hi, i flashed the wrong twrp on my a20e and now it can't get into fastboot or recovery either, it just sits still on the teamwin logo every time that i power it, it also doesn't get recognized on my pc, i suppose it is hard bricked but is there a way?
if not, well i tried it.
(IMPORTANT THESE STEPS INSTALL THAT SAMSUNG SYSTEM AND THAT RECOVERY OF SAMSUNG)
(IMPORTANT I am not responsible if it doesn't work for you)
Download and install the firmware
Step 1. Install "Frija" (https://github.com/SlackingVeteran/frija/releases)
Step 2. Open Frija. (Model: SM-A202F | CSC (List of all CSC https://www.droidviews.com/how-to-change-csc-in-samsung-galaxy-phones/))
Click Check Update, and then click Download.
Wait for the file to finish and unzip the file
Step 3. Download your USB driver and install the USB driver (https://gsmusbdriver.com/samsung-sm-a202f).
Step 4. Shut down your phone while holding the volume up and down and plug in the charger while holding it down
(It is important that the cable is connected to your PC.)
Step 5. Download and launch Odin (https://www.androidweblog.com/download-odin-flash-tool-windows/).
Step 6.
Now select the firmware that you downloaded in step 2
BL + AP + CP + CSC (CSC = CSC not HOME_CSC) (if it doesn't work, give it a try with HOME_CSC)
Step 7. Click on flash
Related
Can someone help me uninstall cyanogenmod procedures and restore my ATT note SGH- I717
The phone is acting up big time:
Shutting off on it's own and sometimes reboot by itself, also it flickers
Thank you
wilywizzzz said:
Can someone help me uninstall cyanogenmod procedures and restore my ATT note SGH- I717
The phone is acting up big time:
Shutting off on it's own and sometimes reboot by itself, also it flickers
Thank you
Click to expand...
Click to collapse
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
440bro said:
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
Click to expand...
Click to collapse
No GO
It aid This device's version cannot be updated
wilywizzzz said:
No GO
It aid This device's version cannot be updated
Click to expand...
Click to collapse
That's funny because it works for me! Are you sure you put in SGH-I717 in ALL CAPS?
Here's another method.
Download this file http://www.mediafire.com/download/g7gn29h7nu63id5/I717UCMD3_I717ATTMD3_ATT.zip
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
440bro said:
That's funny because it works for me! Are you sure you put in SGH-I717 in ALL CAPS?
Here's another method.
Download this file http://www.mediafire.com/download/g7gn29h7nu63id5/I717UCMD3_I717ATTMD3_ATT.zip
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
thank you it worked with your instructions
But not the first and to clear things up I did put in SGH-I717 in ALL CAPS
Thank you
ok I have do like you have posted with oden and i get to where oden says paassed....now i keep getting Android is upgrading...optimizing apps loop...now what
crazydads said:
ok I have do like you have posted with oden and i get to where oden says paassed....now i keep getting Android is upgrading...optimizing apps loop...now what
Click to expand...
Click to collapse
Sorry you're having trouble. I've never came across someone with a loop at optimization before. Maybe you can try to re download the file and repeat the process again. You might have a corrupt download.
DO THIS AT YOUR OWN RISK!!!!!
I AM NOT RESPONSIBLE FOR ANY ERROR OCCURS DURING THIS!!!!
PLEASE FOLLOW THE GUIDE STEP BY STEP TO DON'T FACE ANY DAMAGES/ERRORS.
First of all, You must confirm that your device model is J200G.
Otherwise it may damage your device!!!
I am not responsible for that.
That is, this guide is for J200G only.
Next, Check your firware model.
The model of your firmware must be : J200GDDU1APB1/J200G1APB2
Because the latest firmwares does not have any propper guides to root.
If it is yes ,then follow my commands otherwise you must downgrade your firmare by downloading firmware : J200GDDU1APB1 and flshing with odin tool(Downgrading the firmware doesn't change any type of settings in device).
Step 1 : Download the latest version of TWRP recovery .tar file for Galaxy J2 from the link.
Step 2 : You must unlock your bootloader.To do this , go to "Settings/About device" and tap "build number" 7 to 8 times . (It says "you are now a developer") and go back .And then, you see an extra option named as "Deveoper options" in settings, click on it and turn on "OEM Unlock" . This will unlock your bootloader (Unlocking bootloader will void your warrenty).
