Hello everyone after an upgrade made with the wrong microusb now the box no longer hears the reset button and the remote control no longer works. I ask you if I can update the firmware directly on the processor via USB from the PC. Bypassing the boot that doesn't work?
Related
So I was lucky enough to score a free tablet from a promotion. It is a generic no-name brand device made from a company called "Ultralight Android Edge". It is a 7-inch tablet with ics and is locked with a password as I found out when I came home and tried to turn it on. I have tried to put in atleast 500 different pins to get it to unlock. Then I tried to enter into recovery mode but no button combinations would put me into recovery. The device wont turn on if a volume button is pressed with it and when it does turn on without any volume button press, I cannot force it to enter recovery later on. Please note that the device only has a volume rocker and a power button. After many failed attempts, I decided to use adb to boot into recovery but since it is locked, I cannot enable usb debugging and adb does not recognize any device. Finally I tried to boot the device while a usb cable was plugged in and although windows recognized it, a micro second later it would disappear.
Somebody please help me remove this password. I don't know why it was locked when I got it. Also, there is nothing in the box that specifies a password so not much to do there as well.
Thanks
Contact whoever was behind the promotion you won it at.
They are closed for Sunday and I don't know if they will be back for Monday...
hello! I have a tablet "energy Smailo 9.7" and can not access recovery mode. I tried all combinations of buttons "Volume + / - and Power Button" but nothing works. The back has a little button that must be pressed with a toothpick to reset. Can someone help me to get into download mode / recovery mode? thank you .
sorry for my englis i ussed google translate 1:laugh:
You can boot into recovery via adb, forum.xda-developers.com/showthread.php?t=1853159 . Though, please be careful and only use this as a last resort.
smailo hard reset
for a smailo web energy 7 how to do a hard reset?
please I need help with that because my tablet is stick at android logo and I can not use it.
How to rewrite firmware to smilo energy tab 7
Here's the way:
Install Pheonix suite 5(last version)
Download firmware from here :i can't put the link here, search on internet nuclear 6225 firmware download(XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210)
In pc suite press firmware select the file
Press upgrade
Close tablet
Press long volume
Connect to pc with micro usb cable
Press power shortly about several times, till the tablet is recognized to pc
After that the soft will be replaced(do not select full format)
When is finished the tablet will restart, will appear an error, but after that she will work
robert Hard&Soft Targu NT said:
Here's the way:
Install Pheonix suite 5(last version)
Download firmware from here :i can't put the link here, search on internet nuclear 6225 firmware download(XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210)
In pc suite press firmware select the file
Press upgrade
Close tablet
Press long volume
Connect to pc with micro usb cable
Ps. I used this FW: XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210
Press power shortly about several times, till the tablet is recognized to pc
After that the soft will be replaced(do not select full format)
When is finished the tablet will restart, will appear an error, but after that she will work
Click to expand...
Click to collapse
The firmware installs, but the touch very often is unresponsive and sometime when i press on something, it presses something else.
I mention thta the touch was working fine before firmware update. I needed to flash another firmware because of the "too many pattern attempts"
We could use some another software for this tablet?
Ps. I used XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210
I doesn't want to start..... Only shows battery icon when charging.
if you connect tab in pc usb,your pc recognize it?
Digital @ 961 Tablet Stuck in Boot Loop
vedran.cvetkovic said:
if you connect tab in pc usb,your pc recognize it?
Click to expand...
Click to collapse
I am experiencing the same problem...i believe they call it a boot loop where the start up screen never dissappears to bring you into the actual op. system. Is the only answer to download new firmware or is there a hard/factory reset that does the trick? FYI My computer doesnt recognize the device even when plugged into my mac via usb cable. I tried all I could find on key combos and unlocks for resetting the device but none of them worked. This is the second time this has happened. The first time was an easy factory reset fix pressing both the volume + button and the power key (or was it the volume -? I cant quite remember) for 15 seconds then wiping cache and data and restoring to factory defaults. Why is this same action not working this time when performed in the same way as I did when I fixed it the first time?
Please help, anyone, if you can.
Thank you.
It sounds like you might have tampered with the rom, or something you downloaded tampered with it. That's the only way I can think of as to why the factory reset would not be working. Other than that, potential hardware damage is possible. Before I help, I need to know what model of Digital2 tablet you're using. If you still need help with it, that is.
Hello everyone,
First of all, let me tell you that I am very good at android rom flashing and stuff and know these things. Now, here is my problem.
