Bluetooth and default battery optimization - Android Q&A, Help & Troubleshooting

Mike, this is likely in the wrong place so please move and let me know. TNX!
Bluetooth probs (particularly on Pie?)
Have experienced lots of BT probs over the years, particularly on Pie
BTearbuds - no matter which one I try I seem to lose one side of the conversation after a bit.
fitbit and fake fitbit activity bracelets - seem to initially work , then can't sync.
Just discovered a setting (I think from a fitbit help note)
settings/apps and notifications/advanced/special app access/battery optimization
- tap top bar and choose ALL
I noticed that bluetooth is, by default, set for optimize. So, I reason, If I am on the phone and my phone goes to sleep, I lose part or all of BT.
WHY?
What am I missing here.
I feel the need to go in there and enable for, at the least, "bluetooth" and certainly fitbit" (or any fake-fitbit app.)
Will this cure my problems? (I will find out...)
What am I missing here.
Been playing with phones since forever.
Thought this was a Pie prob so went back to my G3 with Alberto's 8.1 and experienced the same thing.
Happen to be back on one of my Moto X4'x trying, yet again, to see if I can get a phone to work...
(this one is stock, just took -11 (Moto X4 One fi) )

Related

WM6 Essentials ROM Free discussion

Hi, this thread is here for posts that has no room in technical discussion related to this rom. From tech discussion, irrelevent posts will be deleted without excuse, without reason. So here's the correct place for them...
Well done
I just wanted to say well done for the new fast clean rom. I'm finally over 2.5!
Everything I need to work works and well and fast. Thankyou !
Now how do we get the touch interface on the Charmer as they seem to be getting working on the Prophet??? Maybe wrong place to ask, will wait. In the meantime, thankyou again.
the bt works fine with car set
"Now how do we get the touch interface on the Charmer as they seem to be getting working on the Prophet??? Maybe wrong place to ask, will wait. In the meantime, thankyou again."
it's available for wizards - search their forums: http://forum.xda-developers.com/showthread.php?t=313656
"the bt works fine with car set "
nice to hear...go on with testing
WIFI confirmed
WIFI SDIO function has been confirmed by beta tester, loskarlitos - with some limitations like control panel not working , WIFI connection has been confirmed as stable and able to survive standby mode
Thanks Loskarlitos!
Excellent, a new rom to try!!
I can't believe I have only just found this. I could have been playing with it this evening. Its a little late to start messing now!!!
Thanks for all the hard work Nocturne.
nocturne.op.15 said:
WIFI SDIO function has been confirmed by beta tester, loskarlitos - with some limitations like control panel not working , WIFI connection has been confirmed as stable and able to survive standby mode
Thanks Loskarlitos!
Click to expand...
Click to collapse
i think the wifi control panel only works with built in hardware. thats why its removed from the official charmer roms.
hope you are right. i wil think about removal of it for the next ver.
nocturne.op.15 said:
hope you are right. i wil think about removal of it for the next ver.
Click to expand...
Click to collapse
I dont know if that's such a good idea. Some people use SDIO wifi cards and find those wifi settings useful.
Cheers,
vlodeck
as reported from my beta man, loskarlitos, and as reported above, this wifi settings applet seems to be working only with built-in wifi modules, settings are inactive for sdio cards.
Wifi SDIO owners, please share your experineces - than i can build fully functional rom stripped down from useless parts
Hi,
first of all amazing rom. Really really fast. It syncs great under Vista. To flash from Vista you have to use the "Another Flash Method". I encountered no problems with the 12 apps running, alarm or landscape problem.
Only the Calender and Contact buttons are still hardcoded to Start and Back.
problem with alarm was solved - it was really caused by underclocking charmer down to 95mhz (I'm using BatteryStatus for dynamic overclocking. 95MHz is simply not enough power to bring alarm window up and system behaves strange)
problem with changing landscape/portrait disappeared and never came back - but will keep it in buglist until this is really confirmed
lagge number of running apps stil remains - if lot of apps running, softkeys are not working as they should...hope somebody could try this on another wm6 device?
Calendar and Contacts issue
Been testing this rom for a day or two - I get the problem where Calendar and contacts won't start (whether from soft keys or the Start menu) and I have to soft-reset to egt it working. I admit I have been using iContact as well so I will uninstall that for a few days and see if the problem goes away.
closing some apps does not help? it helps for me...
customization?
Hi, when i flash yours new rom and make HR system was start and customization from old wm5 was started. In rom 4.4 customization was not started after HR, is this was changed in this release?
sorry for my english....
This was reported and will be modyfied in next ver. Till then, just skip the customization after HR
Ring tone changes....
Hi, next thing is that my ring tone changes to default without my command. I've seen this before in previous roms but in 4.4 it was ok.
