I'm trying to figure out how to install Orange Fox recovery in order to install Derp in Realme XT. However, that first pinned Thread on how to install basic things seems to be a little dated and I'm afraid of messing up.
From what I've gatherd so far these are the steps required:
1. Upgrade the Realme Xt phone to the lastest stock firmware/ROM;
2. Unlock the bootloader, by going to realme xt website and following instructions;
3. Install TWRP;
4.1. Install Orange Fox (it seems that Orange fox requires to install TWRP first);
5. Flash Derp in recovery mode, using Orange fox;
6. Flash Magisk;
7. Reboot to system and enjoy ;-)
Is that correct? Is anything else needed?
Related
Helo friends, I am new to redmi note 3 (sd). I officially unlocked the boot loader. I updated my device to 7.3.2 using miflash. I tried to install TWRP. I flashed the TWRP img and modified img. I tried to enter TWRP by pressing vol+ & power button. BUT no recovery was found . Simply Phone with cable image is showing in display. I followed all the steps carefully. I tried Cofface version and also the latest one.
Somebody please guide me step by step procedure to install TWRP. Somebody have the proper modified image for 7.3.2??? If yes means please give me the link.
In 7.1.8 i was able to get the TWRP. Is there any way to update to miui 7.3.2 by TWRP from 7.1.8
MIUI overwrites your recovery, disable it with the ALKA recovery, which can be found in Santosh's thread.
Here is what I did, to make TWRP workable, and it's very easy, no pc needed.
1. Install flashify
2. Install twrp with flashify but do not reboot yet
3. copy alka twrp to your phone
4. when it's done reboot your phone in flashify (right corner, reboot to recovery)
5. make system r/w (you will lose ota but screw it..., no other way to make twrp permanent on the phone)
6. flash alka update
7. reboot in twrp -> system
8. TWRP will give you a pop-up which tells you that you would like to disable the stock recovery, and just simply allow it to do it.
9. boom, done
Thanks bro!!!!!!!
Now i got both root and recovery on 7.3.2
balazs312 said:
MIUI overwrites your recovery, disable it with the ALKA recovery, which can be found in Santosh's thread.
Here is what I did, to make TWRP workable, and it's very easy, no pc needed.
1. Install flashify
2. Install twrp with flashify but do not reboot yet
3. copy alka twrp to your phone
4. when it's done reboot your phone in flashify (right corner, reboot to recovery)
5. make system r/w (you will lose ota but screw it..., no other way to make twrp permanent on the phone)
6. flash alka update
7. reboot in twrp -> system
8. TWRP will give you a pop-up which tells you that you would like to disable the stock recovery, and just simply allow it to do it.
9. boom, done
Click to expand...
Click to collapse
as for me the app freezes when I try to install twrp leaving me with a recovery-less phone help!
pandyajoe said:
Helo friends, I am new to redmi note 3 (sd). I officially unlocked the boot loader. I updated my device to 7.3.2 using miflash. I tried to install TWRP. I flashed the TWRP img and modified img. I tried to enter TWRP by pressing vol+ & power button. BUT no recovery was found . Simply Phone with cable image is showing in display. I followed all the steps carefully. I tried Cofface version and also the latest one.
Somebody please guide me step by step procedure to install TWRP. Somebody have the proper modified image for 7.3.2??? If yes means please give me the link.
In 7.1.8 i was able to get the TWRP. Is there any way to update to miui 7.3.2 by TWRP from 7.1.8
Click to expand...
Click to collapse
Tried to used this the latest from miui forum, redmi note 3 pro Snapdragon version: http://en.miui.com/thread-296053-1-1.html
Sent from my Redmi Note 3 using XDA-Developers mobile app
I dont want MIUI and useless extra app so i have to install custom rom.
First step is unlock bootlader with mi unlock app okay. But my question is how can i install custom rom ?
TWRP or Clockwork Mod ???
Using TWRP i have to install it first after that i have to install recovery.img and lazyflasher unless my phone gonna brick and its too complicated.
What about Clockwork Mod ?? is it different method ?
I guess i found my path.
