Hi!
Can anyone help please? I need to use this tablet as navigation but the sd card function doesn't work. If i format it starts at 20% and stuck there and nothing happens. At restart it doesn't see the card. Maybe ROM change will solve but is there a ROM that i can flash instead this Go edition Build: V1.07_20201223?
You try to add SD-card as Adoptable Storage?
BTW: Android 10 GO is meant to run on low-end devices as the Teclast P80H is one. My guess is you'll find not any Custom ROM suitable to this device, and even not any Custom Recovery matching this device, what is an indispensable prerequisite to flash any Custom ROM.
jwoegerbauer said:
You try to add SD-card as Adoptable Storage?
BTW: Android 10 GO is meant to run on low-end devices as the Teclast P80H is one. My guess is you'll find not any Custom ROM suitable to this device, and even not any Custom Recovery matching this device, what is an indispensable prerequisite to flash any Custom ROM.
Click to expand...
Click to collapse
Yes i tried to add a card for more storage for navigation maps.
Is there at least a way to unroot the the tab?
Now i have to unlock bootloader but in fastboot it failed the command...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What can i try next?
Have you additionally installed the "Android USB Driver" suitable to this tablet what is based on MediaTek chipset? If not already done yet, do it.
jwoegerbauer said:
Have you additionally installed the "Android USB Driver" suitable to this tablet what is based on MediaTek chipset? If not already done yet, do it. I'm pretty sure then Fastboot works.
Click to expand...
Click to collapse
My device is a
Teclast P80H D9C3 Android 10 Go edition with Unisoc 7731e, so it's not MediaTek chipset, it is a Cortex Arm A-7 verified by cpu-z. Will this work anyway?
Then the product description i read misstated it.
Anyway, install the "Android USB Driver" valid for UniSoc ( formerly Spreadtrum ) devices
SPD_Driver_v1.4
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
FYI: I don't own this tablet, hence I can't guide you further. Thanks for your understanding.
Related
hey guys, i have recently purchased a used visual land connect VL879 tablet for a x-mas present for my fiancee, and i just figured i would install a new rom on the device, however, i have not been able to find any roms or much support for this device. i bought the device used so it did not have the operating system installed on it. i have put the device into recovery mode but it doesnt help much if i cant find a rom to install on the device, also i have had no luck finding a way to flash clockwork mod to the device, or a version of clockwork mod for this device. any help would be appriciated. i could use live suit, but it will not work with windows 8 which i am currently using on my laptop, if i have no other way i will go to my house and use my desktop that has win 7 . if you can help then thank you. -syntax
droid_syntax said:
hey guys, i have recently purchased a used visual land connect VL879 tablet for a x-mas present for my fiancee, and i just figured i would install a new rom on the device, however, i have not been able to find any roms or much support for this device. i bought the device used so it did not have the operating system installed on it. i have put the device into recovery mode but it doesnt help much if i cant find a rom to install on the device, also i have had no luck finding a way to flash clockwork mod to the device, or a version of clockwork mod for this device. any help would be appriciated. i could use live suit, but it will not work with windows 8 which i am currently using on my laptop, if i have no other way i will go to my house and use my desktop that has win 7 . if you can help then thank you. -syntax
Click to expand...
Click to collapse
I had attempted to post a helpful link to the latest ics rom for your device but since I'm still new here I'm not yet permitted too. So, I'll point you in the direction the best I can. Check out the forums at tabletroms dot com. Navigate to the Prestige 7 section. There you will find a thread titled "Visual Land Firmware." The roms for all visual land 7" tablets are available there.
Best of luck
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what can I do? I cant connect It to the pc, debbuging os off and I cant get the tablet tô Power on, I can only get system recovery.
The pc ser the tablet but only as unknonw.
please help me I have been trying solutions for 2 months but nothing works. I also tried to do
1 go to wipe
2 go to advanced wipe
3 select date
4 repair or change flie system
5 change flile system ext 2
6 then replace ext 4
but it does not work. when i try to boot in to the system it goes into an infinite loading screen. please HELP (I used google translator because my english sucks)
@Boyko99
Either boot-loader broken or Android system corrupted. Re-flash Stock ROM.
I don't know if my answer came to you so I'll rewrite it
jwoegerbauer said:
@Boyko99
Either boot-loader broken or Android system corrupted. Re-flash Stock ROM.
Click to expand...
Click to collapse
could you tell me how to find the Stock ROM. I need help because I'm not very practical in modding
Boyko99 said:
could you tell me how to find the Stock ROM.
Click to expand...
Click to collapse
GIYF ...
i downloaded this now what should i do? and with what program?
jwoegerbauer said:
GIYF ...
Click to expand...
Click to collapse
i downloaded this now what should i do? and with what program?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Boyko99
Because you avoided to name phone's brand/model in this thread's title you can't really get advised.
