I just got my AMAZFIT GTR 2e and have a few questions.
I was able to pair the watch with the QR barcode.
I want to set an always on displY. When I enabled it, I did it for all watchfaces. Somewhere a screen appeared stating that I can have it for 2o minutes so I enabled it (I think)
Somewhere the screen locked up and called Amazon for help. The gal said to uninstall the Zepp app which I did. I reinstalled it and paired it again. I could not find the screen that told me about Always On display for 20 minutes. I could not create it again. I don't care about the sports modes and will not use them. I only care to have the watch display the date, time and weather, stress and heart monitor.
Also I have a question about how I wear the watch. I wear it on my left wrist and the two choices on the watch had me confused. Which one do I pick. Buttons to the right or left.
When I wear the watch on my left wrist, the buttons are to the right. So I guess I would pick right.
I think I heard on a Youtube video there is a setting for screen timeout for 3o seconds. Is that correct?
If so, how do you find this setting?
Might just as well ask here:
Is there firmware version (or custom firmware) with airplane mode for GTR 2e? To the best of my knowledge GTR 2 has it...
?
Can you upload your firmware files?
Szymek Ka said:
Is there firmware version (or custom firmware) with airplane mode for GTR 2e
?
Click to expand...
Click to collapse
What's the catch with airplane mode, lower battery? Why do you need it?
Grant_N7AS said:
I think I heard on a Youtube video there is a setting for screen timeout for 3o seconds. Is that correct?
If so, how do you find this setting?
Click to expand...
Click to collapse
Yes it's true, optionally from 5s - 30s (inclusive).
You will find it in the watch - 2x top button - settings - scroll down - settings - display and brightness - automatic shutdown.
Hi, I have also a question for my gtr2e watch. When I receive a notification, my watch doest automatically unlock. It vibrates but I have to unlock it to see what I received. With my other watches like gtr and stratos3 I didn't had that problem. Does anyone know a solution?
Amalfit gtr 2e nie odświeża pogody na iPhone dopiero po włączeniu ZEEP pogoda wskakuje ,po chwili znów wywala
My GTR 2e can't find the GPS signal, can u guys help me?
ehbm said:
My GTR 2e can't find the GPS signal, can u guys help me?
Click to expand...
Click to collapse
If you change the Positioning service? You can set it in the user preferences. Try GLONASS instead of Galileo.
flekkelek said:
If you change the Positioning service? You can set it in the user preferences. Try GLONASS instead of Galileo.
Click to expand...
Click to collapse
where do i choose this option? Are you sure this is possible on the GTR 2E?
ehbm said:
where do i choose this option? Are you sure this is possible on the GTR 2E?
Click to expand...
Click to collapse
isn't it in the settings/user preferences/positioning service? You can't find it in the mobile app, only trough the watch itself.
Maybe I remember wrong, I don't have the watch anymore.
Related
Noom doesn't update when the screen is off, and i assume others will be the same. Is there any app that is able to do this?
I assume that when the screen is off, all sensors go to sleep too
jeremy.chan said:
Noom doesn't update when the screen is off, and i assume others will be the same. Is there any app that is able to do this?
I assume that when the screen is off, all sensors go to sleep too
Click to expand...
Click to collapse
I have used Runtastic Pro and Runtastic Pedometer, and both have the same issue. They have a setting to keep the screen on while running.
Have you been playing with the "Smart mode" setting, set to Sports Mode (can be found within settings). With Endomomdo, I once achieved what we are trying to accomplish, but only once: screen of, pedometer counting as expected.
Maybe trying different scenarios might get us closer to a solution?
google mytracks works
I have a US 1/8 running 5/27 firmware with OTA update. Smart Mode = Normal
My tracks seems work fine even after the screen does off. I am getting very accurate maps of my walks.
is this smart mode setting only on the newest firmware? im running the bt rom from a lil while ago and dont see the option.
Maybe
dragonfly1113 said:
is this smart mode setting only on the newest firmware? im running the bt rom from a lil while ago and dont see the option.
Click to expand...
