Related
Hi, my rooted Sony Xperia E5 phone( F3311 ) has started to fail when I tried to download the PS4 Remote app with Magisk, I could see the app in Playstore but everytime that I downloaded it the app showed me an error, so I tried many things to pass through SafetyNet succesfully, and nothing. Finally, I thinked about it a while and I De-rooted my device, I noticed that it was a mistake when I couldn't root it again, so I wiped my device and re-installed the root. All was fine, but when I wiped the Cache it showed me an error, "the Cache is busy". Although, I decided not to care about it and reboot my phone, then many error messages appeared showing this: "Unfortunately X app has stopped". I restored the backup and configurated my device, but when I tried to go to Home Screen an error message appeared: "Unfortunately com.sonymobile.anondata has stopped" spamming infinitely on a black screen. I tried to restore my phone to default presets many times but all that messages cames up again when I boot for the first time. What can I do??
Help =(
Sound is low
The sound is low in xperia e5 and tried many methods to solve it but I couldn't make it
Hey there,
I can tell you've messed up your device.
Never wipe your device when you've removed system apps.
Also, don't use Magisk to root this device; it's better to not use it at all, cause it's known to have problems on the E5.
You will have to start all over and flash the stock firmware.
Download Flashtool on your PC and get the E5 drivers for fastboot+adb.
Open up Flashtool and connect your phone with us; it should give you some kind of indication that the connection has been established.
In Flashtool itself there's a button which, when clicked on, will load up an other program called Xperifirm.
In Xperifirm you'll have to search for the latest E5 F3311 firmware and download it.
When it's finished downloading exit the program, and if prompted, run the included script to extract and automatically flash the firmware.
After flashing you'll have an unrooted stock firmware, without any problems or error messages, which you can manually root again by following my guide here on xda.
If you want modules, just install Xposed Framework instead of Magisk.
Good luck.
Marvin.
mrmarvin_16 said:
Hey there,
I can tell you've messed up your device.
Never wipe your device when you've removed system apps.
Also, don't use Magisk to root this device; it's better to not use it at all, cause it's known to have problems on the E5.
You will have to start all over and flash the stock firmware.
Download Flashtool on your PC and get the E5 drivers for fastboot+adb.
Open up Flashtool and connect your phone with us; it should give you some kind of indication that the connection has been established.
In Flashtool itself there's a button which, when clicked on, will load up an other program called Xperifirm.
In Xperifirm you'll have to search for the latest E5 F3311 firmware and download it.
When it's finished downloading exit the program, and if prompted, run the included script to extract and automatically flash the firmware.
After flashing you'll have an unrooted stock firmware, without any problems or error messages, which you can manually root again by following my guide here on xda.
If you want modules, just install Xposed Framework instead of Magisk.
Good luck.
Marvin.
Click to expand...
Click to collapse
Hello, fortunately 1 day ago I did just that but without seeing your comment, but thanks a lot, you're by far a good user. I'm interested in your root guide for do it again but as it has to be made, again, thanks.
Hi,
i had a problem with bluetooth connection on my smartwatch Amazfit and I did a Factory Reset but when i tried to pair my watch because i unpaired the device so when i tried to scan QR code it says Cannot pair Amazfit Watch please go to Chinese mainland app store to download ... app to repair. So i downloaded you developer app and it didnt connect again because error appeared "please make sure your phone is nearby to the phone". Phone is near so what the..? I tried to: reinstall app from Play Store and yours Developer app, tried to hard reset, change language on mobile everything what was available at the internet. Can someone please help?
E: I forgot, i have installed the latest PACEfied ROM.
-Thanks, Steve.
This (eventually) worked for me - MUST make in bluetooth devices on phone FORGET THIS DEVICE . Only then start the app for pairing on phone!
Also had the same problem
Ftefan69 said:
Hi,
i had a problem with bluetooth connection on my smartwatch Amazfit and I did a Factory Reset but when i tried to pair my watch because i unpaired the device so when i tried to scan QR code it says Cannot pair Amazfit Watch please go to Chinese mainland app store to download ... app to repair. So i downloaded you developer app and it didnt connect again because error appeared "please make sure your phone is nearby to the phone". Phone is near so what the..? I tried to: reinstall app from Play Store and yours Developer app, tried to hard reset, change language on mobile everything what was available at the internet. Can someone please help?