I installed this last night. Seems nice and fast.
I noticed that the phone pad SIP and MMS are missing. (Installed these manually)
Also, i'm afraid the Bluetooth A2DP appears to still be the older, poorer quality version.
Cheers
phonepad sip is missing because i don't like it - it is not necessary. everybody can install it easily manually. but it will not eat precious memmory for us who does not use it ,-)
MMS support is there - no problem with it, thing you report is a bit strange...
it's hard with A2DP. Some testers were reporting it's the best A2dp they have seen - you tell the opposite. The worst thing is that i cannot test it - i do not have a2dp device :-( is possible that transfer quality is also dependent on used HW?
regarding those ringtone changes - i was testing this today (about 10 calls, some restarts etc - no problem. aren't you using any 3rd party software for phone profiles or things like that? I saw this with pocket zen phone..if not, try please to search for some dependency of this behavior so i can repair it
Thanks Nocturne.
I'm really starting to think I've flashed the wrong ROM. I've got so many on my PC now.
Can you confirm what I should be seeing under Device Information?
Thanks

[Q] - Ca-Fi Android Car Stereo

Does anyone have the Ca-Fi Android car stereo? It seems it was recently released. I really want one, and will probably get one.
ca-fi.com/en/
Im debating on ordering one too.... though they list a 800mhz and a 1.2ghz version. Seems the 800mhz version is the only one available
Wish XDA would make a section for it and some custom **** was done with it!
total junk. save your money
I got one yesterday and installed it. Save your money. Its total junk. Was definatelu rushed to market.
No android market (yes you read that right)
Navigation requires data connection either through hsdpa gsm 3g or wifi (meaning you have to provide data for navigation to work at all)
Voice navigation doesnt work (it asks you to install additional files via the market, which again doesnt exist so it fails)
Every time i start the unit it goes to fm radio even when i dont want it to. Force closing the radio app does nothing.
The list goes on and on and on. NEVER AGAIN
shassouneh said:
I got one yesterday and installed it. Save your money. Its total junk. Was definatelu rushed to market.
No android market (yes you read that right)
Navigation requires data connection either through hsdpa gsm 3g or wifi (meaning you have to provide data for navigation to work at all)
Voice navigation doesnt work (it asks you to install additional files via the market, which again doesnt exist so it fails)
Every time i start the unit it goes to fm radio even when i dont want it to. Force closing the radio app does nothing.
The list goes on and on and on. NEVER AGAIN
Click to expand...
Click to collapse
Oh that's disappointing. I'm still considering buying one, just to see if I can root it, and fix some of the problems that you listed.
Xitdis said:
Oh that's disappointing. I'm still considering buying one, just to see if I can root it, and fix some of the problems that you listed.
Click to expand...
Click to collapse
I actually thkught about that too. Problem is you really cant connect it to a pc so any rooting work woukd have to be done via microsd card and run natively in 2.2. Not only that even if you root it theres no gurantee the android market would be installed as the "default" market. This means the voice navigation may never be solved.
Long story short, i am veey disappointed. :-(
that unfortunately, I wanted one for my birthday
shassouneh said:
I actually thkught about that too. Problem is you really cant connect it to a pc so any rooting work woukd have to be done via microsd card and run natively in 2.2. Not only that even if you root it theres no gurantee the android market would be installed as the "default" market. This means the voice navigation may never be solved.
Long story short, i am veey disappointed. :-(
Click to expand...
Click to collapse
Doesn't it have a USB port on it?
I made the same mistake of purchasing one. I have been unsuccessful in trying to root it. Z4 will just freeze the device requiring a power cycle. I attempted to connect via USB but did not have any luck using this method either. The problem is that the radio runs both USB ports in Host mode. This keeps it from showing up as a device when you connect it to a computer. I have tried both the front and rear ports with Windows and Linux.
I did manage to get the Android Market app installed. It took a good bit of work and involved copying the Google apps including first boot to an SDcard and sideloading them. The first boot app did break my home button, it currently does nothing and I can't figure out how to re associate it with the launcher.
Once I was able to connect my Google account, I was able to sideload the market apk. Of course, this required working wifi. The dumb device is configured for wifi using a wpa_supplicant file which specifies that 802.1x authentication is required. Seeing as I'm not using this on my wifi, I needed an app called wifi fixer to override this setting. I also needed to setup an unsecured wireless network because I couldn't get wifi-fixer to connect to a wep or wpa network. Once connected, the wireless was very spotty but worked long enough for what I needed.
After all this was completed, I was able to download an offline navigation app, copilot live, that would allow me to use the device as a nav while I wasn't sitting in the driveway connected to the wifi. I did try connecting to my rooted DroidX with CM7 using wifi tether but could not get the radio to complete the connection.
