinese letters just relesease them. if its succesful, you'll see bootloader menu
Click to expand...
Click to collapse
I wish it was my situation... I tried it nothing happens.
Atalephinio said:
I wish it was my situation... I tried it nothing happens.
Click to expand...
Click to collapse
then i suggest official repair services
Atalephinio: "but the problem is that it is connecting and disconnecting every few seconds""no fastboot no recovery. nothing - just black screen"
You probably only have EDL mode active. I think only MSM Download Tool will help you. However, but this is a paid service.
This is my opinion, but maybe someone more experienced should have a say.
Try to press three buttons (vol up- vol down- power) during 40 seconds aprox....
May only use 9008 mode.
I solved it. The only solution is to pay to someone who got msmtool.
This problem happens when you flash another rom through twrp on gt, it erases the recovery of the phone and then when the phone is trying to go to recovery it becomes bricked .
If you want to avoid it use the commands of adb and fastboot through the computer (not through the phone itself).
I paid 15$ to @hoangzk9 he solved the problem.
Big thanks.
Atalephinio said:
I solved it. The only solution is to pay to someone who got msmtool.
This problem happens when you flash another rom through twrp on gt, it erases the recovery of the phone and then when the phone is trying to go to recovery it becomes bricked .
If you want to avoid it use the commands of adb and fastboot through the computer (not through the phone itself).
I paid 15$ to @hoangzk9 he solved the problem.
Big thanks.
Click to expand...
Click to collapse
As I know that realme gt dont public the flash tool so we need contact to the services to get they help.
Same with you, I have some problem when I tried to flash twrp to realme phone. No luck and my phone became hard brick. But you can send an email to eu services of realme, they can help without any paid.
Good to know.