I don't know if this is the right place for my question, but here it is:
I am currently trying to install LineageOS on my Honor 5x and everything worked until now. I used
Code:
fastboot flash recovery twrp-3.1.1-0-kiwi.img
to install twrp and the console said it would work. But now, if I press Volume Up and Power, it opens the standard Huawei eRecovery. How can I fix that problem?
Huwey said:
But now, if I press Volume Up and Power, it opens the standard Huawei eRecovery. How can I fix that problem?
Click to expand...
Click to collapse
Erecovery because USB plugged. Remove wire and shall be fine
Be sure the phones not plugged into power or PC, then try. Mine does same if plugged into anything.
Thanks for the help, it works now.
Huwey said:
I don't know if this is the right place for my question, but here it is:
I am currently trying to install LineageOS on my Honor 5x and everything worked until now. I used
Code:
fastboot flash recovery twrp-3.1.1-0-kiwi.img
to install twrp and the console said it would work. But now, if I press Volume Up and Power, it opens the standard Huawei eRecovery. How can I fix that problem?
Click to expand...
Click to collapse
Another one that doesnt read
Related
If I press power + volume down all I get is a picture of a penguin, which stays there until the phone runs out of battery.
Does anyone know how I fix this?
pane32 said:
If I press power + volume down all I get is a picture of a penguin, which stays there until the phone runs out of battery.
Does anyone know how I fix this?
Click to expand...
Click to collapse
This is normal I don't think you can do anything with that, what do you actually want to achieve?
Same here. When I try to install TWRP all I get is the tux penguin. Trying to root the x800.
shadow78 said:
This is normal I don't think you can do anything with that, what do you actually want to achieve?
Click to expand...
Click to collapse
I was trying to root the phone and get a new ROM but I've since managed to do both.
I wrote a very quick guide in another thread, for anyone else experiencing the same problem.
pane32 said:
I was trying to root the phone and get a new ROM but I've since managed to do both.
I wrote a very quick guide in another thread, for anyone else experiencing the same problem.
Click to expand...
Click to collapse
The guide in the other thread didn't exactly tell you how to get around the tux penguin issue.
Darkness2748 said:
The guide in the other thread didn't exactly tell you how to get around the tux penguin issue.
Click to expand...
Click to collapse
Yes it does. I mentioned the penguin specifically:
Seeing the penguin is normal. I have managed to fix the issues I have and I am running a custom ROM by Cuoco92, all thanks to the help I got from @simidisc.
I will assume that you have installed all appropriate USB drivers.
1. Visit http://bit.ly/1Q6irPH and download SEZIONE FIRMWARE and SEZIONE RECOVERY. Don't worry about this being in Italian - I don't speak Italian and managed no problem.
2. Copy the zip file from Sezione Firmware to your phone.
3. Unzip the the recovery file on your computer and connect your phone to your computer.
4. After unzipping TWRP, run "Install Over Fastboot".
5. Your phone will reboot and you will see THE PENGUIN. Just press VOLUME UP + POWER at the same time and your phone will reboot to TWRP.
6. You should now be able to flash the ROM, making sure to wipe cache, dalvik etc.
help needed..
bro..can you give the link thread..because i am also facing same problem installing twrp.. the penguin logo come and then boot automatically to the original state..thankx
ragib1982 said:
bro..can you give the link thread..because i am also facing same problem installing twrp.. the penguin logo come and then boot automatically to the original state..thankx
Click to expand...
Click to collapse
Did you follow the steps above? When you see the Penguin, did you press VOL UP + POWER?
If so, what happened? This should boot to TWRP.
I did but nothing happen
ragib1982 said:
I did but nothing happen
Click to expand...
Click to collapse
Sorry, but I don't know what to do now.
Have you been on http://www.letv.re/? It is a forum dedicated to Letv phones and someone there might have a solution.
TWRP Fastboot
I am having the same problem.
The penguin comes on then no matter what I do, it either just reboots (if I keep holding power down) and continues to do this for ever, or boots into the LeEco recovery, if I press volume up and power, or just boots into EUI rom if I do nothing.
Any suggestions?
Phone is not rooted.
ragib1982 said:
bro..can you give the link thread..because i am also facing same problem installing twrp.. the penguin logo come and then boot automatically to the original state..thankx
Click to expand...