As shassouneh pointed out, it boots into FM Radio every time its powered on. This allows it to start playing music quickly, but is very annoying. I typically stream music from my phone over bluetooth which requires the volume to be much louder than when listening to the FM Radio. When you start the vehicle, the volume is remembered and will be deafening. The FM radio application is very buggy and it will take several attempts to save your radio presets with an acceptable name. It tries to use the digitally broadcast station information as the preset name, but often it just returns garbage. After trying some twenty times, I was able to get most of my presets to read the frequency and the FCC station name. (ex. 93.1 WPOC).
The touch screen is very disappointing. It's a low-quality restive type which requires that you touch below the point you're aiming for. This makes getting to buttons at the very bottom of the screen a challenge. I tried calibrating the screen, but was sent into and endless loop of touching the cross-hairs...
The "Phone" app has all the bluetooth configuration including pairing, contacts, music, etc. it is very rudimentary. The radio frequently fails to connect to my phone on its own and needs to be forced to connect. Sometimes the play button will start the phone playing music and other times it won't. I haven't found a rhyme or reason for it yet. It doesn't support AVRCP and as such you get three buttons when streaming music over bluetooth: Previous, Play/Pause, and Next. There's no indication of which song is playing nor is there any way to browse the music on the phone from the radio.
Overall, the device is absolutely terrible. Perhaps if I could root it, I could fix a number of its annoying characteristics and it wouldn't be so bad. I was most disappointed by the poor wifi and the FM radio at boot. There is such potential here to make an awesome device... Do not waste your money on this piece of garbage no matter how tempting it may be.
Bought one also !!!
I discovered that the product seems to be sold has with another brand :
http://www.ekoore.com/web/en/product/car-hi-fi-2/elija-2/overview-6.html
The point is that they are providing an update.zip containing files and probably could be used for rooting the device. Found the link http://www.ekoore.it/download/elija/update.zip in the italian forum.
From what I understood, this is a 2.3 device ...
Confirmed mine is 2.3.3
Tried several rooting tools (Z4, GingerBreak, Visonnary+, Universal Androot ...) none of these are working.
Wasn't able to dump the rom (no ADB, used terminal with RomDump V7.2) but found that there is a physical switch inside the box. I can have a message displayed "No signal received", just by starting the device while the switch is pressed. Didn't manage to konow if this is bootloader mode or not.
Found a Quick Start guide explaining how to build kernel and so on http://wendang.baidu.com/view/6545cb13a216147917112879.html
Chip TC8900 seems to be used widely for several chinese tablets. So rooting shouldn't be as difficult as it seems. My guess is that the only way to have it rooted is to modify the update.zip above....but I don't know how to do it !!
From what I understood, the radio, BT etc ... parts are not running Android and are something completely different. The only way to switch to an android environment is to go to navigate mode.
Guys,
I'm surprised, I've had this installed in my car for a couple months now and it works great and I do use it daily and thoroughly.
I have installed Android market (couple of minutes, easy to do), have my email, contacts, everything setup, I even get auto updates for installed apps
Bluetooth pairing with both my HD2's works flawlessly and synced all contacts from both phones
The dedicated iPod interface works great with my 160Gb iPod, I have a USB hub in the glovebox with a 2.5" HDD , WiFi dongle and 3g dongle all connected in.
Navigation doesn't require a data connection, I have a several different SatNav apps installed - some online and some offline, but I stick with Waze as I like it..., Waze unfortunately starts up in portrait but that's easily sorted with a press of the home key and Waze also puts up a single warning about battery being flat, but there's no battery, so what would you expect.....
can also listen to good quality internet radio on the move
If you buy a device like this, you've gotta expect a data connection to be required for initial setup of your apps and how you want them, I've run the device without internet, through my phone and through a 3g dongle.
It works properly and reliably with my original steering wheel controls and the way it sets this up is the best I've seen on a in car device and simplicity itself.
It also boots to the last source being played, in my case normally iPod, but if the iPod etc is missing, then it will default to the radio.
The touchscreen isn't the best in the world, but is very useable, if the alignment is out then recalibrate it by holding the back button until the calibration screen appears..
Only thing I really don't like is if you burn some mp3's to a cd/dvd, they play through the dvd interface, not through the android media players.
I genuinely like the unit, it's a nice toy to have in the car and has no more issues than any other android device I've used...
J
Should say that the FM quality is really awful ! Can't even get the RDS working ...
French translation is missing sereval items (or completly false). Got the wifi + market without too much trouble. The touchscreen is usable.
I definitely love to have it rooted
Xitdis said:
Does anyone have the Ca-Fi Android car stereo? It seems it was recently released. I really want one, and will probably get one.
ca-fi.com/en/
Click to expand...