E: I forgot, i have installed the latest PACEfied ROM.
-Thanks, Steve.
Click to expand...
Click to collapse
I also had this problem, and now the smartwatch is completely useless. After I updated my Pixel XL to Android 8.1, the sync problems started. I tried to make a reset (unpair, do a factory reset and try to pair again), but now I'm stucked on the QR Code screen. I read it with the Amazfit App, but when it tries to sync the previous information with the smartwatch, it gives me generic sync error. I also tried to skip the sync old information part, without success.
bicicletero said:
I also had this problem, and now the smartwatch is completely useless. After I updated my Pixel XL to Android 8.1, the sync problems started. I tried to make a reset (unpair, do a factory reset and try to pair again), but now I'm stucked on the QR Code screen. I read it with the Amazfit App, but when it tries to sync the previous information with the smartwatch, it gives me generic sync error. I also tried to skip the sync old information part, without success.
Click to expand...
Click to collapse
I have the same problem with my Nexus 6P updated to android 8.1.
Any idea?
gftrotta said:
I have the same problem with my Nexus 6P updated to android 8.1.
Any idea?
Click to expand...
Click to collapse
same problem. i tried everything. factory reset the phone, forget device on bluetooth. and still not working
hope someone would be able to fix it
Amazfit app was updated 15 hours ago on app store. Maybe is this the cause of this problem... i dont know
Hi, I just tried with updated version and is not working with Pixel XL and android 8.1
I had this problem with App 2.0.0 and PACEficator, had to find a original firmware on 1.3.0n, update do 1.3.5 and then everything works fine. Didn't flashed any other rom yet and things are good, so you guys might wanna do this. I got the rom from https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
pocotoh said:
I had this problem with App 2.0.0 and PACEficator, had to find a original firmware on 1.3.0n, update do 1.3.5 and then everything works fine. Didn't flashed any other rom yet and things are good, so you guys might wanna do this. I got the rom from https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
Click to expand...
Click to collapse
Hi are you running Android 8.1? I cannot get the app (2.0.0) to work. I created an account at xiaomi and allowed the acces to this account in the app. But it leeps throwing "data sync error, pleae try later" error messages.
Any help would be very appreciated
secondplayr said:
Hi are you running Android 8.1? I cannot get the app (2.0.0) to work. I created an account at xiaomi and allowed the acces to this account in the app. But it leeps throwing "data sync error, pleae try later" error messages.
Any help would be very appreciated
Click to expand...
Click to collapse
Use this one https://www.apkmirror.com/apk/huami...azfit-watch-1-7-4-4-dev-android-apk-download/
Sign in to your mi account and then install the 2.0 app.
Sent from my HTC 10 using Tapatalk
cyrusct82 said:
Use this one
Sign in to your mi account and then install the 2.0 app.
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
Thanks, signing into the 2.0.0 version worked now. But I still get the pairing errors after scanning the QR Code and accepting the bluetooth pairing request. It takes like ten seconds to do something, then it throws the error
I've just bought amazfit and had the same problem..... couldn't pair watch with my nexus 5x running android 8.1.
I tried older device with android 7.1 and it worked, then updated firmware in my watch and now it's working also with android 8.1
Sparrow318 said:
I've just bought amazfit and had the same problem..... couldn't pair watch with my nexus 5x running android 8.1.
I tried older device with android 7.1 and it worked, then updated firmware in my watch and now it's working also with android 8.1
Click to expand...
Click to collapse
What firmware version do you have?
Thank you
Sent from my Pixel XL using Tapatalk
How did you get that to work? I tried connecting it to another phone and then going back to my 6p, 8.1 and got nothing again.
---------- Post added at 12:28 AM ---------- Previous post was at 12:25 AM ----------
Sparrow318 said:
I've just bought amazfit and had the same problem..... couldn't pair watch with my nexus 5x running android 8.1.
I tried older device with android 7.1 and it worked, then updated firmware in my watch and now it's working also with android 8.1
Click to expand...
Click to collapse
When I tried this it told me that the watch was already up to date and couldn't be updated... How did you get it to work?? Driving me crazy.
joandroid said:
What firmware version do you have?