1. I have Aoson M19 tablet, which fell and the lcd screen stopped working.. The touch still work as I can see the output on HDMI by connecting it to an external screen. It lied in its box for sometime before I took it out again...
2. It had a pattern lock, which I unfortunately forgot, so after trying many times, it is stuck asking for my email/password immediately after boot (however the wifi is disabled at start so it never goes anywhere)
3. The tablet does not have a volume button, It has a button for Power, Escape, Home and Menu. I tried all combinations possible (as much as I could) to try and boot it so that it is recognized as an Rockchip 2918 device on my pc connected to it, but it does not work at all..
4. I tried using adb but it never shows it as a device when connected..
So I would like to ask the gurus as xda on how can I get my tablet back by either installing a new ROM (if I can get it to be recognized as rockchip device I can install drivers for it), or some other way to bypass the pattern lock somehow. Maybe some sdcard boot trick which I am unaware of till now..
(Note: this is indeed my device, not trying to hack into someone elses). Any help appreciated...
Maybe this will help: http://forum.gsmhosting.com/vbb/f90...pattern-problem-paswword-without-adb-1717216/
It was mentioned on the last page that Rockchip devices without Volume keys must connect the usb cable to PC and the port on tablet and press the reset button in the hole and the tab will be booted into the correct mode.
Tools: http://www.solidfiles.com/d/747bdce149/Rockchip_Batch_Tool_v1.7.rar
Firmware: http://www.szaoson.com/UploadFiles/Help/20130829102744_71726.rar ( 4.0 ICS v.1 )
My understanding is that the method for flashing Rockchip tablets is essentially the same across the board. So maybe try this guide for some general direction: http://www.arctablet.com/blog/featured/flashing-arnova-g2-rockchip-2918-rockchip-flashing-tool/
I don't know if this will work for your particular Rockchip tablet, but I also found this: http://forum.gsmhosting.com/vbb/f90...re-tool-how-use-guide-share-sonualok-1786042/
Please keep in mind that I do not have said tablet and am only going off of info I have found on the various forums that people reported success with. Also, be sure you do have the RK2918 version as there is a dual core RK3066 model with the same name floating around that I had noticed. The link provided is for a 2918 version. Good luck!
es0tericcha0s, you are a star, let me try and i will be back with the results.. I hope something will surely work..
Ok tried the reset button trick also, pressing it and holding before connecting the usb, and pressing after connecting usb, also tried the same with power button, but it always boots in android. And as usual the device keeps appearing as 'MID' in devie manager...
still stuck
Quick update
Ok quick update, I finally found the way to get it recognized differently (good or bad)
For Aoson M19, Hold the 'Home' key on tablet and then connect the usb cable to PC. However, it still refuses to install the drivers for the device..
See attached picture, still working on it...
Hello everyone!
I got a clone T95X box, on the info it says it's a Nexbox A95X 1GB/8GB. I installed TWRP then booted into it, started testing and erased all partitions (yeah dumb) on the advanced wipe screen.
I had made a backup of all the partitions to an external drive (I still have it) before I did this so I thought "ok no big deal" and went to grab a drink before I restored it. When I came back someone or one of the dogs had pulled or kicked the power cord and it was turned off!
Now when I power it on all I get is a red light, no image no nothing.
What I tried so far:
1- Magic SDcard method with cyx_NEXBOX-A95X_S905X_8189etv_8g1g_kodi_addons_161104_SD_USB firmware -> nothing
2- USB Burning Tool 2.0.8 -> device doesn't show up, no matter what I do or how I connect it to the USB male to male cable. Tried monitoring the device manager on windows 10 x64 but when I plug the cable on absolutely nothing happens.
3- http://freaktab.com/forum/tv-player-...962#post306962 tried this method using the uboot.bin image from the cyx firmware above. Nothing happens.
I have no clue of which pins to short on the nand (it's a Eudar EMS1ASCBT1FC008 module) so if anyone knows the pins for this one, PLEASE share!
I've run out of things to try, can you guys help me out reviving this box?
Thanks a LOT for the help!!!
With the USB burning tool did you try to press "Start" before connecting your box on your PC?
Do you have a reset button inside the a/v port?
Yep, tried the "press start before then connect the box" method.
It does have the reset button, I tried doing the above both with reset pressed and not pressed, in both USB ports... still nothing...
Have you found a solution? Same situation
Sent from my Nexus 6 using Tapatalk