Click to collapse
I've got that stuff from their dealer in Russia, I think juliabrothers.net
Cool device. I loved it sound quality, pure, very sharp image. Very quick response. Yes, the touch screen isn't as good as we used to have on smart phones. Still works o.k. Just look at others DVD player made on Windows CE6.0 platform. They ain't better in anyway.
---------- Post added at 04:37 PM ---------- Previous post was at 04:33 PM ----------
naboleo said:
Should say that the FM quality is really awful ! Can't even get the RDS working ...
French translation is missing sereval items (or completly false). Got the wifi + market without too much trouble. The touchscreen is usable.
I definitely love to have it rooted
Click to expand...
Click to collapse
Could you please give me a hint how you manage to install Market on that thing?
Still working on it. Which Android version do you have? I have 2.2
You see, Android Market which built for smart phones doesn't work very well for CAR stereo devices. That Market doesn't differentiate between "good" and harmful applications, which can shut down your system forever.
Remember most of software designed for smart phones doesn't work under CA-FI platforms. Supplier said so, I 'd be happy to be wrong.....
---------- Post added at 06:25 PM ---------- Previous post was at 05:39 PM ----------
naboleo said:
Confirmed mine is 2.3.3
Tried several rooting tools (Z4, GingerBreak, Visonnary+, Universal Androot ...) none of these are working.
Wasn't able to dump the rom (no ADB, used terminal with RomDump V7.2) but found that there is a physical switch inside the box. I can have a message displayed "No signal received", just by starting the device while the switch is pressed. Didn't manage to konow if this is bootloader mode or not.
Found a Quick Start guide explaining how to build kernel and so on
Chip TC8900 seems to be used widely for several chinese tablets. So rooting shouldn't be as difficult as it seems. My guess is that the only way to have it rooted is to modify the update.zip above....but I don't know how to do it !!
From what I understood, the radio, BT etc ... parts are not running Android and are something completely different. The only way to switch to an android environment is to go to navigate mode.
Click to expand...
Click to collapse
Is that possible to use that manual for building a kernel, which could be used instead of pre-installed software? Seems interesting. Any thoughts?
Market came from the 2.3.3 build already installed on device. You probably can try the apk within the update archive http://www.ekoore.it/download/elija/update.zip . As the italian website is quite slow i extracted it. From what i understood update seems to not working on all devices.
Regarding the manual, of course I was thinking it could help for anything like root, recovery image or enabling adb. But honestly i don't have enough knowledge to do myself.
Hi Everyone, just found this thread. I have this unit as well and have been building info on the MP3car site about it, overall i'm happy with the unit although i haven't been able to do everything i want to it.
The audio quality for me is good and i can tether data off of my phone to play internet radio and navigate through waze or otherwise. I'd definately like to see some development in this area myself as there are some welcome improvements to be made. i've sideloaded the market but was never able to update it. the player will default to the last built in media that was played when it shuts down and there seems to be several volume streams built in, i've heard people haven't been able to adjust these with volume apps.
here is the MP3car thread: http://www.mp3car.com/android-tablet/150109-innotrends-ca-fi-on-order-will-review.html
Upon request, here is the update zip from the italian forum. Rename from update.zip to elira-update.zip
elija-update.html
I recently purchased and installed the Ca-Fi "Universal" 620 to replace my JVC head unit that died after 5 years. Because there isn't much information out there about this product, not even from the manufacture, I thought I'd provide the good and bad from an audiophiles perspective(...and I only coin the term audiophile because I have a full on sound system in my car, not because I'm into the lossless debates and all that BS).
The Bad (or the ugly):
-Has an individual RCA jack for subwoofer output. (left/right(white/black, red) is pretty standard. Now I have to buy a sum'er to join the channels. What if I had two subs running left and right channels of bass...I'd be up a creek and would have to buy splitter then a line driver...blah come on.
-Although there is individual subwoofer level control there is no subwoofer (low) frequency control. So, my lows that run to my subwoofer are the lows that will run to my speakers and I can’t do this cause my front stage was meant for highs and mids.
-The Graphic EQ, although having 10+ frequency to set they provide automatic roll off of nearby frequencies so, it's hard to fine tune.If you’re going to give me that many frequencies then please let me control each one of them.
-The balance controls (and all other touch screen sliders)were OK but, they sorely need increase/decrease buttons (i.e. “+” and “-“). Trying to configure a good sound stage is hard with resistive touch screen sliders.
-The P.CNTL (I assume Power Control, again no documentation) is switched off and on when you change sources (or I think actually when no sound is “sensed”) whaa? So now, because my amps have delayed starts, each time I switch a source (or Pandora even buffers a new song) the relay power drops to my amps and I have to wait for my amps to power up again. Not to mention the pops because of the high current switching on and off..man. So now I have to find an off delay relay so my amps don't turn off when I change the source. Now I could very well be the idiot on this one and need to use the P.ANT (I assume power antenna) but, the reason I didn’t is because P.ANT is solid blue wire, whereas P.CNTRL is a blue with white strip which is more industry standard for relay control.
