Related
Hi All
Since there is all sorts of development running at the moment and the treble Pie has been put within radar, I thought I make a grouped topic/discussion only for this sGSI version. Some known install procedure, adds and also the pros and cons about this version so everybody can learn.
As I have seen and heared, some users are confused and didn't find all data and files needed to boot, I grouped them here in order and add some other files to finalize what you can do with this version at the moment.
I give all the credits to those who made this possible so far.
Correct me where needed.
Base : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659 thnx @erfanoabdi
Pre-requirements :
*unlocked bootloader
*B12 Nfound
Files needed :
1. TWRP 3.2.1.8 treble thnx @NFound
2. AXON7_GPT_ADD_VENDOR_800MB.zip @djkuz
3. Project_Treble_v1.1_Axon7-by-NFound.zip @NFound
4. P-PR1-sGSI-Aonly.zip - extract the 7z to the img and put it on extSD
5. POST-sGSI_1_v0.14.zip
6. POST-sGSI_2_v0.17.zip
7. POST-sGSI_3_v0.5.zip
Installation :
a Install TWRP 3.2.1-8 - TREBLE, reboot into twrp
b reboot to EDL
c Install AXON7_GPT_ADD_VENDOR_800MB.zip through Miflash (so extract files to same folder name and search it via Miflash)
d reboot into twrp again
e format system, data, cache, wipe vendor
f install Project_Treble_v1.1_Axon7-by-NFound.zip. This will 'resize' vendor to a +-500mb / afaik also compatible with LOS15 (treble) now, betas(B01,B12), all official roms A7, GSI's
g install P-PR1-sGSI-Aonly.zip, so tap install/img and choose the img file and flash
h install the 1, 2, and 3 Post-sGSI files in order, so mount /vendor and flash those 3 files.
i Reboot
After boot :
*use the gms , install it and create an account on google. It will speed up installation
* use Gcam to have a working camera : https://github.com/AospExtended/platform_vendor_aosp/blob/8.1.x/prebuilt/common/apk/Gcam.apk
* use this patch to have settings working in camera : https://forum.xda-developers.com/showpost.php?p=77296562&postcount=55 thnx @yarecco
* disable the navbar with : go to vendor / build.prop and add "qemu.hw.mainkeys=1"
or flash this A2017X Vendor NavBar Remover
* reverse softkeys : https://forum.xda-developers.com/axon-7/themes/mod-soft-key-reverse-using-synapticsdsx-t3827574
* for those who have call issues : https://forum.xda-developers.com/showpost.php?p=77285228&postcount=22 thnx @atakan33
* best, even on v1.1 to flash the framework overlay again : https://www.sendspace.com/file/x7jv8q. Makes DT2W work as it should !
*flash the pr1-lag-fix.zip to get a smoother experience thnx @atakan33 to mention it
As far as I know these things work :
*playstore....
*magisk 16.4, 16.7 working ok - safetynet pass ok confirmed on 16.7 - all should work, only a temp problem : https://twitter.com/topjohnwu/status/1029239685338419200?s=09
*full root r/w
*modules like youtube, jojoc....
*adaway
*call app but with ECHO so other persons hear themselves... for some members, even without Volte, the echo is note there and call volume can be adjusted
*no overheating with the v1.1
*better battery performance since v1.1
*dt2w works if you flash the framework overlay again when you're already booted. I uploaded it here since it got lost : https://www.sendspace.com/file/x7jv8q
* fast charge works, no heating at all
* spilt screen : just long press the icon in recents thnx @SantiHurtado
Not working :
*auto-brightness...or not in a way we're used to.... - there is no quick settings toggle, so if you want to untick auto, go to settings/display...
*dolby , but try this : https://forum.xda-developers.com/showpost.php?p=77289658&postcount=31 thnx @yarecco NOT WORKING - tested it myself and even bootloop when removing them. So if you want to try BACKUP FIRST !
*usb bug : greyed out so no control - in dev options you can choose an option but the usb setting still will be greyed out
......
Hope you can join in to give your opinion and add some more feedback to the pros and cons.
Join telegram Axon7 (s)GSI trebleSHOOT
Thanks man.
Based on AospExtended thread, I have done step 1 and 2. At present, I am on the latest AospExtended treble. I was wondering if someone can tell me if I need to do step 3 to 7. Do I need these ONLY if I want to try other GSI Roms? Or, do I need to do all of them regardless sooner or later?