Step 3 : Switch off your mobile and boot into odin mode. To do this, switch off your device and press and hold the volume down+power+home buttons at same time. The device then displays the odin mode (Note that the FRP Lock is off otherwise it will lock custom binary).
Step 4 : Download and install the "samsung drivers" from link, and download and install the latest version of "odin" from the link on your computer and open it. And then select PDA/AP and locate the downloaded twrp_3.0.7_j2lte.tar file and select it. Now, connect the device with computer using data cable.
Step 5 : After connecting the device, note that the odin shows the "added" message. Then select "start" button and sit back and relax. It will show you the "pass" message and your device will restart automatically.
Step 6 : After this, download "superSU experimental.zip" from the link. And move it to root of your sdcard.
Step 7 : To see your new custom recovery , boot into recovery mode by pressing and holding the volume up+power+home buttons and then you see the TWRP logo and it will turn you to the home page of the recovery. Select the "install" option and locate the "supersu v2.60 experimental.zip" file and select it and flash it by swiping right from the left and the recovery shows the message "successfull". Then select "reboot" and then select "system" to reboot the device. Wait for the device to reboot and switch off and again it reboots automatically. Then, you see the "superSU" app installed on your device. Downoad "Root Checker" app from playstore for propper root verification. (During the boot, you see "kernel is not seandroid enforsing" message; don't worry, it doesn't affects on device.) Now, you have successfully installed TWRP Recovery and Rooted your Galaxy J200G.
KEEP SMILING!!!!
Link for Firmware(for those who's firmware is latest ones for downgrading): Goto boycracked.com/2016/03/31/officialsamsung-galaxy-j2-sm-j200g-stock-rom/ and download.
NOTE : YOU MUST SELECT FIRWARE : J200GDDU1APB1.
Link for Odin : Goto drive.google.com/file/d/0B-cLs7AIeb37ZWxSMl9EaGQ0Ukk/view and download.
Link for TWRP Recovery: Goto dl.twrp.me/j2lte/twrp-3.0.2-0-j2lte.img.tar.html and download.
Link for SuperSU : Goto download.chainfire.eu/745/SuperSU/BETA-SuperSU-v2.60-20151205163135.zip and download.
Link for Samsung driver for J200G : Goto www56.zippyshare.com/v/plQkPh9p/file.html and download.
device j2 does not show twrp recovery , then what i do
Hi there does enabling oem unlock in the developer option unlock bootloader...is there qny step after that...like going to download mode and long pressing volume button etc.....like other samsung phones...please tell....
Hello everyone.
Small Intro:
So, I bought Note 10 [Exynos] N970F. I wanted to use custom rom on it. I tried both Dr. Ketan's ROM and 420 Rom. Both of these roms were surely amazing and Dr. Ketan's rooting guide really helped in rooting and all things. Such a kind person to help for new comer.
As there are only these two roms at the moment and AOSP roms are either not available or very old with incomplete guide to flash. So after trying many different ways for flashing Generic System image (GSI) for my device. After series of failures, bootloops as I surely found some method to actually install GSI on N970F
Tested GSI
Havoc 3.8
Descendants
CrDroid v222 200816
Type of GSI to Use for our device:
ARM64-AB (As known as ARM64-bvN)
What's working:
Sim/IRC
Calls
Data/4g
Bluetooth
Wifi
Camera
Storage
Sensors
NFC/Location/Hotspot
Bugs:
MTP/USB connection not working
FingerPrint not working with Descendants Rom
(Can't confirm any further bugs. If you found please report so I can update thread)
Don't do anything without reading 4th Post (Disclaimer)
Your phone's internal storage will be wiped, deleting all of your data so make a backup
Prep:
1: Download firmware for your phone (Extract firmware and copy AP file to phone)
Either Use Frija or This website (Make account here, connect to GDrive and you can download from google server or IDM. Fast, Resume)
2: Download TWRP for your phone (It is better to have TWRP based on same base as is your phone's firmware download)
See here for TWRP (Usually has updated twrp) or see telegram of developer
(Extract twrp zip to have recovery.img. If it has different name, save it as "recovery.img", We will call it twrp-recovery.
3: Download Magisk Manager, install on phone
4: Patch AP file you copied to phone with Magisk Manager (Run magisk manager, --Install --> Select & Patch file --> Select AP)
A new file "Magisk-Patched.tar" will be saved in download folder. Copy it to PC. We will call it Patched-AP.
5: Open Patched-AP with 7-Zip. You should see files in it. (There should be a recovery.img in it) Now drag & drop twrp-recovery to 7-Zip window open Patched-AP. Wait for process, as it will replace stock recovery with twrp recovery. We now have an AP file with magisk & TWRP pre-patched.