-The boot up source is always going to the Radio. I read some other folks already discuss that here and there but, come on, really, you can't just remember the last source I had.
-Bluetooth (or lack thereof) yes, it will play your music from your phone (in my case HTC Sensation) but, that's about it. If I want to change an artist or song or whatever I have to do it from my phone. I thought it would have this to make me a safer driver so I don't have to look/mess with my phone to get new songs, guess that's what I get for assuming?
-Auto screen Dimmer doesn't work or isn't that great cause I still have to manually dim the screen at night.
-Resistive touchscreen I gotta hammer the screen to push buttons. Each push takes my attention away from the road, no bueno!
-Wifi doesn't support WEP or WPA no biggie since I'm driving and I don't think hackers do drive by hackings (or do they?). But, still sucks cause when I use it at the airport I have to turn it back on. Just a nuisance but, wifi WILL tether (provided you buy the additional USB Wifi Adapter).
-Some Apps don't recognize my wifi connection and thus will not work. Case in point, Google Maps. wft! the whole reason I got the thing was to wifi tether with my phone and control goolge maps from ca-fi. Nope can't do it. booo.
-Double DIN – not really. I don’t know what standards they followed but, my original brackets from my original Double DIN HU (head unit) didn’t work. The unit sticks out so far my radio door won’t close and there’s a gap of about .25 inches on both sides. No install kits will work with this because it’s not truly a standard Double DIN.
The Good
-The bluetooth phone capabilities work good. Contact list is ok. Of course it sucks for me because of the whole P.CNTRL thing. Yes, when I switch to Phone it turns off and on my amps…grrr.
-Mini SD card slots and a miniUSB port in front, very nice/convenient.
-System isn’t as slow as one might think for such a “slow” processor. My HTC Sensation runs circles around this thing ;p.
-Nice interface for the radio.
-You can run Apps. Although a lot of them crash (i.e. Force Close) every now and then for no apparent reason.
-Pandora works (with wifi tether) very nicely.
-Push button (knob) for mute and knob volume control.
….that’s all I’ve got for now but, so far the goods don’t out weight the bads so, I’m not happy with regards to the amount of money I spent vs. what I’m getting vs. what actually works. I’m not upset because I went into this fully knowing I was going to be a guinea pig but, if you’re a music first, apps and other **** second, kind of person like me steer clear my friends.
Not that any manufacture ever cares or even reacts to forum post, I’m going to try and communicate this to the manufacture and hopefully see if a) they’re aware of these issues and b)if they plan to release fixes/patches to help their “new adopters” out. Don’t get me wrong this company has a great product and great idea but, they’re seriously mistaken if they think they can compete with the big boys (Android Apps or no Android Apps).
What do jou Guys/girls think about this product....... http://www.chinavasion.com/2-din-ca...chable-android-23-tablet-panel-wifi-gps-dvbt/
I find it very interesting

Strange BT behavior

Since changing roms, I had to repair the BT in my car with the phone.
My car supports the hands free profile and piping of media (play music on phone, hear it on car speakers).
After re-pairing the two, I had strange media play back. It would stutter every half second or so, as though the signal was getting interrupted.
Made one test phone call to see if that worked as it should, and it did, no disruption in the sound. Subsequently, tried the media playback again (no changes in any BT settings). This time it played back correctly.
Unpaired everything and repeated. Same results. It would appear something isn't getting set correctly in the BT pairing until a phone call is actually made. Similar behavior was noticed on the stock rom too (currently have charmeleon installed).
A few other people have found this same problem. It doesn't look like there is a permanent fix for it just yet. There are discussions about this on AndroidCentral as well as Sprint Community but since I'm a new member here, I can't post links right now.
According to the post on Sprint Community, HTC is aware and hopefully looking into it.
If you want the links, send me a PM and I'll send them to you.
^^Thanks for the update. You can still post links, but indirectly.
www google com /{rest of url} should work.
This issue isn't a deal breaker for me as I rarely use this function. Occasionally when traveling long distances. I have a 32GB usb flash drive that has most of my music on it which works quite well.
Ok, let's try this. Here are the two links I was talking about.
forums.androidcentral com/htc-evo-4g-lte/178321-strange-bluetooth-issue.html
community.sprint com/baw/message/430140?tstart=0
It's not a deal breaker for me, but only because the workaround is so easy, although temporary.
Hmm.. There seems to be a common thread (mostly) that most of the folks have an infiniti product (self included) who are experiencing this.
