Huawie Y6 Prime 2018 Hardbricked after update with HiSuite - Huawei Y6 Questions & Answers

Three Days Ago, Recieved an Update Via Hisuite. after the update was sent to the Phone, it rebooted, completed the Update and Never turned on after then. i waited hours until i found out my Phone was probably hardbricked as it won't turn on, go to recovery, won't enter fast boot mode or even show the charging Animation. in Basic words, the Phone Just acts Dead.
When Pluged into PC its Detected as Qualcom HS-USB QDLoader 9008 . i've Tried several methods to flash a stock ROM but all have failed. any help?
PS. The Phone has never been rooted at any point & the bootloader remains locked because i have never attempted unlocking. Developer Options was enabled before the Hardbrick

Related

[q] brick, kdz usb error

Hi, I was looking everywhere since yesterday but can't find a solution. I had cwm + twpr + lollipop cm12. I've decided to back to stock, so as allways: driver, b2cApp, kdz, v20h and v10a, usb, s/w mode, xml parser, shhtp, etc... Standard offline kdz method. But during flashing I stuck on 15% and get the info that my phone anad pc are not connected by usb cable, I tried changing usb ports at pc, reinstaling everything, but I have still the same error. If that woldn't be much enough I ****ed something up and I think I don't have any recovery right now
I can put my phone in s/w mode but I stuck on 15% with usb not connected error.
I can put my phone in fastboot mode but my pc does not recognize it, its just pluging in and out it from windows.
I can put my phone in stuck on LG logo 'mode'
Any help? How to unbrick it? How to flash stock or at least some custom recovery? Of course unlocked bootloader. Please help me :crying:
Key it ****ed up even more.
When kdz show me to connect my cable i clicked retry, plugen cable out and in, kdz found my device, and go to step 2. In half way I had again the same error, so again clicked retry, plug out, plug in. Again founded my device, when I had downloaded 100%, same situation. founded my device, log that tool is extracting kdz and nothing. Waiting about ~1,5h, nothing happend, so I diconected cable. In that moment kdz go to third step and I get windows force close for not repodnig app kdz. I said a loud **** and started again. Phone has not been found anymore by kdz. After a few tries, booted to fastboot, and connected to computer. It has been found as Google Fasbtoo USB, no way to update driver to fastboot. I disconected phone and decided to try again with s/w but nope. S/W not turning on anymore (with or without battery). Fastboot not turning on any more. Just LG logo, when I'm connecting device to PC it is sometging pluging in and out but nothing showing in device manager
Any ideas? Please!
I have the SAME problem with my (now old) LG... I read more than 20 tutorials for getting back to stock and nothing
Sent from my GT-I9205 using XDA Free mobile app
I triend on clen frsh windows I get OMAP device, fastboot is finding my device but wont start fastboot mode in my phone, when trying to flash cwm I get security error and still no s/w mode So I'm affraid that we have to say goodbay to our L9
What's more:
1. Can't find orginal p760 recovery, tried to flash p769 and I get wird effect, after LG logo screen looks like broekrn, some color stripes and all display going to white, then turn off.
2. Using fastboot and choosing options wit u-boot making my phone turning to LG logo with no security error, still no s/w, fastboot or recovery mode.
3. Using option 1 (1. Fastboot) from the fastboot tool is making my phone turnig black screen and nothin more, no even LG logo.
Please can anyone help us?

Xiaomi Redmi Note 3 Bricked not responding at all

Hi,
I got my new phone a couple of days back, installed CM13 (officially unlocked, did that with TWRP + install ROM) probably incorrectly because i couldn't get the fingerprint sensor and other stuff to work at all.
Today my phone turned off by itself with around 70% of battery left and it's not responding anymore. Cannot go into Recovery mode, not even to Fastboot. Connected it to the charger and have the red light of the devil blinking... Tried to do everything i found online but i couldn't get into EDL mode (and then Flash through MiFlash), since fastboot is not working at all.
I really don't wanna have to open the back of the phone and. What can i do to save the phone? Is there any proven solution and a comprehensive guide to this (for a total idiot like me)?
Yes there is deep flash cable method search on xda/youtube it works like a charm,😉, this method saved me once
Try this (http://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055) works 100%
Try to disconnect and reconnect the battery.
This has kicked me into EDL mode once and after flashing it was fine
Both methods are sound, but if you decide to remove the back cover, remember to eject the SIM card tray first
Thanks for the replies, i was hoping i wouldn't have to have to open the back cover and disconnect the battery but it seems to be the only option at this point.
The deep flash cable doesn't seem that difficult tho, why don't you give it a shot? It seems like that's what they use at MI service centres after all.
So i have managed successfully to have the pc recognise the device as Qualcomm Hs USB Qdloader 9008, opened the MiFlash tool and recognised the device, but when i try to flash a stable MIUI rom i get an error: "Write timed out" as many times i tried to do it.
Does anybody have a suggestion?
My device was unlocked officially and i have no recovery no fastboot nothing at all.
alphax_ said:
So i have managed successfully to have the pc recognise the device as Qualcomm Hs USB Qdloader 9008, opened the MiFlash tool and recognised the device,
Click to expand...
Click to collapse
Which method you used - Deep Flash cable or Battery disconnect?
Yeah sorry i did not mention it, disconnected the battery.
i tried the battery removing method but the phone is not responding
now need to try cable method
Ryan Raghendh said:
i tried the battery removing method but the phone is not responding
now need to try cable method
Click to expand...
Click to collapse
Get into EDL

