starting from wanting custom rom corvus. I tried installing it without format data and bootloop result. then I tried to delete the data and then repeat install corvus. after I rebooted the result into fastboot mode. What am I supposed to do?
Related
I installed PA in slot 1, and tried to access bmm setting, but it said installation failed and after that i tried to reboot, and got stuck out of system with no way to boot into system.
I tried DROID_RAZR_Utility_Jellybean_XT912_WinMacLin and succesfully flashed stock rom, but cant wipe data as no backup of data off the device. also cant book in stock system as different rom installed. please help me, how do i wipe data withou losing sdcard data
1. can i install bmm from fastboot?
2. can wipe data(without wiping media) from any other way, eg BP, BP SBF Fash, etc?
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
D03035790 said:
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
Click to expand...
Click to collapse
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
rcstar6696 said:
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
Click to expand...
Click to collapse
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
D03035790 said:
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
Click to expand...
Click to collapse
Use this one https://mega.nz/#!rI4y2bJS!VksDLNy_a8cy8x-VBviYRkTP2SdSBm7Rs9G445vUXCU
This is twrp but it works with cmbased roms.
I have a LG-E410f with TWRP installed. I was going to install a new room, entered TWRP and wiped everything (cache, data, etc) and choose to reboot to recovery. But when I did that the phone got stuck on the LG logo! I still can acess Download mode (it means I can use LG Flash Tools to reinstall the factory room) but I will have to do every steps again (root, install TWRP, etc). There's any way to boot it to recovery?
hey guys just looking for some help. ive been modding and flashing phones from 2014, but its always gone really smoothly, so my diagnostic ability is lacking.
it started with flashing twrp. my bootloader is unlocked, usb debugging on, device is showing in adb and fastboot, and i can flash twrp without any issues. hoowever when i go to boot twrp, only the stock recovery boots. i tried to flash twrp using the XiaoMiTool v2, but the same thing happened. i eventually got around this by just booting twrp instead of trying to flash it. so i got in, took a full back-up and started installing a custom rom.
the first one i tried was ParanoidAndroid Quartz. i wiped cache, dalvik and storage then transferred it to my phone, tried to flash and got "zip verification failed". so i turn off zip verification and tried again. it flashed perfectly with zero errors. however, when i reboot the phone it would only boot to stock recovery and not twrp (expected) or the new rom. i tried that a few times, then tried LineageOS, and MSM Xtended 10. all of them had the same issue, the flashed without a hitch, then wouldnt boot.
i also tried flashing a new fw-vendor and it just straight up failed. Then i decided to cut my losses and restore my twrp backup, and that came back with the error, "extractTarFork() process ended with error: 255"
Software before i began these attempts was completely stock, so i dont know what is going wrong, but as of now, my phone is bricked, i cant install a new rom or restore my back-up.
any help is appreciated guys. thanks
You can figure out this problem with
1 Copy backup folder to computer
2- Format Data - Yes , Wipe Everything
3- Install ROM that you have installed before and boot
4- Go to TWRP, format data yes reboot recovery
5- Paste backup folder to internal storage and restore
So, I had Magisk and my phone was rooted, but when I decided to unroot and did a complete uninstall of Magisk: my phone restart but it keeps on restarting continuously, so I decided to go into recovery mode and followed tutorials on how to fix it. Firstly, I reset everything using the TWRP advanced wipe feature (I ticked everything). Then, I decided to flash LineageOS (the file attached) with TWRP and reboot, now the device is stuck in download mode. For some reason, I cannot boot into recovery mode and It's just going to go to be stuck forever in download mode, every time I restarted it or try to boot into recovery mode. What should I do?
anon57819 said:
So, I had Magisk and my phone was rooted, but when I decided to unroot and did a complete uninstall of Magisk: my phone restart but it keeps on restarting continuously, so I decided to go into recovery mode and followed tutorials on how to fix it. Firstly, I reset everything using the TWRP advanced wipe feature (I ticked everything). Then, I decided to flash LineageOS (the file attached) with TWRP and reboot, now the device is stuck in download mode. For some reason, I cannot boot into recovery mode and It's just going to go to be stuck forever in download mode, every time I restarted it or try to boot into recovery mode. What should I do?
Click to expand...
Click to collapse
Use Odin to flash latest stock firmware and start again.
To install lineage with twrp in wipe menu - advance wipe select only Data, System, Cache and maybe Vender if you have it after you have installed twrp properly first.
It's resolved now