Click to collapse
KarlDroid said:
I am having the same problem.
The penguin comes on then no matter what I do, it either just reboots (if I keep holding power down) and continues to do this for ever, or boots into the LeEco recovery, if I press volume up and power, or just boots into EUI rom if I do nothing.
Any suggestions?
Phone is not rooted.
Click to expand...
Click to collapse
Friend, did you solve Your problem. I have the same.
When i ENTER TO FASTBOOT MODE (Vol- +power) penguin appearf for few seconds and system starts to eui. I cant flas TWRP and do nothing. Few seconds of penguin and restart. ehhhh..
Ok. I tried rooting Honor 7 earlier today. I did every step, but in the last step when I installed the SuperSU trough the TWRP, I noticed a big problem.
When I rebooted the phone, it just went into the chinese TWRP. Tried everything, only goes into TWRP. Any help?
My phone model is PLK-L01.
try follow this tutorial.
http://forum.xda-developers.com/honor-7/general/honor-7-button-combinations-clarified-t3320467
Connected to a computer:
Volume up + Power on: Huawei eRecovery (reboot / download / shutdown options - used for 'recovery loop' fix, see below)
hope it will solved your problem..
lockmunk said:
try follow this tutorial.
http://forum.xda-developers.com/honor-7/general/honor-7-button-combinations-clarified-t3320467
Connected to a computer:
Volume up + Power on: Huawei eRecovery (reboot / download / shutdown options - used for 'recovery loop' fix, see below)
hope it will solved your problem..
Click to expand...
Click to collapse
Nope. Volume up + power on only boots to TWRP
I tried downloading stock roms and instaling them trought TWRP, one rom was corrupted and another did not work, it still booted to TWRP. I found some other roms but they must be downloaded from mega.nz, which does not work on my computer
Jonni1 said:
Nope. Volume up + power on only boots to TWRP
Click to expand...
Click to collapse
connect with usb cable?
lockmunk said:
connect with usb cable?
Click to expand...
Click to collapse
The phone was connected to computer with usb cable (the computer did not regocnize it though).
Any quick help? I need my phone for the weekend...I would appreciate a lot if someone could help!
Jonni1 said:
Nope. Volume up + power on only boots to TWRP
Click to expand...
Click to collapse
Jonni1 said:
Any quick help? I need my phone for the weekend...I would appreciate a lot if someone could help!
Click to expand...
Click to collapse
you should read carefully the link given to you previously and you should be able to solve it yourself.
lockmunk said:
you should read carefully the link given to you previously and you should be able to solve it yourself.
Click to expand...
Click to collapse
Ok, this is what I did:
-Connect the phone to windows computer
-Go to TWRP, select reboot and system
-Try does the phone recognize the computer by using volume down + power. Worked.
-Try volume up + power on on boot (the phone goes black after a moment, vibrates and goes back to the white Honor text)
Does not work.
Omg guys thank you so much, it worked by pressing only the volume up button, thank you guys sooo much thank you i love you!!!
Hey there,
I installed CM13 on my OP2 a few days ago and it worked fine.
Today I accidentally restarted my phone into the fastbootmode and wanted to exit. So I kept holding the power button.
Well, it shutted down. But I can't start it anymore. If it's not charging nothing happens by holding the power button. If the charging cable is plugged in, it vibrates after a while like usual and then the OnePlus Symbol appears for about half a second and then the phone dies again.
Can you guys help me out getting my phone up again?
By the way: I'm completely new with rooting, flashing & xda, so please help me if I've done anything wrong :angel:
CptCrunchy said:
Hey there,
I installed CM13 on my OP2 a few days ago and it worked fine.
Today I accidentally restarted my phone into the fastbootmode and wanted to exit. So I kept holding the power button.
Well, it shutted down. But I can't start it anymore. If it's not charging nothing happens by holding the power button. If the charging cable is plugged in, it vibrates after a while like usual and then the OnePlus Symbol appears for about half a second and then the phone dies again.
Can you guys help me out getting my phone up again?
By the way: I'm completely new with rooting, flashing & xda, so please help me if I've done anything wrong :angel:
Click to expand...