Although I didn't test, I wonder if the work around has to be invoked each time the car/phone is paired?
Thanks for the links!
I have to do the workaround each time I turn the car on. Just make a quick call to voicemail over Bluetooth, hang up and voila, error free audio. I never have to impair/pair the connection manually.
Sent from my Evo 4g LTE
Any updates to this?

Android 10 update broke calling

Got the update last night. Tried to check voicemail morning and was greeted with Alvin & The Chipmunks blabbing at me. It's like the speed of the call is x20 speed or something. It's completely unusable. Phone sluggish as hell, too.
Anyone know what's going on with the voice speed? I've never heard of anything like this.
I'm supposed to get a callback for a job interview I had yesterday. Pretty crappy timing. How is Google going to push an update that breaks calls like this? Absurd.
its nokia that pushed the update they did not make the rom right
Same here I told nokia about it and they told me to wait for a bug fix. I told them I wanted to downgrade since your firmware bug broke my phone.
Just wait for a bug fix? So use a Phone that cant make calls right?
So payed a guy to unlock my boot loader to try to flash a rom so i can just make the phone usable.
I spend about 6 hours try to get the rom to work. With little to no luck I was able to get into twrp a few times.
So ya Im in the same boat. I just got this phone back 3 weeks ago from a rma due to a bad chargeing port. Now Im forced to pay some one to unlock the boot loader and try to get a custom rom Just to be able to call
If I cant get the rom working Im going to have to go spend like $200 on a new phone today just sucks
fisterkev said:
Got the update last night. Tried to check voicemail morning and was greeted with Alvin & The Chipmunks blabbing at me. It's like the speed of the call is x20 speed or something. It's completely unusable. Phone sluggish as hell, too.
Anyone know what's going on with the voice speed? I've never heard of anything like this.
I'm supposed to get a callback for a job interview I had yesterday. Pretty crappy timing. How is Google going to push an update that breaks calls like this? Absurd.
Click to expand...
Click to collapse
Same thing happened to me with the sped up chipmunk-y sound. It happened during the dial and after someone picks up. Though it didn't seem to happen every time. Also, I didn't notice it on any incoming calls, just outgoing.
I tried a few things to fix it--rebooting, clearing some app caches, etc. Nothing seemed to work.
My next step was to try a factory reset, but then all of a sudden the issue disappeared. No new update was released/installed, so I just assumed the issue had been on my provider's end (T-Mobile), and they fixed whatever the problem was.
As for sluggishness of the phone after the update: I agree. It seems a little sluggish to me too. Not anything that is making the phone unusable. But it is noticeably more sluggish than when 9.0 was installed.
Have you guys modified the phone in any way like unlocking the bootloader or rooting?
gumbyx84 said:
Have you guys modified the phone in any way like unlocking the bootloader or rooting?
Click to expand...
Click to collapse
I haven't. Just using whatever over the air OS Nokia pushes to the phone.
yes I did pay to unlock the boot loader I used linage from the rom section
it has all the bugs of the stock rom. Cant call out or with out the loud noise bug and no voip apps work
I did get the Android 9 based rom to work. it has a few bugs but its usable.
I more or less gave up im looking at a iphone now.
I spend 20 hours or more trying to get this phone to work
first the usb port goes out and I cant charge.
2 weeks after having the phone back I got a magnetic cable so the usb port would not brake any more cable. That was like $20
After 2 weeks android 10 more or less bricks the phone (a phone that cant make calls)
Then I have to spend like $15 to pay the poor guy to unlock my boot-loader (he did a great job)
I spend a lot more time loading the linage android 10 rom for it to have the same bugs ( in no way is it the devs fault im sure he did not know).
... can unlock your bootloader for a small fee.
I would say all android 10 based rom will have those kind of problems. I can only confirm it on the android 10 linage one
When I flash twrp most of the time the twrp would just freeze if booting form the phone.
I had no problem loading it with fastboot works evey time. So I would only use it install the rom and just boot it when you need it. I would not suggesting flashing it to recovery as it only worked some of the time for me.
Hope all that info helps
QUOTE=gumbyx84;81261583]Have you guys modified the phone in any way like unlocking the bootloader or rooting?[/QUOTE]
---------- Post added at 06:48 PM ---------- Previous post was at 06:44 PM ----------
The calling problem goes in and out. Some times it works some times it dose not. Facebook message outgoing calls the mic will not work, Same with google voice.
if i make calls with out google voice it works 1/2 the time. all the people have the same problem
https://community.phones.nokia.com/discussion/54374/android-10-after-update-on-nokia-7-1
diggeryo said:
Same thing happened to me with the sped up chipmunk-y sound. It happened during the dial and after someone picks up. Though it didn't seem to happen every time. Also, I didn't notice it on any incoming calls, just outgoing.