Thank you
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
ROM version: 1.3.5
in changelog was mentioned that it fixes pairing problem for android 8.0 and above
Sparrow318 said:
ROM version: 1.3.5
in changelog was mentioned that it fixes pairing problem for android 8.0 and above
Click to expand...
Click to collapse
I did the same as you and it's not working. I have 1.3.5 and amazfit the last from google play store. I have to try with 2.0 version i havent done it yet
Thanks for information
Sent from my Pixel XL using Tapatalk
Hi
With version 2.0 and firmware 1.3.5 I was able to pair and connect my watch with Pixel XL and Android 8.1
Thank you for you help
bicicletero said:
I also had this problem, and now the smartwatch is completely useless. After I updated my Pixel XL to Android 8.1, the sync problems started. I tried to make a reset (unpair, do a factory reset and try to pair again), but now I'm stucked on the QR Code screen. I read it with the Amazfit App, but when it tries to sync the previous information with the smartwatch, it gives me generic sync error. I also tried to skip the sync old information part, without success.
Click to expand...
Click to collapse
Guys if you have the generic sync error and you are stuck at QR code, try selecting an american server with a VPN BEFORE trying to open the Amazfit app: some italian users managed to pass it and sync again with this trick
Solved with an pre 7 device
If you by any chance have a pre 8.0 Android phone you can pair your device to that one and update it to firmware version 1.3.5. After that you can perform a factory reset of the watch and pair it to your Android 8+ phone and it will pair. Proved with a Pixel XL
I also got the same problem after the december upgrade of the Amazfit app. Lost contact with the watch, I have tried several hard factory resets, multiple reinstalled the apps, tried several different phones, now my watch keeps hanging in de XR screen, and is completely useless for me. No upgrade to fix this bug. Also no support. The watch has a great design, but software is crappy.
Hi, I use a Oneplus 5T and I´m trying pair with a Amazfit Pace, but i don´t gived success.
"Pair Failed" "Cannot connect to the watch, please keep the watch near the phone until the backup recovery te completed."
Can someone help me?
Thank´s
Hello. If Pace is brand new and phone has Android 8.0+, it won't pair. First pair with another phone with Android 7.1 or older (or an iPhone), update watch's firmware, unpair and then pair with your phone.
lfom said:
Hello. If Pace is brand new and phone has Android 8.0+, it won't pair. First pair with another phone with Android 7.1 or older (or an iPhone), update watch's firmware, unpair and then pair with your phone.
Click to expand...
Click to collapse
Hello,
I tried to do this but continued not paired with Oneplus... Paired with another android, but not paired with Oneplus.
Same error.
jeffersonbebe said:
Hello,
I tried to do this but continued not paired with Oneplus... Paired with another android, but not paired with Oneplus.
Same error.
Click to expand...
Click to collapse
Did you update the watch?
Quinny899 said:
Did you update the watch?
Click to expand...
Click to collapse
Even I am facing the same issue. I paired the watch with another Android phone, updated the OS to 1.3.6d and then tried to pair it again with my OnePlus 5t but still the same issue.
im_nishanto said:
Even I am facing the same issue. I paired the watch with another Android phone, updated the OS to 1.3.6d and then tried to pair it again with my OnePlus 5t but still the same issue.
Click to expand...
Click to collapse
What ROM on phone? Some versions have problems with Bluetooth, you may need to downgrade the ROM on phone.
lfom said:
What ROM on phone? Some versions have problems with Bluetooth, you may need to downgrade the ROM on phone.
Click to expand...
Click to collapse
I am using Open Beta Oreo Rom for OnePlus 5t.
For my part I have no problem. I am in android 8.1 and Rom WOS 2.6.0.12
I paired it the first time under android 8.0.
You need to clear the cache of the amazfit application.
im_nishanto said:
I am using Open Beta Oreo Rom for OnePlus 5t.
Click to expand...
Click to collapse
Hi, I faced similar problem few days ago. The watch just refused to pair with my phone. Tried to install and uninstall the watch OS many times still failed. At the end, we found that it was my phone OS problem. I tried to pair the watch with another phone and it paired without problem. I then clean reflashed my phone ROM and solved the problem. For your information, my phone is OP3T and the phone rom is MSM Xtended (android 8.1.0). Thanks @IFOm for his help
I suggest you reflash your phone rom.
Quinny899 said:
Did you update the watch?
Click to expand...