Click to collapse
Did you rebooted to Fastboot mode just after flashing the ROM or you were already on CM13? it's not possible that you brick your device just by enter in fastboot mode something happend but i'm sure there is a solution
Chris-woods said:
Did you rebooted to Fastboot mode just after flashing the ROM or you were already on CM13?
Click to expand...
Click to collapse
No not after flashing, it already worked about a week without any problems...
Can you boot into recovery
Sent from my ONE A2003 using XDA-Developers mobile app
stevoswifty said:
Can you boot into recovery
Click to expand...
Click to collapse
Nope :/ Cannot do anything :/
CptCrunchy said:
Nope :/ Cannot do anything :/
Click to expand...
Click to collapse
Are you sure your phone is charging? Did you flash install a something that requiere root or that could modify your phone is your phone recognize by your computer if you connect it ?
Chris-woods said:
Are you sure your phone is charging?
Click to expand...
Click to collapse
Yes, have tried a second phone on that socket and on that cable
Chris-woods said:
Did you flash install a something that requiere root or that could modify your phone
Click to expand...
Click to collapse
I only rooted it for the installation of CyanogenMod. In the Developersettings, the root is deactivated.
Chris-woods said:
is your phone recognize by your computer if you connect it ?
Click to expand...
Click to collapse
Windows plays the connect sound, but it wont show up on any menue
CptCrunchy said:
Yes, have tried a second phone on that socket and on that cable
I only rooted it for the installation of CyanogenMod. In the Developersettings, the root is deactivated.
Windows plays the connect sound, but it wont show up on any menue
Click to expand...
Click to collapse
try to open command prompt and to type fastboot devices and show me a screenshot or tell me what it says btw were you H2OS Marshmallow or OOS 3.0 Marshmallow before installing CM13 ?
Chris-woods said:
try to open command prompt and to type fastboot devices and show me a screenshot or tell me what it says btw were you H2OS Marshmallow or OOS 3.0 Marshmallow before installing CM13 ?
Click to expand...
Click to collapse
The cmd says nothing. It skips a line and waits for a new input...
Before CM13 I was on OxygenOS 2.1.1 (not flashed)
CptCrunchy said:
The cmd says nothing. It skips a line and waits for a new input...
Before CM13 I was on OxygenOS 2.1.1 (not flashed)
Click to expand...
Click to collapse
Look at this http://forum.xda-developers.com/oneplus-2/general/assistance-solutions-tips-tricks-t3335469
Sounds like another case of stuck volume button, like other people that has had just this problem with stuck in fastboot.
I upgrade my phone to EMUI B330 (Android 6.0) and I used TWRP recovery to flashed Supersu 2.79. But after flashed and reboot, my phone cannot start up. It always blocks during starting (Always showing "Honor" logo). I cannot enter the system. How can I fix the problem?
did you use superSU V2.62? others dont work on honor 7
thelous said:
did you use superSU V2.62? others dont work on honor 7
Click to expand...
Click to collapse
Thank you very much! It works!!! I also found that SuperSU v2.64 is working, too!!!:good:
how you made it to start
Hi, i have the same issue, installed superSU 2.7, and cant go anyfurther,
how you were able to uninstall, and install the superSU 2.6
Thanks in advance
Nemo1981 said:
Hi, i have the same issue, installed superSU 2.7, and cant go anyfurther,
how you were able to uninstall, and install the superSU 2.6
Thanks in advance
Click to expand...
Click to collapse
you could use twrp file manager or flash over new sipersu i think....
thelous said:
you could use twrp file manager or flash over new sipersu i think....
Click to expand...
Click to collapse
Thanks for the reply,
I cant get to the twrp, when i press volumeup, the phone keep restarting,
what do you mean by "flash over new sipersu",
the problem, the phone keep restarting when i press VolumeUp+Down+power, then i release power, and keep pressing volumeUP+volumeDown,
but instead of going to twrp, the phone restart
Nemo1981 said:
Thanks for the reply,
I cant get to the twrp, when i press volumeup, the phone keep restarting,
what do you mean by "flash over new sipersu",
the problem, the phone keep restarting when i press VolumeUp+Down+power, then i release power, and keep pressing volumeUP+volumeDown,
but instead of going to twrp, the phone restart
Click to expand...
Click to collapse
let power go as soon as you see honor logo
still same
thelous said:
let power go as soon as you see honor logo
Click to expand...