Click to collapse
I just got my watch in late July. It came with the 5/27 firmware. I have not seen/used any other version but from what I have read here it is something new just not sure how new. I know that I am not having the issues mentioned by those who got watches early so maybe it was worth the wait.
On that note I asked for a full breakdown of the modes and what they do and got not response. Not sure anyone has it figured out yet and if omate does that have not shared that info anyplace I have found.
Hello developers,from last 5 days my amazfit touch screen not working.Its getting charging and even displays time.I tried to restart it 100 times but no use.I drained the battery and charged it 100% but still no use.Anyone please help.
Found a solution
Hi dear friend,
I also got the same issue with the watch. I found a solution to this. U can easily rectify it by unpairing the watch through phone's Amazfit app. Then watch will restart and touch will start to work. Afterwards if any updates for watch is available u can update.
Try this....
If already u have rectified the problem, tell me how and please share it. It will be useful for other users.
I try unpaired watch but touch not work,
bsvinod said:
Hi dear friend,
I also got the same issue with the watch. I found a solution to this. U can easily rectify it by unpairing the watch through phone's Amazfit app. Then watch will restart and touch will start to work. Afterwards if any updates for watch is available u can update.
Try this....
If already u have rectified the problem, tell me how and please share it. It will be useful for other users.
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ya it's work thanks bro its Diwali biggest gift thank you again
I have the same problem, but even after I did the unpairing, it still doesn't work, and the battery drains within a day. Now I cannot even pair the watch with my phone (Mi6) as the screen does not react to touch.
Please, help!
hajduk78 said:
I have the same problem, but even after I did the unpairing, it still doesn't work, and the battery drains within a day. Now I cannot even pair the watch with my phone (Mi6) as the screen does not react to touch.
Please, help!
Click to expand...
Click to collapse
What is the watch model and firmware? Did you try to flash any ROM or it's still stock?
Still no response
Dear bsvinod, i have done the same thing which you have said,but no use the display touch not working,its getting charged and shows the display but touch not working please help i really love this watch.
yunussalman said:
Dear bsvinod, i have done the same thing which you have said,but no use the display touch not working,its getting charged and shows the display but touch not working please help i really love this watch.
Click to expand...
Click to collapse
What is the watch model and firmware? Did you try to flash any ROM or it's still stock? ][
watch model
lfom said:
What is the watch model and firmware? Did you try to flash any ROM or it's still stock? ][
Click to expand...
Click to collapse
the watch model is A1612 i dont have any idea about firmware as it is english version and i last updated it in september 2017 from then its display doesnt work.No,i haven't tried to flash its still stock.
Thanks in advance
yunussalman said:
the watch model is A1612 i dont have any idea about firmware as it is english version and i last updated it in september 2017 from then its display doesnt work.
Thanks in advance
Click to expand...
Click to collapse
So it's still stock... Does it connect to Amazfit app on phone? If yes, have you tried to upair the watch while it's connected and pair again? If yes again, I am sorry but most probably it's a hardware issue.
No at present i have unpaired it.
lfom said:
So it's still stock... Does it connect to Amazfit app on phone? If yes, have you tried to upair the watch while it's connected and pair again? If yes again, I am sorry but most probably it's a hardware issue.
Click to expand...
Click to collapse
at present i have unpaired it but while i iam trying to pair it,its needed the QR code for which the watch doesnt connecting.
yunussalman said:
at present i have unpaired it but while i iam trying to pair it,its needed the QR code for which the watch doesnt connecting.
Click to expand...
Click to collapse
Try with another Amazfit app version, another account, and another phone. If all fail, then again, probably it's due to a hardware failure.
I Tried with other phones and other apps
lfom said:
Try with another Amazfit app version, another account, and another phone. If all fail, then again, probably it's due to a hardware failure.
Click to expand...
Click to collapse
Dear friend,
i have tried with other phones and other apps but the watch doesnt show QR code to connect.
can i try to flash or factory reset my mobile by connecting it to pc?
is their any method to do it?
before the watch display stops responding i had installed custom watch faces into watch and after one week the watch's display stopped responding.