Thanks.
EDIT: After more reading on the other thread, I think I understand more about this. Step 4 to 7 are to install the GSI rom. I guess my question now is if for now I want to keep using the latest AospExtended treble (Oreo), do I need to do step 3? Thanks
The GCAM link does not work. Saying file too large to display.
have installed Magisk 16.7 and safety pass is true
Gesendet von meinem ZTE A2017G mit Tapatalk
What is meant by sGSI or semi GSI?
ttkian said:
Based on AospExtended thread, I have done step 1 and 2. At present, I am on the latest AospExtended treble. I was wondering if someone can tell me if I need to do step 3 to 7. Do I need these ONLY if I want to try other GSI Roms? Or, do I need to do all of them regardless sooner or later?
Thanks.
EDIT: After more reading on the other thread, I think I understand more about this. Step 4 to 7 are to install the GSI rom. I guess my question now is if for now I want to keep using the latest AospExtended treble (Oreo), do I need to do step 3? Thanks
Click to expand...
Click to collapse
For this semiGSI you will need all steps a to i. For GSI's you can skip step h afaik.
Raffikie said:
The GCAM link does not work. Saying file too large to display.
Click to expand...
Click to collapse
Is working fine. Go to the page and just download
Rennert said:
have installed Magisk 16.7 and safety pass is true
Gesendet von meinem ZTE A2017G mit Tapatalk
Click to expand...
Click to collapse
Are you on v1.0 or v1.1 ? Because as for me on v1.0 I had a pass but on v1.1 it was a no go. Special setting used ?
EDIT : safetynet works, only cant be checked for the moment : https://twitter.com/topjohnwu/status/1029239685338419200?s=09
StickMonster said:
What is meant by sGSI or semi GSI?
Click to expand...
Click to collapse
That's the same. But Oki explained it imo very well here : https://forum.xda-developers.com/showpost.php?p=77328471&postcount=4793
A2017X_vendor_navbar_remover
For those who don't want to mess with their build.prop, just flash this and it will remove the navbar (if there is).
It'll work on all vendor build.props in future.
Backup of original build.prop will be created in /vendor so you can always revert if needed.
1. Since DT2W wasn't working, as in my experience and many others, on V1.1, I reflashed the Framework Overlay again and DT2W is working now.
2. Also, seems with Volte working properly, @kountry83, could manage to get the incall echo disappear and make decent calls. Even call volume is adjustable.
We're testing on TG (feel free to join too) further on.
3. The Dolby DDP and Audiomodification Lib seems not to work properly. Even bootloop when removing it...Did someone succeed in Dolby ?
4. flash the pr1-lag-fix.zip to get a smoother experience thnx @atakan33 to mention it
Dolby doesn't work, FC when start app. I don't have remove it, but can test it.
must i change the bootstack? because yesterday i tried to install PR1 but it cannot boot because i use universal bootstack that used on LOS 16 treble, i use Bootstack 12 and it boot, what is the best bootstack for this? thank you
shuemantri said:
must i change the bootstack? because yesterday i tried to install PR1 but it cannot boot because i use universal bootstack that used on LOS 16 treble, i use Bootstack 12 and it boot, what is the best bootstack for this? thank you
Click to expand...
Click to collapse
You're good to go on the B12 bootstack from NFound. Rest is in description of OP to boot any (s)GSI in future :good:
Hi all,
as the GSI topic here is still having a few issues, i have created a gsi overlay as per phhussons instructions:
https://github.com/phhusson/treble_experimentations/wiki/How-to-create-an-overlay
The source code can be found here:
https://github.com/mKenfenheuer/vendor_hardware_overlay
Build/install instructions:
(Assuming you have a recent Ubuntu/Debian/Mint Linux machine running)
1. Install xmlstarlet and dos2unix
2. Go to build folder
3. Run bash build.sh
4. Copy treble-overlay-realme-x2pro.apk to /system/overlay in your gsi.
5. add the following property to /vendor/build.prop or replace with the attached build.prop
# Patch to add device specific match for treble overlays by mkenfenheuer
ro.vendor.build.overlay.deviceid=RMX1931
Works (confirmed by me):
- Always on display
- 90hz display
'Should' be working:
- Enables DT2W option but enabling does not seem to have any effect to me.
