Honor 7 doesn't go to Android anymore - Honor 7 Q&A, Help & Troubleshooting

Ok. I tried rooting Honor 7 earlier today. I did every step, but in the last step when I installed the SuperSU trough the TWRP, I noticed a big problem.
When I rebooted the phone, it just went into the chinese TWRP. Tried everything, only goes into TWRP. Any help?
My phone model is PLK-L01.

try follow this tutorial.
http://forum.xda-developers.com/honor-7/general/honor-7-button-combinations-clarified-t3320467
Connected to a computer:
Volume up + Power on: Huawei eRecovery (reboot / download / shutdown options - used for 'recovery loop' fix, see below)
hope it will solved your problem..

lockmunk said:
try follow this tutorial.
http://forum.xda-developers.com/honor-7/general/honor-7-button-combinations-clarified-t3320467
Connected to a computer:
Volume up + Power on: Huawei eRecovery (reboot / download / shutdown options - used for 'recovery loop' fix, see below)
hope it will solved your problem..
Click to expand...
Click to collapse
Nope. Volume up + power on only boots to TWRP

I tried downloading stock roms and instaling them trought TWRP, one rom was corrupted and another did not work, it still booted to TWRP. I found some other roms but they must be downloaded from mega.nz, which does not work on my computer

Jonni1 said:
Nope. Volume up + power on only boots to TWRP
Click to expand...
Click to collapse
connect with usb cable?

lockmunk said:
connect with usb cable?
Click to expand...
Click to collapse
The phone was connected to computer with usb cable (the computer did not regocnize it though).

Any quick help? I need my phone for the weekend...I would appreciate a lot if someone could help!

Jonni1 said:
Nope. Volume up + power on only boots to TWRP
Click to expand...
Click to collapse
Jonni1 said:
Any quick help? I need my phone for the weekend...I would appreciate a lot if someone could help!
Click to expand...
Click to collapse
you should read carefully the link given to you previously and you should be able to solve it yourself.

lockmunk said:
you should read carefully the link given to you previously and you should be able to solve it yourself.
Click to expand...
Click to collapse
Ok, this is what I did:
-Connect the phone to windows computer
-Go to TWRP, select reboot and system
-Try does the phone recognize the computer by using volume down + power. Worked.
-Try volume up + power on on boot (the phone goes black after a moment, vibrates and goes back to the white Honor text)
Does not work.

Omg guys thank you so much, it worked by pressing only the volume up button, thank you guys sooo much thank you i love you!!!

Related

Can't get into flash mode?