1)Installing ROM MANAGER from Play Store of course with rooted device.
2)Install inside of app Clockwork Mod
3)Select custom rom from SD Card and select Gapps,backup,wipe data...
and device gonna reboot do everything automatic is that true and simple ?
My question is using rom manager and install custom rom like that or i have to something extra.
Sorry about my english...
I don't have the phone yet, but i had redmi note 3 before and installing twrp was simply putting it in fastboot mode and using adb command "Flash recovery xxxxx.img" and you are set, considering you have an unlocked bootloader that is. then you follow the installing instructions given by the developer, usually (flash rom.zip followed by gapps.zip). But ofcourse i don't have the phone so take what i said as a refernce only and wait for someone else' reply. as of clockwork recovery, i think twrp is easier to use but there is generally no major diffrence.
Forgot Clockworkmod even existed. Have been using TWRP for ages.
cwm has reached end of support.
https://forum.xda-developers.com/showthread.php?t=2201860
use twrp
CWM is dead, twrp is one and only option otherwise there is also Red wolf recovery available.
Steps to install a custom Rom.
Unlock bootloader
Flash TWRP
Flash lazyflasher.zip, reboot
Now DL any Rom.zip and desired Gapps package
Boot into TWRP again
Backup (just incase)
wipe > advanced wipe > wipe everything except internal / SD card
Flash firmware.zip, if you're coming from marshmallow based Miui
Flash Rom.zip followed by Gapps
?? ¿
Profit
Hey, recently I've updated to miui 11 and I've unlocked the bootloader long ago but I couldn't install twrp on my phone, every time I push the up volume button and power it leads me to the mi recovery, and if I press down volume button it leads me to the fastboot with that communist rabbit.
I'm quite tired of trying over and over watching every tutorial of Hindi kids speaking as fast as a squirrel and I just want to know if someone did it with miui 11 working and explain me how to install that damned custom recovery
I think someone has to build the recovery, because I tried to flash the TWRP, but I can't install it.
TWRP that is compatible for Redmi 6A MIUI 11 does not exist yet.
Even the previous version of "MIUI v10.4.4.0" which now used "Android 9 or Pie" replacing ""Android 8.1" had to use an unofficial modified TWRP to get it working.
if i update via twrp with the v11.0.5recoverymode zip file what happen? it will brick?
well, i did it
the update package install normally without errors for me, but when i try to enter in twrp, it is erased, instead is the stock recovery lul
my steps:
>Previusly have Android 9 Pie MIUI 10 (i think was v10.4.4) with TWRP 3.3.1 MOD (For pie) and root with magisk (20.0)
> Donwload the recovery package (1.4GB in MIUI11 oficial you can donwload it)
> Go to TWRP in your phone
> Install the package
> Reboot
- I did not install the Magisk bacause i forgot that, but the system runs normally
- I dont know what happen if you root the phone after zip installation (maybe brick)
- You will erase your TWRP, basically you will have a stock phone
- Now there isnt a TWRP official or mods for MIUI V11.0.5
gusitir said:
well, i did it
the update package install normally without errors for me, but when i try to enter in twrp, it is erased, instead is the stock recovery lul
my steps:
>Previusly have Android 9 Pie MIUI 10 (i think was v10.4.4) with TWRP 3.3.1 MOD (For pie) and root with magisk (20.0)
> Donwload the recovery package (1.4GB in MIUI11 oficial you can donwload it)
> Go to TWRP in your phone
> Install the package
> Reboot
- I did not install the Magisk bacause i forgot that, but the system runs normally
- I dont know what happen if you root the phone after zip installation (maybe brick)
- You will erase your TWRP, basically you will have a stock phone
- Now there isnt a TWRP official or mods for MIUI V11.0.5
Click to expand...
Click to collapse
So right now your phone is on MIUI 11 but not rooted correct?
Just now. I just installed TWRP and have root on my phone. All seems to be working fine.
For whatever reason I can't budge the tool to flash the latest fastboot ROM on my Xiaomi Mi 8 Lite that I plan to sell since my new phone arrived today. A custom ROM from the last year is currently installed on the device.