Now we will use this updated Patched-AP
6: Download Latest Multi-disable from here
7: Download your desired GSI. Havoc GSI, CrDroid GSI, Descendants,Others
(Download ARM64-AB or ARM64-bVN) If you want Google apps it is better to download GSI with built-in GAPSS.
Steps to Follow:
(Enable USB Debugging on your phone, Turn on OEM Unlock option in developers option)
1: First Unlock Bootloader of your device (Boot to download mode-- Power off, Volume up + volume down and connect to pc)
2: Follow on-screen instructions to unlock bootloader (While in download mode -- long press volume up for unlock area, volume up to unlock)
Info: Now phone will do wipe and you should be back into system. Now due to some Samsung restriction, you must enable USB debugging again & see OEM unlock check if greyed out (untouchable). (You must do it as system gives download mode a signal to prevent issue with custom files flashing)
3: Boot to download mode, Press volume up. Connect to PC.
4: Run Odin, Select files, AP as Patched-UP we created, CSC as Home-CSC, CP and bootloader that your extracted.
(Uncheck auto-reboot in odin)
5: Start Flashing, wait for it to pass. Now we will boot to recovery from here
6: To boot into recovery, first we should exit download mode then boot to recovery during that process.
First Hold volume down + Power --> wait for screen to go black--> as soon as screen goes black--> leave all buttons --> now press Volume UP + Power --> Keep pressing until you boot into TWRP recovery.
7: Now Swipe to allow modifications --> Wipe --> Format Data --> type "yes" --> swipe. Wait for Wipe.
8: Now Click reboot --> Reboot to Recovery. Wait for Phone to boot back into TWRP recovery.
9: Again Swipe to allow modification. Connect to PC & Copy the Multi-Disable to phone.
10: Install Multi-Disabler --> Install --> Select Multi-Disable --> Swipe to flash. Wait for it. Reboot again to recovery.
11: Copy your downloaded GSI img to Phone. Select Wipe and do a factory reset.
12: Install GSI --> Install --> Select IMG --> Click on GSI image --> Select System partition to flash. It takes few seconds.
13: Now Reboot to System.
Phone Should be booted into new GSI installed
Credits:
IanMacD for Multidisable, TWRP
Dr.Ketan for excellent guides & such helpfulness
TopJohnWu for Magisk, patched AP
Respective GSI teams for their hard work
Reservation
2nd Reservation
Disclaimer:
Before proceeding, remember I’m not responsible for anything bad happened to your device by following this or any of my guide. I’m just trying to help. So always do it on your own risk…
Don’t blame me or Any other developer.
All tools here are developed by different personalities. I’m just providing a guide on using these tool. Always say thanks to me and them. And If possible, donate them. They really deserve it.
Thank you. Can i install on note 10 5G korea (N971N) with this method?
can i use this method with N971N ?
One UI 3.0 beta has been released for Galaxy A51 5G.
If you are part of the supported regions, you can grab the update link and share it here (for each update).
These are the steps I borrowed from @AhmedMomen 's S10 thread.
How to capture the update.zip file to share with other people:
1. Download HTTP canary app from Play Store.
2. Open HTTP Canary app.
3. Start the update by pressing "Download". Don't pause it!
4. Go back to Canary app and start it. It will grab the link for you.
5. Please share the link and your model number here!
As for how to sideload the update.zip file, I have explained it step-by-step here:
ADB Method:
1. Download and install adb.
2. Connect your phone to your PC.
3. Download the update file where you have installed adb Platform Tools.
4. Rename the file (including the extension) to "update.zip". Click "Yes" on the prompt.
5. Open your terminal of choice.
6. Type "adb reboot recovery" and press ENTER on your keyboard. Wait for your phone to reboot to recovery mode.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via ADB".
8. Back to the terminal on your PC type "adb sideload update.zip". (NOTE: If it says that device is not connected, just remove and put the USB cable back until it works).
9. The update is being installed. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
SD Card Method:
1. Search for an update file. You can usually find one in XDA Forums.
2. Check if you have the right build and open the right link.
3. Download the update file (.bin extension).
4. Move the update file to your SD Card. (NOTE: If you are getting errors, back up the stuff of your SD Card and format it from your Galaxy phone.)