Anyway:
Assumed these requirements
got fulfilled, the USB-driver suitable to your phone is installed on PC,
then the basic steps to perform are
1) Unlock phone's boot-loader, if not done yet
2) flash the ROM
@jwoegerbauer
I can't start the phone so I don't know how to do it I'm stuck in twrp because if I try to turn it on it goes into a loop
@Boyko99
My POV:
This is the price that people who think they must improve (?) phone's Android, will say put up a better (?) ROM / Recovery than that what gets pre-installed by OEM/Carrier ( in their R&D department there are certainly no idiots sitting around ), pay.
@jwoegerbauer
i have a note 3 its the worts rom of all
Hi everyone, I have the Ulefone Armor X5 2020 version (android 10)with the mt6762 mediatek processor ( description of the seller, the ticket on the box and Ulefone description) this is very confuse why the stock rom for this device is for mt6765 and I read mt6765 with sp flash software.
My problem is what this was bricked from factory, its work unstable and rebooting ramdomly.
I try many things like factory reset, wipe the cache, (when wipe the cache the display show E: Fota installation aborted, E:: No such file or diretory) reflash the stock firmware, reflash preloader and recovery separately, but the problem persist.
And one of the first messages i read was system corrupted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help me please!!!
Aha! Same fone as mine... Now here's your problem, same as mine, quite simply, android 9 says mt6762, but an upgrade to android 10_q shows mt6765, I now have mine on 10 pro, and it shows mt6762. Now to get out of where you are, you need to grab the firmware for your fone, have adb/fastboot setup, and get ready to restore fone, the fact you can see recovery means it aint that bad... did you fix it?
Pachacouti said:
Aha! Same fone as mine... Now here's your problem, same as mine, quite simply, android 9 says mt6762, but an upgrade to android 10_q shows mt6765, I now have mine on 10 pro, and it shows mt6762. Now to get out of where you are, you need to grab the firmware for your fone, have adb/fastboot setup, and get ready to restore fone, the fact you can see recovery means it aint that bad... did you fix it?
Click to expand...
Click to collapse
Hello, thanks for answering, could you tell me the download link of the firmware that you used to be able to test and see if my phone revives please.
Hi,
Newbie here so go easy!
Ive been changing the settings on an imported chinese tablet such as boot image, remove bloatware, download apps required, etc and it works great. However, I want to be able to create a full image of one tablet and transfer that to other tablets I buy so I dont have to manually do this every time. Basically a full backup and restore of everything on the tablet.
Can anyone assist on the best process to do this.
Thanks
If device's Android got rooted then you can perform a full NANDroid backup by means of either TWRP or FlashFire. FYI: ROOT is required for mounting all partitions as RW.
TWRP:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashfire:
Full article here:
How to Backup Android Device Completely 2023 (Updated)
If you plan to unlock bootloader or want to flash custom ROM, this guide is for you. In today's article, I will show you how to Backup Android Device
www.rootingsteps.com
Hi,
Thanks for the help.
The device is rooted but im struggling to get a TWRP recovery image for this tablet as its a chinese import. However, its a Rockchip RK3288 tablet. Any help with where to find correct version?
Also when I down loaded flash fire its starts up but crashes after a few seconds?
duckett100 said:
Also when I down loaded flash fire its starts up but crashes after a few seconds?
Click to expand...
Click to collapse
Do a LOGCAT to get the reason why.
[Tutorial] How To Logcat
Here's how to use logcat: There are two main ways to do a logcat, within android, and through adb. Logcat within android can be done one of two ways, through a Logcat app: Here are two good examples are either: aLogcat or Catlog I prefer...
forum.xda-developers.com
Hi, I worked out why flash fire was crashing, but some of the items in the app are greyed out so it doesn't allow a back up. I think its because I still have the standard recovery that came with the tablet instead of something like TWRP. And I cant find one online that will work.
Are there any other ways to do a full back up programmatically?
Hello, it is me again, testing something interesting on my Ugoos AM6 device.
A Group of developers called F.K. Tech Team have been posted distributives for different Amlogic SoCs.
They have managed to run XFCE and KDE Linux builds on mentioned SoCs.
I have managed to run both of them, but for KDE I had some problems with WIFI, so XFCE is more interesting for me.
The basic process to start distributive is simple:
1. Download archive with needed build from the F.K. Tech Mirror
(I put the link for Ugoos but you can find other devices on their website)
2. Burn flash drive or EMMC flash to plug in your Amlogic device.
Here I usually use balenaEtcher app for Windows PC (can easily google it)
Interface is so simple, so you need just to choose unpacked archive from the folder you have been downloaded and choose USB drive to burn (or EMMC flash)
3. Plug in the flash drive and start your Amlogic device. Some devices start initially from your drive and some of them need to be pushed using recovery button (there is a hole in AM6's housing case for this button)
4. First run may take a time, then follow simple instructions on the screen and in the end you got your XFCE ready to rock!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However, it is common problem for such SoCs to appear here too, video acceleration has only software support. So if you would like to check 1080p videos in youtube it is better to run Android or Andrroid TV even for such powerful SoC as AMlogic S922.
Hope guys can Fix it soon. For now, particularly for Ugoos AM6 there is a bunch of Android , Android TV and DualBoot CoreElec Firmwares