Hi all
My Amazfit pace refuses to connect to my PC WIN10.
This happens after a reset, everything worked fine before.
Connecting the watch doesn't have any impact on the "Device Manager".
The watch will charge normally.
I cleaned the pin in case, tried different cables, ports, and went through this post (https://forum.xda-developers.com/t/windows-7-10-pcs-dont-detect-my-amazfit-pace.3660818/page-2) without success.
Any help will be appreciated.
Thank you
[QUOTE = "dbn4, Post: 84392135, Mitglied: 11422481"]
Hallo zusammen
Mein Amazfit-Tempo weigert sich, eine Verbindung zu meinem PC WIN10 herzustellen.
Dies geschieht nach einem Reset, alles hat vorher gut funktioniert.
Das Anschließen der Uhr hat keine Auswirkungen auf den "Geräte-Manager".
Die Uhr wird normal aufgeladen.
Jede Hilfe wird geschätzt.
Dankeschön
[/ZITAT]
Hello..Its a Problem With the Android ADB..in your System. You have to See the Deak/Unused USB Ports and Delete all of ADB...All! Then. Deinstall in Windows Anything of Android. Start The PC New. Load the Tool for that SmartWatch es Here on xda. Install the Tool, then Klipp that Watch in its Hold and into USB 2.0!!!!! And NO FRONT PORT! Oh, and NO Second Android Devices Simultane!!!
Thank you for your reply.
But how do I look the USB port and delete Android ADB?
Related
I bought a used T-mobile Pocket PC and have taken it overseas.But I can not connect to my desktop pc.(I have a usb cable,but not a cd or any proggram).how can i solve this problem,because i have to unlock it than... :?:
Just download ActvieSync from Microsoft....
It´s a free download file...
Regards
Stefan
LumpiStefan said:
Just download ActvieSync from Microsoft....
It´s a free download file...
Regards
Stefan
Click to expand...
Click to collapse
danke Stefan...
Gruss
rats
i 've downloaded activesync 3.7,but i still can not get conectted to my pc.
the problem is; pc is sending signals,but could not find ppc.
i'm getting :x .as i m trying to connecting it gives me this mess:"your device was not detected".i think i can even not download ir really.pls.pls.heeeelllppp.... :?:
rats said:
i'm getting :x .as i m trying to connecting it gives me this mess:"your device was not detected".i think i can even not download ir really.pls.pls.heeeelllppp.... :?:
Click to expand...
Click to collapse
Try a soft reset!
aao588
You are sure you used the correct usd cable for the t-mobile?
If yes, you might have unplug and plug in again to have it
connected. Once it is plug in correctly, you can see the synchronising
started. Good Luck.
Hi there, i have a prob with my Archos 101G9 ...i had granted Root Access and ran on the FW 3.2.80 without any Problems. Yesterday (even not really my day i decided to do an OTA Update to FW 4.0.4, what failed several times after downloading and confirming to install... i haven't tried to install it via PC first, but also i boot into recovery and deinstalled Customer Edition (please dont ask why, dont know it either...) end of all, connecting my G9 to PC and choosing Firmware Update in Recovery or Reformat Device in Recovery is ending in ...who guess... nothing, and i stuck in that f***g Recovery Screen.
The drive that normally appears in Windows when you tick one of those options wont appear and i have no Idea what to do now... its not cheap enough to use it as a bookstand...
All in one...to install a Custom Rom on an Android Phone is really much easier than that story, BUT... can anybody help me?
Thanks in advance and i apologize if my english sounds a bit stupid... it's not my native language
-try using another USB port and/or USB cable
-try reformatting the device in recovery (remember to plug the charger)
-in the meantime search how to root ICS (our rooting process was made for honeycomb, you will need root to install SDE again)
tapatalked from Desire
gen_scheisskopf said:
-try using another USB port and/or USB cable
-try reformatting the device in recovery (remember to plug the charger)
-in the meantime search how to root ICS (our rooting process was made for honeycomb, you will need root to install SDE again)
tapatalked from Desire
Click to expand...