It gets charging its displaying only the current watch face but touch not responding.
I also have the same problem. Touch screen is not working. Pace 2.6.2.0. Pace is normally charging, no flickering on the screen. I have unpaired it with the phone, but no possibility to pair it again since I can't tell to confirm pairing number.
Poslano sa mog MI 6 koristeći Tapatalk
yunussalman said:
Dear friend,
i have tried with other phones and other apps but the watch doesnt show QR code to connect.
can i try to flash or factory reset my mobile by connecting it to pc?
is their any method to do it?
before the watch display stops responding i had installed custom watch faces into watch and after one week the watch's display stopped responding.
It gets charging its displaying only the current watch face but touch not responding.
Click to expand...
Click to collapse
Use the phone with Amazfit that is currently paired with the watch to unpair it, keep both close and connected to each other so when you unpair all data on watch will be erased.
Or try this:
https://github.com/MajeurAndroid/Adb-Remote-Screen
Dear friends,
As my problem not resolved i went to mi showroom in hyderabad to get repaired as i entered and switched on my watch the touch got response and i increased my brightness and after 10 sec it again not responding i showed to them they said they dont know how to do.
One of other repair person said its clearly an software problem.After i came to room it again started responding but after few seconds it again stops.so can you please guide me how to factorh reset my amazfit pace english version watch?
Or help me to flash rom as mine is stock rom...please help
yunussalman said:
Dear friends,
As my problem not resolved i went to mi showroom in hyderabad to get repaired as i entered and switched on my watch the touch got response and i increased my brightness and after 10 sec it again not responding i showed to them they said they dont know how to do.
One of other repair person said its clearly an software problem.After i came to room it again started responding but after few seconds it again stops.so can you please guide me how to factorh reset my amazfit pace english version watch?
Or help me to flash rom as mine is stock rom...please help
Click to expand...
Click to collapse
If it's paired with phone, go to Amazfit app -> My Watches -> More and tap on Unpair (it will erase all data on watch).
Or use the remote control app to go to Settings -> Device and choose factory reset. But I thought you had already done this (factory reset)...
Dear developers,
i have tried everything and at last my watch has been working its been updated 4 times and at present the version is 2.8.0.5
previously it was 1.2.6.0 or something.....its been working but sometimes the touch is not working,if i left it aside and after 10 to 15 minutes or after i restart it then it will work.
can you guys help me for this?
we can say that screen is flickering(making small quick moments).
please help
Anyone please help....iam a fitness freak and i badly need it to get repaired
Amazfit screen not showing anything
Hello, I'm writing hoping someone can help me.
My pace it's broken or so it seems, like it is turned on but not showing anything on screen. In first it seemed dead but was connected to my phone and counting steps but nothing on screen.
When receiving notifications it was vibrating as usual but again nothing on screen.
If I turn it off it shows battery charging, when I turn is on shows Amazfit logo but after screen shutsdown and nothing appears.
I have it unpaired now and can't pair again...
I have unlocked boatloader and reflashed latest us tomorrow but... Same behavior, did this appened to someone, or can someone help?
Thank you
lfom said:
Use the phone with Amazfit that is currently paired with the watch to unpair it, keep both close and connected to each other so when you unpair all data on watch will be erased.
Or try this:
https://github.com/MajeurAndroid/Adb-Remote-Screen
Click to expand...
Click to collapse
hi , anyone had any sucess with this app? the remote screen . ? i cant get it to work and also have the same problem with the stratos touchscreen , but half of the right side does not work
My Stratos 3 is currently running 4.2.2.0 firmware.
Today Amazfit app has notified me a new firmware available: 4.2.2.1, but when I choose to upgrade, the watch looks for latest version and says it's on the latest.
Is there any way to force the discovery? I'm currently facing problems to sync sport activities between the watch and the Amazfit App and I'd like to test the new firmware to see it solves those problems.
factory reset, it worked for me
Johny70 said:
factory reset, it worked for me
Click to expand...
