Hi all
I was got bootloops, and then trying to get back to stock, but everytime I flash, it get stuck at prism.img, no error, just wouldnt move. Now the phone only boot into that blue screen saying there was an error during update.
Please help.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> userdata.img
<ID:0/005> misc.bin
<ID:0/005> metadata.img
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 10394 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> up_param.bin
<ID:0/005> ldfw.img
<ID:0/005> tzsw.img
<ID:0/005> keystorage.bin
<ID:0/005> dpm.img
<ID:0/005> uh.bin
<ID:0/005> vbmeta.img
<ID:0/005> harx.bin
<ID:0/005> tzar.img
<ID:0/005> vddcal_fw.bin
<ID:0/005> ssp.img
<ID:0/005> boot.img
<ID:0/005> vendor_boot.img
<ID:0/005> recovery.img
<ID:0/005> dtbo.img
<ID:0/005> super.img
<ID:0/005> vbmeta.img
<ID:0/005> vbmeta_system.img
<ID:0/005> modem.bin
<ID:0/005> modem_debug.bin
<ID:0/005> cache.img
<ID:0/005> prism.img
hay man
have you find any Fix for it
Related
Hey all,
Long story short is my VZW SM-N950U Note 8 is not working well on T-Mobile because it still has VZW firmware. I downloaded Odin 3.07 and 3.12 and used samfirm to get the TMO firmware. I've attempted to DL multiple times and it fails. Is there something else I have to do, or is it just not possible to do? Also it never gets a loading bar or anything, just fails or stick on setup connection.
Thanks in advance below is the cut n paste of the log from odin 3.12
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> persist.img.ext4
<ID:0/005> userdata.img.ext4
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
hi...
ill try to flash my phone but always get stuck at ... "system.img"
Flash tools Odinv3.12.7
Firmware i tried G925F_1_20180809104101_qr55subv5q_fac ----- SM-G925F_1_20180716174114_hxg9p8nitx_fac
log.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried
G925FXXU1AOCV_G925FDDX1AOCV_DTM
G925FXXU2POGN_G925FDDX2POGO_DTM
G925FXXU6ERF5_G925FDDX6ERG1_DTM
DBT-G920FXXU2BOFJ
nothing works^^
should i try one of these?
updato.com/firmware-archive-select-model?q=SM-G925F&exact=1&r=DTM&v=&rpp=50
unnamedquaker said:
hi...
ill try to flash my phone but always get stuck at ... "system.img"
Flash tools Odinv3.12.7
Firmware i tried G925F_1_20180809104101_qr55subv5q_fac ----- SM-G925F_1_20180716174114_hxg9p8nitx_fac
log.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried
G925FXXU1AOCV_G925FDDX1AOCV_DTM
G925FXXU2POGN_G925FDDX2POGO_DTM
G925FXXU6ERF5_G925FDDX6ERG1_DTM
DBT-G920FXXU2BOFJ
nothing works^^
should i try one of these?
updato.com/firmware-archive-select-model?q=SM-G925F&exact=1&r=DTM&v=&rpp=50
Click to expand...
Click to collapse
You did not inform about your device situation details and ROM details. including android versions
x1123 said:
You did not inform about your device situation details and ROM details. including android versions
Click to expand...
Click to collapse
it is not my smartphone. I got it with the message "damaged device memory" after an update.
status : nothing on the phone (recovery only)
twrp not working (unable to mount anything)
I had a Movistar (Spain) firmware installed on my Samsung S5, and I wanted to replace it with some default Samsung firmware. It was working for a while but now it's stuck in Samsung logo bootloop. I tried like 5 different firmwares, one of them launched the phone but had some password on it, one of them just wouldn't go past the launch logo, one of them caused my motherboard to overheat like crazy, and last one gave me an error while trying to do the upgrade "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I was doing the upgrades with Odin. Please help me select the right firmware, I'm afraid to carry on on my own, I feel like I'll just do more damage.
Edit: I got this error in Odin when I tried flashing G900FXXU1CQDC
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4137 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> persist.img.ext4
<ID:0/007> userdata.img.ext4
<ID:0/007> modem.bin
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response from boot-loader
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Size)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I once tried to autoroot it but I factory reset it because the sim didn't work, and I went to developer options and had it OEM Locked, I don't know what was I thinking, seriously, and I tried to use Odin v3 to flash original firmware into it, It gives me this: <ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2546 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried using multiple odin's and I have a Samsung usb driver installed.
Android Recovery
Samsung/j5y17ltexx/j5y17lte
7.0/NRD90M/J530FXXU1AQF5
Please Help Me I Have No Phone Currently, The Small And Big Are Going To Be Appreciated, Sincerely, RetroSkills.
This morning My Samsung Galaxy J5 prime Started hanging randmoly , I put it on charging and left. After some time when i came back it was switched of and when i started it showed Could Not do normal Boot , Invalid Kernal Length. i have never tried to root my phone or flash anything . It was just normally used.
I dont know the exact firmwares and build no since it wont start . It has SM-G570FZKGINS on its box . Any way to recover it without loosing data ?
Re-flash phone's Stock ROM by means of ODIN
jwoegerbauer said:
Re-flash phone's Stock ROM by means of ODIN
Click to expand...
Click to collapse
I downloaded stock rom and and added BL,AP,CP,CSC In ODIN but it gave this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 2848 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> param.bin
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Could this be beacuse this is not correct ROM ?
Could this be because in Download mode its says FRP lock : ON ?
Anyone there with any Idea what to do ?