5. Rename the .bin file (including the extension) to "update.zip". Click "Change" on the prompt.
6. Reboot to Recovery Mode, by connecting your phone to another device (such as your earphones) and holding the Volume Up + Power (+ Bixby) buttons.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via SD Card".
8. Navigate to and select "update.zip".
9. The update will start installing. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
You may also roll back to One UI 2.5 or update to stable One UI 3.0, when it's released with this method:
1. Download and extract both Frija and Odin.
2. Launch Frija.
3. Check the "Auto" button. Write your device's Model Number and CSC
(Your model number is at Settings, then About phone).
4. Click on "Check Update".
5. Click on "Download" and choose a folder to save the firmware.
6. After the download is complete, extract the firmware .zip.
7. Launch Odin.
8. Click the "BL" button and select the file that starts with "BL_...".
9. Click the "AP" button and select the file that starts with "AP_...".
10. Click the "CP" button and select the file that starts with "CP_...".
11. Click the "CSC" button and select the file that starts with "HOME_CSC_..." (Selecting CSC_... will wipe your data!).
12. Turn off your phone.
13. Boot into Download Mode by holding both Volume Up + Volume Down buttons and then connecting it to your PC.
14. After booting into Download Mode, press the Volume Up button to continue.
15. Back to Odin, click "Start".
16. The flashing process will be over when "PASS" is shown in Odin and your phone reboots. You may close Odin and disconnect the phone from your PC then.
17. Congrats! You have successfully flashed the latest update to your device.
18. After your phone is on, turn it off again.
19. Boot into Recovery Mode by connecting to your PC and holding Volume Up + Power Button (+ Bixby Button).
20. Navigating with the Volume Buttons and selecting with the Power Button, go to "Wipe cache partition".
21. Select "Yes".
22. Select "Reboot system now".
Links:
Odin 3 by Samsung:
Index of /samsung-tools/
Frija by invmini:
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
CSCs Cheat Sheet:
List of Samsung Galaxy CSC Country Specific Product code and region they belong to
List of CSC Country Specific code for Samsung Galaxy & various countries, regions, network carriers, model numbers, variants phone belong to.
www.androidsage.com
Thank you for your support and I hope I helped you!
Added SD Card Method too!
Added Odin Method!
Hi do you have a link for the one ui3.0 firmware cheers
Hello,
I'm currently trying to install lineage 17.1 and following the instructions from https://wiki.lineageos.org/devices/j7elte/install but after i install the recovery img it wont boot the factory reset menu.
This is my first time doing something like this, i'm not a power user so please be kind.
hello there, i see but can you please be more specific describing the problem, like attaching some pictures, what steps did you do or anything else that can be helpful, so the others can help your way out?
It was my fault, i didn't see it was volume up for recovery mode. But at the moment i have a much bigger issue. My device needs a firmware update but i cannot find the exact model. The one under the battery is just a basic version i presume so i cannot find the appropriate firmware.
what is it? j700f or j700m?
Just post the code you see that the above person posted.
It might be on the battery or on the box the phone came with.
It starts with SM-
J700h.
I downloaded a file from sammobile but it's single tar.md5 file don't know how to use it.
ah, you nneed odin, download it and put the tar.md5 file to AP field
Download Odin3
and dont forget to put the phone to download mode too
I recommend one of the patched versions cause they error less
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your S10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Phone) push Power + Volume Down buttons, while pushing them plug-in USB-cable to PC. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
Keno_I said:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your S10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Phone) push Power + Volume Down buttons, while pushing them plug-in USB-cable to PC. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
Click to expand...
Click to collapse
except that in this case you only need to put the file to the AP only
Keno_I said:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your S10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Phone) push Power + Volume Down buttons, while pushing them plug-in USB-cable to PC. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
Click to expand...
Click to collapse
7th step is the issue atm. The zip i downloaded contains just one tar.md5 file inside
DifferentPlays said:
except that in this case you only need to put the file to the AP only
Click to expand...
Click to collapse
okay then. just start? or do i need to check AP box?
Yeah, I couldn't type on my useless iPhone so I copied it from a text file I used to instruct people how to install firmwares with Odin.
Yeah only AP is needed so keep that in mind.
Although odin mode is red the bar is moving right now.
I'll update the result.
Dermenc said:
Although odin mode is red the bar is moving right now.
I'll update the result.
Click to expand...
Click to collapse
If it is flashing then no worries.
Samsung logo flashing.
Dermenc said:
Samsung logo flashing.
Click to expand...
Click to collapse
?
If it's not too idiotic can i install lineage after this? Or would that be dangerous?