Click to collapse
Hi Johny, did you do anything else? I have done already like 10 factory resets, and the only thing I get after the incredibly fast firmware download is "Coudn't download updates, try again", and if try again, "Current version is up to date", once and once again
I'm losing my nerves with this watch, it works really bad
I'm in the same problem... I did 3 favtiry resets without any result. After a factory reset wath download firmware but appears a download error and stops... My watch version is A1929.
Another stranger thing is inthe amazfit app apeears a message to download the lastest version everytime.:crying:
Make sure watch can connect to Wi-Fi properly, otherwise it won't download the update. You can connect it in the settings on watch (of course).
Thanks for your reply.
The download finishes to 100% but when it try to install appear the download fail message... The wifi connection is on, and it seems to download all the firmware.
It can be a servet fail or similar. But it download to the 100%, I don't understand... I try 4 times factory reset and delete amazfit app to in mobile with same result.
If you know how to use adb, you can try this:
1. Connect the watch to the computer using USB
2. Make sure you have a file named "update.zip" on watch's internal storage after it reaches 100% downloading
3. Check if adb is working with:
Code:
adb devices
4. If it does, try to start the update with this other command:
Code:
adb reboot update
It was very very weird.
When I was at home, my watch always told me it was on the latest version, but when I tried again far from home, it detected the new version (but I didn't have a Wifi around to download).
I then used my mobile Wifi tethering but I received an error on OTAUpdate module.
I did a Factory reset and I downloaded and installed it perfectly.
Really weird indeed... I was able to update also by tethering, wifi at home or office didn't work, so thanks for your help
Hi.
Finally I can update, I explain the steps I have done.
1-factory reset
2-pair the phone with amazfit app.
3- select the update in the amazfit app ( not the stratos, because if you select in ther fails)
4- put password wifi and update.
The most extrange thing is because the same steps I done 6 or 7 times before, with the same wifi connection.
Luck!
no need in factory reset, there was a bad file pushed to the OTA. it was replaced, everything should work out of the box.
I'm still not able to update but that looks like different issue.
When I try to enter wifi password in Amazfit app, press tick mark on keyboard it does nothing. On phone keyboard closing, window to enter password still there with password entered (no ok or other button) and Stratos 3 still waiting for password.
Maybe that is some incompatibility with Android 10 in Nokia 8.1?
Same issue.. Disappointed with this watch
Same issue here. The updated worked for 4.2.2.0 after many attempts but not the 4.2.2.1. I tried using the watch directly or the app.
Also, the watch quality is poor. GPS doesn't work properly for running even if trying different GPS combinations (GLONASS, GALILEU,)
I had the Amazfit Pace and it was great comparing with this one.. Really disappointed.
Really, so it suffers the same flaw as GTR/GTS? Another Huami failure?
lfom said:
Really, so it suffers the same flaw as GTR/GTS? Another Huami failure?
Click to expand...
Click to collapse
Yes.. Just saw other pages about GTR / GTS. Exactly the same.
It takes a long time to get signal and I even had a run of app. 7 km that the watch recognized as about 13 km.
Doesn't seem like an easy and quick fix either..
I'm about to action the warranty..
leugim1 said:
Yes.. Just saw other pages about GTR / GTS. Exactly the same.
It takes a long time to get signal and I even had a run of app. 7 km that the watch recognized as about 13 km.
Doesn't seem like an easy and quick fix either..
I'm about to action the warranty..
Click to expand...
Click to collapse
just got mine i can definitly say there's nothing to do with GTR (sent it back)... accruacy is very good on this watch.
winni21 said:
just got mine i can definitly say there's nothing to do with GTR (sent it back)... accruacy is very good on this watch.
Click to expand...
Click to collapse
What is the firmware version you have running?
How many times did you try?
I'm 4.2.2.1 got it upgrade first time I boot.
Tried 2 or 3 times accuracy is good. GPS+Galileo (I'm french)
But I'm facing some bugs (due to early fw) the time of my workout it 1 hour sooner in amazfit app (if I do it at 15h00 it's displayed at 14h in amazfit app) in the watch it's ok.
