For some reason power + volume up doesn't take me to recovery mode. I'm assuming this happened after the last system update.
Is there a way to bring it back?
Thanks.
Had the same Problem...
Try connecting the tab to your PC and try again. For me that did the trick.
Seems to be a bug in A11...
chuckbert said:
Had the same Problem...
Try connecting the tab to your PC and try again. For me that did the trick.
Seems to be a bug in A11...
Click to expand...
Click to collapse
It worked. Thank you!
Related
Few weeks old I9300.
I'm unable to get to download mode using the three button method (have tired many other combos).
I have attached a picture of what happens when I press Vol Down + Home + Power. (Didn't know how to insert into the post.
Any help is appreciated.
konphused said:
Few weeks old I9300.
I'm unable to get to download mode using the three button method (have tired many other combos).
I have attached a picture of what happens when I press Vol Down + Home + Power. (Didn't know how to insert into the post.
Any help is appreciated.
Click to expand...
Click to collapse
a little suggestion here:
try factory reset ur S3...
if the problem still persist try to reflash ur firmware using samsungkies
Maybe you try this one. Connect this to your phone and it will go into download mode automatically. If it does not work, then your phone may have bricked.
http://item.taobao.com/item.htm?spm=a1z10.3.0.68.VrjHcb&id=9424207036&
evantkh said:
Maybe you try this one. Connect this to your phone and it will go into download mode automatically. If it does not work, then your phone may have bricked.
http://item.taobao.com/item.htm?spm=a1z10.3.0.68.VrjHcb&id=9424207036&
Click to expand...
Click to collapse
or u can make it urself..look here Click
jeffreydesiree said:
or u can make it urself..look here Click
Click to expand...
Click to collapse
I think the only difference is buying the USB Jig directly or buying the resistance to make it
Hello all,
I was using my phone, checking emails and making phone calls just fine. Then I got home and went to the computer to do some work. I noticed that my phone was showing the Galaxy S3 logo. I though weird. So I removed the battery, put it back in but still the same thing. I though maybe it was broken so I though a factory reset would be a good idea. BUT, I can't go to Recovery. When I try to go to Download mode, it opens up the interface where it says "Volume up" to go to Download mode or "Volume Down" to reboot your phone. Even when I press the Volume Up button, the phone restarts. So basically, my phone has gone full retarded and I can't do anything, no Recovery or no Download mode.
Anyone knows anything?
Thin_Bezel said:
Hello all,
I was using my phone, checking emails and making phone calls just fine. Then I got home and went to the computer to do some work. I noticed that my phone was showing the Galaxy S3 logo. I though weird. So I removed the battery, put it back in but still the same thing. I though maybe it was broken so I though a factory reset would be a good idea. BUT, I can't go to Recovery. When I try to go to Download mode, it opens up the interface where it says "Volume up" to go to Download mode or "Volume Down" to reboot your phone. Even when I press the Volume Up button, the phone restarts. So basically, my phone has gone full retarded and I can't do anything, no Recovery or no Download mode.
Anyone knows anything?
Click to expand...
Click to collapse
Doesn't look good but have you tried adb to recovery.
tallman43 said:
Doesn't look good but have you tried adb to recovery.
Click to expand...
Click to collapse
Yes, It doesn't work. I even tried holding Vol Up + Home + Power buttons for 10 minutes hoping the phone would go to Recovery. It doesn't even want to go to Download. It shows the Download menu but when I click the Volume Up button, it simply reboots the phone. And it was working fine before it happened.
Thin_Bezel said:
Yes, It doesn't work. I even tried holding Vol Up + Home + Power buttons for 10 minutes hoping the phone would go to Recovery. It doesn't even want to go to Download. It shows the Download menu but when I click the Volume Up button, it simply reboots the phone. And it was working fine before it happened.
Click to expand...
Click to collapse
I thought it might not work but was worth a try...It sounds like either corrupt partitions or emmc chip corrupt/damage but all the solutions I know of need you to at least get into download mode and if adb is not working as well then the only thing I can suggest is service repair.
This is the situation I would hope not to find myself in maybe somebody else as some suggestions but sorry it's not looking good.
tallman43 said:
I thought it might not work but was worth a try...It sounds like either corrupt partitions or emmc chip corrupt/damage but all the solutions I know of need you to at least get into download mode and if adb is not working as well then the only thing I can suggest is service repair.
This is the situation I would hope not to find myself in maybe somebody else as some suggestions but sorry it's not looking good.
Click to expand...
Click to collapse
This honestly sucks. I have been using my Galaxy S3 for two years without any problems. It was my main device for everything. Maybe because I have used it for 2 years without rest for work has caused a chip failure.
Ok. I tried rooting Honor 7 earlier today. I did every step, but in the last step when I installed the SuperSU trough the TWRP, I noticed a big problem.
When I rebooted the phone, it just went into the chinese TWRP. Tried everything, only goes into TWRP. Any help?