- VOLTE - i cannot test as my carrier does not offer this anymore
- more reliable network connection (i have noticed far less lte issues, but this is my perception)
MISC:
- Imported the settings from realme vendor (i don't know if they are nescessary)
If there are any issues, simply delete the file from /system/overlay with recovery file manager and reboot.
I've added the compiled apk to this post, in case you do not want to build it yourself.
mKenfenheuer said:
Hi all,
as the GSI topic here is still having a few issues, i have created a gsi overlay as per phhussons instructions:
https://github.com/phhusson/treble_experimentations/wiki/How-to-create-an-overlay
The source code can be found here:
https://github.com/mKenfenheuer/vendor_hardware_overlay
Build/install instructions:
(Assuming you have a recent Ubuntu/Debian/Mint Linux machine running)
1. Install xmlstarlet and dos2unix
2. Go to build folder
3. Run bash build.sh
4. Copy treble-overlay-realme-x2pro.apk to /system/overlay in your gsi.
As i have currently not flashed any gsi, i would ask you guys to test please.
Preferably with phhussons AOSP 10 gsi.
If there are any issues, simply delete the file from /system/overlay with recovery file manager and reboot.
I've added the compiled apk to this post, in case you do not want to build it yourself.
Click to expand...
Click to collapse
I copy your .apk overlay to /system/overlay and reboot. I am on evolution gsi phh based. Nothing change as far as i notice.
Great initiative @mKenfenheuer !
I'll look into the settings to see if there are other that we could use!
@ospeto from what I see in the commits try to see if volte works and if you can switch user profiles.
exadeci said:
Great initiative @mKenfenheuer !
I'll look into the settings to see if there are other that we could use!
@ospeto from what I see in the commits try to see if volte works and if you can switch user profiles.
Click to expand...
Click to collapse
I can switch user profiles just fine. Havent test volte though. By the way , the maximum brightness of gsi roms are not as bright as stock rom. Is there any fix for it?. I tried setting backlight to 255 but still not fixed.
ospeto said:
I can switch user profiles just fine. Havent test volte though. By the way , the maximum brightness of gsi roms are not as bright as stock rom. Is there any fix for it?. I tried setting backlight to 255 but still not fixed.
Click to expand...
Click to collapse
I assume switching user profiles has not been working until now?
I have just unlocked my bootloader and started working on the kernel source so lets hope i can get this moving.
I will focus on the kernel first and once this is working we can start with getting other things working.
mKenfenheuer said:
I assume switching user profiles has not been working until now?
I have just unlocked my bootloader and started working on the kernel source so lets hope i can get this moving.
I will focus on the kernel first and once this is working we can start with getting other things working.
Click to expand...
Click to collapse
I haven't switch user profile before so i also am not sure. Should i delete your apk and test again?. I can't test volte cuz my sim provider stopped supporting volte. Thank you so much for your effort. I hope you can fix brightness, 90hz display and on display fingerprint. That would be very helpful for gsi users.
The fingerprint must be an overlay issue because even with bootloader unlocked it still works
Problems I'm facing with evolutionx gsi
1-no fingerprint or face unlock (face unlock was removed from Android Q but it can be added)
2-there's no 90 hz refresh rate
3-speaker volume is lower than color is
4-brightness is slightly lower than color os also
5-need the stock camera app for video recording because gcam isn't that reliable with video recording
talalahmed said:
Problems I'm facing with evolutionx gsi
1-no fingerprint or face unlock (face unlock was removed from Android Q but it can be added)
2-there's no 90 hz refresh rate
3-speaker volume is lower than color is
4-brightness is slightly lower than color os also
5-need the stock camera app for video recording because gcam isn't that reliable with video recording
Click to expand...
Click to collapse
There is a fix for the 90hz issue for the OPPO device
90hz just fixed with dtbo.img flashing. U can find it on your how to flash android 10 gsi post's comment. I am using with 90hz now and it is working flawlessly.
ospeto said:
90hz just fixed with dtbo.img flashing. U can find it on your how to flash android 10 gsi post's comment. I am using with 90hz now and it is working flawlessly.
Click to expand...
Click to collapse
Yeah just flashed it and it's amazing
@exadeci all changes were merged into phhussons main repo and will be available in the next release.