I tried a few things to fix it--rebooting, clearing some app caches, etc. Nothing seemed to work.
My next step was to try a factory reset, but then all of a sudden the issue disappeared. No new update was released/installed, so I just assumed the issue had been on my provider's end (T-Mobile), and they fixed whatever the problem was.
As for sluggishness of the phone after the update: I agree. It seems a little sluggish to me too. Not anything that is making the phone unusable. But it is noticeably more sluggish than when 9.0 was installed.
Click to expand...
Click to collapse
How to fix the phone call problems
To everyone having calling issues (distortion / squealing, or other people can't hear them), try this: Turn off Voice over LTE. You go to Settings -> Wireless and Networks -> Mobile Networks -> VoLTE, and turn that setting off. This fixed the problem for all 3 Nokia 7.1 phones in our family, when nothing else seemed to work.
Turning off VoLTE and wifi calling works, but VoLTE is important in my area with TMobile. Without it, too many dropped and missed calls. I actually downgraded from an Xperia XZ1 just to get VoLTE, now this happens.
I have TA-1085 running Android 10 that was pushed OTA on 12/25, while I do not have calling issues (from native call app) initially, calling from all 3rd party app (e.g. Messenger or Wechat) are not working: I can hear other side, while the other side can not hear me.
In addition to disabling VoLTE, I also changed the 'preferred network type' (see posting from author 'fiumaxx' on nokia's user forum, search there using android-10-after-update-on-nokia-7-1 as search string). I changed it to LTE/CDMA which works well for me.
Normal call sound is back to normal but 3rd party calling still not working.
zhou68000 said:
I have TA-1085 running Android 10 that was pushed OTA on 12/25, while I do not have calling issues (from native call app) initially, calling from all 3rd party app (e.g. Messenger or Wechat) are not working: I can hear other side, while the other side can not hear me.
In addition to disabling VoLTE, I also changed the 'preferred network type' (see posting from author 'fiumaxx' on nokia's user forum, search there using android-10-after-update-on-nokia-7-1 as search string). I changed it to LTE/CDMA which works well for me.
Normal call sound is back to normal but 3rd party calling still not working.
Click to expand...
Click to collapse
This worked for me:
Go to Settings/Apps and Notifications and then tap on where it says See All xx Apps. Scroll down until you see the Google app and tap on that. On the next screen you see, tap on Permissions and then tap on Microphone. A small window will pop up, and you must change the setting from Allow to Deny.
After changing this setting, Google Assistant won't work (no Hey Google), but the fix is persistent after reboots. This makes me think the real problem may be with the Google app. We'll see.
ikijibiki said:
This worked for me:
Go to Settings/Apps and Notifications and then tap on where it says See All xx Apps. Scroll down until you see the Google app and tap on that. On the next screen you see, tap on Permissions and then tap on Microphone. A small window will pop up, and you must change the setting from Allow to Deny.
After changing this setting, Google Assistant won't work (no Hey Google), but the fix is persistent after reboots. This makes me think the real problem may be with the Google app. We'll see.
Click to expand...
Click to collapse
Thank you so much for sharing! Works like a charm
Unfortunately denying microphone for the Google app did not work for me. I also noticed no one can hear me when making videos calls (Hangouts, Duo, Facebook messenger).
I then decided to factory reset, but did not help. Both VoLTE and video calling still not working.
Anyone else with video calling mic issues?
zhou68000 said:
I have TA-1085 running Android 10 that was pushed OTA on 12/25, while I do not have calling issues (from native call app) initially, calling from all 3rd party app (e.g. Messenger or Wechat) are not working: I can hear other side, while the other side can not hear me.
Click to expand...
Click to collapse
I had the same symptom on normal phone call (other side could not hear me). In my case, it was the Google Assistant not releasing the microphone, and here what worked: open the system settings, go to Google (service&preferences)/Account services/Search, Assistant&Voice/Voice/Voice Match. Them make sure Access With Voice Match is ticked off.
Or try opening settings, searching at the top for "Voice" and open "Voice Match", and tick off "Access with Voice Match".
ikijibiki said:
This worked for me:
Go to Settings/Apps and Notifications and then tap on where it says See All xx Apps. Scroll down until you see the Google app and tap on that. On the next screen you see, tap on Permissions and then tap on Microphone. A small window will pop up, and you must change the setting from Allow to Deny.
After changing this setting, Google Assistant won't work (no Hey Google), but the fix is persistent after reboots. This makes me think the real problem may be with the Google app. We'll see.
Click to expand...
Click to collapse
Confirm this recipe works for my TA-1085. Thanks much.