I had also to disable "workout synced notification" because it was never stopping to send notification)
Last think I've noticed some notification are double sent: ex Gmail
But has I said the watch was first only in English French language came with latest fw. Some of you have those bugs?
winni21 said:
I'm 4.2.2.1 got it upgrade first time I boot.
Tried 2 or 3 times accuracy is good. GPS+Galileo (I'm french)
But I'm facing some bugs (due to early fw) the time of my workout it 1 hour sooner in amazfit app (if I do it at 15h00 it's displayed at 14h in amazfit app) in the watch it's ok.
I had also to disable "workout synced notification" because it was never stopping to send notification)
Last think I've noticed some notification are double sent: ex Gmail
But has I said the watch was first only in English French language came with latest fw. Some of you have those bugs?
Click to expand...
Click to collapse
Yes, working good, but same bugs (French too)
- Receiving notifications twice
- Sync notification cannot stop
Good to know!
For those who want a view of GPS tracking, here is a screenshot:
https://photos.app.goo.gl/cb72otiBWY5XsrLSA
Hi,
just got new firmware today
Some Workout optimisation for Ultra mode, notification optimisation, bug fixes.....
lets see how it works
I've updated yesterday - everything's fine. Seems they've also changed the calorie count function - it appears it's also counting calories burnt during normal activities, not only sport.
hi
unfortunately i'm not able to update. it shows me checking for updates .... and nothing i've tried serval times, factory reset, i've change phone, settings on access point to autochanel, not able to connect watch with wifi at all... MODEL A1929 ROM 4.2.2.1
Hello, exactly the same problems and the same configuration (MODEL A1929 ROM 4.2.2.1 - Living in France)
careful with update
winni21 said:
Hi,
just got new firmware today
Some Workout optimisation for Ultra mode, notification optimisation, bug fixes.....
lets see how it works
Click to expand...
Click to collapse
Already updated. Has an issue at least pairing activities. I have a run of 11 km that show up correctly in the watch but in the app Amazfit and Strava is only 8 km... I know it was 11 km also.
Problems continue..
Fw 4.2.4.0 out
Juste got update today
Many more improvement and new watch faces.
leugim1 said:
Already updated. Has an issue at least pairing activities. I have a run of 11 km that show up correctly in the watch but in the app Amazfit and Strava is only 8 km... I know it was 11 km also.
Problems continue..
Click to expand...
Click to collapse
gps issues? I thought stratos 3 had good gps
Non gps issue for stratos 3 all is ok
iseeka said:
gps issues? I thought stratos 3 had good gps
Click to expand...
Click to collapse
The GPS accuracy has significantly improved after the last 2 updates. At the moment GPS is very accurate and fast to capture signal.
However, the watch still has many firmware issues. For example, at the moment after a lap is counted during a race, the rest of the race is all messed up (not fully counted in the app although all good in the watch, the KM pace is 0:00, etc.)
I was expecting the watch would be only launch once a stable system was in place and after owning it for months I feel we are doing the software development tests ourselves...
This was very disappointing. I had the Amazfit Pace 1 and was really happy about it but cannot recommend this watch.
leugim1 said:
The GPS accuracy has significantly improved after the last 2 updates. At the moment GPS is very accurate and fast to capture signal.
However, the watch still has many firmware issues. For example, at the moment after a lap is counted during a race, the rest of the race is all messed up (not fully counted in the app although all good in the watch, the KM pace is 0:00, etc.)
I was expecting the watch would be only launch once a stable system was in place and after owning it for months I feel we are doing the software development tests ourselves...
This was very disappointing. I had the Amazfit Pace 1 and was really happy about it but cannot recommend this watch.
Click to expand...
Click to collapse
i also see this kind of bug all is ok on the watch but in amazfit app shows different things... i'm not sure it only concern Stratos 3. Amazfit App needs to be improved.
Anyone got amazmod or watchdroid working installed them but they don't show up on the watch anywhere
ROZATOM said:
hi
unfortunately i'm not able to update. it shows me checking for updates .... and nothing i've tried serval times, factory reset, i've change phone, settings on access point to autochanel, not able to connect watch with wifi at all... MODEL A1929 ROM 4.2.2.1
Click to expand...