Click to collapse
Ok, first thanks for fast reply...but both didnt worked...it seems like my windows is not able to recognize my device anymore...when i plugin the usb cable drive "e" and "f" appear, but i have no access to them... If i remember right, before that all the drive was named "archos"... Will try it on an older WinXP Laptop now, report later
Gesendet von meinem HTC Sensation XE with Beats Audio mit Tapatalk
PUUH... seems like i got it... that might have to do with the particular order to do things... let the device unplugged and choose Reformatt System in Recovery... dont plug USB in before "press ok to disconnect" appears... then in windows Explorer you can see the Folder "A101...", where you can put the update file in...
Second time...thanks, gonna install and root that instantly ...glad, that its not a bnookstand anymore
Hey, you are my last hope.
I bought a used galaxy s2 with a software defect, I didnt know: 1. Mistake
Now, I'm stuck in a bootloop, I can't go into the recovery, but in download mode.
So I'm not totally screwed.
But, when I'm using the jig to go into download mode, my windows 7 64 bit laptop does not recognize the phone at all. So Odin does not work.
So how can I manage to get the drivers installed completely, without the need to boot the sgs2 up...
Pls help me!
It is an international i9100 from Germany
Gesendet von meinem Sensation mit Tapatalk 2
CarlosCalderon said:
Hey, you are my last hope.
I bought a used galaxy s2 with a software defect, I didnt know: 1. Mistake
Now, I'm stuck in a bootloop, I can't go into the recovery, but in download mode.
The bootloop thread
BOOT LOOP
http://forum.xda-developers.com/showthread.php?t=1108499
But, when I'm using the jig to go into download mode, my windows 7 64 bit laptop does not recognize the phone at all. So Odin does not work.
Does that mean you have not installed KIES or the Samsung USB drivers ???
BASICS here .
FAQ
http://forum.xda-developers.com/showthread.php?t=1065995
NEW HERE
http://forum.xda-developers.com/showthread.php?t=1134290
bible
http://forum.xda-developers.com/showthread.php?t=1473577
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse
Installed kies but its not running in the background. Like it should be.
Normally, if the sgs2 is on, windows installs the drivers. But in my case,y device is only the download mode available... So it doesn't recognize my phone instead it is an unknown device...
I hope you can understand what I mean...
So I need a way to install drivers for s2 without having a bootable device...
Ideas?
Gesendet von meinem Sensation mit Tapatalk 2
You only need to install KEIS...
after opening ODIN and you phone connecting, are you getting ID:COM box highlighted yellow, and in the messege box its wriiten "added" then you got drivers and phone is recognized..
CarlosCalderon said:
Installed kies but its not running in the background. Like it should be.
Normally, if the sgs2 is on, windows installs the drivers. But in my case,y device is only the download mode available... So it doesn't recognize my phone instead it is an unknown device...
I hope you can understand what I mean...
So I need a way to install drivers for s2 without having a bootable device...
Ideas?
Gesendet von meinem Sensation mit Tapatalk 2
Click to expand...
Click to collapse
Normally, the drivers are installed during download mode. This is because download mode seems to use different serial port-like drivers. Try another PC.
Try this!
Put your phone in download mode, connect cable
Go to windows update and check for updates!
You should find the updated drivers in the optional updates
Good luck
i have a big problem because i wanted to unbrick my lg g2.
i had done it with a tut from the forum. i had nothing no download and no recovery but now i have the to things.
my pc detects my phone as lge android phone
cdc serial
and antother thing in dont know and it wont instal the drivers.
in have installet lg original driver , universal adb driver...but i dont know what to do know
my phone says firmware update but i think i cant throw it away?
i have windows 8.1 64 bit
sorry for my bad englisch iam german
Gesendet von iPhone mit Tapatalk
This driver? Install it as admin (right click and "Run as admin").
Hi.
I've got a big problem for me.
My phone was perfectly fine until yesterday, it just turned off and get a bootloop (clearing cache was helpful but not this time) so i wanted to format the data but missclicked (didnt realise that) and wiped everything. How now i can install any rom? Phone is not recognised in odin and i havent got any sdcards.
What can i do now? I need to fix it ASAP
Adb push, buy an cheap sd card, try to install the bootloader drivers of the S3.
Maybe an dead emmc
Gesendet von meinem LG-H850 mit Tapatalk
Have you tried using different USB cables and USB ports to get the recognized in Odin? I assume the phone is in download mode when you connect it to the phone.