He will also include a option in settings to force the display to a specific frame rate (eg.g 60hz) as 90hz will be the default with the overlay.
Sorry for maybe stupid question, but what letters “GSI” stand for?
SamePaul said:
Sorry for maybe stupid question, but what letters “GSI” stand for?
Click to expand...
Click to collapse
GSI -> Generic System Image
If you want to know how to flash one onto your x2 pro have a look here
https://forum.xda-developers.com/re...-to-flash-aosp-android-10-gsi-realme-t4036825
Hello , i think maximum brightness on gsi roms are not as bright as stock one. Is it gsi rom's bug or do we need overlay for it. I want to watch HDR content so i hope this can be fixed.
https://www.techbilla.com/gsi-treble-fixes-for-realme-2-pro/
This one is not working with our device
Hi everyone! I have built a dtbo.img with kernel sources from @Inkypen. With this image you should have 78hz screen refresh rate with a slightly green tint.
Requirements
- TWRP
- Mostly any custom rom, doesn't work on MIUI.
Tested ROMs
Android 11:
Pixel Experience 11 - 66hz
LineageOS 18.1 - 66hz
Havoc 4.1 - 66hz
Android 10:
Pixel Experience Plus 10 - 08/05/2020 - 78hz
Havoc 08/05/2020 78hz
Paradroid 08/05/2020 78hz
LineageOS 08/05/2020 78hz
EvolutionX -78hz (april update)
Usage
- Download dtbo78.img or dtbo66.img
- Reboot to TWRP
- Select Backup>dtbo (just for safety in case something goes wrong or your rom is not yet supported)
- Select Install>Select Image, select dtbo78.img and check "dtbo"
- Reboot
You can also flash it using "fastboot flash dtbo dtbo78.img" in fastboot mode connected to a computer.
WARNING! Use 78hz ONLY for May 2020 builds or older (not june builds, as they are based on a new kernel) for 78HZ.
Use 66hz ONLY for Android 11 builds.
This is based on Unofficial Pixel Experience 10 Build date 08.05.2020 (maintainer @Inkypen). It works fine, testufo shows 77-78hz, not perfectly syincing. I personally daily drive it.
Android 11 mod (66hz) doesn't have a green tint.
Download
Hi, could you post the stock dtbo file At the Pixel Experience friezes are observed
draand28 said:
Hi everyone! I have built a dtbo.img with kernel sources from andromeda-p-oss (android P). With this image you should have 69hz screen refresh rate without green tint.
Requirements
- TWRP
- Mostly any custom rom, maybe even MIUI 10, but not 11 beta because it uses a different kernel.
Tested ROMs
Pixel Experience Plus 10 - 25/03/2020
EvolutionX
Usage
- Download dtbo69.img
- Reboot to TWRP
- Select Backup>dtbo (just for safety in case something goes wrong or your rom is not yet supported)
- Select Install>Select Image, select dtbo69.img and check "dtbo"
- Reboot
You can also flash it using "fastboot flash dtbo dtbo69.img" in fastboot mode connected to a computer.
Download
Click to expand...
Click to collapse
You can upload a stock dtbo file?
Please
I have added it on the original post.
this might be out of topic
are those rom u use got any issue aside 5g ?
I'll be trying this mod on my Mi Mix 3 5G. First I need to unlock the bootloader and afterwards I'll install Pixel Experience. Thank you so much for your hard work!
Edit: Just tested it with Pixel Experiende Plus (13-04-2020) and it's working perfectly fine in 75Hz, thank you again!
ZeistX said:
this might be out of topic
are those rom u use got any issue aside 5g ?
Click to expand...
Click to collapse
5G is working great on custom roms (tested on Pixel experience). The phone will not show 5G option in settings or 5G icon in notification bar, but the carrier aggregation between 4G and 5G cell does happen, thus the overall speed is increased by the 5G cell. I would advice you to use the latest modem on your device available here: https://forum.xda-developers.com/mi-mix-3/xiaomi-mi-mix-3-5g-andromeda/mod-updated-modem-partition-twrp-backup-t4085329
draand28 said:
5G is working great on custom roms (tested on Pixel experience). The phone will not show 5G option in settings or 5G icon in notification bar, but the carrier aggregation between 4G and 5G cell does happen, thus the overall speed is increased by the 5G cell. I would advice you to use the latest modem on your device available here: https://forum.xda-developers.com/mi-mix-3/xiaomi-mi-mix-3-5g-andromeda/mod-updated-modem-partition-twrp-backup-t4085329
Click to expand...
