I have this weird issue with my LG g8X thinq. The gyroscope and accelometer sensors have stopped responding . It gets fixed temporarily once i facorty reset the phone but reappears when i restart the phone. I have done multiple factory resets and also flashed new firmware through LG bridge software. This is weird problem which i'm unable to understand it can't be software because i reinstalled firmware twice and also not hardware because it works unless i restart the phone. Please help anyone.
ff007 said:
I have this weird issue with my LG g8X thinq. The gyroscope and accelometer sensors have stopped responding . It gets fixed temporarily once i facorty reset the phone but reappears when i restart the phone. I have done multiple factory resets and also flashed new firmware through LG bridge software. This is weird problem which i'm unable to understand it can't be software because i reinstalled firmware twice and also not hardware because it works unless i restart the phone. Please help anyone.
Click to expand...
Click to collapse
i m sure u must have done this but if now... try hard reset with volume down and power button. hopefully it will solve the issue else get the piece replaced asap.
Related
Hi to all,
I have a strange problem with my p500.
Sometimes when the phone is in standby mode, the screen freezes and the touch screen does not work. after a few seconds (after pressing any key) the phone reboots itself and everything returns to normal
Does anyone have a similar problem?
What can i do for fix it?
Thanks
You may be facing the random sd card unmount issue (which sometimes results in rebooting of the phone).
LG has released a new firmware which addresses this issue (it worked for me ). Use the LG suite to update the firmware...
If you are the adventurous type then refer here http://forum.xda-developers.com/showthread.php?t=876447
Thanks for the answer,
I tried to update the firmware, but LG suite say that is already updated (v10a) .
My carrier is vodafone. It may be that different operators will have different versions of firmware? (I'm newbie here)
Hi,
I flashed my x10a with latest flashtool with 2.3.3 firmware. The flash was successful, but after the flash it's screen touch is no more working. I thought that there might be problem with the firmware that I used, so I again checked with many firmwares, but none of them solved my problem.
Then I tried to repair my phone with Pc Companion, it says that no software is available for my phone. Also I tried with Sony Update Service, this also said no software for my phone.
I am tired now. I tried all the methods that I found on internet. Isn't there any solution for me now? I know that It's not a hardware problem because before flashing its screen was working without any problem. I know you guys here are expert in android problems. So hope you will help me in this problem? I am from Nepal. There isn't sony service in my country. What is the solution for me? I need your help....:crying:
could you tell us exactly what you flashed with flashtool ?
and what i understand is that your phone DOES work it fully loads up but not responding to your touchscreen ?
and any other info on what you might have flashed ?
it could just be freezing (so it seems like its not responding)
Bjornlindekens said:
could you tell us exactly what you flashed with flashtool ?
and what i understand is that your phone DOES work it fully loads up but not responding to your touchscreen ?
and any other info on what you might have flashed ?
it could just be freezing (so it seems like its not responding)
Click to expand...
Click to collapse
Bro thanks for your reply, I flashed X10a_2.1update1_r2.1.A.0.435_Generic.ftf, X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200.ftf, and few more firmwares like this. I used flashtool-0.8.0.0-windows_2.exe to flash the phone. Ya you are right my phone DOES work it fully loads up but not responding to my touchscreen
Keys are working well, volume keys, back keys all are working. After flashing finished option comes to choose the language and I can't go ahead than that because screen touch will not work.
me.amar said:
Keys are working well, volume keys, back keys all are working. After flashing finished option comes to choose the language and I can't go ahead than that because screen touch will not work.
Click to expand...
Click to collapse
did your touchscreen worked on 2.1 firmware
as im googling for this problem EVRYTHING leads to software problems.
for example this post
"''The touchscreen on my phone stopped working. Everything else is working (buttons), except the touchscreen. It shows everything but I can't do nothing with my finger.. I've had this problem before, but then it could be fixed by simply taking out the battery and rebooting that way. This time that didn't work. First thing that I tried was factory resetting the phone, clearing all caches, etc. Touchscreen still not working after booting. Then I flashed SonyStyle V1.1 touchscreen still not working. Then I 'repaired' it with SEUS, touchscreen was working fine.""
so the best thing you can do right now is use SEUS to get back to original firmware.
http://sony-ericsson-update-service.en.uptodown.com/
and a guide to help
http://www.esato.com/board/viewtopic.php?topic=171599
if it works then you are absolutly sure its not a hardware problem.
techdevilisnowmonster said:
did your touchscreen worked on 2.1 firmware
Click to expand...