Click to collapse
I updated, but it stays in the same firmware 1.3.0n, saying that it is updated.
lfom said:
What ROM on phone? Some versions have problems with Bluetooth, you may need to downgrade the ROM on phone.
Click to expand...
Click to collapse
I updated, but it stays in the same firmware 1.3.0n, saying that it is updated.
chincheang said:
Hi, I faced similar problem few days ago. The watch just refused to pair with my phone. Tried to install and uninstall the watch OS many times still failed. At the end, we found that it was my phone OS problem. I tried to pair the watch with another phone and it paired without problem. I then clean reflashed my phone ROM and solved the problem. For your information, my phone is OP3T and the phone rom is MSM Xtended (android 8.1.0). Thanks @IFOm for his help
I suggest you reflash your phone rom.
Click to expand...
Click to collapse
Did you a hardreset in your phone?
lfom said:
What ROM on phone? Some versions have problems with Bluetooth, you may need to downgrade the ROM on phone.
Click to expand...
Click to collapse
I was same problem, and for repair it I has to factory reset OP5 (reflash ROM, I use beta too), after I downloaded amazfit watch from play store and pairing fine
kingofdevils said:
I was same problem, and for repair it I has to factory reset OP5 (reflash ROM, I use beta too), after I downloaded amazfit watch from play store and pairing fine
Click to expand...
Click to collapse
HI, first I need to update Pace's firmware, I can not.
jeffersonbebe said:
Did you a hardreset in your phone?
Click to expand...
Click to collapse
I cleaned flash the ROM. If you check xda, normally the op will give you clear instruction how to do clean reflash. After reflash, you need to setup your phone again.
jeffersonbebe said:
HI, first I need to update Pace's firmware, I can not.
Click to expand...
Click to collapse
Why? pace firmware don´t affect to sync it with phone, you can update pace later
kingofdevils said:
Why? pace firmware don´t affect to sync it with phone, you can update pace later
Click to expand...
Click to collapse
Old Pace 1.3.x firmware won't sync with Android 8.0+ and newest iOS, firmware must be updated first using another phone.
I has stockfied 1.3.6 and 8 Oreo and sync perfect, since December to May, I changed rom for wos2, same phone and beta, like OP
This should work: pair the watch using your account using another phone, then put watch in airplane mode (so it will disconnect from phone) and uninstall Amazfit app and remove watch from phone's Bluetooth settings (watch won't be unpaired, so no factory reset). Then go to your phone, make sure the watch isn't listed in Bluetooth settings, install the same app version used before, turn off airplane mode on watch and login to your account. The watch and phone should show the usual pair request with a pin code, confirm in both and they should be paired. If it doesn't happen then your phone's Bluetooth cannot see the watch for some reason... I have done this thousands times and it always worked if the phone can find the watch.
I have the OnePlus 5T and when I got my watch I had the same problem.....all you have to do is
1) Downgrade to Android 7
2) Pair the watch let it update to latest firmware
3) Update your OnePlus 5T to Android 8.0/8.1
4) Enjoy your brand new Pace
........................................................................................
ALTERNATIVE
Use a second phone that is on Android 7
Pair the watch and update it
Then unpair it
Go to OnePlus 5T and pair it
It should work either way?
I live in China and bought an Amazfit Bip from Tmall. My googling had indicated that since ~2017 or 2018, the watch will switch languages into whatever the phone language was set to. So I bought one only to later find out this is no longer true in 2019. I contacted support, and they told me Amazfit Bips sold in China are unable to change the language, even just to English. What? When did that change? How come all these people who bought it before me were able to change the language so easily? I was angry.
Even Amazfit's official online support page is not helpful with random dates splattered around confusing me even more as to if this is changeable or not. Trying to find a way to do it only made me find either outdated procedures from 2016, or people in 2019 asking how to do it, with no answer!
So after a lot of research and trial and error, I finally managed to change the Chinese Bip into an International Bip with an English interface. So here is how I did it.
I am in no way responsible if you brick your Bip!! Flashing firmwares is always a risky procedure. You have been warned.
- Prerequisites:
An Amazfit Bip A1608 (Chinese version).