Click to collapse
>>> 4.2.6.0 Fix the Wifi problems !!!
hi, i have some problems with the stratos 3.
1. in ultra mode I only have a black screen, although pulse measurement lights up green. the latest firmware is on it and I have already reset the watch.
2. When jogging, the pulse measurement initially shows values that are much too high.
3. The update of the training load and vo2 max is always in the app only at 00:00.
Amazfit support no longer responds to inquiries
I am very frustrated with the watch
Lichter100 said:
1. in ultra mode I only have a black screen, although pulse measurement lights up green. the latest firmware is on it and I have already reset the watch.
Click to expand...
Click to collapse
Try this in your PC:
Code:
adb shell check_mcu_res_upgrade.sh
Saratoga79 said:
Try this in your PC:
Code:
adb shell check_mcu_res_upgrade.sh
Click to expand...
Click to collapse
it does not help. still black screen after switching to ultra mode
Lichter100 said:
it does not help. still black screen after switching to ultra mode
Click to expand...
Click to collapse
Look for the thread about Stratos 3 US firmware installer, in the post of 4.2.4.0 version there is a trick to update/fix Ultra Mode resources (MCU resources).
https://forum.xda-developers.com/showpost.php?p=81489033&postcount=8
Saratoga79 said:
Look for the thread about Stratos 3 US firmware installer, in the post of 4.2.4.0 version there is a trick to update/fix Ultra Mode resources (MCU resources).
https://forum.xda-developers.com/showpost.php?p=81489033&postcount=8
Click to expand...
Click to collapse
Hi, thank you for your work, but the watch is not found in ultra mode
try using the standard watchface before switching to ultra mode
Wesleyblanco said:
try using the standard watchface before switching to ultra mode
Click to expand...
Click to collapse
i have the standard watchface "quiet time" and a black screen in ultra mode
Lichter100 said:
Hi, thank you for your work, but the watch is not found in ultra mode
Click to expand...
Click to collapse
Both procedures I told you have to be done in Smart/Normal mode as you need adb working on your watch, and in Ultra mode adb doesn't work.
Hello all,
I am new at running and looking to get a sports watch to track my runs along with little smart features like showing notifications and controlling music from my phone.
I have short listed two watches according to my needs. Amazfit Stratos 3, price 299 SGD or Garmin Vivoactive 3 element, price 267 SGD.
I need accurate GPS and HR along with less buggy software on watch and app.
Need help in deciding one of these two.
Garmin works well and reliable GPS is a must.
Amazfit (I have a first Stratos) is always in developpement mode, GPS not really reliable (not bad but not reliable), HRM really bad, tracking features not very well, connected features almost the baddest possible.... Otherwise it is an usable watch
Saratoga79 said:
Both procedures I told you have to be done in Smart/Normal mode as you need adb working on your watch, and in Ultra mode adb doesn't work.
Click to expand...
Click to collapse
Hello, unfortunately that doesn't work either, still black screen
Hi, I need to change my Stratos 3 from Chinese to the International version but I can't find it here. Can you please help? Thanks a lot.
I have same problem for a while now. Watch is recognized in the app but screen on watch is blank. No one still have solution for this?
Crazy gone display
My time is going crazy after few minutes of workout... Anyone else? Cannot Complete any workout.
golic.uros said:
My time is going crazy after few minutes of workout... Anyone else? Cannot Complete any workout.
Click to expand...
Click to collapse
If it is with latest firmware 4.2.6.0 it's normal everyone is facing this.
Roll back to 4.2.5.0
After starting the ultra mode my stratos 3 does not show any sensor readings when entering the smartmode again.
firmware: 4.2.8.0
Tried reboot, reset, wiping with adb. Using different watch face, starting ultra again, switching back to smart... (several times) nothing helps.
When using hart rate function in smart mode, led flashing for a while, then stops, no reading.
No steps reading no gps reading.
Watch worked fine for 18 months before I used the ultra mode once (forgot my charger on vacation...)
Somebody any idea....?