Click to collapse
I did, once i sense the vibration, i let go the power, and keep pressing on the volumeUp+down buttons, but the same issue
even if i only press the volumeUp button, it also restart instead of going to the twrp folder,
is there is any software, or other way to access it via pc, or something,
Nemo1981 said:
I did, once i sense the vibration, i let go the power, and keep pressing on the volumeUp+down buttons, but the same issue
even if i only press the volumeUp button, it also restart instead of going to the twrp folder,
is there is any software, or other way to access it via pc, or something,
Click to expand...
Click to collapse
adb should work
adb not recognized on my computer anymore, cant see the phone, mtp driver not working anymore
but fastboot is working, i can see the mobile in fastboot mode
Nemo1981 said:
adb not recognized on my computer anymore, cant see the phone, mtp driver not working anymore
but fastboot is working, i can see the mobile in fastboot mode
Click to expand...
Click to collapse
You can enter the fastboot mode and then re-flash the TWRP. After that, you reboot the phone and keep pressing the volumeUP button while it's booting. So that you can enter the TWRP.
My method is that I enter TWRP and then use "Advantage Wipe" to wipe cache and davik cache. Then, flash v2.64 of SuperSU and reboot system. It works.
Nemo1981 said:
adb not recognized on my computer anymore, cant see the phone, mtp driver not working anymore
but fastboot is working, i can see the mobile in fastboot mode
Click to expand...
Click to collapse
You can enter fastboot mode to re-flash TWRP. After that, you can enter TWRP and wipe cache and davike cache. Finally, flash v2.64 and reboot system.
hello,
so the threat is called how to root honor 7......and you only write about the SuperSU issue, not about the procedure how to root it.
what is the solution for rooting the H7 with android 6.0 build 380?
The right files for doing it like TWRP, IMG aso.
THX
I have a Huawei Mate 10 Pro that is unlocked but won't install Lineage OS. I have tried using the Huawei Update Extractor and flashing ramdisk, recovery ramdisk, and system.img. I have flash Lineage OS several times. Now I am stuck on the "Your device is unlocked" screen with no action happening. If I hold Volume Up to enter the e-recovery, I am only present with three options, with only two doing anything which are working: Restart and Shutdown (this is the only way I can shut down the device). There is no wipe data option. I know I am running a BLA-L29 model and pretty sure it is the European model. I installed TWRP but getting to that screen is difficult as each time I hold a button combination (Volume Up + power button or Volume Down + power button), nothing happens (I do know it is installed as I have reach the screen several times on my device). Any suggestion? I would like to install Lineage but I would be fine returning to stock OS. I apologize for the redundancy of this thread (potentially) but I couldn't find the answer anywhere, and nothing specific to my situation.
afjohn483 said:
I have a Huawei Mate 10 Pro that is unlocked but won't install Lineage OS. I have tried using the Huawei Update Extractor and flashing ramdisk, recovery ramdisk, and system.img. I have flash Lineage OS several times. Now I am stuck on the "Your device is unlocked" screen with no action happening. If I hold Volume Up to enter the e-recovery, I am only present with three options, with only two doing anything which are working: Restart and Shutdown (this is the only way I can shut down the device). There is no wipe data option. I know I am running a BLA-L29 model and pretty sure it is the European model. I installed TWRP but getting to that screen is difficult as each time I hold a button combination (Volume Up + power button or Volume Down + power button), nothing happens (I do know it is installed as I have reach the screen several times on my device). Any suggestion? I would like to install Lineage but I would be fine returning to stock OS. I apologize for the redundancy of this thread (potentially) but I couldn't find the answer anywhere, and nothing specific to my situation.
Click to expand...
Click to collapse
May i know still problem in your mobile....
truthteller609 said:
May i know still problem in your mobile....
Click to expand...
Click to collapse
I was able to fix it. Had to reinstall the original software, then try again. Thank you
afjohn483 said:
I was able to fix it. Had to reinstall the original software, then try again. Thank you
Click to expand...
Click to collapse
Does your fast boot is workung
truthteller609 said:
Does your fast boot is workung
Click to expand...
Click to collapse
Yes
afjohn483 said:
Yes
Click to expand...
Click to collapse
Your getting bootloop
truthteller609 said:
Your getting bootloop
Click to expand...
Click to collapse
Everything fix now