Remdi Note 3 (kenzo) completely dead

Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
Try again to boot in fastboot mode by pressing vol down + power button for 10 to 20 second if booted into fastboot then release buttons
Try to unlock your device from mi unlock tool
Then it must boot
Try going to Fastboot Mode using Power Button and Vol Down. If you can go to Fastboot, then I'm pretty sure you'll be able to go to EDL Mode. Just look up online how to go to EDL Mode from Fastboot. I think the command to be typed in the cmd window is 'fastboot reboot edl'.
If that works, and you have your Qualcomm drivers installed, you should be able to flash a Fastboot ROM using Mi Flash Tools.
Cheers!
[email protected] said:
Try again to boot in fastboot mode by pressing vol down + power button for 10 to 20 second if booted into fastboot then release buttons
Try to unlock your device from mi unlock tool
Then it must boot
Click to expand...
Click to collapse
I can't seem to get to fastboot or recovery using the button combinations.
It does not even power on, even though i have charged for 8 hours now.
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
manakmishra said:
I can't seem to get to fastboot or recovery using the button combinations.
It does not even power on, even though i have charged for 8 hours now.
Click to expand...
Click to collapse
Open kenzo a.k.a. redmi note 3 disconnect battery
Then connect USB just to mobile not to PC
Then connect battery don't press any button
Connect USB to PC while pressing volume up button
Start mi flash tool click on refresh button see if it detects.
Start flash
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
Simply do this : https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Then flash latest global dev rom in Miflash (refresh when phone isn't detected http://en.miui.com/a-234.html
since you can't boot, it might be worth your time to take a look at this.
https://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055
It's a tutorial to make a 'deep-flash' cable using a micro usb cable that will force your device into fastboot mode, much like samsung's USB jig.
If that works, then you can try following this tutorial :
http://en.miui.com/thread-235865-1-1.html
You can use the link given in post #6 to boot to edl, then flash a stock MIUI ROM using MiFlash.
If all else fails, it might be time to consider taking it to the Mi service centre.

Revived Hard Bricked Lg Leon

Hello everyone,
My dad has a Lg Leon H340F, which I tried to update without success to Android Marshmallow I followed the post "How to update LG Leon H340N to Android M and Unlock the Bootloader"
The first time I flash it, the tool showed that it was completed successfully but the phone didn't turn on, it was in a bootlop,
I thought I had done something wrong, so I tried again,
the second time the phone showed "COM5" while was flashing, the tool again showed the process was successfully completed but the phone was still in a bootloop, it no longer allowed me to enter the download mode,
When I connected it to the computer by pressing the volume down button, the charging icon appeared, the LG Flash Tool program no longer recognized it.
When I turned it on normally and while it was in the bootloop I connected it to the computer, it emitted the sound that something had been connectedt, but the LG Flash Tool did not recognize it either.
I thought all was lost,
I decided to try it with the official tool LG Mobile Support Tool, It did not recognize it either,
Then I realized that there was an option called "recovery error update" in which I was asked for the IMEI number, I entered it, and later it began to download the firmware, and was successfully installed on the smartphone.
Now he's alive, with lollipop, but alive.
I do not know if it will work in other cases, but give it a chance.

Nokia 7.1 - Problems entering EDL mode

Hi Everyone,
I have a 4 year old Nokia 7.1 that was working fine a week ago with Android 10.
I accidentally let the battery drain out, phone would not turn on - no Android, no download mode, nothing on the screen however I turn it on - power/volume up/down, etc
I have replaced the battery with a brand new one (very carefully).
New to Android flashing but...
On attaching to PC I get HS-USB Diagnostics 9008 device. I have QFIL, QPST, firmware, firehose programmer for SDM636, etc.
I have shorted pins 3,4 internally, rebooted phone, battery in, battery out. Whatever I do it won't enter EDL mode to try reflashing.
QFIL always says - Switch to EDL Fail Failed to Switch to Emergency Download Mode.
Tried Linux with sahara, etc and phone is visable, but again no respose - can't enter EDL mode.
I have a feeling the hardware may be fried anyway
Am I doing something wrong? Any ideas? Do HMD block EDL?
I think its a lost cause...
Thanks.

Categories

Resources