Click to collapse
uwu okay thanks will try later also i have tried your mod on stock miui global 10.3.20 , its booting but the is touch not working .
will try on custom rom later
Hi!
Does this mod also work for non 5G version?
No, this mod is only for Andromeda or Mix 3 5G. For the Persues please refer to its forum, thanks!
FACCO-00 said:
Hi!
Does this mod also work for non 5G version?
Click to expand...
Click to collapse
Wrong forum mate, thread comes from 5g forums.
It's not working on miui eu rom.
draand28 said:
5G is working great on custom roms (tested on Pixel experience). The phone will not show 5G option in settings or 5G icon in notification bar, but the carrier aggregation between 4G and 5G cell does happen, thus the overall speed is increased by the 5G cell. I would advice you to use the latest modem on your device available here: https://forum.xda-developers.com/mi...-updated-modem-partition-twrp-backup-t4085329
Click to expand...
Click to collapse
Hi, may I ask which version of Pixel Experience you are using on your Mix 3 5G? I tried to flash one version yesterday and my phone got stuck on the Google icon screen when you first reboot the phone.
Thanks
That is because you didn't format data before flashing. Pay attention, *format data*, not wiping. When you format data you will be requested to type letter by letter *yes*.
draand28 said:
That is because you didn't format data before flashing. Pay attention, *format data*, not wiping. When you format data you will be requested to type letter by letter *yes*.
Click to expand...
Click to collapse
Thank you, I now have it working.
Is video recording working on the latest pixel experience build for you?
I have tried in gcam and in social media apps and video recording is not functioning at all.
Thanks
No, it is not.
benjaminbryce said:
Thank you, I now have it working.
Is video recording working on the latest pixel experience build for you?
I have tried in gcam and in social media apps and video recording is not functioning at all.
Thanks
Click to expand...
Click to collapse
Everything was working fine for me in this pie Pixel Experience rom, Android 10 has issues with the camera and VOIP calls that have yet to be fixed.
https://sourceforge.net/projects/xi...eda-9.0-20200227-1511-UNOFFICIAL.zip/download
Edit: I am running the 78Hz mod on the Pixel Experience rom I linked and it's working really nice!
Hi, can you make It works for the miui 11 beta???i installed the pixel experience rom but the camera doesn't work fine!!
Enviado desde mi Mi MIX 3 5G mediante Tapatalk
Just Reyes on latest pixel ROM with magisk not working screen is lagging a bit and reboots. Any chance this can be updated with Android 10 ?
---------- Post added at 04:31 PM ---------- Previous post was at 04:31 PM ----------
Tried*
Pixel Rom 10.0-20200917 - 78hZmode doesent work, 66hZ works fine
draand28 said:
Hi everyone! I have built a dtbo.img with kernel sources from @Inkypen. With this image you should have 78hz screen refresh rate with a slightly green tint.
Requirements
- TWRP
- Mostly any custom rom, doesn't work on MIUI.
Tested ROMs
Android 11:
Pixel Experience 11 - 66hz
LineageOS 18.1 - 66hz
Havoc 4.1 - 66hz
Android 10:
Pixel Experience Plus 10 - 08/05/2020 - 78hz
Havoc 08/05/2020 78hz
Paradroid 08/05/2020 78hz
LineageOS 08/05/2020 78hz
EvolutionX -78hz (april update)
Usage
- Download dtbo78.img or dtbo66.img
- Reboot to TWRP
- Select Backup>dtbo (just for safety in case something goes wrong or your rom is not yet supported)
- Select Install>Select Image, select dtbo78.img and check "dtbo"
- Reboot
You can also flash it using "fastboot flash dtbo dtbo78.img" in fastboot mode connected to a computer.
WARNING! Use 78hz ONLY for May 2020 builds or older (not june builds, as they are based on a new kernel) for 78HZ.
Use 66hz ONLY for Android 11 builds.
This is based on Unofficial Pixel Experience 10 Build date 08.05.2020 (maintainer @Inkypen). It works fine, testufo shows 77-78hz, not perfectly syincing. I personally daily drive it.