I solved my random voice problems (others can't hear me on Duo video call, duplex voice on the other side etc.) with the voice match assistant workaround until hopefully gets fixed in a next update. Don't know for sure if the thing is only on Nokia's side or Google app's as well on Android 10, since disabling Hey Google solves all issues
Will have to try/catch on future google app updates as well to find out
Sly_North said:
I had the same symptom on normal phone call (other side could not hear me). In my case, it was the Google Assistant not releasing the microphone, and here what worked: open the system settings, go to Google (service&preferences)/Account services/Search, Assistant&Voice/Voice/Voice Match. Them make sure Access With Voice Match is ticked off.
Or try opening settings, searching at the top for "Voice" and open "Voice Match", and tick off "Access with Voice Match".
Click to expand...
Click to collapse
Under "Voice Match" I don't see any "Access With Voice Match" setting. What I do see is "Hey Google," which says "Access your Assistant any time you say "Hey Google" when your screen is on." Perhaps this is what your mean?
I tried this solution and it works, too. I think it also has the advantage of not completely shutting down Assistant's access to the microphone. Just waking up Assistant by voice. Much less of a price. Thanks!
Has anyone heard anything about a real fix for this issue? I've gotten two Android updates since the upgrade to Android 10, but this issue has not been fixed yet.
After extensive talks and inside info on Nokia's community forums, seems like a Maintenance update (MR) is on the way for May, which they say fixes -among others- both voice bugs. That is, the echo on calls plus sound distortion in some games (e..g Monument Valley 2 for me)
Cross your fingers everyone for a quick release and confirmation of the fixes!
Today was the day at last....! MR update showed up rolling out globally and echo during calls plus crackling sounds in games are finally gone
Better late than never NOKIA
dbal said:
Today was the day at last....! MR update showed up rolling out globally and echo during calls plus crackling sounds in games are finally gone
Better late than never NOKIA
Click to expand...
Click to collapse
Yes, they seem to have fixed the voice call problems with Whatapp, Wechat, Hangouts and etc since the Android 10 update.

Question BT issues... can a custom rom help?

Hello,
since I purchased my Redmi Note 10 (which came with MIUI Global 13.0.7, Android 12) I experienced some bluetooth issues which I hadn't with my previous phone (Redmi Note 7 with Android 10).
E.g.: I'm wearing a device (Dexcom G6) which sends every 5 minutes my blood glucose value to my phone via bluetooth; if I'm away for a while, the device doesn't reconnect automatically but asks for pairing again... and until I confirm I don't get new values. This could happen several times per day.
I've read a lot of people complaining about this behaviour (that seems related to Android 12); several workaround are suggested but nothing really solved the problem. I can provide more details if needed
Btw, the connection with Miband 6 is unstable too.
These issues are quite annoying and, as I said, I didn't experience them with my previous phone, so I'm wondering if switching to a custom rom can help me on this!
Hello,
Changing ROM can help, if the problem is software and related to MIUI for example.
As a last resort, I think it doesn't cost anything to try custom ROM, it is always possible to go back to the initial MIUI, if necessary.
It would be interesting to list the attempts you have already made to avoid making unnecessary suggestions.
If you haven't already done so, I'm thinking in particular of disabling battery optimization for the application used with Bluetooth.
spider1163 said:
It would be interesting to list the attempts you have already made to avoid making unnecessary suggestions.
If you haven't already done so, I'm thinking in particular of disabling battery optimization for the application used with Bluetooth.
Click to expand...
Click to collapse
Thanks for your reply!
Bascially, there are several apps well known in the diabetics community that can be used to read values from the device: xDrip+, Dexcom etc.
They all worked flawlessy on my old phone but with the Redmi Note 10:
- xDrip+ disconnects for 20 minutes after each reading (it should be 5)
- Dexcom asks for BT pairing now and then, sometimes even when I'm near my phone
Of course I disabled battery optimization.
These issues have been reported by users since Android 12 and not only on Redmi phones...
I tried to follow some suggestions:
- disable BT battery optimization: this was possible on Redmi Note 7 but I can't find such option on my Redmi Note 10;
- use apps like "Blue Car Tethering" that force BT tethering with paired devices; this improves the situation but doesn't solve it (with Dexcom I get fewer BT pairing requests, and with xDrip+ I get readings every 10 minutes);
- on "developer options": change "ACRCP Bluetooth" and "MAP Bluetooth" versions, but it didn't work even trying all possible combinations.
I'm experiencing problems with my Miband 6 too, that sometimes disconnects from its app; this didn't happen on my previos phone but it could be related to some bugs with the app itself.
My feeling is that, generally speaking, BT is more unstable.
Important: there are also users claiming not having issues with Android 12 at all, so maybe they are related to some manifacturer customizations; that's why I'm wondering if using a custom rom can help.
Sorry if I was too long but I tried to give more details.

Categories

Resources