Make sure your Bip is paired with MiFit
Official Firmware v.1.1.5.04 stable
Gadgetbridge
Custom firmware from here or here
- Procedure:
1. Go to the Amazfit Bip settings page in MiFit and set the Discoverable setting to ON
2. Then scroll down to the end of the settings page and unpair your Bip from MiFit
3. Turn the Bip on and off again (The very last option in the watch's settings. Once tapped, tap yellow side for OK). Restart your phone too.
4. Download and install gadgetbridge from F-Droid. You can either just download or install the apk from that link, or install it directly from F-droid if you have it.
5. Turn on Airplane mode, and then turn Bluetooth and Location services back on.
6. Open gadgetbridge, and pair your Bip.
7. Take the official firmware you downloaded from here: Firmware v.1.1.5.04 stable for the Bip. We need this to downgrade the Bip to an older firmware to flash the "hacked" firmware that changes the Bip from the Chinese to International version.
8. Unzip the Firmware v.1.1.5.04 somewhere on your phone.
9. Open a file explorer and open the folder where you extracted the files. Tap to open Mili_chaohu.fw and it should give you the option to open it with gadgetbridge. Gadgetbridge will then give you the option to Flash it. Flash it, then repeat the same process for the other files in this order:
Mili_chaohu.ft
Mili_chaohu.res
Mili_chaohu.gps
Note: I used the non-latin files because I only need English and Chinese characters, so I don't know if the procedure works with the .latin files. If you do try it with the .latin versions and this all works properly, let me know!
10. Take the custom firmware you downloaded from here or here (that will convert your Bip into an international version) and extract it somewhere on your phone. Ignore the included gadgetbridge.apk
11. Click the 3 dots in gadgetbridge and check your HW ID.
- If your HW ID is : v0.11.1.4 then flash: "Mili_chaohu_CE_1.fw"
- If your HW ID is : v0.11.131.5 then flash: "Mili_chaohu_CE_131.fw"
Open the corresponding file in gadgetbridge like you did before and flash it
From my understanding, this procedure essentially changes the hardware ID in the firmware to the International ID.
12. Once flashed, go to your Bip's settings (on the watch) and perform a factory reset. This is the last setting on the second page of the settings (the second option from the bottom). Tap it, tap the yellow button for OK, then hold the side button for a bit to reset the watch. Your watch will then be reset.
13. Re-pair your watch to Gadgetbridge. Your watch should now be an International version, in English. You can now uninstall Gadgetbridge if you wish
14. Re-pair your watch to MiFit. It will upgrade the firmware fonts gps etc. to the latest version. Let it finish, and if everything went well, the Bip's interface will remain in English. Congratulations!
So this is how I did it. Some steps might be unnecessary, but I am not going to test them now that my watch is in English and works properly. It took a lot of trial and error and flashing until I figured out that the key was to downgrade the firmware to v.1.1.5.04 for it to work. Let me know if something was unnecessary when you did it.
Credit:
This post helped point me into the right direction, so thank you! The following posts were also helpful. Thanks!
This is the youtube video that gave out the files necessary to do this. Shout out to them for detailing the procedure and giving out the necessary files. Thank you!
hope you can figure out how to do the same thing for amazfit gtr, because I bought a chinese version, I can't change it to english. Thank you in advance
medkid said:
hope you can figure out how to do the same thing for amazfit gtr, because I bought a chinese version, I can't change it to english. Thank you in advance
Click to expand...
Click to collapse
So it's the same issue with the GTR? Sorry to hear that, and I really wish I could help but I only have a Bip. I hope someone finds a way to change the language on the GTR soon.
For me I would like to flash my bip back to Chinese version. I need Chinese fonts but I have converted my Bip to French version and if I flash the Chinese firmware, everytime I open MiFit it just update it back to French! any way to find how to revert my Bip back to Chinese version? Thanks.
Qidamin said:
For me I would like to flash my bip back to Chinese version. I need Chinese fonts but I have converted my Bip to French version and if I flash the Chinese firmware, everytime I open MiFit it just update it back to French! any way to find how to revert my Bip back to Chinese version? Thanks.
Click to expand...
Click to collapse
Did you try flashing just the font, the .ft file for the Chinese version (non-Latin font), without the rest?
I think I did, but everytime I am opening the MiFit app it will update the fonts. I have converted the Bip to Global version before flashing global firmware, so now my watch is like international version. I would like to know how to convert it back to Chinese version.