My phone model is PLK-L01.
try follow this tutorial.
http://forum.xda-developers.com/honor-7/general/honor-7-button-combinations-clarified-t3320467
Connected to a computer:
Volume up + Power on: Huawei eRecovery (reboot / download / shutdown options - used for 'recovery loop' fix, see below)
hope it will solved your problem..
lockmunk said:
try follow this tutorial.
http://forum.xda-developers.com/honor-7/general/honor-7-button-combinations-clarified-t3320467
Connected to a computer:
Volume up + Power on: Huawei eRecovery (reboot / download / shutdown options - used for 'recovery loop' fix, see below)
hope it will solved your problem..
Click to expand...
Click to collapse
Nope. Volume up + power on only boots to TWRP
I tried downloading stock roms and instaling them trought TWRP, one rom was corrupted and another did not work, it still booted to TWRP. I found some other roms but they must be downloaded from mega.nz, which does not work on my computer
Jonni1 said:
Nope. Volume up + power on only boots to TWRP
Click to expand...
Click to collapse
connect with usb cable?
lockmunk said:
connect with usb cable?
Click to expand...
Click to collapse
The phone was connected to computer with usb cable (the computer did not regocnize it though).
Any quick help? I need my phone for the weekend...I would appreciate a lot if someone could help!
Jonni1 said:
Nope. Volume up + power on only boots to TWRP
Click to expand...
Click to collapse
Jonni1 said:
Any quick help? I need my phone for the weekend...I would appreciate a lot if someone could help!
Click to expand...
Click to collapse
you should read carefully the link given to you previously and you should be able to solve it yourself.
lockmunk said:
you should read carefully the link given to you previously and you should be able to solve it yourself.
Click to expand...
Click to collapse
Ok, this is what I did:
-Connect the phone to windows computer
-Go to TWRP, select reboot and system
-Try does the phone recognize the computer by using volume down + power. Worked.
-Try volume up + power on on boot (the phone goes black after a moment, vibrates and goes back to the white Honor text)
Does not work.
Omg guys thank you so much, it worked by pressing only the volume up button, thank you guys sooo much thank you i love you!!!
Hi, guys
Flashed the unofficial Lineage 14.1 and by mistake SuperSUClassic for 6.0. Now it is bricked
No bootloader, just 2 buzzes after 10 sec when you pressing the power button.
Are there any means to restore the boot record?
Try to keep Vol Up and press Power button to go to recovery. Or if not, at least into Fastboot with Vol Down and Power. Once you are in TWRP, you know what to do.
valy_cta said:
Try to keep Vol Up and press Power button to go to recovery. Or if not, at least into Fastboot with Vol Down and Power. Once you are in TWRP, you know what to do.
Click to expand...
Click to collapse
Tried that - no luck.
Will try again...
pgavril said:
Tried that - no luck.
Will try again...
Click to expand...
Click to collapse
What about battery, was it above 50% at least?
Edit: Try also https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
valy_cta said:
What about battery, was it above 50% at least?
Edit: Try also https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Click to expand...
Click to collapse
Thanks
definitely will try that
You cant brick a qualcomm device. Like said above, just put the CPU in qdloader mode. It will flash directly to the nand memory.
Started flashing , but accidentally USB cable got disconnected - now can't quit the QFL mode, probably bricked it finally, Still waiting for the battery to discharge
pgavril said:
Started flashing , but accidentally USB cable got disconnected - now can't quit the QFL mode, probably bricked it finally, Still waiting for the battery to discharge
Click to expand...
Click to collapse
Have you kept the Power button pressed for about 1 minute to exit this mode?
If the above doesn't work, why don't you flash it again? Still your into the QFL mode.
valy_cta said:
Have you kept the Power button pressed for about 1 minute to exit this mode?
If the above doesn't work, why don't you flash it again? Still your into the QFL mode.
Click to expand...
Click to collapse
Power button does not respond, device manager shows QFD device,
Flash says 7:31:24: {ERROR: OpenPort:4197 It took 10.01500000 seconds to open port. Which is longer than 3.000. This indicates your target is not stable
..
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
Hello I want to factory reset my s22 plus because of battery draining fast
I've tried powering off then powering on holding the side key and volume up, letting go upon the samsung logo and knox coming up.
And also tried to plug the phone on PC via cable and do the method above.
Power off...press and hold power and volume up until you see Samsung logo then let go of both buttons
Or just go to settings the Generl Management...look for reset and do it from there
butchieboy said:
Power off...press and hold power and volume up until you see Samsung logo then let go of both buttons
Click to expand...
Click to collapse
That's what I did.
butchieboy said:
Or just go to settings the Generl Management...look for reset and do it from there
Click to expand...
Click to collapse
I want to wipe cache too
Iliass95 said:
That's what I did.
Click to expand...
Click to collapse
Then you are probably holding buttons to long. Works just fine for me
butchieboy said:
Then you are probably holding buttons to long. Works just fine for me
Click to expand...
Click to collapse
I've tried now to plug the phone to PC and finally worked for me.
Iliass95 said:
I've tried now to plug the phone to PC and finally worked for me.
Click to expand...
Click to collapse
Yeah now you have to plug it into a pc before you can boot into recovery. once you do this you can also use adb reboot recovery if you have adb installed etc