Android 11 mod (66hz) doesn't have a green tint.
Download
Click to expand...
Click to collapse
Wow bootloop custom ROM fluid 1.4 android 11
Hello
here is a Android 10 release of crDroid 6.5 from 16.4.20 for download:
https://yadi.sk/d/TD-kDw6UvZbvoQ
I got it running on my Mi 9T, without any issues.
Even the fingerprint sensor works very fine, its my daily driver.
It has lots of customization options
It is official rom?
Can I flash it on indian k20
I dont think its official.
I am not the developer , but I am very happy with crDroid on my Davinci.
I tested very much other roms, every one had issues with something.
Mostly with the fingerprint sensor or the customization options.
With a backup from your previous system its worth a test
Is it smooth ROM like, for instance, Pixel Expirience? Does ANX Camera works in it? Which gapps do you use on this ROM?
does all functions works ok?
I didnt find anything what is not working.
Pixel Exp. is nothing for me, to less options. But yes, it runs smooth.
The battery life is amazing.
I use opengapps nano, because when pixel launcher is installed the orignal laucher has problems.
And the gcam port from urnyx works very fine. Havent anx cam installed yet.
Volte/vowifi working? And stupid question but does it ask for FP when double tapping a notification or just pin?
Used to use crDroid back in my Samy S2 days so interested to see how its come along.
videoseven said:
I dont think its official.
I am not the developer , but I am very happy with crDroid on my Davinci.
I tested very much other roms, every one had issues with something.
Mostly with the fingerprint sensor or the customization options.
With a backup from your previous system its worth a test
Click to expand...
Click to collapse
Then who is the developer !!!
I found the download with Google.
Dont know whos the dev.
Crdroid is my absolute favorite rom , hope there will be an official build on the crdroid page
@nikc0069
You can unlock with fingerprint or pattern.
How can I test Volte/vowifi ?
Volte is on per default, Wi-Fi calling can be enabled
Found the ROM on 4pda, the develop name is Razziell of that forum, this is the know bugs written on the post:
ANX camera not supported!
After making calls on the bt headset while playing music, you need to reconnect the headset / headphones, since the audio stops playing (the same applies to the GU)
It is better to write about the problems found in telegram (link in the profile) or in qms.
Click to expand...
Click to collapse
Installation instructions:
Requires an unlocked bootloader and the presence of TWRP.
Installed on any stock firmware based on 10 android.
!! The firmware contains its own vendor - you don’t need to install others and it is extremely undesirable !!
It is required to install firmware from global 10 version 11.0.4 / 5 or the latest Chinese dev!
Click to expand...
Click to collapse
If want more information look at his telegram channel
https://t.me/crdavinciunoff
Hi all,
I have created a GSI based on latest PHH AOSP Android 12. Thanks PHH for his great work.
What is LeOS:
1. It's full ungoogled
2. It includes full Working MicroG
3. It includes Seedvauld
4.The beta version is a minimal version which only includes some essential apps. But with an easy install script, you can create a 'full' version with more FOSS apps.
5. available for now arm64bvS, a64bvS. Both in VNDK and VNDK lite available.
6. no google Apps will work !!!!
You can download latest release at
LeOS-Cloud: https://leos-cloud.de/s/JFrFgLgSSTEMtmL /
Proton_drive: https://drive.proton.me/urls/JF352AYSS4#YkXliW8T03Cp
(ProtonDrive needs a bit before download list is showing)
Which variant do I pick
To know which variant to download, use https://play.google.com/store/apps/details?id=com.kevintresuelo.treble . Don't use other Treble Check apps, they'll give wrong informations.
Which vendor to use?
1. Always use your actual device's vendor
2. Always use OEM unmodified vendor, not some custom vendor
3. This includes boot.img. boot.img and vendor MUST BE the same version.
4. Android 10 / 11 / 12 OEM vendor is needed.
LeOS-S is still in Beta and does have some bugs.
Know bugs you will find on PHH release page
-- the su bug I have fixed
Join us a telegram group for support: https://t.me/LeOS_Support
Short overview: http://leos-gsi.de
LeOS is really fantastic and already in early A12 stage usable as a daily driver. For all who are looking for a gsi far away from the Google claws, LeOS is the best decision. Thx for gr8 work.
Hello here!
Great work...thanks.....will try it soon...