Qidamin said:
I think I did, but everytime I am opening the MiFit app it will update the fonts. I have converted the Bip to Global version before flashing global firmware, so now my watch is like international version. I would like to know how to convert it back to Chinese version.
Click to expand...
Click to collapse
You need to detail exactly what you flashed and how, and where you got the file you flashed from? There are many custom font files out there like the one with emojis and Mi Fit doesn't always reflash them from my experience, so you may be using the wrong file, or may need a patched MiFit apk that won't overwrite it every time.
Also, the Chinese version will be 100% in Chinese, so I'm not sure that's what you want if all you need is to display Chinese characters in notifications. But that's beyond the scope of this thread, so I suggest you open a new thread and write in detail what you did and what happens and I'm sure you'll find a solution to the issue.
The links are not working any more
Bonegrindifier said:
I live in China and bought an Amazfit Bip from Tmall. My googling had indicated that since ~2017 or 2018, the watch will switch languages into whatever the phone language was set to. So I bought one only to later find out this is no longer true in 2019. I contacted support, and they told me Amazfit Bips sold in China are unable to change the language, even just to English. What? When did that change? How come all these people who bought it before me were able to change the language so easily? I was angry.
Even Amazfit's official online support page is not helpful with random dates splattered around confusing me even more as to if this is changeable or not. Trying to find a way to do it only made me find either outdated procedures from 2016, or people in 2019 asking how to do it, with no answer!
So after a lot of research and trial and error, I finally managed to change the Chinese Bip into an International Bip with an English interface. So here is how I did it.
I am in no way responsible if you brick your Bip!! Flashing firmwares is always a risky procedure. You have been warned.
- Prerequisites:
An Amazfit Bip A1608 (Chinese version).
Make sure your Bip is paired with MiFit
Official Firmware v.1.1.5.04 stable
Gadgetbridge
Custom firmware from here or here
- Procedure:
1. Go to the Amazfit Bip settings page in MiFit and set the Discoverable setting to ON
2. Then scroll down to the end of the settings page and unpair your Bip from MiFit
3. Turn the Bip on and off again (The very last option in the watch's settings. Once tapped, tap yellow side for OK). Restart your phone too.
4. Download and install gadgetbridge from F-Droid. You can either just download or install the apk from that link, or install it directly from F-droid if you have it.
5. Turn on Airplane mode, and then turn Bluetooth and Location services back on.
6. Open gadgetbridge, and pair your Bip.
7. Take the official firmware you downloaded from here: Firmware v.1.1.5.04 stable for the Bip. We need this to downgrade the Bip to an older firmware to flash the "hacked" firmware that changes the Bip from the Chinese to International version.
8. Unzip the Firmware v.1.1.5.04 somewhere on your phone.
9. Open a file explorer and open the folder where you extracted the files. Tap to open Mili_chaohu.fw and it should give you the option to open it with gadgetbridge. Gadgetbridge will then give you the option to Flash it. Flash it, then repeat the same process for the other files in this order:
Mili_chaohu.ft
Mili_chaohu.res
Mili_chaohu.gps
Note: I used the non-latin files because I only need English and Chinese characters, so I don't know if the procedure works with the .latin files. If you do try it with the .latin versions and this all works properly, let me know!
10. Take the custom firmware you downloaded from here or here (that will convert your Bip into an international version) and extract it somewhere on your phone. Ignore the included gadgetbridge.apk
11. Click the 3 dots in gadgetbridge and check your HW ID.
- If your HW ID is : v0.11.1.4 then flash: "Mili_chaohu_CE_1.fw"
- If your HW ID is : v0.11.131.5 then flash: "Mili_chaohu_CE_131.fw"
Open the corresponding file in gadgetbridge like you did before and flash it
From my understanding, this procedure essentially changes the hardware ID in the firmware to the International ID.
12. Once flashed, go to your Bip's settings (on the watch) and perform a factory reset. This is the last setting on the second page of the settings (the second option from the bottom). Tap it, tap the yellow button for OK, then hold the side button for a bit to reset the watch. Your watch will then be reset.
13. Re-pair your watch to Gadgetbridge. Your watch should now be an International version, in English. You can now uninstall Gadgetbridge if you wish
14. Re-pair your watch to MiFit. It will upgrade the firmware fonts gps etc. to the latest version. Let it finish, and if everything went well, the Bip's interface will remain in English. Congratulations!