Searched and researched. All says old Volume - and then plug in device and it will enter flash mode.
But I get nothing. Nothing happens at all.
I already have Flash 0.911 installed and I started flash64.exe and pressed flash.
Waited for flash pop up appear and tell me to unplug, turn off device and press back button (in this case Volume -) and plug device to PC.
The flash pop window still there and nothing happens at all.
Please advise.
hsiaolc said:
Searched and researched. All says old Volume - and then plug in device and it will enter flash mode.
But I get nothing. Nothing happens at all.
I already have Flash 0.911 installed and I started flash64.exe and pressed flash.
Waited for flash pop up appear and tell me to unplug, turn off device and press back button (in this case Volume -) and plug device to PC.
The flash pop window still there and nothing happens at all.
Please advise.
Click to expand...
Click to collapse
Did you install the drivers included in flashtool?
Sent from my C5303 using Tapatalk 4
hsiaolc said:
Searched and researched. All says old Volume - and then plug in device and it will enter flash mode.
But I get nothing. Nothing happens at all.
I already have Flash 0.911 installed and I started flash64.exe and pressed flash.
Waited for flash pop up appear and tell me to unplug, turn off device and press back button (in this case Volume -) and plug device to PC.
The flash pop window still there and nothing happens at all.
Please advise.
Click to expand...
Click to collapse
Have you tried following the instructions from Sony, here :http://developer.sonymobile.com/services/flash-tool/.
This may also be useful : http://forum.xda-developers.com/showthread.php?t=2287881.
Worked for me. There's also info on which volume button presses do what.
Please do a bit more searching before posting questions. I found all the information I needed in these forums and on the Sony Developer site
GretaLewd said:
Have you tried following the instructions from Sony, here :http://developer.sonymobile.com/services/flash-tool/.
This may also be useful : http://forum.xda-developers.com/showthread.php?t=2287881.
Worked for me. There's also info on which volume button presses do what.
Please do a bit more searching before posting questions. I found all the information I needed in these forums and on the Sony Developer site
Click to expand...
Click to collapse
Thank you.
I have read the threads and links and still can't find the solution to my problem.
I press volume down and plug in and then Flash tools says I need to install the drivers.
But I've installed the drivers so many times.
I don't understand what's making it to fail and make flash to abort.
Please help.
hsiaolc said:
I have read the threads and links and still can't find the solution to my problem.
I press volume down and plug in and then Flash tools says I need to install the drivers.
But I've installed the drivers so many times.
I don't understand what's making it to fail and make flash to abort.
Please help.
Click to expand...
Click to collapse
Don't know if this will help, but have you tried installing the ADB drivers? Follow the links in the table here: http://developer.sonymobile.com/downloads/drivers/ for you device (311, 312 = WiFi only).
Also (sorry if this is a dumb question) you are connecting/pressing volume key with the tablet powered off?
Try To power off your device, and while still shutting down, with USB cable connected, press VOLUME -
Sent from my SGP321 using xda app-developers app
No not a dumb question. I have the tablet off at all times before pressing volume and then reconnect the tablet.
worf_1977 said:
Try To power off your device, and while still shutting down, with USB cable connected, press VOLUME -
Sent from my SGP321 using xda app-developers app
Click to expand...
Click to collapse
Tried that. Still says Error flashing Aborted. Drivers needed to be installed for connected device.
windows 8 ? Try Pda.net drivers
If it doesn't work u should post a screen or a log to see exactly what's wrong.
Hey ,, i have xperia sp and the same problem with me .. but i installed (flashtool-0.9.15.0) and then installed the suitable drivers .. it works perfectly .. try it ..
at the first time .. it didn't work .. but in the second .. it flashes ..
m_khaldoun said:
Hey ,, i have xperia sp and the same problem with me .. but i installed (flashtool-0.9.15.0) and then installed the suitable drivers .. it works perfectly .. try it ..
at the first time .. it didn't work .. but in the second .. it flashes ..
Click to expand...
Click to collapse
whats mean suitable driver ?
luci morningstar said:
whats mean suitable driver ?
Click to expand...
Click to collapse
Flashtool-drivers.exe inside flashtool folder "drivers".
The only way I got my Z4 Tablet into Flashmode was by using the suggestion on the first page. plug it in, while its turning off hold down the volume button, only then did the LED go full green and flashtool started flashing. Strangely the normal instructions to get into flashmode, holding volume down while plugging in USB cable while OFF, did not work. This does.

[Q] s3 BOOT STUCK, no recovery

Hi there, I was on MIUI, decided to flash a new rom.
Phone fails to boot, stuck on MIUI boot.
Don't think the phone has any recovery, cannot enter recovery mode.
When plugged into computer, it disconnects/connects every 20-30 seconds, cannot see memory card in mycomputer
No idea what to do??
iamlegendfam said:
Hi there, I was on MIUI, decided to flash a new rom.
Phone fails to boot, stuck on MIUI boot.
Don't think the phone has any recovery, cannot enter recovery mode.
When plugged into computer, it disconnects/connects every 20-30 seconds, cannot see memory card in mycomputer
No idea what to do??
Click to expand...
Click to collapse
factory reset from recovery. by the way is the rom based on 4.1.1 or later?
sriram231092 said:
factory reset from recovery. by the way is the rom based on 4.1.1 or later?
Click to expand...
Click to collapse
Can't get into recovery! (is that when you hold power and volume on boot) if so, cannot get into rocovery.
And higher I believe
iamlegendfam said:
Can't get into recovery! (is that when you hold power and volume on boot) if so, cannot get into rovery.
And higher I believe
Click to expand...
Click to collapse
volume up+ home+ power is the combo to get into rec mode. can't get into it with this combo?
sriram231092 said:
volume up+ home+ power is the combo to get into rec mode. can't get into it with this combo?
Click to expand...
Click to collapse
Ah right, yes tried that and I'm into recovery... It says downloading, but not sure where from or if it is doing anything?
Edit, just seen maybe I have to connect it to the computer with a program to download onto the phone, is this kies?
iamlegendfam said:
Ah right, yes tried that and I'm into recovery... It says downloading, but not sure where from or if it is doing anything?
Click to expand...
Click to collapse
then that is downloading mode not rec mode! okay hold on to volume down+ home+ power and flash stock firmware via odin.
sriram231092 said:
then that is downloading mode not rec mode! okay hold on to volume down+ home+ power and flash stock firmware via odin.
Click to expand...
Click to collapse
Yeah, realised after I said it cannot get into recovery at all, so going to do what you just said.
Thanks for your help, I'll get back to you if (when) all goes well
sriram231092 said:
then that is downloading mode not rec mode! okay hold on to volume down+ home+ power and flash stock firmware via odin.
Click to expand...
Click to collapse
Any idea what drivers I have to install for the S3, I don't think its recognised by my PC, sorry to be a pain
iamlegendfam said:
Any idea what drivers I have to install for the S3, I don't think its recognised by my PC, sorry to be a pain
Click to expand...
Click to collapse
KIES or the Samsung USB Drivers .
Suggest you read first.
BASICS
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
iamlegendfam said:
Any idea what drivers I have to install for the S3, I don't think its recognised by my PC, sorry to be a pain
Click to expand...
Click to collapse
the drivers should automatically install as soon as you connect the phone. did you try all the usb ports on the pc/laptop? sometimes might be faulty usb ports also!
sriram231092 said:
the drivers should automatically install as soon as you connect the phone. did you try all the usb ports on the pc/laptop? sometimes might be faulty usb ports also!
Click to expand...
Click to collapse
Got it working again in the end flashed stock unrooted firmware and re-rooted
Thanks for your help :good:

Letv One Pro X800 - No fastboot

If I press power + volume down all I get is a picture of a penguin, which stays there until the phone runs out of battery.
Does anyone know how I fix this?
pane32 said:
If I press power + volume down all I get is a picture of a penguin, which stays there until the phone runs out of battery.
Does anyone know how I fix this?
Click to expand...
Click to collapse
This is normal I don't think you can do anything with that, what do you actually want to achieve?
Same here. When I try to install TWRP all I get is the tux penguin. Trying to root the x800.
shadow78 said:
This is normal I don't think you can do anything with that, what do you actually want to achieve?
Click to expand...
Click to collapse
I was trying to root the phone and get a new ROM but I've since managed to do both.
I wrote a very quick guide in another thread, for anyone else experiencing the same problem.
pane32 said:
I was trying to root the phone and get a new ROM but I've since managed to do both.
I wrote a very quick guide in another thread, for anyone else experiencing the same problem.
Click to expand...
Click to collapse
The guide in the other thread didn't exactly tell you how to get around the tux penguin issue.
Darkness2748 said:
The guide in the other thread didn't exactly tell you how to get around the tux penguin issue.
Click to expand...
Click to collapse
Yes it does. I mentioned the penguin specifically:
Seeing the penguin is normal. I have managed to fix the issues I have and I am running a custom ROM by Cuoco92, all thanks to the help I got from @simidisc.
I will assume that you have installed all appropriate USB drivers.
1. Visit http://bit.ly/1Q6irPH and download SEZIONE FIRMWARE and SEZIONE RECOVERY. Don't worry about this being in Italian - I don't speak Italian and managed no problem.
2. Copy the zip file from Sezione Firmware to your phone.
3. Unzip the the recovery file on your computer and connect your phone to your computer.
4. After unzipping TWRP, run "Install Over Fastboot".
5. Your phone will reboot and you will see THE PENGUIN. Just press VOLUME UP + POWER at the same time and your phone will reboot to TWRP.
6. You should now be able to flash the ROM, making sure to wipe cache, dalvik etc.
help needed..
bro..can you give the link thread..because i am also facing same problem installing twrp.. the penguin logo come and then boot automatically to the original state..thankx
ragib1982 said:
bro..can you give the link thread..because i am also facing same problem installing twrp.. the penguin logo come and then boot automatically to the original state..thankx
Click to expand...
Click to collapse
Did you follow the steps above? When you see the Penguin, did you press VOL UP + POWER?
If so, what happened? This should boot to TWRP.
I did but nothing happen
ragib1982 said:
I did but nothing happen
Click to expand...
Click to collapse
Sorry, but I don't know what to do now.
Have you been on http://www.letv.re/? It is a forum dedicated to Letv phones and someone there might have a solution.
TWRP Fastboot
I am having the same problem.
The penguin comes on then no matter what I do, it either just reboots (if I keep holding power down) and continues to do this for ever, or boots into the LeEco recovery, if I press volume up and power, or just boots into EUI rom if I do nothing.
Any suggestions?
Phone is not rooted.
ragib1982 said:
bro..can you give the link thread..because i am also facing same problem installing twrp.. the penguin logo come and then boot automatically to the original state..thankx
Click to expand...
Click to collapse
KarlDroid said:
I am having the same problem.
The penguin comes on then no matter what I do, it either just reboots (if I keep holding power down) and continues to do this for ever, or boots into the LeEco recovery, if I press volume up and power, or just boots into EUI rom if I do nothing.
Any suggestions?
Phone is not rooted.
Click to expand...
Click to collapse
Friend, did you solve Your problem. I have the same.
When i ENTER TO FASTBOOT MODE (Vol- +power) penguin appearf for few seconds and system starts to eui. I cant flas TWRP and do nothing. Few seconds of penguin and restart. ehhhh..