Click to collapse
Before flashing it was working.But after flashing it didn't worked on any firmware
Bjornlindekens said:
as im googling for this problem EVRYTHING leads to software problems.
for example this post
"''The touchscreen on my phone stopped working. Everything else is working (buttons), except the touchscreen. It shows everything but I can't do nothing with my finger.. I've had this problem before, but then it could be fixed by simply taking out the battery and rebooting that way. This time that didn't work. First thing that I tried was factory resetting the phone, clearing all caches, etc. Touchscreen still not working after booting. Then I flashed SonyStyle V1.1 touchscreen still not working. Then I 'repaired' it with SEUS, touchscreen was working fine.""
so the best thing you can do right now is use SEUS to get back to original firmware.
http://sony-ericsson-update-service.en.uptodown.com/
and a guide to help
http://www.esato.com/board/viewtopic.php?topic=171599
if it works then you are absolutly sure its not a hardware problem.
Click to expand...
Click to collapse
Does this works for android phones?
yes the tutorial is just wrong i noticed .
you could just use it as a guideline tough my apolegies
Hello all,
My Note 3 touchscreen is freezing. When I restart the phone it works temporarily then it freezes again. ... I can use the S-Pen on the screen and that works fine.
I can even unlock my phone using my fingers on the touchscreen and that works, so I'm assuming it's not a hardware/touchscreen issue.
Here is what I have tried to resolve issues but it still doesn't work:
1.Soft Reset
2.Hard Reset (everything erased)
3 . Clear cache from boot screen.
Any advice on getting this to work would be greatly appreciated.
JayBeast908 said:
Hello all,
My Note 3 touchscreen is freezing. When I restart the phone it works temporarily then it freezes again. ... I can use the S-Pen on the screen and that works fine.
I can even unlock my phone using my fingers on the touchscreen and that works, so I'm assuming it's not a hardware/touchscreen issue.
Here is what I have tried to resolve issues but it still doesn't work:
1.Soft Reset
2.Hard Reset (everything erased)
3 . Clear cache from boot screen.
Any advice on getting this to work would be greatly appreciated.
Click to expand...
Click to collapse
Do you have an SD card installed? Try removing it and see if that helps. I had a problem similar to this once on an HTC phone. Problem was the SD card.
I've had the issue since I updated to MJ4 firmware. I've also had issues with the voice/data connection being lost. So it could be the firmware you are on
same here
JayBeast908 said:
Hello all,
My Note 3 touchscreen is freezing. When I restart the phonhave works temporarily then it freezes again. ... I can use the S-Pen on the screen and that works fine.
I can even unlock my phone using my fingers on the touchscreen and that works, so I'm assuming it's not a hardware/touchscreen issue.
Here is what I have tried to resolve issues but it still doesn't work:
1.Soft Reset
2.Hard Reset (everything erased)
3 . Clear cache from boot screen.
Any advice on getting this to work would be greatly appreciated.
Click to expand...
Click to collapse
i also have this issue. Im on Mi3 and was hoping mi5 or mj4 would fix it, but i guess not. I have a 64gb card in but i don't think tats the problem because i notice it happens when im low on ram, a message is coming in, or a app starts updating.
Hi, friends I have the V10 AT&T (H900) since yesterday the fingerprint reader stopped working and I get the following message:
"There is a problem on the fingerprint sensor. If this message occurs repeatedly, restart your phone"
I tried restarting but nothing.
I appreciate if anyone knows of any solution.
Have you found a fix? I just encountered this problem last night. I am also receiving the same error but I have not attempted a FDR yet.
When I enter the fingerprint settings menu I am told its broken and to restart the phone, but nothing changes.
xdstx said:
Have you found a fix? I just encountered this problem last night. I am also receiving the same error but I have not attempted a FDR yet.
When I enter the fingerprint settings menu I am told its broken and to restart the phone, but nothing changes.
Click to expand...
Click to collapse
I solved the problem, I done a restored the factory.
ronallica said:
I solved the problem, I done a restored the factory.
Click to expand...
Click to collapse
I also met the same problem.
whatever I done (restart, restore or refresh kdz of either 5.1.1 or 6.0), nothing changed.
my model is LG V10 H961N
could sb. help?
I have the same problem
I have the same problem
I have a auto restart problem, My device restart again and again automatically. I made a hard reset of my phone, but nothing solved. So I took it to the nearest local service center, they told me that I have power ic issue, and they changed it, and the restart issue solved. But now I am facing with a big problem, whenever I turned on blutooth or use the location/GPS my device freezed, and nothing worked until I forced reboot it by pressing the power button. And when my phone powered on it's hanged and showed System UI not responding. When I turned off blutooth and gps all things normal again. I made hard reset, flash my phone with official rom, but nothing solved. Same problem occurred again and again. I don't know is it software problem or hardware ?? Please help me.. I have all the latest update. Poco F1 Android 10 miui 12