So this is how I did it. Some steps might be unnecessary, but I am not going to test them now that my watch is in English and works properly. It took a lot of trial and error and flashing until I figured out that the key was to downgrade the firmware to v.1.1.5.04 for it to work. Let me know if something was unnecessary when you did it.
Credit:
This post helped point me into the right direction, so thank you! The following posts were also helpful. Thanks!
This is the youtube video that gave out the files necessary to do this. Shout out to them for detailing the procedure and giving out the necessary files. Thank you!
Click to expand...
Click to collapse
The links are not working any more the frimware not downloadble and the uploaded files are damaged and can't open
Please upload new files somewhere that we can download . Thanks ??
Masoodtirip said:
The links are not working any more the frimware not downloadble and the uploaded files are damaged and can't open
Please upload new files somewhere that we can download . Thanks ??
Click to expand...
Click to collapse
Which links are not working and which files are damaged? I just tried downloading them and they seem to download fine on my end.
The official 1.1.5.4 is ok but the custom frimware links are downloaded but when I try to open that tell me the rar file is damaged .I try to download again and again with phone and PC but no different and tell me damaged ?
Would you please upload it again an other place ?
Thank you very much
I have a Chinese version bip with a 1.1.6.34 and this is really work. My bip os now in Portuguese and a 1.1.6.36 international version.
Hi, i follow the procedure exactly and my bip watch(lite) is now English. but it keeps updating the GPS firmware. i think i flash the amazfit bip firmware not the bip lite firmware version. Please help me how to resolve it. thank you.
zootv said:
Hi, i follow the procedure exactly and my bip watch(lite) is now English. but it keeps updating the GPS firmware. i think i flash the amazfit bip firmware not the bip lite firmware version. Please help me how to resolve it. thank you.
Click to expand...
Click to collapse
Hi, I wish I could help, but this probably works only with the standard bip and not the lite. I'm surprised it even worked, so that's a good sign already. I hope someone else can help you!
dfujise said:
I have a Chinese version bip with a 1.1.6.34 and this is really work. My bip os now in Portuguese and a 1.1.6.36 international version.
Click to expand...
Click to collapse
Happy to hear it worked for you!
Bonegrindifier said:
Happy to hear it worked for you!
Click to expand...
Click to collapse
Hello, The Offical firmware link didn't work. Can you upload official firmware if you have available?
---------- Post added at 10:16 AM ---------- Previous post was at 09:18 AM ----------
dfujise said:
I have a Chinese version bip with a 1.1.6.34 and this is really work. My bip os now in Portuguese and a 1.1.6.36 international version.
Click to expand...
Click to collapse
Hello, Can you upload Official Firmware v.1.1.5.04 stable? Because the author firmware link is dead and I need this firmware. Thanks.
You can find fw version 1.1.5.04 inside the assets directory of MiFit v3.5.4 that you can find on apk mirror.
Open apk with 7zip and extract the Mili_chaohu.xxx files you need.
Source
Bonegrindifier said:
Which links are not working and which files are damaged? I just tried downloading them and they seem to download fine on my end.
Click to expand...
Click to collapse
Hello
link does not work:404
https://amazfitwatchfaces.com/firmware
7th man said:
Hello
link does not work:404
Click to expand...
Click to collapse
the amazfitwatchfaces doesn't have a firmware download section anymore, only watchfaces
Please upload Official Firmware v.1.1.5.04 stable. Without it your efforts will be lost.
Translated by Google
Bonegrindifier said:
Hi, I wish I could help, but this probably works only with the standard bip and not the lite. I'm surprised it even worked, so that's a good sign already. I hope someone else can help you!
Click to expand...
Click to collapse
hi, i finally got my Bip Lite back to its stock firmware and update it to the latest Bip lite version. if somebody wants to convert their Bip Lite to English. just follow the procedure on this thread. just flash the stock firmware( A1915) for Bip Lite after you flash all the files.
Thanks guys for helping me convert my chinese Bip lite to english.
Hi guys, I update my Emui 9 to 10 thru OTA, but after restart it shows me your device has loaded a different operating system.
I did try go into erecovery mode select update thru wifi, but it shows me package obtain fail.
so anyone has lda-l09 c636 firmware, I want to try hisuite rewrite.
Regards