TWRP is not working

I don't know if this is the right place for my question, but here it is:
I am currently trying to install LineageOS on my Honor 5x and everything worked until now. I used
Code:
fastboot flash recovery twrp-3.1.1-0-kiwi.img
to install twrp and the console said it would work. But now, if I press Volume Up and Power, it opens the standard Huawei eRecovery. How can I fix that problem?
Huwey said:
But now, if I press Volume Up and Power, it opens the standard Huawei eRecovery. How can I fix that problem?
Click to expand...
Click to collapse
Erecovery because USB plugged. Remove wire and shall be fine
Be sure the phones not plugged into power or PC, then try. Mine does same if plugged into anything.
Thanks for the help, it works now.
Huwey said:
I don't know if this is the right place for my question, but here it is:
I am currently trying to install LineageOS on my Honor 5x and everything worked until now. I used
Code:
fastboot flash recovery twrp-3.1.1-0-kiwi.img
to install twrp and the console said it would work. But now, if I press Volume Up and Power, it opens the standard Huawei eRecovery. How can I fix that problem?
Click to expand...
Click to collapse
Another one that doesnt read

i bricked my p20 lite

hello today i tried to root my phone with twrp i did everything and didnt manage to root so decided to wipe data with twrp everything was looking fine before i reboot my phone everytime i reboot it loads to twrp logo and doesnt go further i tried to load into fastboot & recovery mode but its not working what should i do
kloarn said:
hello today i tried to root my phone with twrp i did everything and didnt manage to root so decided to wipe data with twrp everything was looking fine before i reboot my phone everytime i reboot it loads to twrp logo and doesnt go further i tried to load into fastboot & recovery mode but its not working what should i do
Click to expand...
Click to collapse
install a compatible TWRP
Download here
and continue the process. That should help.
kloarn said:
i tried to load into fastboot & recovery mode
Click to expand...
Click to collapse
Turn off your phone, press and hold Vol Up and plug in cable.
-Alf- said:
Turn off your phone, press and hold Vol Up and plug in cable.
Click to expand...
Click to collapse
nothing happens
kloarn said:
nothing happens
Click to expand...
Click to collapse
Sorry, typo , turn off your phone, press and hold Vol Down and plug in cable.
-Alf- said:
Sorry, typo , turn off your phone, press and hold Vol Down and plug in cable.
Click to expand...
Click to collapse
nothing happened again
kloarn said:
nothing happened again
Click to expand...
Click to collapse
Try enter eRecovery - turn off, conect to PC, press and hold Power & Vol Up. In eRecovery select "Download latest etc etc).
(You need Wi-Fi).
-Alf- said:
Try enter eRecovery - turn off, conect to PC, press and hold Power & Vol Up. In eRecovery select "Download latest etc etc).
(You need Wi-Fi).
Click to expand...
Click to collapse
it loads twrp logo nothing more
kloarn said:
it loads twrp logo nothing more
Click to expand...
Click to collapse
Do you have TWRP installed instead of Recovery or eRecovery?
-Alf- said:
Do you have TWRP installed instead of Recovery or eRecovery?
Click to expand...
Click to collapse
i think twrp is installed to eRecovery
can you help me from discord ?
kloarn said:
i think twrp is installed to eRecovery
Click to expand...
Click to collapse
kloarn said:
i think twrp is installed to eRecovery
Click to expand...
Click to collapse
Okay, try the following: turn off, press and hold Power and both Volume buttons, what will happen ...
-Alf- said:
Okay, try the following: turn off, press and hold Power and both Volume buttons, what will happen ...
Click to expand...
Click to collapse
stuck on your device has been unlocked and can't be trusted your device is booting now
kloarn said:
stuck on your device has been unlocked and can't be trusted your device is booting now
Click to expand...
Click to collapse
Game over,imo. No fastboot, no eRecovery, no dload method... Try testpoint methode with board software, DC-phoenix or service center.
adb is working maybe it will help :/
-Alf- said:
Game over,imo. No fastboot, no eRecovery, no dload method... Try testpoint methode with board software, DC-phoenix or service center.
Click to expand...
Click to collapse
hi again i managed to get on to fastboot & recovery mode now cmd commands not working it says waiting for device and bootloader gives error code that says coldboot 16
okay i managed to get in to eRecovery and now its installing the package thank you for your help
kloarn said:
okay i managed to get in to eRecovery and now its installing the package thank you for your help
Click to expand...
Click to collapse
No problem.

Categories

Resources