Hello!
I have the Spigen Neo Hybrid case thats is pretty good!
It has a bumper of metal and the rest is of rubber.
I love it very much!
Is resistant and protective (protects my screen and the rear camera also) and doesn't bulk the phone at all!
At Amazon it's 13,99 euros
Hope this helps
Related
I made some short video reviews of my current cases. I have some more cases on the way that I will add to the reviews below.
TUDIA:
TUDIA TPU Case
Cruzerlite:
Cruzerlite TPU Case
Spigen Ultra Hybrid:
Spigen Ultra Hybrid
Nexus 6 Beggos pouch:
Nexus 6 Pouch
Supcase Hybrid Beetle:
Supcase Hybrid Beetke
Nilkin Bumper case (black)
This case isn't for everyone but I enjoy the nice look of a "bumper style case". The case isn't what I would normally call a bumper case but its still nice for $7. The buttons have an alright feel (they can get a little spongey) and the protection is what you would expect from a bumper. The bumper makes my phone larger than the Spigen Ultra Hybrid which is surprising considering that its just a bumper and the Spigen is a full case. The design could have been better by making it smaller. The charging port is a fair size and will fit the stock cable just fine with a very minimal bulge. The headphone cut out is also on the smaller side but it should fit most headphones. Overall its a decent case for the money, and if you want a bumper I'm sure you will enjoy it.
Nillkin Bumper (w/o phone):
Nillkin bumper (with phone):
Hey Pilz, great videos however I think it is not embedded properly on the forums because all I see are white boxes
try : [EXAMPLE:YOUTUBE]watch?v=KV6zJoxF8Ws[/YOUTUBE]
remove the "EXAMPLE:"
th3xeroeagle said:
Hey Pilz, great videos however I think it is not embedded properly on the forums because all I see are white boxes
try : [EXAMPLE:YOUTUBE]watch?v=KV6zJoxF8Ws[/YOUTUBE]
remove the "EXAMPLE:"
Click to expand...
Click to collapse
Thanks I'll fix the videos when I get home today. I'm waiting in a class to start currently so I can't change them until its over.
OP Updated Nillkin bumper added
I'm using REARTH RINGKE FUSION [Crystal Clear], great case and it has a cut out for magnetic charging cable/dock.
i use Elecom's ZEROSHOCK casing..
I use a silicone case buyed in a dime shop.
Incipio dual pro (white). Looks like I robbed a storm trooper for his celly
I'm using SONY SCR10
No case! The Z2 is a goddam sexy phone to put any case on it, well the only exception would be the original Sony SCR10...aluminum, glass, gorgeous camera lens, big LED....it is just perfect! well, except for the magnetic port
Hello guys !
Does the Spigen Ultra Hybrid Case also protect the camera ? I went to Spigen homepage but there is no info about the camera protection and its difficult to see it in the pictures
Thankful for the help
NangaParbat75 said:
Hello guys !
Does the Spigen Ultra Hybrid Case also protect the camera ? I went to Spigen homepage but there is no info about the camera protection and its difficult to see it in the pictures
Thankful for the help
Click to expand...
Click to collapse
It's thin case, and it protects camera when laying the phone on flat surface. If you put your phone on rocks or poke camera lens with knife, it wont help.
Thanks for your reply
I like the Spigen cases , do you know if the Spigen Slim Armor protects the camera better or should i buy the tough armor ?
Just ordered the slim armor !
i use the spigen slim armor and it is very good. phone is a bit heavier but I think it isn't a big disadvantage. my g3 fell down from 2 meters and it didn't crack. I also recommend buying an additional glass protection and the phone will be fully armored
Thanks for the tip, now to the store to buy also a screen protector to protect the amazing screen :good:
I had the spigen slim armor case on, dropped my phone and something shattered the top glass on the camera lens. Cost me $160 AUD to get repaired. so i don't think it provides great camera protection but it's not bad
Hello.
I bought a Spigen Neo Hybrid case and Anker TPU screen protector.
I installed the screen protector (perfectly, no bubbles) and I was happy and satisfied. That was till I put the case on. The case peeled the screen protector off at the edges leaving for a very ugly look.
So my question is, does anybody know of a glass/TPU screen protector that goes nicely with my case? Preferably one that covers as much of the screen as possible without hindering the case.
Best regards.
I have used Spigen Crystal and Spigen Curved Crystal screen protectors with the Neo Hybrid.
With the regular Crystal, I had no peeling at all (but I didn't like the protector because it scratched easily and had a slight rubbery feel..but no peeling at the sides).
With the Curved Crystal, I had one that got dust underneath that I left on for a week, and no peeling. Besides from the dust, the application was perfect, and had no rubbery feel and looked great. However, I took that one off, and I have tried a couple more Curved Crystal protectors that peeled at the edges a bit, because I did not centre it perfectly.
So if you can get it on perfectly, the Curved Crystal from Spigen (Orange box) might do the trick:
https://www.amazon.ca/Protector-Spigen®-Coverage-Lifetime-Warranty/dp/B01AIWCM8W
If you don't mind a slight rubber feel, this Spigen Crystal (blue package) will do the trick:
https://www.amazon.ca/Protector-Spi...=1465058744&sr=1-6&keywords=spigen+s7+crystal
chriskwarren said:
I have used Spigen Crystal and Spigen Curved Crystal screen protectors with the Neo Hybrid.
With the regular Crystal, I had no peeling at all (but I didn't like the protector because it scratched easily and had a slight rubbery feel..but no peeling at the sides).
With the Curved Crystal, I had one that got dust underneath that I left on for a week, and no peeling. Besides from the dust, the application was perfect, and had no rubbery feel and looked great. However, I took that one off, and I have tried a couple more Curved Crystal protectors that peeled at the edges a bit, because I did not centre it perfectly.
So if you can get it on perfectly, the Curved Crystal from Spigen (Orange box) might do the trick:
https://www.amazon.ca/Protector-Spigen®-Coverage-Lifetime-Warranty/dp/B01AIWCM8W
If you don't mind a slight rubber feel, this Spigen Crystal (blue package) will do the trick:
https://www.amazon.ca/Protector-Spi...=1465058744&sr=1-6&keywords=spigen+s7+crystal
Click to expand...
Click to collapse
Thank you very much. I ordered the Curved Crystal. I was using Anker which is a great screen protector on its own but doesn't go well with the Spigen Neo Hybrid. And I love this case so I'd rather get a screen protector that just fits.
Hi,
Comments on Amazon are not very good for the Spigen screen protection...
I've also a Neo Hybrid case and still looking for a good screen protection...
This one worked for me for both the Spigen Neo Hybrid and the Tudia Ultra Slim cases.
https://www.amazon.com/gp/product/B01DCR1ZR4/ref=od_aui_detailpages01?ie=UTF8&psc=1
I bought a Spigen Neo Hybrid Crystal which I like a lot except the bulkiness which ruins the overall look compared to my generic 0.7mm thick clear TPU case. Is there any clear tpu case with a hard edge section that's still thin?
For my flat version. Have a look.
MaxTeck Slim TPU Transparent Bumper Case for Samsung Galaxy S7
Luvvitt has a nice one on Amazon.