Hi there! First of all thank you for great rom. Install it on OnePlus N10 5G. Working great with exeption of some common errors from phh gsi.
Google maps and Signal not recognize micro gms. I enable sig faking already. Would be good if you give me advise how to fix it, because I using some app for my work that relayed on gms.
Annoying pop up from intent filter verification - remove statementservice
Bluetooth connection was fixed by phh setting>audio
boom15 said:
Hi there! First of all thank you for great rom. Install it on OnePlus N10 5G. Working great with exeption of some common errors from phh gsi.
Google maps and Signal not recognize micro gms. I enable sig faking already. Would be good if you give me advise how to fix it, because I using some app for my work that relayed on gms.
Annoying pop up from intent filter verification - remove statementservice
Bluetooth connection was fix by phh setting>audio
Click to expand...
Click to collapse
No google app should work on LeOS. I have removed a lot of google code to get it ungoogled. But gmaps should work in browser.
You have setup the MicroG selftest and location backends?
Signal, you mean it is not registered in MicroG? I don't know / use Signal so I can't say for sure what's wrong and why Gms is needed for it.
Best you will join us in telegram or matrix. Than the other users can help you. As far as I know, we have some Signal users in group
Thank you. Signal works fine but it warns that system missing gms, same with maps. What you use on matrix - Element?
boom15 said:
Thank you. Signal works fine but it warns that system missing gms, same with maps. What you use on matrix - Element?
Click to expand...
Click to collapse
Protonmail is doing the same, but works fine. Alot of apps are doing that. They want have the original goolag play services
I'm using schildichat matrix client.
Hello,
I'm currently running [[AOSP 11.0_r40][all-in-one] microG ufOfficial](https://forum.xda-developers.com/t/aosp-11-0_r40-all-in-one-microg-ufofficial-cve-august-2021-arm32-64-vndklite.4281231/) by @oF2pks.
I'm looking at LeOS-S GSI beta. Features I'm interested in:
* Integrated and fully working MicroG.
* Seedvault included.
* Degoogled as much as possible.
Questions:
* Speaking of aosp / lineage. Is settings -> Accessibility in there i.e. can I sideload TTS voices and Google Accessibility suite or have you also stripped off these when degoogling?
* After flashing LeOS-S, are developer settings and ADB already enabled or do I have to enable them?
* I have Xiaomi Redmi 9 code name gallahad with Android 10 vendor. System partition is part of so called super partition and even with vndklite variant of AOSP I can't make the system mounting read write. Also there is no working TWRP for this device as far as I know. Is there a way to selectivelly disable or reenable the root features with LeOS-S? phh-securize needs an ability to write to system partition, can I make it work somehow?
* Initially I'd like to restore my backups using adb and copying files as root. Then I'd like to disable root so I can run banking apps and use seedvault for backing up my apps.
* As for seedvault will it only backup apps which can be backed up with ADB or can it backup all user installed apps along with their data? For example FairEmail can't be backed up using ADB.
* I think LeOS-S is now based off of lineage. Can lineage call recording be made to work? Or alternativelly is there a way to install axet call recorder as a system app?
I'm going to backup my stuff and try out these things for my-self one after the other. If I can get some hints I'll appreciate it and I might be able to make it work.
Thanks for great rom
Greetings
pvdeejay said:
Hello,
I'm currently running [[AOSP 11.0_r40][all-in-one] microG ufOfficial](https://forum.xda-developers.com/t/aosp-11-0_r40-all-in-one-microg-ufofficial-cve-august-2021-arm32-64-vndklite.4281231/) by @oF2pks.
I'm looking at LeOS-S GSI beta. Features I'm interested in:
* Integrated and fully working MicroG.
* Seedvault included.
* Degoogled as much as possible.
Questions:
* Speaking of aosp / lineage. Is settings -> Accessibility in there i.e. can I sideload TTS voices and Google Accessibility suite or have you also stripped off these when degoogling?
* After flashing LeOS-S, are developer settings and ADB already enabled or do I have to enable them?
* I have Xiaomi Redmi 9 code name gallahad with Android 10 vendor. System partition is part of so called super partition and even with vndklite variant of AOSP I can't make the system mounting read write. Also there is no working TWRP for this device as far as I know. Is there a way to selectivelly disable or reenable the root features with LeOS-S? phh-securize needs an ability to write to system partition, can I make it work somehow?