I installed the latest Universal ADB drivers, installed the latest Mi Flash tool (2020.3.14.0), put the phone in fastboot mode, connected to PC via USB 2.0 port and tried to flash the latest fastboot stable ROM via the tool with "clean all" option and most of the time what happens when I hit the flash button, the fastboot logo on the phone disappears and in the left top corner a small white text "hit any button to restart" or something like that appears. Only once a progress bar appeared with $fastboot bla bla bla II echo missmatching image and device" and that was it... no progress, again the white text prompting me to hit any button to restart appeared on the screen.
Any ideas what I am doing wrong? cmonBruh
Phone: Xiaomi Mi 8 Lite 64/4 Global (platina with custom ROM installed) Windows 10 Pro 1909, MSI B350M Bazooka with AMD Ryzen 5 2600.
Hello.. I will try to help you.. And tell me if you fixed that..
Can you install a custom recovery? Twrp?
Id you can do that fallow my steps..
First download the fallowing twrp from here :
https://drive.google.com/file/d/14cRc4UG4hzL45cDhdFZ7odr5Kb8LSai0/view
It can support ota update and your phone will boot I used it to flash my mi 8 lite without pc. And works!
Download and flash that twrp using mi flash tool. I hope your bootloader is unlocked if you already have other twrp installed simply flash the twrp zip file. And update your recovery. If you don't have any twrp installed simply rename. Zip file into .img file and flash it with flash tool. If you can't flash it using flash tool try to install any other twrp and then install the zip and update the twrp
After you installed twrp go and download recovery Rom from here :
https://mirom.ezbox.idv.tw/en/phone/platina/
Download the first rom called : V11.0.2.0.QDTMIXM (1.8GB zip file)
( Recovery
miui_MI8LiteGlobal_V11.0.2.0.QDTMIXM_5574e03233_10.0.zip
Filesize
1.8G
MD5
5574e032330450c44c34d7f054de477b
Link
Download (Download to Mi Router)
Press download. Not download to mi router and don't forget.. Download the recovery zip file not the fast boot update!
After you downloaded boot in to twrp which I gave you above, wipe system / data / vendor / cache/dalvik and flash the zip file.
You can flash it with and without to wipe anything. But it is recommended to wipe. Pls go try and install it without to wipe anything, if it works ( for me works!) after flash done boot the phone and see if there is any problem. If u got any bugs or problems perform a clean flash wipe all and then flash!
Id you want root.. Fallow this :
You can root your phone with latest magisc manager using the same twrp. After you flash the boot.img with twrp press restart phone. If it won't restart go again to recovery and format only your data. And your will phone will boot again and you will get root acces. It's the only way to root android 10.
Please let me know if you fixed that problem.. And you flashed successfully the Rom..
DON'T FLASH THE ROM USING ANOTHER TWRP! ONLY THAT RECOVERY I GIVE SUPPORT OTA UPDATE AND CAN BYPASS THE XIAOMI Verification FOR THE STOCK ROM.. IF YOU USE ANY OTHER TWRP YOUR PHONE WILL BE STUCK IN Boot! Orange fox or any other twrp won't work!
I used this method and works like a charm
Hi my oneplus nord 2 pac man edition has the stock Android 12 / DN2103_11_C.12How can I install the twrp to flash the new a13 Roms like derpfest?
Is there a way to do this without a windows pc?
Thx looking forward to try new roms.
yes its possible, first install the latest version of framaroot here https://forum.xda-developers.com/t/root-framaroot-a-one-click-apk-to-root-some-devices.2130276/
then on top select install supersu and at the bottom there will be 3 options of rooting, try all of the until one works, after roting install the twrp app here https://dl.twrp.me/twrpapp/me.twrp.twrpapp-26.apk.html
and then when you have rooted and installed the twrp app, agree to everything in the twrp app and its important to select use wirh root permissions, then you will have three options, select file to flash, flash to recovery, flash to boot, click on select file to flash, then select the twrp for a12, and flash to recovery, then reboot to recovery and boom you have twrp, if flash to recovery doesnt work try flash to boot.