* Initially I'd like to restore my backups using adb and copying files as root. Then I'd like to disable root so I can run banking apps and use seedvault for backing up my apps.
* As for seedvault will it only backup apps which can be backed up with ADB or can it backup all user installed apps along with their data? For example FairEmail can't be backed up using ADB.
* I think LeOS-S is now based off of lineage. Can lineage call recording be made to work? Or alternativelly is there a way to install axet call recorder as a system app?
I'm going to backup my stuff and try out these things for my-self one after the other. If I can get some hints I'll appreciate it and I might be able to make it work.
Thanks for great rom
Greetings
Click to expand...
Click to collapse
question 1:
sure, all google sh...t is removed. TTS is replaced with open source app from e.foundation
2. you have to enable them as on every other rom/GSI
3. you can flash LeOS-S on devices with Android 10 or 11 vendor
4. seedvault is integrated, but I'm not sue that the restore will work when swapping the OS
5. You can remove root be with an integrated option
6. LeOS-R is based on LOS18.1 and LeOS-S is based on AOSP
axet call recorder I don't know. Call recording is not allowed on most european countries. So I never have used such thing.
I'm using true phone on my personal build and it's including a call recorder
I prefer joining my telegram group. there we can chat and you can get help from whole community
EDIT: MicroG is full integrated
harvey186 said:
Hi all,
I have created a GSI based on latest PHH AOSP Android 12. Thanks PHH for his great work.
What is LeOS:
1. It's full ungoogled
2. It includes full Working MicroG
3. It includes Seedvauld
4.The beta version is a minimal version which only includes some essential apps. But with an easy install script, you can create a 'full' version with more FOSS apps.
5. available for now arm64bvS, a64bvS. Both in VNDK and VNDK lite available.
6. no google Apps will work !!!!
You can download latest release at https://leos-gsi.de/downloads
Which variant do I pick
To know which variant to download, use https://play.google.com/store/apps/details?id=com.kevintresuelo.treble . Don't use other Treble Check apps, they'll give wrong informations.
Which vendor to use?
1. Always use your actual device's vendor
2. Always use OEM unmodified vendor, not some custom vendor
3. This includes boot.img. boot.img and vendor MUST BE the same version.
4. Android 10 / 11 / 12 OEM vendor is needed.
LeOS-S is still in Beta and does have some bugs.
Know bugs you will find on PHH release page
-- the su bug I have fixed
Join us a telegram group for support: https://t.me/LeOS_Support
Short overview: http://leos-gsi.de
Click to expand...
Click to collapse
can I use an unofficial Treble patch?
AltFantasy said:
can I use an unofficial Treble patch?
Click to expand...
Click to collapse
Phh treble patches are included. Do you have different patches?
harvey186 said:
Phh treble patches are included. Do you have different patches?
Click to expand...
Click to collapse
I'm using this one: https://forum.xda-developers.com/t/...e-for-xiaomi-redmi-4a-amp-5a-unified.3789814/
AltFantasy said:
I'm using this one: https://forum.xda-developers.com/t/...e-for-xiaomi-redmi-4a-amp-5a-unified.3789814/
Click to expand...
Click to collapse
I think that are patches for treblize the device because it's so old, that is not original treble device.
You can't try with A12 GSI. A12 is only as a/b version available
Has arm or arm64 a-only GSIs been fully discontinued since release a12?
Skippy12359 said:
Has arm or arm64 a-only GSIs been fully discontinued since release a12?
Click to expand...
Click to collapse
yes, in the moment no way to build a-only or arm versions. Sorry, it's a Google 'feature'
harvey186 said:
yes, in the moment no way to build a-only or arm versions. Sorry, it's a Google 'feature'
Click to expand...
Click to collapse
Thanks
Hello, can Google Photos work with the support of MicroG?
harvey186 said:
I think that are patches for treblize the device because it's so old, that is not original treble device.
You can't try with A12 GSI. A12 is only as a/b version available
Click to expand...
Click to collapse
so it's only either A-only, or B-only? my device is A only
AltFantasy said:
so it's only either A-only, or B-only? my device is A only
Click to expand...
Click to collapse
Android12 is only as a/b version available and I don't know if there will be a a-only version in future. Sorry
Android devices are a-only or a/b devices. There is no b-only.